7000 Series Miniature Rocker & Lever Handle Switches Features/Benefits Typical Applications • Multi-pole and multi-position • Telecommunications • Wide variety of actuator and • Instrumentation termination options • Medical equipment • Epoxy terminal-seal compatible with bottom wash cleaning • RoHS compliant Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC; diallyl phthalate (DAP) (UL 94V-0). 2 AMPS @ 250 V AC. See page G-20 for additional ratings. ACTUATOR: Nylon, black. ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break FRAME (FRONT MOUNT): Nylon, black. cycles at full load. All other models: 40,000 cycles. FRAME (REAR MOUNT): Spring steel, black. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 BUSHING: Brass or zinc, nickel plated. V DC, 100 mA, for both silver and gold plated contacts. HOUSING: Stainless steel. 9 INSULATION RESISTANCE: 10 Ω min. SWITCH SUPPORT: Brass or steel, matte-tin plated. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. END CONTACTS: B contact material: Copper alloy, with gold plate over OPERATING TEMPERATURE: –30ºC to 85ºC. nickel plate. Q contact material: Coin silver, silver plated. See page SOLDERABILITY: Per MIL-STD-202F method 208D, or G-20 for additional contact materials. EIA RS-186E method 9 (1 hour steam aging). CENTER CONTACTS & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper NOTE: Any models supplied with S, P, R, Q, B or G contact material are RoHS compliant. alloy, silver plated. See page G-20 for additional contact materials. NOTE: Specifications and materials listed above are for switches with standard options. TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical For information on specific and custom switches, consult Customer Service Center. Data Section HARDWARE: Mounting nuts & screws: Brass. Lockwasher: Stainless steel. Standoff: Nylon standard. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-4 through G-24 . For additional options not shown in catalog, consult Customer Service Center. All mod- els have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function Contact Material 7101 SP On-None-On Actuator B Gold 7103 SP On-Off-On J1 .531 long rocker P Gold, matte tin Terminations 7105 SP Mom.-Off-Mom. J2 Lever Q Silver A Right angle, PC thru-hole 7107 SP On-Off-Mom. J3 .906” long rocker S Silver, matte-tin AV2 Vertical right angle, PC thru-hole 7108 SP On-None-Mom. J10 1.318” long rocker G Gold over silver C PC Thru-hole 7109 SP None-On-Mom. J11 Rocker with frame R Gold over silver, matte-tin Z Solder lug 7201 DP On-None-On J15 Rocker, snap-in A3 Right angle, snap-in, PC thru-hole 7203 DP On-Off-On J16 Rocker with frame, snap-in AV3 Vertical right angle, 7205 DP Mom.-Off-Mom. J19 Rocker with frame Seal snap-in, PC thru-hole 7207 DP On-Off-Mom. J21 Lever with frame E Epoxy AW3 Right angle, extended, PC thru-hole 7208 DP On-None-Mom. I Epoxy potted base J25 Lever, snap-in V2 .555” high, V-bracket 7211 DP On-On-On J26 Lever with frame, snap-in V3 .460” high, V-bracket 7213 DP On-On-Mom. J37 Rocker with frame V4 .630” high, V-bracket 7215 DP Mom.-On-Mom. Actuator Color J50 Rocker V5 Vertical right angle, PC thru-hole 7301 3P On-None-On 2 Black Frame Color J51 Rocker with frame V6 .460” high, V-bracket 7303 3P On-Off-On 1 White 2 Black J52 Rocker with frame for V7 .630” high, V-bracket 7401 4P On-None-On 3 Red NONE No frame color required LED, snap-in V8 .953” high, V-bracket 7405 4P Mom.-Off-Mom. 1 White J60 Lever V9 1.150” high, V-bracket 7411 4P On-On-On Metal Frame Color J61 Lever with frame, snap-in V31 .460” high, V-bracket, snap-in Note: UL models (J11, J19, J21 & J62 Lever with frame for available, see pages G-5 V51 Vertical right angle, snap-in J37 Actuators) LED, snap-in and G-6. V61 .460” high, V-bracket, snap-in 2 Black J90 Lever W .750” long, wire wrap 1 White J91 Lever with frame, snap-in W3 .425” long, wire wrap W5 1.305” long,wire wrap Z3 Quick connect Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–4 Rocker Rocker 7000 Series Miniature Rocker & Lever Handle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 UL** NO. MODEL C&K marking on opposite side C&K marking on opposite side POLES MODEL NO. NO. SCHEMATIC 7101 U11 ON NONEON N/A 7103 U13 ON OFF ON 7105 U15 MOM. OFF MOM. 2-3 OPEN 2-1 SP 7107 U17 ON OFF MOM. 7108 U18 ON NONEMOM. N/A SPDT 7109 U19 NONEON MOM. N/A 2-3 2-1 SPDT Terminal Nos. Part number shown: 7101J1ZQE2 For Reference Only 7201 U21 ON NONE ON N/A 7203 U23 ON OFF ON 7205 U25 MOM. OFF MOM. OPEN 7207 U27 ON OFF MOM. 2-3,5-6 2-1,5-4 DP 7208 U28 ON NONEMOM. N/A 7211* U211* ON ON ON 7213* U213* ON ON MOM. 2-3,5-4 DPDT 7215* U215* MOM. ON MOM. DPDT Terminal Nos. Part number shown: 7201J1ZQE2 For Reference Only MOM. = Momentary * Wiring for 3-way switch, see Section N. ** U11 through U413 model nos. with all options when ordered with G, Q, R or S contact material. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–5 7000 Series Miniature Rocker & Lever Handle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 UL** NO. MODEL NO. MODEL POLES NO. C&K marking on opposite side C&K marking on opposite side SCHEMATIC N/A 7301 U31 ON NONE ON 3P 2-3,5-6,8-9 2-1,5-4,8-7 OPEN 7303 U33 ON OFF ON 3PDT 3PDT Part number shown: 7301J1ZQE2 Terminal Nos. For Reference Only N/A 7401 U41 ON NONE ON 4P 7405 U45 MOM. OFF MOM. 2-3,5-6,8-9,11-12 2-1,5-4,8-7,11-10 OPEN 7411* U411* ON ON ON 4PDT 2-3,5-4,8-9,11-10 4PDT Part number shown: 7401J1ZQE2 Terminal Nos. For Reference Only MOM. = Momentary * Wiring for 3-way switch: See Technical Data section of this ** U11 through U411 model nos. with all options when ordered with G, Q, R or S contact material. catalog for RoHS compliant and compatible definitions and specifications. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–6 Rocker Rocker 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–PANEL REAR MOUNT ACTUATOR J1  ROCKER OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED Finish: Matte. Other colors, custom actua- tor markings and legends available, consult Customer Service Center. NOTE: Hardware: two each—mounting screws, nuts, lockwashers and standoffs for 1/8 inch thick panel are supplied standard on all switches with J2  LEVER panel mounting brackets. Actuators available separately, see page G-21 through G-22. Hardware is available see Technical Data section of this catalog. J1, J2, J3 & J10 Actuators available with C, W-W5, Z or Z3 terminations. PANEL MOUNTING J1 & J2 Actuators J3  ROCKER DIMPLES MFG. OPTION J3 Actuator J10  ROCKER DIMPLES MFG. OPTION J10 Actuator Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–7 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–SNAP-IN FRONT MOUNT ACTUATOR FRAME COLOR J15  ROCKER, SNAP-IN OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED No frame color choice required OPTION CODE FRAME COLOR J16  ROCKER WITH FRAME, SNAP-IN 2 BLACK No Frame Color NONE (J15 or J25options) 1 WHITE Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-21 through G-22. J15, J16, J25, J26, J50 & J51 Actuators avail- able with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z and Z3 terminations. J25  LEVER, SNAP-IN PANEL MOUNTING J15, J16, J25 & J26 Actuators No frame color choice required J26  LEVER WITH FRAME, SNAP-IN J50 Actuator * J50  ROCKER, SNAP-IN * For J50: Increase this dimension to .620/.625 (15,75/15,88) for .091/.125 (2,31/3,18) thk. panels. No frame color choice required Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–8 Rocker Rocker 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–SNAP-IN FRONT MOUNT ACTUATOR FRAME COLOR J51  ROCKER WITH FRAME, SNAP-IN OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED OPTION J52  ROCKER WITH FRAME FOR LED, SNAP-IN CODE FRAME COLOR 2 BLACK No Frame Color NONE (J15 or J25 options) 1 WHITE Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-21 through G-22. J51, J52, J60 & J61 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z and Z3 terminations. LED not included. For LED information, see page G-24. J60  LEVER, SNAP-IN PANEL MOUNTING J51, J60 & J61 Actuators * No frame color choice required J52 Actuator * J61  LEVER WITH FRAME, SNAP-IN For J51, J52: Increase this dimension to .620/.625 (15,75/15,88) for .060/.125(1,52/3,18) thk. panels. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–9 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–SNAP-IN FRONT MOUNT ACTUATOR FRAME COLOR ACTUATOR COLOR J62  LEVER WITH FRAME FOR LED, SNAP-IN OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED OPTION CODE FRAME COLOR 2 BLACK No Frame Color NONE LED not included. (J90 options) For LED information, see page H-25. 1 WHITE J90  LEVER, SNAP-IN Finish: Matte. Other colors, custom actua- tor markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-21 through G-22. J62, J90 & J91 Actuators available with 71XX, 72XX, U1XX & U2XX models and C, W-W5, Z & Z3 terminations. PANEL MOUNTING J62 Actuator * No frame color choice required. J91  LEVER WITH FRAME, SNAP-IN J90, J91 & J93 Actuators * * For J90: Increase this dimension to .620/.625 (15,75/15,88) for .091/.125 (2,31/3,18) thk. panels. For J91: Increase this dimension to .620/.625 (15,75/15,88) for .060/.125 (1,52/3,18) thk. panels. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–10 Rocker Rocker 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR–REAR MOUNT ACTUATOR FRAME COLOR J11  ROCKER WITH FRAME OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED OPTION CODE FRAME COLOR J19  ROCKER WITH FRAME 2 BLACK 1 WHITE Actuator finish: Matte. Frame finish: Gloss. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Actuators & frames available separately, see pages G-21 through G-22. J11, J19, J21 & J37 Actuators available with C, W-W5, Z & Z3 terminations. J37 offered with Black Frame (2 color option) only. PANEL MOUNTING J11 & J21 Actuators J21  LEVER WITH FRAME J19 Actuator J37  ROCKER WITH FRAME .313 (7,95) J37 Actuator Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–11 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–PC MOUNT ACTUATOR J1  ROCKER OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED J2  LEVER Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Some permissible actuator/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. Actuators available separately, see page G-21 through G-22. J1, J2 actuators available with A, A3, AV2, AV3, AW3 & V2 terminations. J3 actuators available with AV2, AV3 & V2-V61 terminations. J50 actuators available with A (DP, 3P models only), A3 (DP, 3P models only), AV2, AV3, AW3 (DP, 3P models only) & V2-V61 terminations. J3  ROCKER J50  ROCKER Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–12 Rocker Rocker 7000 Series Miniature Rocker & Lever Handle Switches ACTUATOR COLOR ACTUATOR–PC MOUNT ACTUATOR J60  LEVER OPTION ACTUATOR CODE COLOR 2 BLACK 1 WHITE 3 RED Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. NOTE: Some permissible actuator/termination combinations may lack clearance between actuator and PC board, and care must be exercised to accommodate this condition. J90  LEVER Actuators available separately, see page G-21 through G-22. J60 & J90 actuators available with A (DP, 3P models only), A3 (DP, 3P models only), AV2, AV3, AW3 (DP, 3P models only) & V2-V61 terminations. TERMINATIONS Z  SOLDER LUG C  PC THRU-HOLE PC MOUNTING Not available with P, R or S contact materials. SPDT thru 4PDT SPDT thru 4PDT NOTE: Available actuators, see pages G-7 through G-13. Available actuators, see pages G-7 through G-13. Z3  QUICK CONNECT W, W3, W5  WIRE WRAP OPTION CODE DIM ‘A’ W .750 (19,05) Dim 'A' W3 .425 (10,80) W5 1.305 (33,15) Not available with P, R or S contact materials. Available actuators, see pages G-7 through G-13. Mating quick connector available; order part number 530100000, SPDT thru 4PDT page G-22. SPDT thru 4PDT NOTE: Available actuators, see pages G-7 through G-13. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–13 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS A  RIGHT ANGLE, PC THRU-HOLE 7101J1ABE2 Horizontal Actuation SECTION A-A SPDT Actuator Shown In Pos. 1 A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE AW3  RIGHT ANGLE, EXTENDED, PC THRU-HOLE PC MOUNTING .14 (3,6) Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. NOTE: PC pattern must clear switch support leg. A  RIGHT ANGLE, PC THRU-HOLE 7201J1ABE2 SECTION A-A Actuator Shown In Pos. 1 Horizontal Actuation DPDT A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–14 Rocker Rocker 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS A  RIGHT ANGLE, PC THRU-HOLE 7301J1ABE2 Actuator Shown In Pos. 1 Horizontal Actuation SECTION A-A 3PDT PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7101J1AV2BE2 Vertical Actuation Actuator Shown In Pos. 1 SPDT SECTION A-A AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–15 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7201J1AV2BE2 Vertical Actuation SECTION A-A Actuator Shown In Pos. 1 DPDT AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7301J1AV2BE2 Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A 3PDT AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, PC MOUNTING .150” PITCH Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–16 Rocker Rocker 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7401J1AV2BE2 Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A 4PDT AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. V5  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7101J1V5BE2 Actuator Shown In Pos. 1 Vertical Actuation SECTION A-A SPDT V51  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–17 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V5  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH 7201J1V5BE2 Actuator Shown In Pos. 1 SECTION A-A Vertical Actuation DPDT V51  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH PC MOUNTING Not available with I seal option. Available actuators, see pages G-6 and G-12. Terminal bend radii and lead-in manufacturing option. V2, V6, V7, V8  VERTICAL MOUNT, V-BRACKET V61  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING 7101J1__BE2 SPDT OPTION CODE DIM ‘A’ V2, V21 .555 (14,10) V6, V61 .460 (11,68) Actuator Shown In Pos. 1 Actuator Shown In Pos. 1 V7 .630 (16,00) V8 .953 (24,21) Not available with I seal option. Available actuators, see pages G-6 and G-12. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–18 Rocker Rocker 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V2, V6, V7, V8  VERTICAL MOUNT, V-BRACKET PC MOUNTING V21, V61  VERTICAL MOUNT, V-BRACKET, SNAP-IN SNAP-IN OPTION CODE DIM ‘A’ 7201J1__BE2 V2, V21 .555 (14,10) DPDT Actuator Shown In Pos. 1 V6, V61 .460 (11,68) V7 .630 (16,00) Not available with I seal option. V8 .953 (24,21) Available actuators, see pages G-6 and G-12. V2, V7, V8  VERTICAL MOUNT, V-BRACKET V21  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING SNAP-IN OPTION CODE DIM ‘A’ 7301J1__BE2 V2, V21 .555 (14,10) 3PDT Actuator Shown In Pos. 1 V7 .630 (16,00) Not available with I seal option. V8 .953 (24,21) Available actuators, see pages G-6 and G-12. V2, V7, V8  VERTICAL MOUNT, V-BRACKET PC MOUNTING V21  VERTICAL MOUNT, V-BRACKET, SNAP-IN SNAP-IN OPTION CODE DIM ‘A’ V2, V21 .555 (14,10) 7401J1__BE2 V7 .630 (16,00) 4PDT Actuator Shown In Pos. 1 V8 .953 (24,21) Not available with I seal option. Available actuators, see pages G-6 and G-12. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–19 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V3, V4, V9  VERTICAL MOUNT, V-BRACKET V31  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING 7101J1__BE2 SPDT SNAP-IN OPTION CODE DIM ‘A’ Actuator Shown In Pos. 1 V3, V31 .460 (11,68) V4 .630 (16,00) Not available with I seal option. V9 1.150 (29,21) Available actuators, see pages G-6 and G-12. V3, V4, V9  VERTICAL MOUNT, V-BRACKET V31  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING 7201J1__BE2 DPDT SNAP-IN OPTION CODE DIM ‘A’ V3, V31 .460 (11,68) Actuator Shown In Pos. 1 V4 .630 (16,00) Not available with I seal option. V9 1.150 (29,21) Available actuators, see pages G-6 and G-12. V4, V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING 7301J1__BE2 3PDT SNAP-IN OPTION SNAP-IN CODE DIM ‘A’ V4 .630 (16,00) Actuator Shown In Pos. 1 V9 1.150 (29,21) Actuator Shown In Pos. 1 Not available with I seal option. Available actuators, see pages G-6 and G-12. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–20 Rocker Rocker 7000 Series Miniature Rocker & Lever Handle Switches TERMINATIONS V4, V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING SNAP-IN 7401J1__BE2 OPTION CODE DIM ‘A’ 4PDT Actuator Shown In Pos. 1 V4 .630 (16,00) Not available with I seal option. V9 1.150 (29,21) Available actuators, see pages G-6 and G-12. CONTACT MATERIAL OPTION CONTACT TERMINAL CODE MATERIAL PLATING RATINGS 1 GOLD LOW LEVEL/ B 1 GOLD 6 DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX. MATTE-TIN P 5 Q SILVER 4,5 SILVER POWER 5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. 6 MATTE-TIN S 3 GOLD G LOW LEVEL/DRY 2,3 0 4 VA MAX @ 20 V AC OR DC MAX OR 5 AMPS @ GOLD OVER SILVER 6 MATTE-TIN CIRCUIT OR POWER 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC. R * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 U11-U415 model numbers with all options when ordered with CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. G, Q, S & R contact material. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. B contact material standard with all terminations except C, Z & Z3. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate Q contact material standard with C, Z & Z3 terminations. over nickel plate. 4 P, S & R, contact materials not available with Z & Z3 terminations. END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. NOTE: Any models supplied with Q, B, G S, P & R contact material are RoHS compliant. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. SEAL E  EPOXY SEAL I  EPOXY POTTED BASE 'A' NO. POLES DIM ‘A’ SP .410 (10,41) DP .440 (11,18) 3P .505 (12,83) 4P .505 (12,83) Available with C, W through W5, Z & Z3 terminations. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–21 7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE Panel mounting hardware for rocker and lever handle switches is TYPICAL ASSEMBLY available separately. Mounting hardware consists of two screws, SCREW two nuts, two standoffs and two lockwashers per switch, and is available for panel thicknesses of 1/16, 3/32 and 1/8 inch. PANEL THICKNESS See part numbers below. Qty Part Number Description STAND-OFF LENGTH STAND-OFF 2 761103000 Standoffs 2 764100000 Mounting screws LOCKWASHER NUT 2 764200000 Lock washers 2 764300000 Hex nuts J3 actuators J1 & J2 actuators PART NO. PANEL THK. STANDOFF LENGTH PART NO. PANEL THK. STANDOFF LENGTH 761103000 1/8 IN. (3,18) .233 (5,92) 770603000 1/8 IN. (3,18) .233 (5,92) J10 actuators PART NO. PANEL THK. STANDOFF LENGTH 