Toggle T Series Subminiature Toggle Switches Features/Benefits Typical Applications • Compact size—small footprint • Hand-held telecommunications • Single and double pole models • Instrumentation • PC and panel mount • Medical equipment options available • RoHS compliant models available Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or DC max. Q contact material (TX01 models): 3 AMPS @ diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame 120 V AC or 28 V DC. All other models: 2 AMPS @ retardant, heat stabilized. 120 V AC or 28 V DC. See page F-42 for additional ratings. ACTUATOR: Brass, chrome plated. ELECTRICAL LIFE: TX01 models: 60,000 make-and-break BUSHING: Brass, nickel plated. cycles at full load. All other models: 30,000 cycles. HOUSING: Stainless steel. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ SWITCH SUPPORT: Brass, matte-tin plated. 2-4 V DC, 100 mA, for both silver and gold plated contacts. END CONTACTS: B contact material: Copper alloy, with gold plate 9 INSULATION RESISTANCE: 10 Ω min. over nickel plate. Q contact material: Coin silver, silver plated. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. See above for additional contact materials. OPERATING TEMPERATURE: –30ºC to 85ºC. CENTER CONTACTS & TERMINALS: B contact material: Copper alloy, SOLDERABILITY: Per MIL-STD-202F method 208D, or with gold plate over nickel plate. Q contact material: Copper alloy, EIA RS-186E method 9 (1 hour steam aging). silver plated. See page F-42 for additional contact materials. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant and compatible. HARDWARE: Nut & Locking Ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. Additional hardware available NOTE: Specifications and materials listed above are for switches with standard options. separately, see Section N. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F-38 thru F-42. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function T101 SPDT On-None-On T102 SPDT Off-None-On Actuator T103 SPDT On-Off-On P3 Flatted, T105 SPDT Mom.-Off-Mom. Bushing anti-rotation, H .220” high, threaded, flat T107 SPDT On-Off-Mom. .490” high Terminations Seal T108 SPDT On-None-Mom. S .370” high H9 .220” high, unthreaded, flat A Right angle, PC thru-hole E Epoxy CF Splashproof, .310” high, threaded, flat T201 DPDT On-None-On K Locking lever, round tip AV Vertical right angle, T203 DPDT On-Off-On L1 .640” high D9 .260” high, unthreaded, keyway PC thru-hole T205 DPDT Mom.-Off-Mom. T .310” high, threaded, flat M1 .220” high C PC Thru-hole T9 .310” high, unthreaded, flat T207 DPDT On-Off-Mom. S1 .410” high V3 Vertical mount V-bracket T208 DPDT On-None-Mom. M .210” high TD .260” high, threaded, keyway Z Solder lug TK .310” high, threaded, keyway T211 DPDT On-On-On. L .290” high W Wire wrap Y .220” high, threaded, keyway Contact Material Y9 .220” high, unthreaded, keyway B Gold P Gold, matte tin Q Silver F G Gold over silver R Gold over silver, matte-tin Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–37 T Series Subminiature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2POS. 3 NO. MODEL C&K marking on opposite side C&K marking on opposite side POLES NO. SCHEMATIC T101 ON NONEON 2-3 N/A 2-1 T103 ON OFF ON T105 MOM. OFF MOM. 2-3 OPEN 2-1 SP T107 ON OFF MOM. SPDT T108 ON NONE MOM. 2-3 NA 2-1 SPST T102 OFF NONEON OPEN N/A 3-1 SPDT .338 (8,57) Part number shown: T101SHZQE SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2POS. 3 NO. MODEL POLES NO. C&K marking on opposite side C&K marking on opposite side SCHEMATIC T201 ON NONEON 2-3,5-6 N/A 2-1,5-4 T203 ON OFF ON 2-3,5-6 OPEN 2-1,5-4 DP T205 MOM. OFF MOM. T208 ON NONEMOM.2 2-3,5-6 N/A -1,5-4 ON ON ON. 2-3,5-6 2-3,5-4 2-1,5-4 T211* DPDT DPDT .338 (8,57) Terminal Nos. Part number shown: T201SHZQE For Reference Only F MOM. = Momentary * Wiring for 3-way switch refer to page N-10 All models with all options when ordered with G, L, R or Q contact material. Third Angle Projection Dimensions are shown: Inches (mm) Dimensions are shown:IN (mm) Specifications and dimensions subject to change Specications and dimensions subject to change www.ckswitches.com www.ittcannon.com F–38 G–37 Toggle Toggle T Series Subminiature Toggle Switches ACTUATOR M  .210” HIGH S  .370” HIGH M1  .220” HIGH S1  .410” HIGH (with “T” bushing) (with “T” bushing) 2 1 1 2 .214 (5,44) Standard with A, AV or V3 terminations. Standard with Z, C or W terminations. L  .290” HIGH L1  .640” HIGH P3  ANTI-ROTATION, FLATTED, .450” HIGH 1 2 Actuator shown with standard H bushing. Subtract .040 (1,02) for TD and D9 bushings, subtract .090 (2,29) for T, T9, TK, K9 & CF bushings. 