ARTESYN SMT30C-12SADJJ

POWER SMT30C Series Data Sheet C-Class Non-Isolated Total Power: 30 Watts Input Voltage: 10.2 - 13.8 Vdc # of Outputs: Single SPECIAL FEATURES ƒ 30 A current rating ƒ Input voltage range: 10.2 - 13.8 Vdc ƒ Output voltage range: Electrical Specifications 0.9 - 5.0 V Input ƒ Industry-leading value Input voltage ra nge Nominal 12 V 10.2 - 13.8 Vdc ƒ Cost optimized design Input current Minimum load 230 mA ƒ Excellent transient response Remote OFF 30 mA ƒ Output voltage adjustability Input current (max.) (See Note 4) 13.8 A max. @ Io max. and Vin = 10.8 V ƒ Path for future upgrades Input reflected ripple (See Note 2) 150 mA (pk-pk) ƒ Supports silicon voltage migration Remote ON/OFF ƒ Reduced design-in and qual time Logic compatibility Positive logic ƒ Designed-in reliability: MTBF of >4 ON >2.4 Vdc OFF <0.8 Vdc million hours per Telcordia SR-332 Start-up time Power up <30 ms ƒ Available RoHS compliant (See Note 5) Remote ON/OFF <30 ms ƒ Two year warranty Turn ON threshold 9.0 Vdc Turn OFF threshold 7.6 Vdc SAFETY Output ƒ UL, cUL CAN/CSA 22.2 No. 60950 Voltage adjustability (See Note 1) 0.9 - 5.0 Vdc ƒ UL 60690 File No. E139421 Output setpoint accuracy 1.0% trim resistors ±3% ƒ TÜV Product Service Line regulation Low line to high line ±0.2% (EN60950:2000) ƒ Certificate No. B 04 08 19870 228 Load regulation Full load to min. load ±1.0% ƒ CB report and certificate to Min/Max load 0 A/30A IEC60950-US/6415C/UL Overshoot At turn-on 1.0% max. Undershoot At turn-off 100 mV max. Ripple and noise 5 Hz to 20 MHz 50 mV pk-pk (See Note 2) 14 mV rms Transient response (See Note 3) 75 mV max. deviation 150 μs recovery to within regulation band Current share Full load ±10% All specifications are typical at nominal input Vin = 12 V, full load at 25 °C unless otherwise stated. SMT30C Data Sheet General Specifications Environmental Specifications Efficiency 91% Thermal performance Operating ambient temperature -0 °C to +80 °C (See Note 8) Non-operating temperature -40 °C to +125 °C Switching frequency Fixed 300 kHz Protection Approvals and (See Note 7) TÜV Product Services standards IEC60950, UL/cUL60950 Short-circuit Foldback, non latching Material flammability UL94V-0 Over-temperature Hiccup, non latching Weight 28.3 g (1 oz) Recommended System Capacitance Coplanarity 150 μm Input capacitance (See Note 9) 270 μF / 20 mW ESR max. MTBF Telcordia SR-332 4,456,655 hours Output capacitance (See Note 9) 680 μF / 10 mW ESR max. Ordering Information Regulation Model Output Power Input Output Output Current Output Current Efficiency (11) Number (Max.) Voltage Voltage (Min.) (Max.) (Typical) Line Load SMT30C-12SADJJ 150 W 10.2 - 13.8 Vdc 0.9 - 5.0 V 0 A 30 A 91% ±0.2% ±1.0% Part Number System with Options Product Family Rated Output Performance Input Voltage Number of Packaging Current Outputs Options SMT 30 C - 12 SADJ J 30 = 30 Amps C = Cost Optimized 12 = 10.2 - 13.8 Vdc SADJ = Single J = Pb free (RoHS SMT = Surface Mount Adjustable Output 6/6 compliant) Notes: Output Voltage Adjustment 1. Uses external resistor from TRIM to ground. See Application Note 170 for details. The ultra-wide output voltage trim range offers major advantages to users 2. Measured with external filter. See Application Note 170 for details. who select the SMT30C series. It is no longer necessary to purchase a variety 3. di/dt = 10 A/μs, Vin = Nom, Tc = 25 ºC, load change = 0.50 lo max. to 0.75 lo max, and vice versa. of modules in order to cover different output voltages. The output voltage can 4. External input fusing recommended. be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT30C series converter leaves the factory the output has been adjusted to the default 5. Power up is the time from application of dc input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. voltage of 0.9 V. 6. Signal line assumed <3 m in length. 7. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8. See Application Note 170 for operation above 50 ºC. 9. See Application Note 170 for more details. 10. For redundant current sharing applications that use ORing diodes to separate the outputs, please add the suffix ‘-S’ to the part number, e.g. SMT30C-12SADJ-SJ. Please refer to Application Note 170 for further details. 11. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/power to find a suitable alternative. SMT30C Data Sheet Mechanical Drawings Mating Connectors 2.280 Pin Assignments (57.91) Pin Function 1 Current Share 2 Trim 3 Ground 4 Ground 5 Ground 6 Sense- 7 Sense+ 8 Remote ON/OFF 0.43 9 Power Good (10.8) 10 Vin 11 Vin 12 Vout Seating Plane 0.011 13 Vout (0.27) Typ 0.105 0.062 14 Ground (2.67) (1.57) PCB REF 15 Vout 2.100 (53.34) 16 Ground 0.090 17 Mechanical Support (2.29) 0.045 PIN 16 15 x 0.140 PIN 1 18 Mechanical Support (1.13) (3.56) All dimensions in inches (mm) PIN 18 0.485 1.140 All tolerance ±0.010in (±0.25mm) PIN 17 (12.33) (28.96) unless otherwise stated WORLDWIDE OFFICES Asia (HK) Americas Europe (UK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park 2 Wing Yip Street Tempe, AZ 85282 Merry Hill, Dudley Kwun Tong, Kowloon USA West Midlands, DY5 1LX Hong Kong +1 888 412 7832 United Kingdom www.artesyn.com +852 2176 3333 +44 (0) 1384 842 211 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn For more information: www.artesyn.com/power Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use For support: productsupport.ep@artesyn.com of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. SMT30C Series 09Apr2015 2 x 1.345 (3417) 1.450 (36.83)