CCM02 MK2 Series Features Typical Applications • Transaction • Operating life 500,000 cycles • Identification • Insertion force 40N • POS • EMV • PCI & PCI ready • Card detection sealed switch Mechanical Contact Electrical Data Number of Contacts 8 Insulation resistance 1,000 MΩ min Mechanical life 500,000 cycles min Resistance 100 mΩmax Card insertion force 10N to 40N Current rating 10 μA min / 1 A max Card extraction force 1N min / 10N max Dielectric strength 750 Vrms min Contact force 0,2N / 0,50N max Card detection switch 0,8 N max for actuation (end travel switch actuation force actuates when card is 0,9mm Switch Electrical Data from card stop) Card detection switch Normally open 1,8 N max for complete depression Contact resistance 100 mΩ max 2 Vibration Frequency 10 to 500 Hz. Acceleration 50m/s Dielectric strength 250 Vrms min Duration 6 hours - amplitude 0,35mm Current rating 1 mA min / 10 mA max Max elect. discontinuity 1μs Maximum power 0.2 VA 2 Shock Peak value 500 m/s – Duration 11 ms 3 shocks in each direction of each axis Environmental Data Operating temperature -40°C to +85°C Packaging Damp heat IEC 512 test number 11c (10 days) Tray 30 parts / Cartons 300 parts Salt mist IEC 512 test number 11f (96 hours) Reel 120 parts Card detection switch Sealed against dust RoHS compliant Soldering Compatible with lead free reflow soldering process For version with security cover, please contact Customer Service for soldering recommendations. PCI Features Total Height Designation Termination Contact Type I/O Protect Security Cover Dimension PCB version (mm) CCM02-2503LFT THT landing 6,25 38,5 X 55,6 4 clips CCM02-2504LFT SMT landing 6,25 38,5 X 55,6 4 clips CCM02-F503LFT THT friction 6,25 38,5 X 55,6 4 clips CCM02-F504LFT SMT friction 6,25 38,5 X 55,6 4 clips CCM02-F844LFT SMT friction Yes Yes 6,6 40,5 X 58 4 metal pegs Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 12 Full Size CCM02 MK2 Series PCI: I/O Protect Definition Special accessory in order to avoid and detect frontal access to data contact. It is electrically connected to the PCB through spring finger contacts. Process It must be in open position during the reflow soldering of the connector and has to be locked in closed position after soldering. I/O Protect locking tool C&K is proposing a manual tool to lock the I/O protect accessory after soldering. Ordering code: C-CM02-E50 PCI: Security Cover Definition It is a multilayer cover placed over the connector to avoid and detect data contact access, especially from the top. It is connected to the PCB through 6 SMT terminals that are soldered at the same time as the other smart card terminals. Process Please contact your Sales Representative for advice and recommendations about soldering this version. Specifications and dimensions subject to change www.ck-components.com 13 Full Size F503T XX XX CCM02 MK2 Series CCM02-2503 LFT / CCM02-F503 LFT 55,6±0,2 DETAIL A 0.65 Scale 5 Embossed Channel 19,12 5x 2,54 10x 4 Snap 4x 0,7 0,3 A B Feet ø 0,2 A B 2,9±0,2 52 A A-A 5,75 Designation & Date-Code area SEE DETAIL A "CCM02" marking is optional Card stop A F503T XX XX A Card insertion 4,15±0,3 Card entry direction RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline SW SW C1 C4 C2 C3 10 Card end travel switch terminals 0 0 (50) (38,5) 14 C5 C6 C7 C8 20 +0,1 10x 1 ø +0,1 1,8 0 3,2 (4x) ø ø 0,1 0 ø 0,1 Contact location according to ISO/IEC 7816-2 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 14 Full Size 1,6 PCB Thickness 6,25 38,5 0 19,12 21,66 24,2 26,74 29,28 31,82 3,81 3,81 12,7 12,7 3,2 52 0,95 3,15 4,3±0,2 B 14 10 (3,2) 12,7 12,7 3,2 7,7±0,3 1±0,25 4 20 15,7 (55,6) CCM02 MK2 Series CCM02-2504 LFT / CCM02-F504 LFT Contact location according to ISO 7816-2 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 15 Full Size F844T xx xx CCM02 MK2 Series CCM02-F844A LFT / CCM02-F844B LFT 0,2±0,1 DETAIL B 58±0,3 Scale 5 0,7 2,05 Embossed Channel (14x) 1 0,3 A 0,2±0,15 18,87 (5x) 2,54 metal peg (4x) (4x) Ø 1,62 ± 0,05 51,5 Ø 0.2 A B A-A A Card stop SEE DETAIL B 6 A Labelling : Designation & Date-Code area F844T xx xx Contacts security (closed position) A 3,6±0,3 Card e Card entr ntry y 45º RECOMMENDED PC BOARD LAYOUT C5 C6 C7 C8 (Component side) Contact foot area P4 P2 me mettalli allized zed h holes oles Card end travel 11,3 \Piracy P1 P3 38,8 (4 (4x) x) Ø 1,9 switch \ switch terminals Ø 0,1 A SW SW C1 C2 C3 C4 14 Scale 1 1,27 Ca Card rd i in nse sert rtio ion n P2 P4 0 dir directi ection on P3 1,27 P1 (6x) 1,5 0,05 C5 C6 C7 C8 Protection cover terminals Plastic outline (50) (40,5) 20 1,3 0,2 Contact location according to ISO/IEC 7816-2 Please don't apply any solder paste on these 4 pads Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 16 Full Size 3,81 0 0 (6x) 1,3 10,5 0,05 9,7 3,1 1,7 3,24 11,45 12,65 1,5 1,5 18,87 21,41 23,95 26,49 29,03 3,81 3,81 31,57 2 38 37,2 51,5 0,95 0 1,6 -0,1 4,3±0,2 B 10 14 +0,4 3,2 -0,2 26,35±0,3 0,8 0,8 20 15,7 16,9 1±0,25 (closed position) (58)