CCM045454LFT - C&K - Electronics Finder

Description

Conn SIM Card M 8 POS 2.54mm Solder RA SMD Reel
CCM045454LFT

Part Number

CCM045454LFT

Price

Request Quote

Manufacturer

C&K

Lead Time

Request Quote

Category

Connectors » Connector Memory Card

Specifications

Manufacturer

C&K

Manufacturers Part #

CCM045454LFT

Lead Time

5 Week Lead Time

Industry Aliases

CCM04-5454LFT

Sub-Category

Memory Card Connectors

Selling Alternatives

CCM04-1316

Packaging

Reel

Factory Pack Quantity

5000

Datasheet

ccm04mk4.pdf

3846 KiB

Download

Extracted Text

CCM04 MK4 Series Features Typical Applications • Transaction • ID1 full size card acceptance • POS • Card detection sealed switch • Identification • Compatible with pick and place and lead free soldering Mechanical Contact Electrical Data Number of contacts 6 or 8 Insulation resistance 1000 MΩ min Mechanical life 50,000 cycles Contact resistance max 100 mΩ max Card insertion force 10N max Switching current 10 μA min / 1 A max Card extraction force 1N min / 10N max Dielectric strength 750 Vrms min Contact force 0,4N to 0,7N Card detection switch 0,8 N max for actuation (end travel switch actuation force actuates when card is 0,9mm Switch Electrical Data from card stop) Card detection switch Normally open 1,8 N max for complete depression 2 Vibration Frequency 10 to 500 Hz. Acceleration 50m/s Rc card detection switch 100 mΩ max Dielectric strength 250 Vrms min Duration 6 hours - amplitude 0,35mm 2 Switch current rating 1 mA min / 10 mA max Shock Peak value 500 m/s – Duration 11 ms Maximum switch power 0.2 VA 3 shocks in each direction of each axis Max elect. discontinuity 1μs Environmental Data Packaging Operating temperature -40°C to +85°C Salt mist IEC 512 test number 11f (96 hours) See table below Damp heat IEC 512 test number 11c (10 days) Card detection switch Sealed against dust RoHS compliant Soldering Process Compatible with lead free SMT reﬂow soldering process Designation Housing Type # of Contacts Contact Force Total Height (mm) Total Dim. (mm) Packaging CCM04-5427LFT standard 8 0,4N to 0,7N 2,65 18,75 X 25 reels of 1,000 pcs CCM04-5436LFT standard 8 0,4N to 0,7N 0,90 18,75 X 26,9 reels of 1,000 pcs CCM04-5468LFT stand-off 8 0,4N to 0,7N 3,5 18,75 X 24 reels of 1,000 pcs CCM04-5454LFT standard 8 0,4N to 0,7N 0,90 18,75 X 26,9 reels of 1,000 pcs CCM04-5455LFT standard 8 0,4N to 0,7N 0,90 18,75 X 26,9 reels of 1,000 pcs Dimensions are shown in mm Speciﬁcations and dimensions subject to change www.ck-components.com 17 Full Size CCM04 MK4 Series CCM04-5427 LFT Mated condition 3,81 3,81 DETAIL A 40˚0' Scale 10 2 11,15 0,85 SEE DETAIL A 2 16,6 0,8 15,15±0,3 9,5±0,3 (15,15) 15,6 B +0,05 0 1,9 0,75±0,15 -0 12,9 -0,1 8 Card stop 7 1,1±0,05 0,9±0,25 6 7,5 1,75 A 45˚0' A 4,4 Pick and place area ø 3,3 1,5 x 45˚ 11,8 +0,10 0,75 -0,05 7,8 15,45 0,75±0,05 0,8 RECOMMENDED PC BOARD LAYOUT (Component side) 1,3 13,2 9,2 1,7 1,3 C5 C1 C6 C2 C3 C7 C8 C4 (24,65) C SW (25) Stand-off area SW Pad Contact foot area Switch contact foot area 3,81 3,81 2,79 0,8 x 0,7 0,85 x 0,7 15,15 9,5 Plastic outline Contact location according to ISO/IEC 7816-2 Dimensions are shown in mm Speciﬁcations and dimensions subject to change www.ck-components.com 18 R0,7 Full Size 2,65±0,05 11,55 A 0,25 ± 0,05 x45˚ 4 3 2,54 2,54 2,54 XXXX 0,5 8x 0,7 0,3 A 1,1±0,15 8x 1,3 0,2 2x 0,7 0,3 A 7,65 18,75 4 3 2,54 2,54 2,54 (2,16) (1,97) 2x 1,1 2 1,27 0,2 ø 1,2 0,1 A B (0,75) 0,6 Top card level recommended (11,55) R0,5 max 8x CCM04 MK4 Series CCM04-5436 LFT A-A DETAIL A Mated condition Scale 10 3,81 3,81 40˚0' 2 2 11,15 1,5 1,4 SEE DETAIL A 18,4±0,3 8,5±0,3 (18,4) 15,6 B 0 +0,05 12,9 -0,1 1,9 0,75±0,15 -0 8 1,1±0,05 Card stop 7 0,9±0,25 6 7,5 A Pick and place 45˚0' area ø 3.3 A 4,4 1,5 x 45˚ 11,8 +0,10 0,75 7,8 15,45 -0,05 0,75±0,05 0,8 RECOMMENDED PC BOARD LAYOUT (Component side) +0,1 24,15 0 1,7 16,4 8,35 10x +0,1 15,8 0 C5 C1 C2 C6 C7 C3 C8 C4 (24) SW (26,9) SW +0,1 11,4 3,6 x 45˚ 0 Dimensions are shown in mm Speciﬁcations and dimensions subject to change www.ck-components.com 19 R0,2 min R0,7 +0,03 +0,10 0,15 0,75 11,55 0 -0,04 A +0,1 18,95 0 4 3 3x 2,54 0,25 ± 0,05 x45˚ +0,1 11,75 0 A XXXX +0,03 0,97 -0,07 1,27 +0,1 7,95 0 1,1 1,3 0,2 A 2x 8x 0,5 8x 0,7 0,3 A 1,1±0,15 2x 0,7 0,3 A 7,65 18,75 (0,75) 4 3 2,54 2,54 2,54 (2,16) (1,97) (18,75) 1,27 0,6 Top card level recommended Full Size CCM04 MK4 Series CCM04-5468 LFT Mated condition SEE DETAIL A 3,81 3,81 40˚ DETAIL A SCALE 10 2 0,85 0,8 11,15 15,15±0,3 9,5±0,3 15,6 B 0 12,9 -0,1 0,75±0.15 8 Card stop 7 1,1±0,05 0,9±0,25 6 7,5 A 45˚ 4,4 A Pick and place area ø 3,3 1,5 x 45˚ 11,8 +0,10 0,75 -0,15 7,8 15,45 0,75±0,05 0,8 RECOMMENDED PC BOARD LAYOUT (Component side) 1,3 13,2 9,2 1,7 Stand-off area 6x 1,3 Contact foot area 0,8 x 0,7 C5 C1 C6 C2 C3 C7 (24) C8 C4 SW SW Pad 3,81 3,81 2,79 Switch contact foot area 0,85 x 0,7 Plastic outline Contact location according to 15,15 9,5 ISO/IEC 7816-2 Dimensions are shown in mm Speciﬁcations and dimensions subject to change www.ck-components.com 20 R0,7 Full Size 11,55 A 0,25 ± 0,05 x45˚ 4 3 2,54 2,54 2,54 1,27 XXXX 0,5 8x 0,7 0,3 A 1,1±0,15 8x 1,3 0,2 2x 0,7 0,3 A 7,65 3,5±0,08 2x 18,75 1,1 0,2 4 3 2,54 2,54 2,54 (2,16) (1,97) 2x 1,27 0 0,07 -0,1 0,6 Top card level recommended (11,55) (18,75) R1 min R0,5 max 8x CCM04 MK4 Series CCM04-5454 LFT DETAIL A Mated condition Scale 10 3,81 3,81 40˚ 2 2 11,15 1,5 1,4 SEE DETAIL A 18,4±0,3 8,5±0,3 (18,4) 15,6 B 0 12,9 -0,1 2 ±0.05 0,75±0,15 8 1,1±0,05 Card stop 7 0,9±0,25 6 7,5 A 45˚ A 4,4 1,5 x 45˚ 11,8 +0,10 0,75 7,8 15,45 -0,05 0,75±0,05 0,8 RECOMMENDED PC BOARD LAYOUT (Component side) Scale 2,5 2.8±0.05 x 45˚ 12.6±0.05 SW SW C4 C8 C7 C3 C6 C2 Pick and place area ø 8 max C5 C1 13.2±0.05 1,7 16,4 8,35 (24) 10x +0,1 22,9 0 (26,9) Dimensions are shown in mm Speciﬁcations and dimensions subject to change www.ck-components.com 21 R0,7 +0,03 +0,10 0,15 0,75 11,55 0 -0,04 A +0,1 18,35 0 3x 2,54 3 4 0,25 ± 0,05 x45˚ +0,1 11,75 0 A XXXX +0,03 0,97 -0,07 1,27 0,5 1,3 1,1 8x 0,2 A 0,7 8x 2x +0,1 0,3 A 7,35 0 1,1±0,15 2x 0,7 0,3 A 7,65 18,75 (0,75) 4 3 2,54 2,54 2,54 (2,16) (1,97) 1,27 0,6 (18,75) Top card level recommended Full Size R1 min R0,5 max 8x CCM04 MK4 Series CCM04-5455 LFT Mated condition 3,81 3,81 40˚ 2 2 1,4 11,15 1,5 SEE DETAIL A (18,4) 18,4±0,3 8,5±0,3 15,6 B 0 2 ±0.05 0,75±0,15 12,9 -0,1 8 1,1±0.05 Card stop 7 0,9±0,25 6 7,5 A 45˚ A 4,4 1,5 x 45˚ 11,8 +0,10 0,75 7,8 15,45 -0,05 0,75±0,05 0,8 RECOMMENDED PC BOARD LAYOUT (Component side) Scale 2,5 2.8±0.05 x 45˚ 12.6±0.05 SW SW C8 C4 Pick and place area ø 8 max C7 C3 C6 C2 C5 C1 (24) 13.2±0.05 (26,9) 1,7 16,4 8,35 10x +0,1 22,9 0 Dimensions are shown in mm Speciﬁcations and dimensions subject to change www.ck-components.com 22 R0,7 Full Size +0,03 +0,10 0,15 0,75 11,55 0 -0,04 A +0,1 18,35 0 0,25 ± 0,05 x45˚ 3x 2,54 3 4 +0,1 11,75 0 A XXXX +0,03 0,97 -0,07 1,27 0,5 2,93 8x 0,7 1,3 1,1 0,3 A 0,2 A 3,05 8x 2x +0,1 7,35 0 1,1±0,15 2x 0,7 0,3 A 7,65 18,75 (0,75) 4 3 2,54 2,54 2,54 (2,16) (1,97) 1,27 0,6 (18,75) Top card level recommended

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products