ARTESYN SMT15F-12S1V2J

Embedded Power for Business-Critical Continuity Rev.06.28.07 SMT15F_12_FIXED 1 of 5 SMT15F Series 12 Vin single fixed output Total Power: 15.0 W Input Voltage: 10.8-13.2 Vdc # of Outputs: Single Special Features • Designed to meet ultra fast The SMT15F-12 series are non-isolated dc-dc converters packaged transient requirements: in a surface-mount footprint giving designers a cost effective 300 A/μs step load transients • 15 A Current rating solution for conversion from a 12 V source. The SMT15F-12 has an • Input voltage range: 10.8 Vdc to 13.2 Vdc input range of 10.8 Vdc to 13.2 Vdc and offers an output voltage • Output voltage range: range from 1.0 Vdc to 1.8 Vdc with a 15 A load, which allows for 1.0 Vdc to 1.8 Vdc • Extremely low internal maximum design flexibility and a pathway for future upgrades. power dissipation The SMT15F-12 is designed for applications that include • Minimal thermal design concerns distributed power, workstations, optical network and wireless • Ideal solution where board space is at a premium or applications. Implemented using state of the art surface-mount tighter card pitch is required technology and automated manufacturing techniques, the • Industry standard surface-mount footprint SMT15F-12 offers compact size and efficiencies of up to 88% • Available RoHS compliant at 1.8 Vout. • 2 year warranty Safety UL/cUL CAN/CSA 22.2 No. E174104 UL 60950 File No. E174104 TÜV Product Service (EN60950) Certificate No. B 04 04 38572 CB report and certificate to IEC60950 DE3-52484 Embedded Power for Business-Critical Continuity Rev.06.28.07 SMT15F_12_FIXED Specifications 2 of 5 All specifications are typical at nominal input, full load at 25°C unless otherwise stated. OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability (Trimmable) ±10% Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-6 Setpoint accuracy ±2.5% typ. Radiated immunity EN61000-4-3 Line regulation ±1.0% typ. GENERAL SPECIFICATIONS Load regulation ±1.0% typ. Efficiency Vin = 12 V, Vout = 1.8 V 88% typ. Total error band ±3.0% typ. Insulation voltage Non-isolated Minimum load 0 A Switching frequency Variable 700 kHz typ. Overshoot/undershoot None Vin = 12 V, Vout = 1.2 V Ripple and noise 5 Hz to 20 MHz 40 mV pk-pk Approvals and EN60950 25 mV rms standards UL/cUL60950 Temperature co-efficient ±0.01%/°C Material flammability UL94V-0 Transient response di/dt 200 A/μs 7.5 A load step Dimensions (LxWxH) 33.02 x 13.46 x 7.57 mm (1.2 Vout) (See Note 3) 50 mV max. deviation 1.3 x 0.53 x 0.298 inches <10 μs recovery to within ±1.0% Weight 7 g (0.25 oz) Remote sense 10% Vo compensation Coplanarity 100 μm MTBF Telcordia SR-332 16,529,000 hours INPUT SPECIFICATIONS Input voltage range 10.8 Vdc to 13.2 Vdc ENVIRONMENTAL SPECIFICATIONS Input current No load 100 mA Thermal performance Operating ambient, -40 °C to +85 °C (See Figure 1) temperature Input current (max.) 2.0 A max. @ Io max. Non-operating -40 °C to +125 °C and Vout = 1. 2 V PROTECTION Input reflected ripple 100 mA rms Short-circuit Continuous Remote ON/OFF (See Note 1) Thermal Automatic recovery Start-up time 5 ms Embedded Power for Business-Critical Continuity Rev.06.27.07 Rev.06.28.07 Specifications SMT15F_12_FIXED 3 of 5 All specifications are typical at nominal input, full load at 25°C unless otherwise stated. OUTPUT OUTPUT OUTPUT REGULATION INPUT OUTPUT EFFICIENCY MODEL POWER CURRENT CURRENT (1,4,5) VOLTAGE VOLTAGE (TYP.) NUMBER LINE LOAD (MAX.) (MIN.) (MAX.) 15.0 W 10.8-13.2 Vdc 1 Vdc 0 A 15 A 85% ±1.0% ±1.0% SMT15F-12S1V0J 18.0 W 10.8-13.2 Vdc 1.2 Vdc 0 A 15 A 86% ±1.0% ±1.0% SMT15F-12S1V2J 22.5 W 10.8-13.2 Vdc 1.5 Vdc 0 A 15 A 87% ±1.0% ±1.0% SMT15F-12S1V5J 27.0 W 10.8-13.2 Vdc 1.8 Vdc 0 A 15 A 