Slide L Series Miniature Slide Switches Features/Benefits Typical Applications • Positive detent • Communications equipment • Enclosed housing • Lighting devices • Maintained and momentary functions • PC and panel mounting • RoHS compliant Models Available Specifications Materials CONTACT RATING: Q contact material (LX0X, LX1X Models): 4 AMPS HOUSING: 6/6 nylon (UL94V-2), black. I @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ ACTUATOR: 6/6 nylon (UL94V-2), black. 125 V DC (UL). See page I-23 for additional ratings. ‘13’ actuator, natural (standard). ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACTS: Q contact material: Copper, silver plated. See page CONTACT RESISTANCE: Below 10 m Ω typ. initial I-23 for additional contact materials. @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. TERMINALS: Q contact material: Copper, silver plated. See page 9 INSULATION RESISTANCE: 10 Ω min. I-23 for additional contact materials. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. CONTACT SPRING: Music wire or stainless steel. OPERATING TEMPERATURE: -30ºC to +65ºC TERMINAL SEAL: Epoxy. STORAGE TEMPERATURE: -30ºC to +85ºC NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I-20 through I-24. For additional options not shown in catalog, consult Customer Service Center. Switch Function L202 DPDT Actuator L203 DP3T 01 .200” high L101 SPST 02 .335” high L102 SPDT 03 .375” high L103 SP3T 05 .312” high L104 SP4T 11 .100” high L112 SPDT, mom. 12 Screwdriver slot L113 SP3T, mom. to one end 13 Plunger without cap L123 SP3T, mom. to both ends 14 Plunger with .200” dia. cap L201 DPST 15 Plunger with .310” dia. cap L204 DP4T 17 Plunger with .458” dia. cap L212 DPDT, mom. 19 Plunger with .590” dia. cap Detent 1 With detent 2 Without detent Mounting Style MS PC Thru-hole MA Right angle, PC thru-hole Terminations ML Right angle, PC thru-hole 02 PC Thru-hole MV Right angle, PC thru-hole 01 Solder lug with notch SS Panel with mounting ears Contact Material 03 Solder lug with hole TS Panel with integral mounting ears 04 PC Thru-hole B Gold Q Silver 10 PC Thru-hole G Gold over silver 06 Wire wrap 12 PC Thru-hole Seal NONE No seal E Epoxy seal Cap Color 2 Black NONE No cap Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 May 2018 www.ckswitches.com I–19 L Series Miniature Slide Switches SWITCH AND LOCK FUNCTION AVAILABLE AVAILABLE NO. MODEL MOUNTING NO. MODEL SWITCH MOUNTING POLES NO. SWITCH FUNCTION SCHEMATIC STYLES POLES NO. FUNCTION SCHEMATIC STYLES L101 SPST ML, MS, SS L201 DPST MA, MS, SS L102 SPDT ML, MS, SS 1 2 3 L202 DPDT MA, MS, SS L112 SPDT-MOM. ML, MS, MV, SS SP L103 SP3T MA, MS, TS DP L212 DPDT-MOM. MV L113 SP3T-MOM. to one end MA, MS, TS I L123 SP3T-MOM. to both ends MA, MS, TS L203 DP3T MS, TS L104 SP4T MS L204 DP4T MS NOTE: and MOM. in table indicates momentary action. All models with all options when ordered with ‘G’ or ‘Q’ contact material. Contacts make on side actuator thrown. CAP COLOR ACTUATOR ACTUATOR ACTUATOR OPTIONS FOR ‘MS, MA, ML, SS, & TS’ MOUNTING STYLES 01  .200” HIGH 02  .335” HIGH 03  .375” HIGH 05  .312” HIGH 11  .100” HIGH 12 SCREWDRIVER SLOT .200 5,08 NOTE: No actuator color option code is required. Standard actuator color is black, other colors and heights available, consult Customer Service Center. See pages I-20 and I-22 for available mounting styles. ACTUATOR OPTIONS FOR ‘MV’ MOUNTING STYLE 13  PLUNGER WITHOUT CAP 14  PLUNGER WITH CAP 15  PLUNGER WITH CAP Cap part number 7089 Cap part number 8018 OPTION ACTUATOR CAP CODE COLORS 17  PLUNGER WITH CAP 19  PLUNGER WITH CAP 2 BLACK NONE 01-13 ACTUATORS