E Series Sealed Miniature Rocker and Lever Handle Switches Features/Benefits Typical Applications • Sealed against solder and cleaning • Telecommunications process contaminants • Instrumentation • ESD Resistance—all actuator options • Computers & peripherals • Rocker, case & bushing UL 94V-0 • RoHS compliant Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat DC max. Q contact material (E1XX & E2XX Models): 7.5 AMPS stabilized (UL 94V-0). @125 V AC or 28 V DC; 3 AMPS @ 250 V AC. (E3XX Models): ACTUATOR: Nylon, black standard, internal o-ring seal standard 5 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC. with all actuators. See page G-36 for additional ratings. FRAME: Spring steel, black standard. ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break SWITCH SUPPORT: Brass or steel, matte-tin plated. cycles at full load. E3XX models: 30,000 cycles. ACTUATOR PIVOT & MOUNTING BRACKET: Nylon. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ ACTUATOR PIVOT RETAINER: Stainless steel. 2-4 V DC, 100 mA, for both silver and gold plated contacts. CONTACTS & TERMINALS: B contact material: Copper alloy, with gold 9 INSULATION RESISTANCE: 10 Ω min. plate over nickel plate. Q contact material: Copper alloy, silver ELECTROSTATIC DISCHARGE (ESD) OPTION: All actuator plated. See page G-36 for additional contact materials. options: 15,000 V DC max. @ sea level, actuator to terminals. TERMINAL SEAL: Epoxy. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. HARDWARE: Nut, Screw & Lockwasher: Stainless steel. Standoff: Nylon standard, aluminum available, consult Customer OPERATING TEMPERATURE: –30ºC to 85ºC. Service Center. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Any models supplied with Q, B, G, S, P & R contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-26 through G-38. For additional options not shown in catalog, consult Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function E101 SP On-None-On Contact Material Actuator E103 SP On-Off-On B Gold J1 .531 long rocker Terminations E105 SP Mom.-Off-Mom. P Gold, matte tin J2 Lever A Right angle, PC thru-hole E107 SP On-Off-Mom. Q Silver J3 .906” long rocker AV2 Vertical right angle, PC thru-hole E108 SP On-None-Mom. S Silver, matte-tin J11 Rocker with frame C PC Thru-hole E201 DP On-None-On G Gold over silver J21 Lever with frame Z Solder lug E203 DP On-Off-On R Gold over silver, matte-tin J50 .362” long rocker A3 Right angle, snap-in, PC thru-hole E205 DP Mom.-Off-Mom. J60 Lever AV3 Vertical right angle, snap-in, PC thru-hole E207 DP On-Off-Mom. J90 Lever Seal E208 DP On-None-Mom. V3 .460” high, V-bracket E Epoxy V4 .630” high, V-bracket E211 DP On-On-On V5 Vertical right angle, PC thru-hole E213 DP On-On-Mom. V6 .460” high, V-bracket E215 DP Mom.-On-Mom. Actuator Color V7 .630” high, V-bracket E301 3P On-None-On 2 Black Frame Color V8 .953” high, V-bracket 3 Red 2 Black V21 .555” high, V-bracket, snap-in NONE No frame color required V31 .460” high, V-bracket, snap-in Metal Frame Color (J11, J21 Actuators) 2 Black Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–26 Rocker Rocker E Series Sealed Miniature Rocker and Lever Handle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 NO. MODEL C&K marking on opposite side C&K marking on opposite side POLES NO. SCHEMATIC E101 ON NONE ON N/A E103 ON OFF ON SP E105 MOM. OFF MOM. 2-3 OPEN 2-1 E107 ON OFF MOM. E108 ON NONE MOM. SPDT N/A SPDT Terminal Nos. For Reference Only Part number shown: E101J1ZBE2 E201 ON NONE ON N/A E203 ON OFF ON E205 MOM. OFF MOM. OPEN E207 ON OFF MOM. DP 2-3,5-6 2-1,5-4 E208 ON NONE MOM. N/A E211** ON ON ON E213** ON ON MOM. 2-3,5-4 DPDT E215** MOM. ON MOM. DPDT Terminal Nos. For Reference Only Part number shown: E201J1ZBE2 MOM. = Momentary ** Wiring for 3-way switch, Hardware available seperately, see Technical Data section of this catalog. All models with all options when ordered with G, Q, R or S contact material. