Toggle 7000 Series Miniature Toggle Switches Features/Benefits Typical Applications • Multi-pole and multi-position • Telecommunications • Wide variety of actuator and • Instrumentation termination options • Medical equipment • Epoxy terminal-seal compatible with bottom wash cleaning • RoHS complaint models available DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. Specifications OPERATING TEMPERATURE: –30ºC to 85ºC. CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC; method 9 (1 hour steam aging). 2 AMPS @ 250 V AC. See page F-15 for additional ratings. ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break For materials see page F-4. cycles at full load. All other models: 40,000 cycles. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, NOTE: Any models supplied with P, S R, Q, B or G contact material are RoHS compliant and compatible. 100 mA, for both silver and gold plated contacts. 9 NOTE: Specifications listed above are for switches with standard options. For information INSULATION RESISTANCE: 10 Ω min. on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F–4 thru F–16. For additional options not shown in catalog, consult our Customer Service Center. Bushing Switch Function D .280 high, keyway 7101 SP On-None-On Actuator Contact Material H .296 high, flat 7103 SP On-Off-On M .200” high B Gold Seal Y .350 high, keyway 7105 SP Mom.-Off-Mom. P3 Flatted, anti-rotation, P Gold, matte-tin E Epoxy NONE No bushing 7107 SP On-Off-Mom. .450” high Q Silver I Epoxy potted choice required 7108 SP On-None-Mom. S .420” high S Silver, matte-tin base CW Splashproof 7109 SP None-On-Mom. T .687” high, 15/32 bushing G Gold over silver D8 .280” high, flat 7201 DP On-None-On K2 Locking lever, .704” high R Gold over silver, matte-tin D9 .280” high, keyway 7203 DP On-Off-On K9 Locking lever, .704” high H3 .315” high, keyway 7205 DP Mom.-Off-Mom. K12 Locking lever, .732” high H4 8mm high, keyway 7207 DP On-Off-Mom. K19 Locking lever, .732” high Y1 .378” high, keyway Actuator Color/Finish 7208 DP On-None-Mom. L .840” high Y3 8.9mm high, keyway NONE Bright chrome 7211 DP On-On-On L1 .640” high Y4 .378” high, flat 2 Black 7213 DP On-On-Mom. L1P Anti-rotation, .640” high Y9 .350” high, keyway 3 Red 7215 DP Mom.-On-Mom. L2 .550” high S Satin chrome 7301 3P On-None-On L2P Anti-rotation, .550” high Terminations 7303 3P On-Off-On L3 Plastic .940” inch A Right angle, PC thru-hole KXX Actuator Color/Finish 7305 3P Mom.-Off-Mom. L40 Lever handle without cap AV2 Vert. right angle, PC thru-hole NONE Natural aluminum 7308 3P On-None-Mom. L41 .531” high lever handle with cap C PC Thru-hole 2 Black anodized aluminum 7401 4P On-None-On L42 .838” high lever handle with cap V3 .460 high, V-bracket 3 Red anodized aluminum 7403 4P On-Off-On MP Anti-rotation, .200” high Z Solder lug 7 Blue anodized aluminum 7405 4P Mom.-Off-Mom. P1 Flatted, anti-rotation, A2 Right angle, PC thru-hole 7408 4P On-None-Mom. .840” high A3 Right angle, PC thru-hole 7411 4P On-On-On P4 Flatted, anti-rotation, A4 Right angle, PC thru-hole Bushing Finish 7413 4P On-On-Mom. .250” high AW1 Right angle, extended, PC thru-hole NONE  Nickel on all 7415 4P Mom.