Other colors available, consult Customer Service Center. Cap part number 7982 Cap part number 8940 ACTUATOR CAPS SPLASH CAPS Caps supplied are not installed standard. To order actuator options ‘14 thru 19,’ select New protective splash caps for PC mounted slide desired cap color from chart and place option code in last box of ordering format. Leave box switches are available separately and reusable. empty for all other actuator options. Caps may also be ordered separately and user installed, They provide splash protection during soldering and see pages I-23 and I-24. Specify the four digit part number and desired cap color. For cleaning processes. To order specify correct part switches without caps, order ‘13’ or ‘23’ actuator option. Cap finish: gloss (excluding square number, see page I-24. cap part number 7982, finish: matte). Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 25 May 2018 www.ckswitches.com I–20 Slide Slide L Series Miniature Slide Switches DETENT 1  WITH DETENT Standard with all maintained models: L101, L102, L103, L104, L113, L201, L202, L203 and L204. 2  WITHOUT DETENT Standard with all momentary models: L112, L123, and L212. MOUNTING STYLE MS  PC THRU-HOLE, 2 POSITION MODELS .288 .200 (7,32) (5,08) .425 .225 TYP AVAILABLE WITH: .050 X .020 TYP (10,79) (5,71) .225 TYP (1,27) X (0,51) .150 TRAVEL Models: L101, L102, L112, L103, L113 L123, (5,70) I (3,81) L201, L202, L203, L104 and L204 6 3 .752 Terminations: 02, 06, 10 and 12 5 2 (19,10) Actuators: 01, 02, 03, 05, 11 and 12 4 1 .181 TYP .200 .181 TYP (4,60) (4,60) (5,08) .065 DIA .070 TYP PC MOUNTING .125 TYP TERMINAL NOS. FOR (1,65) TYP (1,78) (3,18) REFERENCE ONLY For mounting information, see .221 TYP TERMINATIONS section, page I-23. (5,61) L203011MS02Q Splash caps are available separately and reusable, see page I-24. DP3T PC THRU-HOLE, 3 POSITION MODELS PC THRU HOLE, 4 POSITION MODELS .288 .200 .425 (7,32) .225 TYP (5,08) (10,79) (5,71) .050 X .020 TYP .170 TRAVEL .225 TYP (1,27) X (0,51) (4,32) TYP (5,70) 10 5 9 4 1.122 8 3 (28,50) 7 2 .181 TYP 6 1 (4,60) .181 TYP .050 TYP (4,60) (1,27) .065 DIA .070 TYP (1,65) TYP (1,78) TERMINAL NOS. FOR REFERENCE ONLY .232 TYP (5,89) MA  RIGHT ANGLE, PC THRU-HOLE AVAILABLE WITH: Models: L103, L201, L202, L113 and L123 Terminations: 04 Actuators: 02 and 12 PC MOUNTING For mounting information, see TERMINATIONS section, page I-23. L202021MA04Q Splash caps are available separately Horizontal Actuation and reusable, see page I-24. DPDT RIGHT ANGLE, PC, SP-3 POSITION MODELS .335 .100 TYP .400 .412 (8,51) (10,46) (2,54) (10,16) .140 (4,06) .181 TYP 4 TRAVEL 4 (4,60) 3 0.941 3 (23,90) 2 2 .200 1 (5,08) TERM. NOS. FOR 1 REFERENCE ONLY .100 TYP (2,54) .256 (6,50) .215 0.125 (5,46) (3,18) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 May 2018 www.ckswitches.com I–21 L Series Miniature Slide Switches MOUNTING STYLE ML  RIGHT ANGLE, PC THRU-HOLE AVAILABLE WITH: Models: L101, L102, L112 Terminations: 04 Actuators: 01, 02, 05, 11 and 12 PC MOUNTING For mounting information, see TERMINATIONS section, page I-23. L102021ML04Q Splash caps are available separately and reusable, see page I-24. Horizontal Actuation SPDT I MV  RIGHT ANGLE, PC THRU-HOLE AVAILABLE WITH: Models: L112 and L212 Terminations: 02, 06, 10 and 12 Actuators: 13 thru 19 PC MOUNTING For mounting information, see TERMINATIONS section, page I-23. L212132MV02Q Splash caps are available separately DPDT and reusable, see page I-24. SS  PANEL WITH MOUNTING EARS PANEL MOUNTING .425 .358 .135 (10,60) (9,09) ø .100 .225 (3,43) (2,54) (5,72) .181 TYP (4,60) .360 6 1.000 6 