88% ±1.0% ±1.0% SMT15F-12S1V8J Part Number System with Options SMT15F-12S1V2J (4) Packaging Options Product Family J = Pb-free (RoHS 6/6 compliant) SMT = Surface Mount Rated Output Current Output Voltage 15 = 15 Amps 1V0 = 1.0 V, 1V2 = 1.2 V etc. Performance Type of Output F = Enhanced/Fast Transient S = Single Performance W = Fixed Input Voltage 12 = 10.8 Vdc to 13.2 Vdc Notes 1 The SMT15F-12 features an ‘Active High’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT15F-12: Configuration Converter Operation Remote pin open circuit Unit is ON Remote pin pulled low Unit is OFF Remote pin pulled high Unit is ON An ‘Active Low’ Remote ON/OFF version is also possible with this converter. To order please place the Suffix ‘R’ towards the end of the part number, e.g. SMT15F-12S1V8RJ. 2 A 270 μF electrolytic input capacitor maybe required for test purposes only. 3 An external output capacitor is not required for basic operation. Adding distributed capacitance at the load will improve the transient response. 4 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 5 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. Embedded Power for Business-Critical Continuity Rev.06.28.07 SMT15F_12_FIXED Specifications 4 of 5 All specifications are typical at nominal input, full load at 25°C unless otherwise stated. 16 14 12 10 Nat conv 8 200 LFM 400 LFM 6 4 2 0 0 10 20 30 40 50 60 70 80 TEMPERATURE (ºC) Figure 1 - Derating Curve Figure 2 - Typical Transient Response, Vin = 12 V, Output Voltage = 1.2 V (See Note A) (Vin = 12 V, Output Current = 1.2 V), 7.5 A Load Step Change; Slew Rate = 200 A/μs Channel 1: Voltage Deviation = 45 mV; Recovery Time = 10 μs +Vsense Vin Vout SMT15F Rtrimdown R Load Trim pin Rtrimup ON/OFF Common Figure 3 - Typical Transient Response, Figure 4 - Standard Application (Vin = 12 V, Output Current = 1.2 V), 7.5 A Load Step Change; Slew Rate = 200 A/μs Channel 1: Voltage Deviation = 46.8 mV; Recovery Time = 10 μs Notes A The derating curve represents the conditions at which internal components are within the Artesyn derating guidelines. OUTPUT CURRENT (A) Embedded Power for Business-Critical Continuity Rev.06.28.07 SMT15F_12_FIXED 5 of 5 Americas 5810 Van Allen Way TOP VIEW Carlsbad, CA 92008 0.039 (1.00) USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 0.530 ±0.010 0.039 (1.00) (13.46 ± 0.25) Europe (UK) 0.190 Waterfront Business Park 0.310 0.190 (4.83) Merry Hill, Dudley (7.87) (4.83) 0.190 0.297 1.300±0.010 (33.02 ±0.25) (4.83) (7.54) West Midlands, DY5 1LX United Kingdom GND Vout Trim Sense Telephone: +44 (0) 1384 842 211 0.405 (10.29) 0.430 (10.92) Facsimile: +44 (0) 1384 843 355 0.075 (1.91) Asia (HK) Remote SIDE VIEW +Vin ON/OFF 16th - 17th Floors, Lu Plaza BOTTOM VIEW 2 Wing Yip Street, Kwun Tong 0.048 (1.22) Kowloon, Hong Kong Telephone: +852 2176 3333 Seating Plane Facsimile: +852 2176 3888 0.298 (7.57) Installed Ht. For global contact, visit: Connector (6PL) All dimensions in inches (mm) www.powerconversion.com Width: 0.112 ± 0.003 (2.84 ± 0.08) All tolerance ±0.010in (±0.25mm) Length: 0.062 ± 0.002 (1.57 ± 0.04) unless otherwise stated technicalsupport@powerconversion.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims Figure 5 - Mechanical Drawing all liability for damages resulting from use of this information or for any errors or omissions. PIN CONNECTIONS Emerson Network Power. The global leader in enabling PIN NUMBER FUNCTION business-critical continuity. 1+Vin AC Power 2GND Connectivity 3 +Vout DC Power Embedded Power 4Trim Inbound Power 5 +Vsense Integrated Cabinet Solutions 6 Remote ON/OFF Outside Plant Precision Cooling Site Monitoring and Services Figure 5 - Mechanical Drawing and Pinout Table EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co.