C&K A1161U2Y2NCNB

Switchlock A Series 4 & 5 Tumbler 1-4 Pole Switchlocks Features/Benefits Typical Applications • Multi-pole and multi-position • Security alarm systems • Shorting and non-shorting • Medical equipment contacts available • Computer servers • Low level and power capability • PCB mounting Models Available Specifications Materials CONTACT RATING: Q contact material: Switch-2.5 AMPS @ LOCK: Zinc alloy with stainless steel facing. 125 V AC; 350 mA @ 125 V DC (UL/CSA). Carry-5 AMPS KEYS: Two nickel plated brass keys with code number. continuous. See page L-33 for additional ratings. SWITCH HOUSING: Glass filled 6/6 nylon (UL 94V-0). ELECTRICAL LIFE: 15,000 make-and-break cycles at full load up to MOVABLE CONTACT: Q contact material: Coin silver, silver plated. 300,000 detent operations. See page L-38 for additional contact materials. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4 V DC, STATIONARY CONTACTS & TERMINALS: Q contact material: Brass, 100 mA, for both silver and gold plated contacts. silver plated. See page L-33 for additional contact materials. 9 INSULATION RESISTANCE: 10 Ω min. MOUNTING NUT: Zinc alloy. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. DRESS NUT: Brass, nickel plated. OPERATING TEMPERATURE: –30ºC to 85ºC. TERMINAL SEAL: Epoxy. INDEXING: 30º: 2-4 positions, 45º or 90º: 2-3 positions. NOTE: Any models supplied with Q or B contact material are RoHS compliant. STATIC RESISTANCE: Anti-static models exceed 20 KV DC static resistance @ sea level, lock body to terminals. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L–30 through L–33. For additional options not shown in catalog, consult Customer Service Center. Switch and lock Function A21613 DP, 30°, keypull pos. 1 A11413 SP, 90°, keypull pos. 1 Keying A31413 3P, 90º, keypull pos. 1 2 Two nickel plated brass keys A3141U 3P, 90°, keypull pos. 1 & 2 A11513 SP, 45°, keypull pos. 1 A31513 3P, 45°, keypull pos. 1 A3151U 3P, 45°, keypull pos. 1 & 3 Lock Type L A21582 DP, 45º, keypull pos. 1 A 4 Tumbler lock A11613 SP, 30°, keypull p05. 1 G 5 Tumbler lock with anti-static switch A1161U SP, 30°, keypull pos. 1 & 4 Y 4 Tumbler lock with anti-static switch A12112 SP, 45°, keypull p05. 1 Lock Finish A42112 4P, 45°, keypull pos. 1 2 Stainless steel facing 1 Nickel plated with removable dress nut Shorting/Non-Shorting 8 Gloss black facing N Non-shorting contacts S Shorting contacts Terminations Z Solder lug C PC Thru-hole Mounting/Lock Style N With nut R With removable dress nut Contact Material Q Silver Seal B Gold NONE No seal E Epoxy seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–29 A Series 4 & 5 Tumbler 1-4 Pole Switchlocks SWITCH AND LOCK FUNCTION CONNECTED TERMINALS NO. MODEL KEY PULL LOCK POS. 1 POS. 2 POS. 3 POS. 4 POLES NO. POSITIONS CONFIGURATION INDEXING POS. 1 SP A11413 * A-1 A-4 Position 1 3P A-1, B-5, C-9 A-4, B-8, C-12 A31413 2 90º POS. 1 3P A-1, B-5, C-9 A-4, B-8, C-12 Positions 1 & 2 A3141U 2 POS. 1 SP A11513 * A-1 A-2 A-4 2 Position 1 3P A-1, B-5, C-9 A-2, B-6, C-10 A-4, B-8, C-12 A31513 3 POS. 1 2 3P A-1, B-5, C-9 A-2, B-6, C-10 A-4, B-8, C-12 Positions 1 & 3 45º A3151U 3 POS. 1 3 DP A21582 A-4, C-10 A-5, C-11 A-2, C-8 Position 1 2 POS. 1 A11613 * 2 SP A-1 A-2 A-3 A-4 Position 1 3 DP A-1, C-7 A-2, C-8 A-3, C-9 A-4, C-10 A21613 4 30º POS. 1 2 SP A-1 A-2 A-3 A-4 Positions 1 & 4 A1161U * 3 4 POS. 1 SP A12112 * A-1 A-2 Position 1 45º 2 4P A-1, B-4, C-7, D-10 A-2, B-5, C-8, D-11 A42112 TERMINAL NUMBERS LEGEND = Detent Positions (30º , 45º or 90º ) = Key pull possible in these positions. = Stop Positions 4P MODEL 3P MODEL *NOTE: Switchlock models A114XX, A115XX, A116XX and A12112 with ‘C’ terminations have additional terminal no. 8 as switch support only. This terminal is SP MODEL (omit terminals B, C & D) not connected electrically inside switch. DP MODEL (omit terminals B & D) All models with