S Series Slide Switches Features/Benefits Typical Applications • 6 to 15 AMPS • Portable tools • Enclosed housing • Small appliances • PC and Snap-in panel mounting • Floor care products • Reversing option • RoHS compliant Models Available Specifications Materials CONTACT RATING: Q contact material (S1XX, S2XX Models): HOUSING: 6/6 nylon (UL94V-2), black. I 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ TOP PLATE: 6/6 nylon (UL94V-2), black. 125 V DC . (S5XX, S6XX Models): 12 AMPS @ ACTUATOR: 6/6 nylon (UL94V-2), black (standard). 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC . CONTACTS: Q contact material: Copper, silver plated. See page (S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @ I-32 for additional contact materials. 250 V AC . See page I-32 for additional ratings. TERMINALS: Q contact material: Copper, silver plated. See page ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. I-32 for additional contact materials. CONTACT RESISTANCE: Below 10 m Ω typ. initial CONTACT SPRING: Music wire or stainless steel. @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. TERMINAL SEAL: Epoxy. 9 INSULATION RESISTANCE: 10 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. OPERATING TEMPERATURE: -30ºC to +65ºC NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. STORAGE TEMPERATURE: -30ºC to +85ºC Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I–29 through I–32. For additional options not shown in catalog, consult Customer Service Center. Switch Function S101 SPST, 6 AMPS S202 (DPDT, 6 AMPS Actuator S802 DPDT, 15 AMPS 03 .335" high S102 SPDT, 6AMPS 04 .500" high S112 SPDT, mom., 6 AMPS 09 .250" high Detent S201 DPST, 6 AMPS 12 Screwdriver slot S602 DPDT, 12 AMPS 1 With detent (with marking) S701 SPST, 15 AMPS 2 Without detent 13 Screwdriver slot S702 SPDT, 15 AMPS Mounting Style (without marking) SS Panel with mounting ears C2 Black cap MS PC thru-hole C3 Red cap S2 Snap-in panel with blacktop plate C5 Yellow cap TS Panel with mounting ears Terminations 03 Solder lug with hole Housing Markings 02 PC Thru-hole NONE No markings 04 PC Thru-hole D ON-OFF 07 Quick connect L ON 08 PC Thru-hole M ON-OFF WC Wire lead N Red rectangle on one end Contact Material Q Silver B Gold Seal G Gold over silver NONE No seal E Epoxy seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com I–28 Slide Slide S Series Slide Switches SWITCH FUNCTION AVAILABLE AVAILABLE NO. MODEL AMP SWITCH MOUNTING NO. MODEL AMP SWITCH MOUNTING POLES NO. RATING FUNCTION SCHEMATIC STYLES POLES NO. RATING FUNCTION SCHEMATIC STYLES S101 6 SPSTSS S201 6 DPST MS,SS,TS 6 SPDT MS,SS S102 SP S202 6 DPDT MS,SS, TS 6 SPDT-MOM. MS,SS DP S112 S701 15 SPST S1,S2,S3,ST S602 12 DPDT MS,SS, TS I S702 15 SPDT S1,S2,S3,ST S802 15 DPDT S1,S2,S3,ST SPST DPDT Part number shown: S202031SS03Q Part number shown: S101031SS03Q NOTE: and MOM. in table indicates momentary action. All models with all options when ordered with ‘G’ or ‘Q’ contact material. Contacts make on side actuator thrown. ACTUATOR 03 .335" HIGH 04 .500" HIGH 09 .250" HIGH 12 SCREWDRIVER SLOT 13 SCREWDRIVER SLOT (WITH MARKING) (WITHOUT MARKING) .062 .062 (1,57) (1,57) NOTE: Standard actuator color is black, other colors available, consult Customer Service Center. Alternate heights White 115-230 markings (std.). Without markings. are available with ‘03, 04 and 09’ actuators, consult Customer Service Center. Models with S2 mounting style, subtract .090 (2, 29). Actuators ‘12’ and ‘13’ are available with DPST and DPDT models only. C2; C3; C5 SNAP-ON CAP NOTE: Actuator finish: matte. OPTION C1-CT CAP If no color is specified, black will be CODE2 COLOR supplied. Colored actuator caps may also be ordered separately and user C2 BLACK installed, see page I-32. C3 RED C5 YELLOW Available with S2 mounting style only. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com I–29 S Series Slide Switches DETENT 1 WITH DETENT Standard with all maintained models: S101, S102, S201, S202, S602, S701, S702, and S802. 