770703000 1/8 IN. (3,18) .233 (5,92) MATERIAL Screws, nuts, lockwashers: Stainless steel. Standoffs: Nylon, standard. J1, J11, J15 & J16 Actuators J2, J21, J25 & J26 Actuators J3 & J37 Actuators PART NO. PART NO. PART NO. 776A01000 WHITE 426D01000 WHITE 431D01000 WHITE 776A02263 BLACK 426D02263 BLACK 431D02263 BLACK 776A03000 RED 426D03000 RED 431D03000 RED Material: Nylon Material: Nylon Material: Nylon Finish: Matte Finish: Matte Finish: Matte J50, J51 & J52 Actuators J60, J61 & J62 Actuators PART NO. PART NO. 775A01000 WHITE 598101000 WHITE 775A02263 BLACK 613802263 BLACK 775A03000 RED 598103000 RED Material: Nylon Material: Nylon Finish: Matte Finish: Matte Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–22 Rocker Rocker 7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE J90 & J91 Actuators J10 & J19 Actuators Fits Z3 Termination female connector PART NO. PART NO. 598001000 WHITE 769501000 WHITE 598002263 BLACK 769502263 BLACK PART NO. 598003000 RED 769503000 RED 530100000 Material: Nylon Material: Nylon Finish: Matte Finish: Matte Available in loose pieces. Frame for J11 & J21 Actuators Frame for J16 & J26 Actuators Frame for J51, J61 & J91 Actuators PART NO. PART NO. PART NO. 459101000 WHITE 615601000 WHITE 764500746 BLACK ENAMEL 459102000 BLACK 615602263 BLACK 764500747 WHITE ENAMEL 459103000 RED 615603000 RED 764601106 RETAINING SPRING Material: Nylon Material: Nylon Finish: Matte Finish: Matte Material: Spring Steel Frame for J19 Actuator Frame for J37 Actuator Frame for J52 & J62 Actuators PART NO. 613301000 WHITE PART NO. 613302263 BLACK PART NO. 613303000 RED 781000746 BLACK ENAMEL 445400746 BLACK ENAMEL 781000747 WHITE ENAMEL Material: Nylon Material: Spring Steel Finish: Matte Material: Spring Steel Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–23 7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator TYPICAL APPLICATION and frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte. J1 & J2 Actuators .047” (1,19) PANEL THK. .062” (1,57) PANEL THK. .090” (2,29) PANEL THK. .125” (3,18) PANEL THK. PART NO. PART NO. PART NO. PART NO. 452902263 452702263 452802263 452602263 BLACK J50, J60 & J90 Actuators .047” (1,19) PANEL THK. .062” (1,57) PANEL THK. .090” (2,29) PANEL THK. .125” (3,18) PANEL THK. PART NO. PART NO. PART NO. PART NO. 432502263 432602263 432702263 432802263 BLACK PANEL MOUNTING For part numbers For part numbers For part numbers 4529xxxxx, 4527xxxxx, 4325xxxxx, 4326xxxxx 4327xxxxx, 4328xxxxx 4528xxxxx, 4526xxxxx .005 R. MAX. .005 R. .005 R. .495 – .505 .495 – .505 .495 – .505 (0,13) TYP. (0,13) (0,13) (12,57 – 12,83) (12,57 – 12,83) (12,57 – 12,83) MAX. TYP. MAX. TYP. .797 – .803 .595 – .605 .620 – .625 (20,24 – 20,40) (15,11 – 15,37) (15,75 – 15,88) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–24 Rocker Rocker 7000 Series Miniature Rocker & Lever Handle Switches AVAILABLE HARDWARE Panel Inserts Will fit Separate Snap-in frames for Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for J50, J60 & J90 actuators indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PANEL INSERT BLANK PANEL INSERT WITH HOLE FOR LED WITHOUT HOLE FOR LED PART NO. PART NO. 894902000 476602000 BLACK NOTE: Special colors, custom markings available, consult Customer Service Center. LED INFORMATION .025 SQ. Flat denotes .200 DIA. TYP. (0,63) cathode. (5,08˘) Process Information: Soldering to LED leads must be completed within 5 seconds at 500º F (260ºC) maximum. .030 .230 DIA. LEDs are not supplied with J52, J62 options. LED snaps into switch frame surrounding (0,76) (5,84˘) actuator and is wired externally. .750 .340 (19,05) (8,64) Suggested LED for J52 & J62 options. Dimensions for reference only. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G 27 mar 17 www.ckswitches.com G–25