-On-Mom. SP Anti-rotation, .420” high AW4 Right angle, extended, PC thru-hole bushings (except D8, Note: UL models available, T1 .487” high, 15/32 bushing V2 .555” high, V-bracket see pages F-4 & F-5. satin chrome) T1P Anti-rotation, .487” high, V4 .630” high, V-bracket 2 Black 15/32 bushing V6 .460” high, V-bracket T2P Flatted, anti-rotation, V7 .630” high, V-bracket .610” high, 15/32 bushing, V8 .953” high, V-bracket TP Anti-rotation, .687” high, W .750” long, wire wrap V9 1.150” high, V-bracket F 15/32 bushing V21 .555” high, snap-in V-bracket W1 .964” long, wire wrap V31 .460” high, snap-in V-bracket W3 .425” long, wire wrap V41 .630” high, snap-in V-bracket W4 1.062” long, wire wrap V71 .630” high, snap-in V-bracket W5 1.305” long, wire wrap V81 .953” high, snap-in V-bracket Z3 Quick connect Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–3 7000 Series Miniature Toggle Switches Materials CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or CENTER CONTACTS & ALL TERMINALS: B contact material: Copper diallyl phthalate (DAP) (UL 94V-0). alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See above for additional contact materials. ACTUATOR: Brass, chrome plated. TERMINAL SEAL: Epoxy. BUSHING: Brass or zinc, nickel plated. HARDWARE: Nut & Locking Ring: Brass, nickel plated. HOUSING: Stainless steel. Lockwasher: Steel, nickel plated. SWITCH SUPPORT: Brass or steel, tin plated. NOTE: Materials listed above are for switches with standard options. For information END CONTACTS: B contact material: Copper alloy, with gold plate on specific and custom switches, consult Customer Service Center. over nickel plate. Q contact material: Coin silver, silver plated. See page F-15 for additional contact materials. SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 UL** NO. MODEL POLES MODEL NO. NO. SCHEMATIC 7101 U11 ON NONEON 2-3 N/A 2-1 7103 U13 ON OFF ON 7105 U15 MOM.OFF MOM. 2-3 OPEN 2-1 SP 7107 U17 ON OFF MOM. 7108 U18 ON NONEMOM. 2-3 N/A 2-1 7109 U19 NONE ON MOM. N/A 2-3 2-1 SPDT SPDT 1/4-40 UNS-2A KEYWAY Terminal Numbers For Reference Only Part number shown: 7101SYZBE 7201 U21 ON NONEON 2-3,5-6 N/A 2-1,5-4 7203 U23 ON OFF ON 7205 U25 MOM.OFF MOM. 2-3,5-6 OPEN 2-1,5-4 7207 U27 ON OFF MOM. DP 7208 U28 ON NONEMOM. 2-3,5-6 N/A 2-1,5-4 7211 * U211* ON ON ON 7213* U213* ON ON MOM. 2-3,5-6 2-3,5-4 2-1,5-4 DPDT 7215* U215* MOM.ONMOM. DPDT 1/4-40 UNS-2A KEYWAY Terminal Numbers F For Reference Only Part number shown: 7201SYZQE MOM. = Momentary ** U11–U415 model nos. with all options when ordered with G, R, Q or S contact material. * Wiring for 3-way switch, see Section N. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–4 Toggle Toggle 7000 Series Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 UL** NO. MODEL POLES MODEL NO. NO. SCHEMATIC 7301 U31 ON NONEON 2-3,5-6,8-9 N/A 2-1,5-4,8-7 7303 U33 ON OFF ON 3P 7305 U35 MOM. OFF MOM. 2-3,5-6,8-9 OPEN 2-1,5-4,8-7 7307 U37 ON OFF MOM. 3PDT 7308 U38 ON NONEMOM. 2-3,5-6,8-9 N/A 2-1,5-4,8-7 3PDT 1/4-40 UNS-2A KEYWAY Terminal Numbers Part number shown: 7301SYZQE For Reference Only 7401 U41 ON NONEON 2-3,5-6,8-9,11-12 N/A 2-1,5-4,8-7,11-10 7403 U43 ON OFF ON 7405 U45 MOM. OFF MOM. 2-3,5-6,8-9,11-12 OPEN 2-1,5-4,8-7,11-10 7408 U48 ON NONEMOM. 2-3,5-6,8-9,11-12 N/A 2-1,5-4,8-7,11-10 4P 7411* U411* ON ON ON 7413* U413* ON ON MOM. 2-3,5-6,8-9,11-12 2-3,5-4,8-9,11-10 2-1,5-4,8-7,11-10 4PDT 7415* U415* MOM. ON MOM. 4PDT 1/4-40 UNS-2A KEYWAY Terminal Numbers Part number shown: 7401SYZQE For Reference Only MOM. = Momentary ** U11–U415 model nos. with all options when ordered with G, Q, R or S contact material. * Wiring for 3-way switch, see Section N. F Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–5 7000 Series Miniature Toggle Switches ACTUATOR FINISH ACTUATOR ACTUATOR 1 1 1 S  .4206” HIGH M  .2006” HIGH L, L1, L2  .8406”, .6406”, .5506” HIGH 2,3 2,3 SP  ANTIROTATION, .4206” HIGH MP  ANTIROTATION, .2006” HIGH L1P, L2P  ANTIROTATION, 2,3 .8406”, .6406”, .5506” HIGH OPTION * CODE DIM ‘A’ *DIM. ‘A’ * L .840 (21,34) L1, L1P .640 (16,26) L2, L2P .550 (13,97) S actuator standard when ordered with M actuator standard when ordered with C, W-W5, Z & Z3 terminations. all terminations except C, W-W5, Z & Z3. Caps are available separately, see page F-16. Caps are available separately, see page F-16. Caps are available separately, see page F-16. 