2 WITHOUT DETENT Standard with all momentary models: S112. MOUNTING STYLE SS PANEL WITH MOUNTING EARS I PANEL MOUNTING AVAILABLE WITH: Models: S101, S102, S112, S201, S202 and S602 Terminations: All except 08 Actuators: 03, 04, 09, 12* and 13*. *12 and 13 actuators not available with S1XX models. S202031SS03Q DPDT MS PC THRU-HOLE AVAILABLE WITH: Models: S101, S102, S112, S201, S202, S602 Terminations: 02, 04 and 08 Actuators: 03, 04, 09, 12* and 13* *12 and 13 actuators available with S201, S202 and S602 models only. PC MOUNTING For mounting information, see S202031MS02Q TERMINATIONS section, page I-31. DPDT S2 SNAP-IN PANEL PANEL MOUNTING .330 (8,38) S802C21S207Q PANEL THICKNESS: .020(0,57)–.200(5,08) DPDT AVAILABLE WITH: Models: S701, S702, and S802 Terminations: 04, 07, 57 and WC Actuators: C2, C3, C5 and 03 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com I–30 Slide Slide S Series Slide Switches MOUNTING STYLE TS PANEL WITH MOUNTING EARS PANEL MOUNTING S202031TS03Q DPDT AVAILABLE WITH: Models: S201, S202, and S602 I Terminations: All Actuators: 03, 04 and 12. TERMINATIONS 03 SOLDER LUG WITH HOLE 02 PC THRU-HOLE 04 PC THRU-HOLE PC MOUNTING 02 & 04 terminations Recommended with ‘MS’ Recommended with double pole mounting style only. models only. 07 QUICK CONNECT 08 PC THRU-HOLE WC WIRE LEAD .113 ± .015 (2,87 ± 0,38) .051 .118 ± .015 (1,30) (3,00 ± 0,38) 08 terminations with MS mounting style. .368 ± .015 (9,35 ± 0,38) .140 (3,56) .503 ± .015 (12,78 ± 0,38) 18 AWG wire for S1XX and S2XX models. 16 AWG wire for all other models. Black MS mounting style only. wire standard, other colors and lengths available, consult Customer Service Center. UL style 1015. NOTE: All terminals on S1XX, S2XX and S6XX models are .020 (0,51) thick; all terminals on S7XX and S8XX models are .031 (0,79) thick. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com I–31 S Series Slide Switches TOP PLATE MARKINGS NONE NO MARKINGS D ON-OFF L ON M ON-OFF N RED RECTANGLE ON ONE END NOTE: Top plate markings are available with ‘S2’ mounting style only. The marking color Note: Orientation of on all top plates with marking options ‘D, L and M’ is white, standard. (except white top plates: marking actuator markings color is black, standard). The marking color on all top plates with ‘N’ marking option is red, standard. and terminals. I Other marking colors are available, consult Customer Service Center. CONTACT MATERIAL OPTION CONTACT CODE MATERIAL RATINGS S1XX, S2XX MODELS: 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC S6XX MODELS: 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 2 Q SILVER POWER 1 AMP @ 125 V DC S7XX, S8XX MODELS: 15 AMPS @ 125 V AC; 6 AMPS @ 250 V AC 1 B GOLD LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @20 V AC OR DC max. S1XX, S2XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC GOLD OVER LOW LEVEL/DRY G 3 S6XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR SILVER CIRCUIT OR POWER 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC S7XX, S8XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 15 AMPS @ 125 V AC; 6 AMPS @ 250 V AC * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. All models with all options when ordered with ‘G’ or ‘Q’ contact material. 2 CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). 3 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate. NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials. SEAL NONE NO SEAL E EPOXY SEAL EPOXY .075 MAX. (1,91) AVAILABLE HARDWARE Cap, C2; C3 actuators Cap, 03 actuator PART NO. PART NO. 121160100 WHITE 121000101 WHITE 121160200 BLACK 121000102 BLACK 121160300 RED 121000103 RED Material: 6/6 Nylon Material: 6/6 Nylon Finish: Matte Finish: Gloss NOTE: Other cap colors available, consult Customer Service Center. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com I–32 Slide