ARTESYN SMT30E-12W3V3J

POWER SMT30E Series Data Sheet E-Class Non-Isolated Total Power: 99 Watts Input Voltage: 8 - 14 Vdc # of Outputs: Single SPECIAL FEATURES ƒ 30 A current rating ƒ Input voltage range: 8 - 14Vdc ƒ Output voltage range: 0.8 - 3.63 V ƒ Ultra high efficiency: 91% @ 12 Vin and 3.3 Vout Electrical Specifications ƒ Extremely low internal power dissipation Input ƒ Minimal thermal design concerns Input voltage ra nge 8 - 14 Vdc ƒ Designed in reliability: MTBF of Input current No load (max.) 250 mA >3.2 million hours per Telcordia Input current (max.) 9.2 A max. @ Io max. SR-332 and Vout = 3.3 V ƒ Ideal solution where board space Input reflexted ripple 220 mA rms is at a premium or tighter card Remote ON/OFF See Note 1 pitch is required Start-up time 20 ms ƒ Industry standard surface-mount footprint Output ƒ RoHS compliant Voltage adjustability 0.8 to 3.63 Vdc ƒ Two year warranty Setpoint accuracy ±1.3% typical Line regulation ±0.2% typical SAFETY Load regulation ±1.5% typical ƒ UL, cUL CAN/CSA 22.2 No. Total error band ±3.0% typical EI74104 Overshoot/undershoot None ƒ UL 60950-1 File No. EI74104 Ripple and noise 5 Hz - 20 MHz 60 mV pk-pk ƒ TÜV Product Service (EN60950) 25 mV rms Certificate No. B05 06 38572 055 Temperature coefficient ±0.01%/ °C ƒ CB report and certificate to Transient response Vout = 1.5 V 50% - 75% load step IEC60950 Slew rate = 0.5 A μs 3% max. deviation; 10 μs recovery to within ±1% All specifications are typical 12 Vin and 1.5 Vout, full load at 25 °C unless otherwise stated. Cout = 100 μF SMT30E Series Data Sheet EMC Characteristics General Specifications Electrostatic discharge EN61000-4-2, IBC801-2 Efficiency @12 Vin, 3.3 Vout 91% Conducted immunity EN61000-4-6 Insulation voltage Non-isolated Radiated immunity EN61000-4-3 Switching frequench Fixed 1.3 MHz Approvals and standards EN60950, UL/cUL60950 Material flammability UL94V-0 Environmental Specifications Dimensions L x W x H 33.02 x 13.46 x 8.10 mm Thermal performance Operating ambient temperature -40 °C to +85 °C 1.3 x 0.53 x 0.319 inches Non-operating temperature -40 °C to +125 °C Weight 6.3 g (0.22 oz) MSL Level 3 MTBF Telcordia SR-332 3,289,053 hours Protection Short-circuit Continuous Thermal Automatic recovery Ordering Information Regulation Model Output Power Input Output Output Current Output Current Efficiency Number (Max.) Voltage Voltage (Min.) (Max.) (Typical) Line Load SMT30E-12W3V3-J 99W 8 - 14 Vdc 0.8 - 3.63 V 0 A 30 A 91% ±0.2% ±1.5% Part Number System with Options Product Family Performance Input Voltage Type of Outputs Output Voltage Packaging Options Rated Output Current SMT 30 E - 12 W 3V3 - J No “T” suffix = Pb-free SMT = Surface 30 = 30 Amp E = Enhanced perfor- 12 = 8 - 14 Vdc W = Wide 0.8 - 3.63 Vdc RoHS 6/6 compliant mount mance in trays -TJ - Pb-free RoHS 6/6 compliant in tape and reel Notes: Output Voltage Adjustment 1. The SMT30E features a ‘Positive Logic’ Remote ON/OFF operation. If not using the Remote ON/ OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to The ultra-wide output voltage trim range offers major advantages to users ground. The following conditions apply for the SMT30E: who select the SMT30E-12W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output Configuration Converter Operation voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the Remote pin open circuit Unit is ON SMT30E-12W3V3Jconverter leaves the factory the output has been adjusted Remote pin pulled low [Von/off < 0.8 V] Unit is OFF to the default voltage of 0.8 V. Remote pin pulled high [Von/off >2.8 V] Unit is ON A ‘Negative Logic’ Remote ON/OFF version is also possible with this converter. Please consult the factory for details. 2. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/power to find a suitable alternative. A. The derating curve represents the condition at which internal components are within the Artesyn derating guidelines. B. Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. SIL30E Series Data Sheet 40 40 30 30 0m/s 0m/s 20 20 1m/s 1m/s 2m/s 2m/s 10 10 0 0 0 20 40 60 80 0 20 40 60 80 AMBIENT TEMPERATURE (ºC) AMBIENT TEMPERATURE (ºC) Figure 2 - Derating Curve Figure 1 - Derating Curve Vin = 12 V, Output Voltage = 1.5 V (See Note A) Vin = 12 V, Output Voltage = 1.0 V (See Note A) 40 40 30 30 0m/s 0m/s 20 20 1m/s 1m/s 2m/s 2m/s 10 10 0 0 0 20 40 60 80 0 20 40 60 80 AMBIENT TEMPERATURE (ºC) AMBIENT TEMPERATURE (ºC) Figure 4 - Derating Curve Figure 3 - Derating Curve Vin = 12 V, Output Voltage = 1.8 V (See Note A) Vin = 12 V, Output Voltage = 2.5 V (See Note A) 100 80 Vout = 1.0 V Vout = 1.5 V 60 Remote sense + Vout = 1.8 V 2 V 6 Vout = 2.5 V in V out 40 Vout = 3.3 V 4 SMT30E Remot e 1 20 ON/OFF Trim 3 5 Load C 100F 0 C 47F out in R (Required) TRI M 0 5 10 15 20 25 30 Gnd OUTPUT CURRENT (A) Figure 6 - Standard Application Figure 5 - Efficiency vs Load Current Vin = 12 V (See Note B) OUTPUT CURRENT (A) EFFICIENCY (%) OUTPUT CURRENT (A) OUTPUT CURRENT (A) OUTPUT CURRENT (A) SMT30E Series Data Sheet Mechanical Drawings Pin Assignments 0.190 [4.83] Pin Function 0.310 [7.87] 0.190 [4.83] TOP VIEW 0.190 [4.83] 1 Remote ON/OFF 0.297 [7.54] 0.039 [1.00] 2 Remote Sense 3 Trim 4 +Vout GND +Vout Trim Sense 5 Ground 6 +Vin +Vin Remote 1.3000.010 [33.020.25] BOTTOM VIEW ON/OFF 0.048 [1.22] SIDE VIEW SEATING PLANE 0.319 [8.10] max. INSTALLED HT. CONNECTOR (6 PL) WIDTH : 0.112 0.003 [2.840.08] LENGTH : 0.062 0.0016 [1.570.04] All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated WORLDWIDE OFFICES Asia (HK) Americas Europe (UK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park 2 Wing Yip Street Tempe, AZ 85282 Merry Hill, Dudley Kwun Tong, Kowloon USA West Midlands, DY5 1LX Hong Kong +1 888 412 7832 United Kingdom www.artesyn.com +852 2176 3333 +44 (0) 1384 842 211 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn For more information: www.artesyn.com/power Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use For support: productsupport.ep@artesyn.com of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. SMT30E Series 09Apr2015 0.5300.010 [13.460.25] 0.039 [1.00] 0.430 [10.92] 0.405 [10.29] 0.075 [1.91]