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–27 E Series Sealed Miniature Rocker and Lever Handle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 NO. MODEL C&K marking on opposite side C&K marking on opposite side POLES NO. SCHEMATIC 3P E301 ON NONE ON 2-3,5-6,8-9 N/A 2-1,5-4,8-7 3PDT 3PDT Terminal Nos. For Reference Only Part number shown: E301J1ZBE2 MOM. = Momentary All models with all options when ordered with G, Q, R and S contact material. ** Wiring for 3-way switch, see Technical Data section of this catalog. ACTUATOR COLOR ACTUATOR–PANEL REAR MOUNT ACTUATOR OPTION ACTUATOR CODE COLOR J1  LEVER 2 BLACK 3 RED Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Hardware: two each—mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on switches with panel mounting bracket. Internal o-ring actuator seal standard. Actuators available separately, see page G-36. Hardware available seperately, see Technical Data section of this catalog. J1, J2 actua- tors available with C, Z or Z3 terminations. J2  LEVER PANEL MOUNTING J1 & J2 Actuators J8 Actuator Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–28 Rocker Rocker E Series Sealed Miniature Rocker and Lever Handle Switches ACTUATOR COLOR ACTUATOR–REAR MOUNT ACTUATOR FRAME COLOR J11  ROCKER WITH FRAME OPTION ACTUATOR CODE COLOR 2 BLACK 3 RED OPTION CODE FRAME COLOR 2 BLACK NOTE: This option has reduced anti-static capability. Actuator finish: Matte, frame finish: gloss. J21  LEVER WITH FRAME Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Internal o-ring actuator seal standard. Actuators & frames available separately, see page G-36. Hardware available seperately, see Technical Data section of this catalog. N. J11 & J21 actuators available with C, Z & Z3 terminations. PANEL MOUNTING NOTE: This option has reduced anti-static capability. ACTUATOR COLOR ACTUATOR–PC MOUNT ACTUATOR J1  ROCKER OPTION ACTUATOR CODE COLOR 2 BLACK 3 RED Finish: Matte. Other colors, custom actuator markings and legends available, consult J2  LEVER Customer Service Center. NOTE: Hardware: two each—mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on switches with panel mounting bracket. Internal o-ring actuator seal standard. Actuators available separately, see page G-36. Hardware available seperately, see Technical Data sec- tion of this catalog. J1, J2 actuators available with A, A3, AV2, AV3, V2-V61 terminations. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–29 E Series Sealed Miniature Rocker and Lever Handle Switches ACTUATOR COLOR ACTUATOR–PC MOUNT ACTUATOR J3  ROCKER OPTION ACTUATOR CODE COLOR 2 BLACK 3 RED J50  ROCKER Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Hardware: two each—mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on switches with panel mounting bracket. Internal o-ring actuator seal standard. Actuators available separately, see page G-36. Hardware available seperately, see Technical Data section of this J60  LEVER catalog. J3 actuators available with AV2, AV3 & V2-V61 terminations. Some permissible actua- tor/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. J50, J60 & J90 actuators available with A, AV2, AV3, V2 – V61 terminations. J90  LEVER TERMINATIONS Z  SOLDER LUG C  PC THRU-HOLE PC MOUNTING Not available with P, S, & R contact materials. SPDT thru 3PDT SPDT thru 3PDT Available actuators, see page G-27-28. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–30 Rocker Rocker E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS Z3  QUICK CONNECT Not available with P, S, & R contact materials. Available actuators, see pages G-27 thru G-28. Mating quick connector SPDT thru 3PDT available; order part number 530100000, page G-37. A  RIGHT ANGLE, PC THRU-HOLE E101J1ABE2 Horizontal Actuation Actuator Shown In Pos. 1 SECTION A-A SPDT PC MOUNTING A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE NOTE: Not available with J3, J50, J60 and J90 actuators. NOTE: PC mounting pattern must clear Available actuators, see pages G-27 thru G-29. Terminal bend radii and lead-in manufacturing option. switch support leg. A  RIGHT ANGLE, PC THRU-HOLE E201J1ABE2 Actuator Shown In Pos. 1 Horizontal Actuation SECTION A-A DPDT PC MOUNTING A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE NOTE: Not available with J3 actuator. Available actuators, see pages G-27 thru G-29. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–31 E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS A  RIGHT ANGLE, PC THRU-HOLE E301J1ABE2 Horizontal Actuation 3PDT Actuator Shown In Pos. 1 SECTION A-A PC MOUNTING NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages G-27 thru G-29. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH E101J1AV2BE2 Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A SPDT AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages G-27 thru G-29. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–32 Rocker Rocker E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH E201J1AV2BE2 Vertical Actuation SECTION A-A DPDT Actuator Shown In Pos. 1 AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, PC MOUNTING .150” PITCH NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages G-27 thru G-29. AV2   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH E301J1AV2BE2 Vertical Actuation SECTION A-A 3PDT Actuator Shown In Pos. 1 AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages G-27 thru G-29. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–33 E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS V5  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH PC MOUNTING E101J1V5BE2 Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A SPDT NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages G-27 thru G-29. V5  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH PC MOUNTING E201J1V5BE2 Vertical Actuation SECTION A-A DPDT Actuator Shown In Pos. 1 NOTE: Terminal bend radii and lead-in manufacturing option. Available actuators, see pages G-27 thru G-29. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–34 Rocker Rocker E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS V6, V7, V8  VERTICAL MOUNT, V-BRACKET PC MOUNTING V21  VERTICAL MOUNT, V-BRACKET, SNAP-IN OPTION CODE DIM ‘A’ E101J1__BE2 V21 .555 (14, 10) SPDT V6 .460 (11, 68) V7 .630 (16, 00) V8 .953 (24, 21) NOTE: Available actuators, see pages G-27 thru G-29. V6, V7, V8  VERTICAL MOUNT, V-BRACKET PC MOUNTING V21  VERTICAL MOUNT, V-BRACKET, SNAP-IN OPTION CODE DIM ‘A’ V21 .555 (14, 10) E201J1__BE2 V6 .460 (11, 68) DPDT V7 .630 (16, 00) V8 .953 (24, 21) NOTE: Available actuators, see pages G-27 thru G-29. V7, V8  VERTICAL MOUNT, V-BRACKET PC MOUNTING V21  VERTICAL MOUNT, V-BRACKET, SNAP-IN OPTION CODE DIM ‘A’ E301J1__BE2 V21 .555 (14, 10) 3PDT V7 .630 (16, 00) V8 .953 (24, 21) NOTE: Available actuators, see pages G-27 thru G-29. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–35 E Series Sealed Miniature Rocker and Lever Handle Switches TERMINATIONS V3, V4  VERTICAL MOUNT, V-BRACKET V31  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING E101J1__BE2 SPDT OPTION CODE DIM ‘A’ V3, V31 .460 (11,68) V4 .630 (16,00) NOTE: Available actuators, see pages G-27 thru G-29. V3, V4  VERTICAL MOUNT, V-BRACKET V31  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING E201J1__BE2 DPDT OPTION CODE DIM ‘A’ V3, V31 .460 (11,68) V4 .630 (16,00) NOTE: Available actuators, see pages G-27 thru G-29. V4  VERTICAL MOUNT, V-BRACKET VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING E301J1__BE2 3PDT OPTION CODE DIM ‘A’ V41 .630 (16,00) NOTE: Available actuators, see pages G-27 thru G-29. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–36 Rocker Rocker E Series Sealed Miniature Rocker and Lever Handle Switches CONTACT MATERIAL OPTION CONTACT TERMINAL CODE MATERIAL PLATING RATINGS 1 GOLD LOW LEVEL/ B 1 GOLD 0.4 VA MAX. @ 20 V AC OR DC MAX. 7 DRY CIRCUIT MATTE-TIN P 4,5 5 SILVER Q SILVER E1XX & E2XX MODELS: 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @250 V AC. POWER 6 E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. S MATTE-TIN E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR 3 GOLD G GOLD OVER LOW LEVEL/DRY 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC. 2,3 6 SILVER MATTE-TIN CIRCUIT OR POWER DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @ R 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. NOTE: Any models supplied with Q, B, G, S P & R contact material are RoHS compliant. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. All models with all options when ordered with G, Q, S & R contact material. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate B contact material standard with all terminations. over nickel plate. 4 END CONTACTS: Coin silver, silver plated. P R & S contact materials not available with Z terminations. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver plate. Or copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. SEAL E  EPOXY SEAL AVAILABLE HARDWARE J2, J21 Actuators J3 Actuator J1, J11 Actuators PART NO. PART NO. PART NO. 760502263 BLACK 766602263 BLACK 776A02263 BLACK 760503000 RED 766603000 RED 776A03000 RED Material: Nylon Material: Nylon Material: Nylon Finish: Matte Finish: Matte Finish: Matte J90 Actuator J50 Actuator J60 Actuator PART NO. PART NO. PART NO. 598002263 BLACK 775A02263 BLACK 613802263 BLACK 598003000 RED 775A03000 RED 598103000 RED Material: Nylon Material: Nylon Material: Nylon Finish: Matte Finish: Matte Finish: Matte NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog. Other colors available, consult Customer Service Center. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–37 E Series Sealed Miniature Rocker and Lever Handle Switches AVAILABLE HARDWARE Fits Z3 Termination Frame for J11, J21 Actuators J50, J60 & J90 Actuators female connector MATTE GLOSS PART NO. PART NO. PART NO. 764500746 BLACK ENAMEL 486702000 486802000 BLACK 764601106 RETAINING SPRING PART NO. Material: Nylon Material: Spring Steel 530100000 Finish: Matte or Gloss Available in loose pieces. NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog. Other colors available, consult Customer Service Center. Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC TYPICAL APPLICATION mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte. J1 & J2 Actuators .047” (1,19) PANEL THK. .062” (1,57) PANEL THK. .090” (2,29) PANEL THK. .125” (3,18) PANEL THK. PART NO. PART NO. PART NO. PART NO. 452902263 452702263 452802263 452602263 BLACK 452903000 452703000 452803000 452603000 RED J50, J60 & J90 Actuators .047” (1,19) PANEL THK. .062” (1,57) PANEL THK. .090” (2,29) PANEL THK. .125” (3,18) PANEL THK. PART NO. PART NO. PART NO. PART NO. 432502263 432602263 432702263 432802263 BLACK 432503000 432603000 432703000 432803000 RED PANEL MOUNTING For part numbers For part numbers For part numbers 4529xxxxx, 4527xxxxx, 4325xxxxx, 4326xxxxx 4327xxxxx, 4328xxxxx 4528xxxxx, 4526xxxxx .005 R. MAX. .005 R. .005 R. .495 – .505 .495 – .505 .495 – .505 (0,13) TYP. (0,13) (0,13) (12,57 – 12,83) (12,57 – 12,83) (12,57 – 12,83) MAX. TYP. MAX. TYP. .797 – .803 .595 – .605 .620 – .625 (20,24 – 20,40) (15,11 – 15,37) (15,75 – 15,88) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–38 Rocker Rocker E Series Sealed Miniature Rocker and Lever Handle Switches AVAILABLE HARDWARE Panel Inserts Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. Will fit separate snap-in frames for J50, J60, J90 actuators. PANEL INSERT BLANK PANEL INSERT WITH HOLE FOR LED WITHOUT HOLE FOR LED PART NO. PART NO. 894902000 476602000 BLACK 894903000 476603000 RED NOTE: Special colors, custom markings available, consult Customer Service Center. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–39