T Series Subminiature Rocker Switches Features/Benefits Typical Applications • Compact size—small footprint • Telecommunications • Single and double pole models • Instrumentation • PC and panel mounting options available • Medical Equipment • RoHS compliant Models Available Specifications Materials CONTACT RATING: Q contact material (TX01 models): 3 AMPS @ CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or 120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame 28 V DC. See page G-49 for additional ratings. retardant, heat stabilized. ELECTRICAL LIFE: TX01 models: 60,000 make-and-break ACTUATOR: Nylon, black standard. cycles at full load. All other models: 30,000 cycles. BUSHING: Brass, nickel plated. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ HOUSING: Stainless steel. 2–4 V DC, 100 mA, for both silver and gold plated contacts. SWITCH SUPPORT: Brass, matte-tin plated. 9 INSULATION RESISTANCE: 10 Ω min. MOUNTING BRACKET: Stainless steel. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. END CONTACTS: B contact material: Copper alloy, with gold plate OPERATING TEMPERATURE: –30ºC to 85ºC. over nickel plate. Q contact material: Coin silver, silver plated. SOLDERABILITY: Per MIL-STD-202F method 208D, or See page G-49 for additional contact materials. EIA RS-186E method 9 (1 hour steam aging). CENTER CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, NOTE: Any models supplied with B, G, P, Q or R contact material are RoHS compliant. silver plated. See page G-49 for additional contact materials. TERMINAL SEAL: Epoxy. NOTE: Specifications and materials listed above are for switches with standard options. HARDWARE: Nut, Screws & Lockwasher: Stainless steel. For information on specific and custom switches, consult Customer Service Center. Standoff: Nylon standard. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-46 through G-50. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function T101 SP On-None-On Actuator T102 SP Off-None-On J1 Rocker, .300” wide T103 SP On-Off-On J6 Rocker, .230” wide T105 SP Mom.-Off-Mom. Terminations T107 SP On-Off-Mom. A Right angle, PC thru-hole T201 DP On-None-On AV Vertical Right angle, PC thru-hole T205 DP Mom.-Off-Mom. Z Solder lug Contact Material V3 V-bracket B Gold P Gold, matte-tin Q Silver G Gold over silver R Gold over silver, matte-tin Seal E Epoxy Actuator Color 2 Black Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–46 Rocker Rocker T Series Subminiature Rocker Switches ACTUATOR COLOR SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 NO. MODEL C&K marking on opposite side C&K marking on opposite side POLES NO. SCHEMATIC T101 ON NONEON N/A T103 ON OFF ON 2-3 2-1 SP T105 MOM.OFF MOM. OPEN SPDT T107 ON OFF MOM. SPST OPEN N/A 3-1 T102 OFF NONEON SPDT PANEL MOUNTING Terminal Nos. Part number shown: T101J6ZBE2 For Reference Only T201 ON NONEON N/A DP 2-3,5-6 2-1,5-4 OPEN T205 MOM.OFF MOM. DPDT DPDT PANEL MOUNTING Terminal Nos. Part number shown: T201J1ZBE2 For Reference Only MOM. = Momentary All models with all options when ordered with G, Q or R contact material. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–47 T Series Subminiature Rocker Switches ACTUATOR ACTUATOR J1  ROCKER, .300 WIDE PANEL MOUNTING OPTION ACTUATOR CODE COLOR 2 BLACK Actuators available separately, see page G 50. Finish: Matte. Other colors, custom actu- Standard with all models except T10X with A terminations. ator markings and legends available, consult Customer Service Center. J6  ROCKER, .230 WIDE PANEL MOUNTING Standard with T10X model with A terminations. TERMINATIONS Z  SOLDER LUG SP DP SP and DP Not available with P or R contact material. A  RIGHT ANGLE, PC THRU-HOLE PC MOUNTING T101J6ABE2 Horizontal Actuation SPDT Not available with T102 model. J6 actuator standard only on T10X models with A terminations. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–48 Rocker Rocker T Series Subminiature Rocker Switches TERMINATIONS A  RIGHT ANGLE, PC THRU-HOLE T201J1ABE2 Horizontal Actuation DPDT AV  VERTICAL RIGHT ANGLE, PC THRU-HOLE T101J1AVBE2 Vertical Actuation SPDT NOTE: Terminal bend radii and lead-in manufacturing option. AV  VERTICAL RIGHT ANGLE, PC THRU-HOLE T201J1AVBE2 Vertical Actuation DPDT NOTE: Terminal bend radii and lead-in manufacturing option. V3  VERTICAL MOUNT, V-BRACKET T101J1V3BE2 SPDT Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–49 T Series Subminiature Rocker Switches TERMINATIONS V3  VERTICAL MOUNT, V-BRACKET T201J1V3BE2 DPDT CONTACT MATERIAL OPTION CONTACT TERMINAL CODE MATERIAL PLATING RATINGS 1 GOLD B LOW LEVEL/ 0.4 VA MAX. @ 20 V AC OR DC MAX. 3 GOLD 6 DRY CIRCUIT MATTE-TIN P 4,5 5 TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC. SILVER SILVER Q POWER ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC. 3 GOLD G TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR LOW LEVEL/DRY GOLD OVER 3 AMPS @ 120 V AC OR 28 V DC. 2,3 CIRCUIT OR POWER ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR SILVER 6 MATTE-TIN 2 AMPS @ 120 V AC OR 28 V DC. R * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. NOTE: Any models supplied with B, G, P, Q & R contact material are RoHS compliant. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. All models with all options when ordered with G, Q, or R contact material. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate B contact material standard with A, AV, V3 terminations. over nickel plate. Q contact material standard with C & Z terminations. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. P & R contact materials not available with Z terminations. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. SEAL E  EPOXY SEAL Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–50 Rocker Rocker T Series Subminiature Rocker Switches AVAILABLE HARDWARE Panel mounting hardware for rocker and lever handle switches is available separately. Mounting hardware consists of two screws, two nuts, two standoffs and two lockwashers per switch, and is available for panel thicknesses of 1/16, 3/32 and 1/8 inch. TYPICAL ASSEMBLY See part numbers below. SCREW PANEL THICKNESS STAND-OFF LENGTH STAND-OFF LOCKWASHER NUT PART NO. PANEL THK. STANDOFF LENGTH 761101000 1/16 IN. (1,59) .295 (7,49) 761102000 3/32 IN. (2,38) .264 (6,71) NOTE: Additional nuts, screws and lockwashers available 761103000 1/8 IN. (3,18) .233 (5,92) separately, see Technical Data section of this catalog. J6 Actuator J1 Actuator PART NO. PART NO. 468002263 BLACK 468102263 BLACK Material: Nylon Material: Nylon Finish: Matte Finish: Matte NOTE: Other colors, custom actuator markings and legends available, consult Customer Service Center. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G www.ckswitches.com G–51