C&K A314132A1NZRQE
Specifications
Manufacturer
C&K
Manufacturers Part #
A314132A1NZRQE
Lead Time
7 Week Lead Time
Industry Aliases
A314132A1NZRQE
Sub-Category
KeyLock Switches
Factory Pack Quantity
1
Datasheet
Extracted Text
Switchlock A Series 4 & 5 Tumbler 1-4 Pole Switchlocks Features/Benefits Typical Applications • Multi-pole and multi-position • Security alarm systems • Shorting and non-shorting • Medical equipment contacts available • Computer servers • Low level and power capability • PCB mounting Models Available Specifications Materials CONTACT RATING: Q contact material: Switch-2.5 AMPS @ LOCK: Zinc alloy with stainless steel facing. 125 V AC; 350 mA @ 125 V DC (UL/CSA). Carry-5 AMPS KEYS: Two nickel plated brass keys with code number. continuous. See page L-33 for additional ratings. SWITCH HOUSING: Glass filled 6/6 nylon (UL 94V-0). ELECTRICAL LIFE: 15,000 make-and-break cycles at full load up to MOVABLE CONTACT: Q contact material: Coin silver, silver plated. 300,000 detent operations. See page L-38 for additional contact materials. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4 V DC, STATIONARY CONTACTS & TERMINALS: Q contact material: Brass, 100 mA, for both silver and gold plated contacts. silver plated. See page L-33 for additional contact materials. 9 INSULATION RESISTANCE: 10 Ω min. MOUNTING NUT: Zinc alloy. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. DRESS NUT: Brass, nickel plated. OPERATING TEMPERATURE: –30ºC to 85ºC. TERMINAL SEAL: Epoxy. INDEXING: 30º: 2-4 positions, 45º or 90º: 2-3 positions. NOTE: Any models supplied with Q or B contact material are RoHS compliant. STATIC RESISTANCE: Anti-static models exceed 20 KV DC static resistance @ sea level, lock body to terminals. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L–30 through L–33. For additional options not shown in catalog, consult Customer Service Center. Switch and lock Function A21613 DP, 30°, keypull pos. 1 A11413 SP, 90°, keypull pos. 1 Keying A31413 3P, 90º, keypull pos. 1 2 Two nickel plated brass keys A3141U 3P, 90°, keypull pos. 1 & 2 A11513 SP, 45°, keypull pos. 1 A31513 3P, 45°, keypull pos. 1 A3151U 3P, 45°, keypull pos. 1 & 3 Lock Type L A21582 DP, 45º, keypull pos. 1 A 4 Tumbler lock A11613 SP, 30°, keypull p05. 1 G 5 Tumbler lock with anti-static switch A1161U SP, 30°, keypull pos. 1 & 4 Y 4 Tumbler lock with anti-static switch A12112 SP, 45°, keypull p05. 1 Lock Finish A42112 4P, 45°, keypull pos. 1 2 Stainless steel facing 1 Nickel plated with removable dress nut Shorting/Non-Shorting 8 Gloss black facing N Non-shorting contacts S Shorting contacts Terminations Z Solder lug C PC Thru-hole Mounting/Lock Style N With nut R With removable dress nut Contact Material Q Silver Seal B Gold NONE No seal E Epoxy seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–29 A Series 4 & 5 Tumbler 1-4 Pole Switchlocks SWITCH AND LOCK FUNCTION CONNECTED TERMINALS NO. MODEL KEY PULL LOCK POS. 1 POS. 2 POS. 3 POS. 4 POLES NO. POSITIONS CONFIGURATION INDEXING POS. 1 SP A11413 * A-1 A-4 Position 1 3P A-1, B-5, C-9 A-4, B-8, C-12 A31413 2 90º POS. 1 3P A-1, B-5, C-9 A-4, B-8, C-12 Positions 1 & 2 A3141U 2 POS. 1 SP A11513 * A-1 A-2 A-4 2 Position 1 3P A-1, B-5, C-9 A-2, B-6, C-10 A-4, B-8, C-12 A31513 3 POS. 1 2 3P A-1, B-5, C-9 A-2, B-6, C-10 A-4, B-8, C-12 Positions 1 & 3 45º A3151U 3 POS. 1 3 DP A21582 A-4, C-10 A-5, C-11 A-2, C-8 Position 1 2 POS. 1 A11613 * 2 SP A-1 A-2 A-3 A-4 Position 1 3 DP A-1, C-7 A-2, C-8 A-3, C-9 A-4, C-10 A21613 4 30º POS. 1 2 SP A-1 A-2 A-3 A-4 Positions 1 & 4 A1161U * 3 4 POS. 1 SP A12112 * A-1 A-2 Position 1 45º 2 4P A-1, B-4, C-7, D-10 A-2, B-5, C-8, D-11 A42112 TERMINAL NUMBERS LEGEND = Detent Positions (30º , 45º or 90º ) = Key pull possible in these positions. = Stop Positions 4P MODEL 3P MODEL *NOTE: Switchlock models A114XX, A115XX, A116XX and A12112 with ‘C’ terminations have additional terminal no. 8 as switch support only. This terminal is SP MODEL (omit terminals B, C & D) not connected electrically inside switch. DP MODEL (omit terminals B & D) All models with all options when ordered with ‘Q’ contact material. Terminal numbers molded on housing bottom. L AX14 models not available with ‘S’ shorting contacts. AX161X SWITCH FUNCTION SHOWN Part number shown: A116132Y2NZNQ Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–30 Switchlock Switchlock A Series 4 & 5 Tumbler 1-4 Pole Switchlocks KEYING 1.635 (41,52) (4 TUMBLER) 1.733 (44,01) (5 TUMBLER) OPTION CODE NO. CODE NO. KEYING