2,3 *P1  FLATTED WITH ANTIROTATION, .8406” HIGH *P3  FLATTED WITH ANTIROTATION, *P4  FLATTED WITH ANTIROTATION, .2506” HIGH 2,3 2,3 .4506” HIGH * * * *Dress nut part number 709901201 supplied standard with threaded bushing. (Part number 709903201 with metric threaded bushings.) 1,2 1,2 T  .687 (17,45)6 HIGH T1  .487 (12,37)6 HIGH T2P  FLATTED, ANTIROTATION, .6106” HIGH, 1,2,3 15/32 BUSHING TP  ANTIROTATION, .687 (17,45) HIGH, T1P  ANTIROTATION, .487 (12,37) HIGH, 1,2,3 1,2,3 15/32 BUSHING 15/32 BUSHING 15/32-32 UNS-2A .687 .487 15/32-32 UNS-2A 15/32-32 UNS-2A (17,45) (12,37) .448 (11,38) Bushing option code not required unless CW splashproof bushing ordered. TP & T1P Bushing option code not required. T2P actuator not available actuators not available with CW splashproof bushing. All TXX actuators not available on with CW splashproof bushing or single pole models with single pole models with A-A4, AW1-AW4 terminations. A-A4, AW1-AW4 terminations. 1 L, L1, L2, M, S & TXX actuators not available NOTE: Black hardware is supplied when either OPTION with Y1 bushing. black actuators or bushings are specified. For CODE ACTUATOR FINISH additional hardware, see Section N. 2 L1P, L2P, MP, P1, P3, P4, SP & TXX actuators F not NONE BRIGHT CHROME-With Nickel Plated Bushing available with D8 & H4 bushing. 2 BLACK 3 Antirotation: Provides anti-‘push-in’ feature on actuator. S SATIN CHROME * Add .070 (1,78) for D, D8 & D9 bushings, subtract .020 (0,51) for H3 bushing. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–6 Toggle Toggle 7000 Series Miniature Toggle Switches ACTUATOR FINISH/COLOR ACTUATOR ACTUATOR K2  LOCKING LEVER, .704” HIGH K12  LOCKING LEVER, .732” HIGH (threaded) (threaded) K9  LOCKING LEVER, .704” HIGH K19  LOCKING LEVER, .732” HIGH (unthreaded) (unthreaded) OPTION CODE ACTUATOR CAP FINISH NONE NATURAL ALUMINUM–With Nickle Plated Bushing 2 BLACK ANODIZED ALUMINUM * * 3 RED ANODIZED ALUMINUM 7 BLUE ANODIZED ALUMINUM * All KXX models including KXXCW have a keyway Replaces K, K8 Replaces K1, K18 Locking Positions NOTE: To prevent accidental actuation, toggle must be lifted before being actuated. When released, toggle will lock in place. Overtightening mounting nut may cause actuator to bind. Locking levers supplied with bushing shown. Bushing option code not required unless CW splashproof –01 Models –03 & –11 Models –05, –09 & –15 Models –07 & –13 Models –08 Models bushing ordered. 2 Position lock 3 Position lock 1 Position lock 2 Position lock 1 Position lock L40  LEVER HANDLE WITHOUT CAP L41  PLASTIC LEVER HANDLE WITH L42  PLASTIC LEVER HANDLE WITH ANTIROTATION AND CAP, P/N 4810 ANTIROTATION AND CAP, P/N 4811 No color choice required. Finish: Matte (L41 & L42). L3  PLASTIC .940” HIGH Gloss Plastic OPTION PLASTIC ACTUATOR CODE COLORS * NONE No Actuator Color (L40 option) 2 BLACK Chrome Finish 3 RED F * Add .070 (1,78) for D, D8 & D9 bushings, NOTE: Lever handle for L41 & L42 actuators supplied, but not installed. For interchangeability, subtract .020 (0,51) for H3 bushing. order L40 actuator option and lever handles separately, see page F-16. L4X actuators not available with H4, Y1, Y4 bushings. Antirotation: Provides anti-‘push-in’ feature on actuator. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–7 7000 Series Miniature Toggle Switches BUSHING FINISH BUSHING BUSHING Y  .350” HIGH, NONE  NO BUSHING D  .280” HIGH, H  .296” HIGH, FLAT H3  .315” HIGH, KEYWAY 1,2 THREADED, KEYWAY THREADED, KEYWAY THREADED, HIGH TORQUE THREADED, HIGH 1,2 TORQUE Y9  .350” HIGH, D8  .280” HIGH, UNTHREADED, 3 UNTHREADED, FLAT KEYWAY D9  .280” HIGH, UNTHREADED, KEYWAY No bushing choice required with KXX, TXX actuators. (exception: Specify CW if splashproof bushing desired). D8 D, D9 1/4-40 UNS-2A 1/4-40 UNS-2A 1/4-40 UNS-2A 1/4-40 UNS-2A D9 bushing standard with all terminations Y bushing standard with C, except C, W-W5, Z or Z3. Add .070 (1,78) to Subtract .020 (0,51) from all actuator W-W5, Z or Z3 terminations. all actuators lengths with D, D8 & D9 bushings. lengths for H3 bushing. H4   8mm HIGH, KEYWAY, THREADED, Y1   .378” HIGH, KEYWAY, THREADED, Y3   8.9mm HIGH, KEYWAY, Y4   .378” HIGH, FLAT, THREADED, 1,2,3 1,2,4 1,2,5 METRIC HIGH TORQUE HIGH TORQUE THREADED, METRIC HIGH TORQUE 1/4-40 UNS-2A 1/4-40 UNS-2A 1,2 CW  THREADED, SPLASHPROOF For T & T1 actuators. For actuators other than T and T1. OPTION CODE BUSHING FINISH NICKEL on all bushings NONE except ‘D8’ satin chrome. 2 BLACK 15/32-32 UNS-2A 1 Will withstand 12 in.-lbs. of torque with no distortion. 1/4-40 UNS-2A 2 CW. H, H3, H4, Y1 & Y4 bushings not available on single pole models with A4 terminations. 3 D8 & H4 bushings available only with L, L1, L2, M & S actuators. 4 Y1 bushing available only with LXP, MP, PX & SP actuators. 5 IP67 Degree of protection, totally protected against IP67 Degree of protection, totally protected Y4 bushing not available with L4X actuators. dust, full-scale voltage protection, temporary immersion. against dust, full-scale voltage protection, NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with Internal actuator seal standard. temporary immersion. Internal actuator seal threaded bushings. Black hardware is supplied when either black bushings or External bushing seal available separately from and external bushing seal washer standard. actuators are specified. Optional mounting nut and locking ring styles and finishes APM Hexseal, part # MFS-60064. IP65 degree of protection for LXP, MP, PX available, see Section N. or SP with CW option. PANEL MOUNTING 1/4 INCH BUSHING METRIC BUSHING 15/32 INCH BUSHING F Without locking ring. With standard locking ring. With small locking ring. Without locking ring.With locking ring. Without locking ring. With standard locking ring. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–8 Toggle Toggle 7000 Series Miniature Toggle Switches TERMINATIONS Z  SOLDER LUG C  PC THRU-HOLE PC MOUNTING .030 (0,76) Thk. Not available with P, R or S contact materials. SPDT thru 4PDT SPDT thru 4PDT Z3  QUICK CONNECT W, W1, W3, W4, W5  WIRE WRAP OPTION CODE DIM ‘A’ Dim 'A' W .750 (19,05) W1 .964 (24,48) W3 .425 (10,80) W4 1.062 (26,97) .030 (0,76) Thk. W5 1.305 (33,15) .030 (0,76) Thk. Not available with P, R or S contact materials. Mating quick connector available, order part SPDT thru 4PDT SPDT thru 4PDT number 530100000, page F-16. A  RIGHT ANGLE, PC THRU-HOLE Actuator Shown 7101MD9ABE In Pos. 1 SECTION A-A Horizontal Actuation Terminal Nos. SPDT For Reference Only Switch support with CW, H, H3, H4, Y1, Y4 bushings and KXX actuators. Part No. Shown: 7101MHABE A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE AW1, AW4  RIGHT ANGLE, EXTENDED, PC MOUNTING PC THRU-HOLE OPTION CODE DIM ‘A’ AW1 .72 (18,3) Dim 'A' AW4 .83 (21,1) F Not available with I seal option. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–9 7000 Series Miniature Toggle Switches TERMINATIONS A  RIGHT ANGLE, PC THRU-HOLE 7201MD9ABE Actuator Shown Terminals & In Pos. 1 SECTION A-A Support Horizontal Actuation DPDT A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE AW1, AW4  RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING OPTION CODE DIM ‘A’ AW1 .40 (10,2) DIM 'A' AW4 .50 (12,7) .33 (8,4) Not available with I seal option. Terminal bend radii and lead-in manufacturing option. A  RIGHT ANGLE, PC THRU-HOLE 7301MD9ABE Terminals & Actuator Shown Horizontal Actuation SECTION A-A In Pos. 1 Support 3PDT AW4  RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING .18 (4,6) F .33 TYP. (8,4) Not available with I seal option. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–10 Toggle Toggle 7000 Series Miniature Toggle Switches TERMINATIONS A2  RIGHT ANGLE, PC THRU-HOLE, PC MOUNTING .156” PITCH 7101MHA2BE Terminals & Support Horizontal Actuation Actuator Shown In Pos. 1 SPDT Switch support with CW, H, H3, H4, Y1, Y4 bushings and KXX actuators. Not available with TXX actuators and I seal. Part No. Shown: 7101MHA2BE Terminal bend radii and lead-in manufacturing option. A4  RIGHT ANGLE, PC THRU-HOLE .156” PITCH PC MOUNTING 7101MD9A4BE Horizontal Actuation SPDT Actuator Shown In Pos. 1 Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings, NOTE: The A4 option is available with any contact material and can be UL recognized and and I seal. Terminal bend radii and lead-in manufacturing option. CSA certified. The PC pattern must clear switch support legs. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, PC MOUNTING .150” PITCH 7101MD9AV2BE Horizontal Actuation Actuator Shown In Pos. 1 SPDT SECTION A-A Not available with I seal option. Terminal bend radii and lead-in manufacturing option. PC MOUNTING AV2   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7201MD9AV2BE Vertical Actuation DPDT F SECTION A-A Actuator Shown In Pos. 1 Not available with I seal option. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–11 7000 Series Miniature Toggle Switches TERMINATIONS AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH PC MOUNTING 7301MD9AV2BE Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A 3PDT Not available with I seal option. Terminal bend radii and lead-in manufacturing option. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH PC MOUNTING 7401MD9AV2BE Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A 4PDT Not available with I seal option. Terminal bend radii and lead-in manufacturing option. V2, V6, V7, V8  VERTICAL MOUNT, V-BRACKET V21, V71, V81  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ Snap-In 7101MD9__BE OPTION SPDT CODE DIM ‘A’ Actuator Shown In Pos. 1 V2, V21 .555 (14,10) V6 .460 (11,68) Not available with I seal option. V7, V71 .630 (16,00) V8, V81 .953 (24,21) F Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–12 Toggle Toggle 7000 Series Miniature Toggle Switches TERMINATIONS V2, V6, V7, V8  VERTICAL MOUNT, V-BRACKET PC MOUNTING V21, V61, V71, V81  VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim ‘A’ OPTION CODE DIM ‘A’ 7201MD9__BE Snap-In DPDT V2, V21 .555 (14,10) V6, V61 .460 (11,68) V7, V71 .630 (16,00) Actuator Shown In Pos. 1 V8, V81 .953 (24,21) Not available with I seal option. V2, V7, V8  VERTICAL MOUNT, V-BRACKET PC MOUNTING V21, V71, V81  VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim ‘A’ 7301MD9__BE 3PDT OPTION CODE DIM ‘A’ Snap-In V2, V21 .555 (14,10) V7, V71 .630 (16,00) V8, V81 .953 (24,21) Actuator Shown In Pos. 1 Not available with I seal option. PC MOUNTING V2, V7, V8  VERTICAL MOUNT, V-BRACKET V21, V71, V81  VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim ‘A’ OPTION 7401MD9__BE CODE DIM ‘A’ 4PDT Snap-In V2, V21 .555 (14,10) F V7, V71 .630 (16,00) V8, V81 .953 (24,21) Actuator Shown In Pos. 1 Not available with I seal option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–13 7000 Series Miniature Toggle Switches TERMINATIONS V3, V4, V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING V31, V41  VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim ‘A’ OPTION CODE DIM ‘A’ Snap-In V3, V31 .460 (11,68) V4, V41 .630 (16,00) 7101MD9__BE V9 1.150 (29,21) SPDT Actuator Shown In Pos. 1 Not available with