1 2 Actuators shown with T, T9, TK & CF bushings, add .050 (1,27) for TD and D9 bushings, add .090 (2,29) for H, H9, Y & Y9 bushings. All actuators have chrome finish (except K). Available with T & T9 bushings only. Dress nut part number 709901201 supplied standard with threaded bushing. K  LOCKING LEVER Locking Positions –01 & –02 Models –03 & –11 Models –08 Models 2 Position lock 3 Position lock 1 Position lock K actuators have natural aluminum finish. Keyway on right side. To prevent accidental actuation, toggles must be lifted before being actuated. When released, toggles Not available with CF bushing option. again lock in place. Overtightening mounting nut may cause Bushing option code not required. Not available with TX05 & TX07 models. actuator to bind. BUSHING H  .220” HIGH THREADED, FLAT Y  .220” HIGH THREADED, KEYWAY T  .310” HIGH THREADED, FLAT H9  .220” HIGH UNTHREADED, FLAT Y9  .220” HIGH UNTHREADED, KEYWAY T9  .310” HIGH UNTHREADED, FLAT F H standard with C, W & Z terminations. H9 standard with A, AV & V3 terminations. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–39 T Series Subminiature Toggle Switches BUSHING TK  .310” HIGH THREADED, KEYWAY TD  .260” HIGH THREADED, KEYWAY CF  SPLASHPROOF, .310” HIGH THREADED, FLAT D9  .260” HIGH UNTHREADED, KEYWAY IP67 Degree of protection. Internal o-ring actuator seal and external bushing seal washer standard. Not available with K locking lever option. 10-48 BUSHING PANEL MOUNTING 1/4 IN. BUSHING With Standard Locking Ring Without Locking Ring Without Locking Ring Without Locking Ring Without Locking Ring With Small Locking Ring With Standard Locking Ring TERMINATIONS Z  SOLDER LUG C  PC THRU-HOLE SP DP SP DP PC MOUNTING Not available with P or R contact materials. T102 – omit center hole. W  WIRE WRAP SP DP F Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–40 Toggle Toggle T Series Subminiature Toggle Switches TERMINATIONS A  RIGHT ANGLE, PC THRU-HOLE PC MOUNTING .214 (5,44) .022 (0,56) .128 (3,25) T101MH9ABE Horizontal Actuation Actuator Shown In Pos. 1 SPDT Not available with T102 model. A  RIGHT ANGLE, PC THRU-HOLE PC MOUNTING .214 (5,44) .022 (0,56) .128 (3,25) T201MH9ABE Horizontal Actuation DPDT Actuator Shown In Pos. 1 AV  VERTICAL RIGHT ANGLE, PC THRU-HOLE PC MOUNTING .214 (5,44) .026 (0,66) .153 (3,89) T101MH9AVBE Actuator Shown In Pos. 1 Vertical Actuation T102 Models: Omit terminal 2 SPDT NOTE: Terminal bend radii and lead-in manufacturing option. AV  VERTICAL RIGHT ANGLE, PC THRU-HOLE PC MOUNTING .214 (5,44) .022 (0,56) Actuator Shown In Pos. 1 .153 T201MH9AVBE (3,89) Vertical Actuation NOTE: Terminal bend radii and lead-in manufacturing option. DPDT V3  VERTICAL MOUNT, V-BRACKET PC MOUNTING .214 Actuator Shown (5,44) In Pos. 1 F .358 (9,08) T101MH9V3BE T102 Models: SPDT Omit center hole. T102 Models: Omit terminal 2 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–41 T Series Subminiature Toggle Switches TERMINATIONS V3  VERTICAL MOUNT, V-BRACKET .214 (5,44) PC MOUNTING T201MH9V3BE DPDT Actuator Shown In Pos. 1 CONTACT MATERIAL OPTION CONTACT TERMINAL CODE MATERIAL PLATING RATINGS B 1 GOLD 1 GOLD LOW LEVEL/ 0.4 VA MAX. @ 20 V AC OR DC MAX. 6 MATTE-TIN P DRY CIRCUIT TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC. 4,5 Q SILVER 5 SILVER POWER ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC. TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR G 3 GOLD LOW LEVEL/DRY GOLD OVER 3 AMPS @ 120 V AC OR 28 V DC. 6 CIRCUIT OR POWER 2,3 MATTE-TIN ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. SILVER R OR 2 AMPS @ 120 V AC OR 28 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. All models with all options when ordered with R, G, or Q contact material. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. B contact material standard with A, AV, V3 & W terminations. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate Q contact material standard with C & Z terminations. over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. SEAL E  EPOXY SEAL AVAILABLE HARDWARE .204 (5,2) 759D02000  SEALING BOOT F * Note: For use with S1 actuator style when combined with T, TK, and CF bushings. .524 (13,3) 1/4-40 uns-2A nut Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–42 .658 (16,7) Toggle