Rocker DA Series Miniature Single Pole Rocker Switches Features/Benefits Typical Applications • Nice actuator styling with • Small appliances multiple options • Computers and peripherals • Guards to prevent accidental • Medical instrumentation actuation • Momentary and maintained functions • IP65 splash proof rubber boot option • RoHS compliant UL 61058-1 Specifications Materials CONTACT RATING: HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish. 16 AMPS @ 125 VAC, 1/3 HP; ILLUMINATED ACTUATOR: Polycarbonate, matte finish. 10 AMPS @ 250 VAC, 1/2 HP. CENTER CONTACTS: Silver plated, copper alloy. 10 AMPS @ 125 VAC, 6 AMPS @ 250 VAC. END CONTACTS: Silver plated. ELECTRICAL LIFE: 10,000 make and break cycles at full load. ALL TERMINALS: Silver plated, copper alloy. 8 INSULATION RESISTANCE: 10 Ω min. DIELECTRIC STRENGTH: 1,500 VRMS @ sea level. NOTE: Specifications and materials listed above are for switches with standard options. OPERATING TEMPERATURE: -20ºC to +85ºC For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-57 through G-59. For additional options not shown in catalog, consult Customer Service Center. Switch Function DA101 SPDT On-None-On Actuator DA102 SPST On-None-Off J1 Rocker DA103 SPDT On-Off-On J2 Two-tone rocker *, **J3 Illuminated rocker ** J4 Circle, illuminated rocker ** J5 Oval, illuminated rocker Actuator Color 1-5 See Chart on Page G-59 *R Red, illuminated *A Amber, illuminated * Actuator “J3” illuminated switches are *G Green, illuminated not available with actuator markings ** Actuator “J3”, “J4” and “J5” are not available with Termination option “17” Mounting Style/Color solder lug S2 Snap-in, black S1 Snap-in, white B2 Recessed snap-in bracket, black G2 Guard, black Termination 15 .187” quick connect 17 Solder lug 02 Thru-hole Actuator Marking A Right angle (NONE) No marking D ON-OFF H ”O l” - international ON-OFF N Large dot P ”O -” international ON-OFF Contact Rating QF Silver Lamp Rating (NONE) No lamp 6 LED 7 125 VAC neon 8 250 VAC neon Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–57 DA Series Miniature Single Pole Rocker Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS NO. C&K marking on opposite side C&K marking on opposite side SCHEMATIC POLES MODEL NO. NONE DA101 ON ON OR SP 2-3 2-1 ON NONE N/A OR DA102 OFF For 7 & 8 ForIlluminated Illuminated Versions Version Only + – ON OFF DA103 ON For 6 Illuminated Versions Only Shown in Pos. 1 ACTUATOR J1 ROCKER J2 TWO-TONE ROCKER *J3 ILLUMINATED ROCKER   .142 .389 (3,6) (9,88) NOTE: NOTE: J3 actuator available with DA102 switch functions, 7&8 lamp ratings and not available with O2 and A termination options. 1. Available with DA102 switch function only. 2. Available with None or P actuator marking options only. * J3 actuator not available with markings or Termination option “17” solder lug Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–58 Rocker Rocker DA Series Miniature Single Pole Rocker Switches ACTUATOR J4 CIRCLE, ILLUMINATED ROCKER J5 OVAL, ILLUMINATED ROCKER .389 .389 .142 .142 (9,88) (3,6) (9,88) (3,6) NOTE: Available with DA102 switch function and NOTE: Available with DA102 switch function and 6 lamp rating combinations only. Not available with O2 and A termination options. 7 & 8 lamp ratings combinations only. Not available with O2 and A termination options. * J5 actuator not available with Termination option “17” solder lug * J4 actuator not available with Termination option “17” solder lug ACTUATOR COLOR OPTION ACTUATOR OPTION ACTUATOR CODE COLOR CODE COLOR TOP BOTTOM   2 BLACK 1 WHITE RED J1only 1 WHITE J2 2 WHITE BLACK 3 RED only .142 .389 3 RED WHITE (3,6) (9,88) R RED, ILLUMINATED J3, J4, 4 BLACK WHTE A AMBER, ILLUMINATED J5 only 5 BLACK RED G GREEN, ILLUMINATED MOUNTING STYLE/COLOR G2 GUARD, BLACK S2 SNAP-IN, BLACK S1 SNAP-IN, WHITE S2, S1 & G2 PANEL MOUNTING .940 .700 .350 (23,88) (17,78) (8,89) 1.064 (27,03) PANEL THICKNESS “X” “Y” 0.030-0.049 (0,75-1,25) 0.756-.004 (19,2-0,1) 0.512+.004 (13,0+0,1) 0.049-0.079 (1,25-2,0) 0.764-.004 (19,4-0,1) 0.512+.004 (13,0+0,1) 0.079-0.118 (2,0-3,0) 0.779-.004 (19,8-0,1) 0.512+.004 (13,0+0,1) NOTE: Available with DA10X switch functions only. Actuator shown in Pos. 1 B2 PANEL MOUNTING B2 RECESSED SNAP-IN BRACKET, BLACK .080 1.200 .820 (2,03) (30,48) (20,83) 1.244 (31,60) PANEL THICKNESS “Y” 0.030-0.049 (0,75-0,25) 1.068 (27,13) 0.049-0.079 (1,25-2,0) 1.076 (27,33) 0.079-0.118 (2,0-3,0) 1.092 (27,74) NOTE: Available with DA10X switch functions only. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–59 DA Series Miniature Single Pole Rocker Switches TERMINATION 15 .187” QUICK CONNECT 17 SOLDER LUG 0.870±.020 0.079 (22,10±0,5) (2,0) 0.071 (1,8) 0.039 0.161 (1,00) (4,1) For switches with LED option A* RIGHT ANGLE 02* THRU-HOLE * NOTE - O2 and A termination options not offered with J3, J4 or J5 actuator options. ACTUATOR MARKING N LARGE DOT P O - NONE NO MARKING D ON-OFF H O l All models shown in Pos. 1 NOTE: Orientation of actuator marking and terminals. Markings not available with J3 actuator CONTACT MATERIAL OPTION CONTACT AND CODE TERMINAL MATERIAL RATINGS 16 AMPS @ 125 VAC; 1/3 HP; 10 AMPS @ 250 VAC; 1/2 SILVER POWER QF 10 AMPS @ 125 VAC, 6 AMPS @ 250 VAC * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. ACCESSORIES LAMP RATING (NONE) NO LAMP 216C00000 IP65 SPLASH PROOF RUBBER BOOT 6 LED RATING @ 10 mA V =1.85V f 7 125 VAC 33kΩ NEON .748 .551 8 250 VAC 150kΩ NEON (19,0) (14,0) .787 .142 (20,0) (3,6) .957 .295 (24,3) (7,5) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–60 Rocker