I seal option. V3, V4, V9  VERTICAL MOUNT, V-BRACKET V31, V41  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ 7201MD9__BE DPDT OPTION Snap-In CODE DIM ‘A’ V3, V31 .460 (11,68) V4, V41 .630 (16,00) Actuator Shown In Pos. 1 V9 1.150 (29,21) Not available with I seal option. V4, V9  VERTICAL MOUNT, V-BRACKET V41  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING Dim ‘A’ 7301MD9__BE 3PDT OPTION CODE DIM ‘A’ Snap-In F V4, V41 .630 (16,00) Actuator Shown In Pos. 1 V9 1.150 (29,21) Not available with I seal option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–14 Toggle Toggle 7000 Series Miniature Toggle Switches TERMINATIONS V4, V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING V41  VERTICAL MOUNT, V-BRACKET, SNAP-IN Dim 'A' 7401MD9__BE 4PDT Snap-In OPTION CODE DIM ‘A’ Actuator Shown In Pos. 1 V4, V41 .630 (16,00) Not available with I seal option. V9 1.150 (29,21) CONTACT MATERIAL OPTION CONTACT TERMINAL CODE MATERIAL PLATING RATINGS B 1 GOLD 1 LOW LEVEL/ GOLD 0.4 VA MAX. @ 20 V AC OR DC MAX. 6 MATTE-TIN DRY CIRCUIT P Q 5 SILVER 4,5 SILVER POWER 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. 6 MATTE-TIN S 3 G GOLD GOLD OVER LOW LEVEL/DRY 0.4 VA MAX @ 20 V AC OR DC MAX. OR 5 AMPS @ 120 V AC 6 2,3 MATTE-TIN OR 28 V DC; 2 AMPS @ 250 V AC. SILVER CIRCUIT OR POWER R * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant. CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. U11-U415 model numbers with all options when ordered with G, 3 S, R, or Q contact material. CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. B contact material standard with all terminations except C, Z & Z3. 4 END CONTACTS: Coin silver, silver plated. Q contact material standard with C, Z & Z3 terminations. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. P, S & R contact materials not available with Z & Z3 terminations. 6 TERMINALS: Copper alloy, with matte tin alloy nickel plate. F Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–15 7000 Series Miniature Toggle Switches SEAL E  EPOXY SEAL I  EPOXY POTTED BASE NO. POLES DIM ‘A’ Dim. 'A' SP .410 (10,41) DP .440 (11,18) 3P .505 (12,83) 4P .505 (12,83) Compatible with “bottom-wash” PC board cleaning methods. Available with C, W-W5, Z & Z3 terminations only. AVAILABLE HARDWARE Cap Cap Cap .312 .383 .687 (7,92) (9,73) (17,45) PART NO. PART NO. PART NO. 896801000 WHITE 763701000 WHITE 706201000 WHITE 896802000 BLACK 763702000 BLACK 706202000 BLACK 896803000 RED 763703000 RED 706203000 RED Material: Polyethylene Material: Vinyl Material: Vinyl Finish: Matte Finish: Matte Finish: Matte Fits Z3 Termination L41 Lever handle L42 Lever handle female connector .477 .777 (12,12) (19,74) NOTE: Additional nuts, locking rings and lockwashers available PART NO. PART NO. PART NO. separately, see Section N. 481001000 WHITE 481101000 WHITE 530100000 481002263 BLACK 481102263 BLACK Available in loose pieces. 481003000 RED 481103000 RED Other colors available, consult Customer Service Center. Material: Nylon Material: Nylon Finish: Matte Finish: Matte 704D02000 Sealing Boot 759D02000 Sealing Boot 703D02000 Sealing Boot .204 (5,2) ø 2 [0.079] 16 [0.630] ø .331 (8,4) .464 (11,79) F .524 (13,3) 15/32-32 NS-2A 1/4-40 uns-2A nut 15/32-32, NS-2A NOTE: For use with T, TP and T2P style actuators. Cannot be used for Switch Functions: 7103, 7203, 7303, 7403, NOTE: For use with T and TP style actuators. Cannot NOTE: For use with S actuator style when combined 7107, 7207, 7307, and 7407. be used for Switch Functions: 7103, 7203, 7303, with D, H, H3, Y, and Y4 bushings 7403, 7107, 7207, 7307, 7407. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 may 18 www.ckswitches.com F–16 .658 (16,7) Toggle .945 (24,0) .657 (16,7)