OPTIONS CODE ON KEY ON LOCK 2 NICKEL PLATED BRASS KEYS YES NO .798 2 (20,26) NOTE: All orders keyed alike, standard. For more than one key code, replacement keys, or other special features, consult Customer Service Center. .775 (19,68) Key part number: 115140126 NOTE: Key head shape subject to change without notice. LOCK TYPE A 4 TUMBLER LOCK WITH REMOVABLE DRESS NUT G 5 TUMBLER LOCK WITH ANTI-STATIC SWITCH Not available with AX23 models. Y 4 TUMBLER LOCK WITH ANTI-STATIC SWITCH AVAILABLE OPTION COMBINATIONS MOUNTING STYLES LOCK TYPES NR G • • A • Y NOTE: For available option combinations, see page L-38. LOCK FINISH L 2 STAINLESS STEEL 1 NICKEL 8 GLOSS BLACK AVAILABLE OPTION COMBINATIONS MOUNTING LOCK TYPES FINISH STYLES OPTIONS GA Y NR • • 1 •• • 2 ••• • 8 NOTE: For available option combinations, see page M-38. SHORTING/NON-SHORTING N NON-SHORTING CONTACTS (break-before-make) S SHORTING CONTACTS (make-before-break) Not available with AX14 models. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–31 A126 A Series 4 & 5 Tumbler 1-4 Pole Switchlocks TERMINATIONS PC MOUNTING Z SOLDER LUG C PC THRU-HOLE 4P MODEL 3P MODEL SP MODEL (omit terminals B, C ,D) DP MODEL (omit terminals B & D) MOUNTING/LOCK STYLE N WITH NUT PANEL MOUNTING Nut part number: 937C00000 R REMOVABLE DRESS NUT 1.036 (26,31) .270 (6,68) L PANEL MOUNTING TYPICAL INSTALLATION Install hex nut with enough clearance to allow for dress nut and panel. Place switch through cutout in rear of panel. Install and tighten dress nut by hand, then tighten hex nut. Always tighten assembly with back of panel hex nut to avoid damaging front of panel. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–32 Switchlock Switchlock A Series 4 & 5 Tumbler 1-4 Pole Switchlocks MOUNTING/LOCK STYLE Mounting Information (All Models) PANEL THICKNESS AVAILABLE OPTION COMBINATIONS MOUNTING A & Y LOCK TYPES G LOCK TYPES STYLES LOCK FINISHES LOCK TYPES MOUNTING .105 (2,67) max. .195 (4,95) max. N STYLES 12 8 GA Y .125 (3,18) max. .215 (5,46) max. R •• •• N •• • R Switch and Lock Assembly Instructions 1. Place lock assembly in mounting hole on panel, secure with mounting nut. 2. Align keying tab on switch assembly with keying slot on lock assembly. 3. Snap assemblies together. 4. Switch installation is permanent. Switch cannot be removed from lock after assembly. Attempting to separate switch and lock may cause damage to switchlock. CONTACT MATERIAL RoHS RoHS CONTACT AND OPTION COMPLIANT* COMPATIBLE* TERMINAL MATERIAL RATING CODE SWITCH-2.5 AMPS @ 125 V AC; 350 mA @ 125 V DC (UL/CSA). 2 Q YES YES SILVER POWER CARRY-5 AMPS CONTINUOUS. 1 B YES YES GOLD LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @ 20 V AC or DC MAX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible 1 MOVABLE CONTACT: Copper alloy, with gold plate over nickel plate. definitions and specifications. STATIONARY CONTACTS & TERMINALS: Brass, with gold plate over nickel plate. 2 MOVABLE CONTACT: Coin silver, silver plated. All models with all options when ordered with ‘Q’ contact material. STATIONARY CONTACTS & TERMINALS: Brass, silver plated (standard with all termination options). SEAL NONE NO SEAL E EPOXY SEAL L AVAILABLE HARDWARE Key Code: A126 Key Code: D001 4 TUMBLER 5 TUMBLER PART NO. (ONE KEY) PART NO. (ONE KEY) 115140126 115441001 Material: Brass Material: Brass Finish: Nickel plate Finish: Nickel plate Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–33
Frequently asked questions
How does Electronics Finder differ from its competitors?
![chervon down](/assets/images/chervon-down.png)
Is there a warranty for the A314132A1NZRQE?
![chervon down](/assets/images/chervon-down.png)
Which carrier will Electronics Finder use to ship my parts?
![chervon down](/assets/images/chervon-down.png)
Can I buy parts from Electronics Finder if I am outside the USA?
![chervon down](/assets/images/chervon-down.png)
Which payment methods does Electronics Finder accept?
![chervon down](/assets/images/chervon-down.png)
Why buy from GID?
![quality](/assets/images/quality.png)
Quality
We are industry veterans who take pride in our work
![protection](/assets/images/protection.png)
Protection
Avoid the dangers of risky trading in the gray market
![access](/assets/images/access.png)
Access
Our network of suppliers is ready and at your disposal
![savings](/assets/images/savings.png)
Savings
Maintain legacy systems to prevent costly downtime
![speed](/assets/images/speed.png)
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods