C&K E207SD1ABE

E Series Sealed Miniature Toggle Switches Features/Benefits Typical Applications • Sealed against solder and cleaning • Telecommunications process contaminants • Instrumentation • UL 94V-0 Nylon case and bushing • Medical equipment • Multi-positions • ESD protection available • RoHS compliant models available Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat 20 V AC or DC max. Q contact material: E1XX & E2XX stabilized (UL 94V-0). F1 conductive bushing option is MODELS: 7.5 AMPS @ 125 V AC or 28 V DC; impregnated with carbon fibers. 3 AMPS @ 250 V AC. E3XX MODELS: 5 AMPS @ ACTUATOR: Brass, chrome plated with internal o-ring seal standard. 125 V AC or 28 V DC; 2 AMPS @ 250 V AC. See page SWITCH SUPPORT: Brass or steel, matte-tin plated. F-29 for additional ratings. SWITCH SUPPORT RETAINER: Stainless steel. ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break CONTACTS & TERMINALS: B contact material: Copper alloy, cycles at full load. E3XX models: 30,000 cycles. with gold plate over nickel plate. Q contact material: Copper alloy, CONTACT RESISTANCE: Below 10 mΩ typ. initial @ silver plated. See page F-29 for additional contact materials. 2-4 V DC, 100 mA, for both silver and gold plated contacts. TERMINAL SEAL: Epoxy. 9 INSULATION RESISTANCE: 10 Ω min. HARDWARE: Nut & Locking ring: Brass, nickel plated. ELECTROSTATIC DISCHARGE (ESD) OPTION: F1 conductive Lockwasher: Steel, nickel plated. bushing only. Dissipates up to 20,000 V DC from actuator to ground. NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant and compatible. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. NOTE: Specifications and materials listed above are for switches with standard options. OPERATING TEMPERATURE: –30ºC to 85ºC. For information on specific and custom switches, consult Customer Service Center. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). DEGREE OF PROTECTION: IP57; Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F–23 thru F–29. For additional options not shown in catalog, consult our Customer Service Center. All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. Switch Function E101 SP, On-None-On Actuator M .300” high E103 SP, On-Off-On E105 SP, Mom.-Off-Mom. S .500” high E107 SP, On-Off-Mom. L3 Plastic, .940” high E108 SP, On-None-Mom. Bushing E201 DP, On-None-On D1 .250” high Terminations E203 DP, On-Off-On *F1 Conductive, A Right angle, PC thru-hole Contact Material E205 DP, Mom.-Off-Mom. .250” high AV2 Vertical right angle, PC thru-hole B Gold E207 DP, On-Off-Mom. D9 .280” high C PC Thru-hole P Gold, matte-tin E208 DP, On-None-Mom. **Y Threaded, .350” high V3 .460” high, V-bracket Q Silver E211 DP, On-On-On Z Solder lug S Silver, matte-tin E213 DP, On-On-Mom. A3 Right angle, PC thru-hole G Gold over silver E215 DP, Mom.-On-Mom. AV3 Vertical right angle, PC thru-hole R Gold over silver, matte-tin **E301 3P, On-None-On V6 .460” high, V-bracket V9 1.150” high, V-bracket Seal F V31 .460” high, snap-in V-bracket * F1 available with SP and DP E Epoxy V61 .460” high, snap-in V-bracket versions only, please see W .750” long, wire wrap page F-19 Z3 Quick connect ** Y threaded bushing available for 1 & 2 pole only Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–22 Toggle Toggle E Series Sealed Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 NO. C&K marking on opposite side C&K marking on opposite side POLES MODEL NO. SCHEMATIC E101 ON NONEON 2-3 N/A 2-1 E103 ON OFF ON SP E105 MOM. OFF MOM. 2-3 OPEN 2-1 E107 ON OFF MOM. SPDT E108 ON NONE MOM. 2-3 N/A 2-1 SPDT Terminal Numbers For Reference Only Part number shown: E101SD1CBE E201 ON NONEON 2-3,5-6 N/A 2-1,5-4 E203 ON OFF ON E205 MOM. OFF MOM. 2-3,5-6 OPEN 2-1,5-4 E207 ON OFF MOM. DP E208 ON NONE MOM. 2-3,5-6 N/A 2-1,5-4 E211 ** ON ON ON E213** ON ON MOM. 2-3,5-6 2-3,5-4 2-1,5-4 DPDT E215** MOM. ON MOM. DPDT Terminal Numbers For Reference Only Part number shown: E201SD1CBE MOM. = Momentary ** Wiring for 3-way switch, see Section N. All models with all options when ordered with G,R, Q or S contact material except with F1 conductive bushing. F Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–23 E Series Sealed Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 NO. MODEL C&K marking on opposite side C&K marking on opposite side POLES NO. SCHEMATIC 3P ON NONE ON 2-3,5-6,8-9 N/A 2-1,5-4,8-7 E301 3PDT 3PDT Terminal Nos. For Reference Only Part number shown: E301SD1CBE MOM. = Momentary ** Wiring for 3-way switch, see Section N. All models with all options when ordered with G, R, Q or S contact material except with F1 conductive bushing. ACTUATOR COLOR ACTUATOR ACTUATOR M   .300” HIGH S   .500” HIGH L3  PLASTIC, .940” HIGH * * Gloss plastic OPTION * L3 ACTUATOR COLOR CODE 2 BLACK Chrome finish Other colors available, consult Customer Standard when ordered with Standard when ordered with Service Center. No color choice required A, A3, AV2, AV3, V2-V61 terminations. C, Z, Z3, W & W4 terminations. for S & M actuators. Finish: Chrome. Finish: Chrome * Actuators shown with standard D1 bushing. Subtract .030 (0,76) for D9 bushing. Subtract .100 (2,54) for Y bushing. BUSHING D1   .250” HIGH, UNTHREADED D9  .280” HIGH, UNTHREADED Y  THREADED, INSULATED, .350” HIGH WITH KEYWAY F1  ESD CONDUCTIVE BUSHING, .250” HIGH, UNTHREADED F1 bushing is not UL 1/4-40 UNS-2A approved PANEL MOUNTING F ESD protection depends on proper grounding of switch E3XX models not available with D9 bushing. Available only with C, Z, Z3, & W terminations. support bracket. F1 conductive bushing option is Available for 1&2 pole only. impregnated with carbon fibers; dissipates electrostatic Hardware: One dress nut part number 299D01201, discharge (ESD) up to 20,000 V from actuator to ground. one hex nut part number 540400201 and lockwasher NOTE: Internal o-ring actuator seal standard for part number 700303202 supplied standard. all bushing options. Available with M & S actuator options and A, A3, AV2, Will withstand 4 in.-lbs. of torque with no distortion. AV3, V3-V61 termination options. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–24 Toggle Toggle E Series Sealed Miniature Toggle Switches TERMINATIONS Z  SOLDER LUG C  PC THRU-HOLE PC MOUNTING Not available with F1 conductive bushing or P, R or S contact material. Not available with F1 conductive bushing. SPDT thru 3PDT SPDT thru 3PDT Z3  QUICK CONNECT Not available with F1 conductive bushing or P, R or S contact material. Mating quick connector available; order part number 530100000, page F-16. SPDT thru 3PDT A  RIGHT ANGLE, PC THRU-HOLE Actuator Shown In Pos. 1 SECTION A-A E101MD1ABE Terminal Nos. For Reference Only Horizontal Actuation A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE PC MOUNTING SPDT Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. A  RIGHT ANGLE, PC THRU-HOLE Actuator Shown In Pos. 1 SECTION A-A E201MD1ABE Terminal Nos. For Reference Only A3  RIGHT ANGLE, SNAP-IN, PC THRU-HOLE Horizontal Actuation PC MOUNTING DPDT F Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–25 E Series Sealed Miniature Toggle Switches TERMINATIONS A  RIGHT ANGLE, PC THRU-HOLE PC MOUNTING E301MD1ABE Horizontal Actuation Actuator Shown In Pos. 1 SECTION A-A 3PDT Terminal Nos. For Reference Only Not available with D9 & Y bushings. Terminal bend radii and lead-in manufacturing option. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH E101MD1AV2BE Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A SPDT PC MOUNTING AV3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH E201MD1AV2BE SECTION A-A Vertical Actuation Actuator Shown In Pos. 1 PC MOUNTING DPDT A3  VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150” PITCH F Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–26 Toggle Toggle E Series Sealed Miniature Toggle Switches TERMINATIONS AV2  VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH E301MD1AV2BE Vertical Actuation 3PDT SECTION A-A Actuator Shown In Pos. 1 PC MOUNTING AV3   VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE .150” PITCH Not available with D9 & Y bushings. Terminal bend radii and lead-in manufacturing option. V6  VERTICAL MOUNT, V-BRACKET V61  VERTICAL MOUNT, V-BRACKET, SNAP-IN PC MOUNTING E101MD1__BE SPDT OPTION CODE DIM ‘A’ SNAP-IN V6, V61 .460 (11,68) Actuator Shown In Pos. 1 Not available with Y bushing. V6  VERTICAL MOUNT, V-BRACKET PC MOUNTING V61  VERTICAL MOUNT, V-BRACKET, SNAP-IN E201MD1__BE DPDT F OPTION SNAP-IN CODE DIM ‘A’ V6, V61 .460 (11,68) Actuator Shown In Pos. 1 Not available with Y bushing. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–27 E Series Sealed Miniature Toggle Switches TERMINATIONS V3, V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING V31  VERTICAL MOUNT, V-BRACKET, SNAP-IN OPTION CODE DIM ‘A’ SNAP-IN V3, V31 .460 (11,68) E101MD1__BE V9 1.150 (29,21) SPDT Actuator Shown In Pos. 1 Not available with Y bushing. V3, V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING V31  VERTICAL MOUNT, V-BRACKET, SNAP-IN OPTION CODE DIM ‘A’ SNAP-IN V3, V31 .460 (11,68) E201MD1__BE V9 1.150 (29,21) DPDT Actuator Shown In Pos. 1 Not available with Y bushing. V9  VERTICAL MOUNT, V-BRACKET PC MOUNTING OPTION CODE DIM ‘A’ E301MD1__BE SNAP-IN 3PDT V9 1.150 (29,21) F Actuator Shown In Pos. 1 Not available with D9 & Y bushings. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–28 Toggle Toggle E Series Sealed Miniature Toggle Switches CONTACT MATERIAL OPTION CONTACT TERMINAL CODE MATERIAL PLATING RATINGS B 1 GOLD 1 LOW LEVEL/ GOLD 0.4 VA MAX. @ 20 V AC OR DC MAX. 6 MATTE-TIN DRY CIRCUIT P 5 Q SILVER E1XX & E2XX MODELS: 7.5 AMPS @ 125 V AC OR 28 V DC; 4,5 SILVER 3 AMPS @ 250 V AC. 6 POWER MATTE-TIN E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. S G 3 E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR GOLD LOW LEVEL/DRY GOLD OVER 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC. 6 2,3 MATTE-TIN CIRCUIT OR POWER SILVER DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @ R 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. All models with all options when ordered with S, R, G, or Q contact material except 2 END CONTACTS: Coin silver, with gold plate over nickel plate. with F1 conductive bushing. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate B contact material standard with all terminations. over nickel plate. P, S & R contact materials not available with Z & Z3 terminations. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver plate. Or copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. F Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–29