all options when ordered with ‘Q’ contact material. Terminal numbers molded on housing bottom. L AX14 models not available with ‘S’ shorting contacts. AX161X SWITCH FUNCTION SHOWN Part number shown: A116132Y2NZNQ Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–30 Switchlock Switchlock A Series 4 & 5 Tumbler 1-4 Pole Switchlocks KEYING 1.635 (41,52) (4 TUMBLER) 1.733 (44,01) (5 TUMBLER) OPTION CODE NO. CODE NO. KEYING OPTIONS CODE ON KEY ON LOCK 2 NICKEL PLATED BRASS KEYS YES NO .798 2 (20,26) NOTE: All orders keyed alike, standard. For more than one key code, replacement keys, or other special features, consult Customer Service Center. .775 (19,68) Key part number: 115140126 NOTE: Key head shape subject to change without notice. LOCK TYPE A  4 TUMBLER LOCK WITH REMOVABLE DRESS NUT G  5 TUMBLER LOCK WITH ANTI-STATIC SWITCH Not available with AX23 models. Y  4 TUMBLER LOCK WITH ANTI-STATIC SWITCH AVAILABLE OPTION COMBINATIONS MOUNTING STYLES LOCK TYPES NR G • • A • Y NOTE: For available option combinations, see page L-38. LOCK FINISH L 2 STAINLESS STEEL 1  NICKEL 8  GLOSS BLACK AVAILABLE OPTION COMBINATIONS MOUNTING LOCK TYPES FINISH STYLES OPTIONS GA Y NR • • 1 •• • 2 ••• • 8 NOTE: For available option combinations, see page M-38. SHORTING/NON-SHORTING N  NON-SHORTING CONTACTS (break-before-make) S  SHORTING CONTACTS (make-before-break) Not available with AX14 models. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–31 A126 A Series 4 & 5 Tumbler 1-4 Pole Switchlocks TERMINATIONS PC MOUNTING Z  SOLDER LUG C  PC THRU-HOLE 4P MODEL 3P MODEL SP MODEL (omit terminals B, C ,D) DP MODEL (omit terminals B & D) MOUNTING/LOCK STYLE N  WITH NUT PANEL MOUNTING Nut part number: 937C00000 R  REMOVABLE DRESS NUT 1.036 (26,31) .270 (6,68) L PANEL MOUNTING TYPICAL INSTALLATION Install hex nut with enough clearance to allow for dress nut and panel. Place switch through cutout in rear of panel. Install and tighten dress nut by hand, then tighten hex nut. Always tighten assembly with back of panel hex nut to avoid damaging front of panel. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–32 Switchlock Switchlock A Series 4 & 5 Tumbler 1-4 Pole Switchlocks MOUNTING/LOCK STYLE Mounting Information (All Models) PANEL THICKNESS AVAILABLE OPTION COMBINATIONS MOUNTING A & Y LOCK TYPES G LOCK TYPES STYLES LOCK FINISHES LOCK TYPES MOUNTING .105 (2,67) max. .195 (4,95) max. N STYLES 12 8 GA Y .125 (3,18) max. .215 (5,46) max. R •• •• N •• • R Switch and Lock Assembly Instructions 1. Place lock assembly in mounting hole on panel, secure with mounting nut. 2. Align keying tab on switch assembly with keying slot on lock assembly. 3. Snap assemblies together. 4. Switch installation is permanent. Switch cannot be removed from lock after assembly. Attempting to separate switch and lock may cause damage to switchlock. CONTACT MATERIAL RoHS RoHS CONTACT AND OPTION COMPLIANT* COMPATIBLE* TERMINAL MATERIAL RATING CODE SWITCH-2.5 AMPS @ 125 V AC; 350 mA @ 125 V DC (UL/CSA). 2 Q YES YES SILVER POWER CARRY-5 AMPS CONTINUOUS. 1 B YES YES GOLD LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @ 20 V AC or DC MAX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible 1 MOVABLE CONTACT: Copper alloy, with gold plate over nickel plate. definitions and specifications. STATIONARY CONTACTS & TERMINALS: Brass, with gold plate over nickel plate. 2 MOVABLE CONTACT: Coin silver, silver plated. All models with all options when ordered with ‘Q’ contact material. STATIONARY CONTACTS & TERMINALS: Brass, silver plated (standard with all termination options). SEAL NONE  NO SEAL E  EPOXY SEAL L AVAILABLE HARDWARE Key Code: A126 Key Code: D001 4 TUMBLER 5 TUMBLER PART NO. (ONE KEY) PART NO. (ONE KEY) 115140126 115441001 Material: Brass Material: Brass Finish: Nickel plate Finish: Nickel plate Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–33