3 1.200 (9,14) (25,40) .760 (30,48) 5 5 2 (19,30) 1.000 .200 4 4 1 (25,40) (5,08) .150 (3,81) .110 DIA .070 TYP TRAVEL (2,79ø) TYP L202011SS03Q (1,78) .200 .125 AVAILABLE WITH: (5,08) .240 DPDT (3,18) (6,10) .050 Models: L101, L102, L112, L201 and L202 (1,27) Terminations: 01, 02, 03, 06, 10, 12 Actuators: 01, 02, 03, 05, 11 and 12 TS  PANEL WITH INTEGRAL MOUNTING EARS PANEL MOUNTING 0.250 ø (6,35) .240 .425 (10,80) (6,10) ø 0.100 TYP .070 TYP .135 (1,78) (2,54) (3,43) 0.100 (2,54) 1.000 1.000 .530 7 1.000 (25,40) (25,40) (13,46) FULL R (25,40) .941 6 TYP. (23,90) .160 TYP .200 5 L203011TS03Q (4,06) (5,08) TRAVEL .110 DIA DP3T .181 2X 0.050 (2,79ø) (4,60) .125 (1,27) TYP (3,18) 2X 0.218 0.080 .200 .358 (5,53) (2,03) AVAILABLE WITH: (5,08) (9,09) Models: L103, L113, L123 and L203 Terminations: 01, 02, 03, 06, 10, 12 Actuators: 01, 02, 03, 05, 11 and 12 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 25 May 2018 www.ckswitches.com I–22 Slide CAVITY I.D. 0.0625 HIGH X 0.010 RAISED 2X 0.050 (1,27) Slide L Series Miniature Slide Switches TERMINATIONS ‘MS, MV, SS & TS’ Mounting Styles Only 02  PC THRU-HOLE 01  SOLDER LUG WITH NOTCH 03  SOLDER LUG WITH HOLE 10  PC THRU-HOLE .085 .226 .240 (2,16) .240 .226 .060 (5,74) (6,10) (6,10) (5,74) (1,52) .062 .272 (1,57) .080 .028 .080 (6,91) (2,03) (0,71) .080 .050 (2,03) .046 .050 .080 (2,03) (1,27) (1,17) (1,27) (2,03) .020 THK. .020 THK. .020 THK. .020 THK. (0,51) (0,51) (0,51) (0,51) ‘MA & ML’ Mounting Styles Only 12  PC THRU-HOLE 06  WIRE WRAP 04  PC THRU-HOLE .419 I (10,64) .065 .256 .445 (6,50) (1,65) .085 (11,30) .080 (2,16) .080 (2,03) (2,03) .080 .050 .050 (2,03) (1,27) (1,27) .050 (1,27) .020 THK. .020 THK. (0,51) (0,51) .020 THK. (0,51) .181 TYP. .181 TYP. (4,60) (4,60) .225 .181 TYP. .181 TYP. .272 (5,72) (4,60) (4,60) (6,91) .187 TYP. .181 TYP. .181 TYP. .225 .272 (4,75) (4,60) (4,60) .065 DIA .065 DIA (5,72) (6,91) .225 .272 (1,65ø) (1,65ø) (5,72) (6,91) .065 DIA .065 DIA TYP. TYP. (1,65ø) (1,65ø) .065 DIA .065 DIA .065 DIA TYP. TYP. (1,65ø (1,65ø) (1,65ø) TYP. TYP. TYP. All models with ‘04’ All 2 position models, All 2 position models All 3 position models, All 4 position models, All 4 position models, All 3 position models terminations and except ‘04’ and ‘10’ with ‘04’ and ‘10’ except ‘04’ and ‘10’ with ‘10’ termination. except ‘04’ and ‘10’ with ‘10’ terminations. ‘ML’ mounting style. terminations. terminations. terminations. terminations. CONTACT MATERIAL OPTION CONTACT RATINGS CODE MATERIAL LOW LEVEL/DRY 1 GOLD B 0.4 VA MAX. @20 V AC OR DC max. CIRCUIT LX0X, LX1X MODELS: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC (UL). 2 SILVER Q POWER LX6X MODELS: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL). LX0X, LX1X MODELS: 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ LOW LEVEL/DRY GOLD OVER 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC (UL). G LX6X MODELS: 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC or 3 SILVER CIRCUIT OR POWER 28 V DC; 2 AMPS @ 250 V AC (UL). * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. NOTE: Any models supplied with B, Q or G contact material are RoHS compliant. 2 All models with all options when ordered with ‘G’ or ‘Q’ contact material. CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). 3 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate. NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials. SEAL NONE  NO SEAL E  EPOXY SEAL EPOXY .075 MAX. (1,91) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 25 May 2018 www.ckswitches.com I–23 L Series Miniature Slide Switches AVAILABLE HARDWARE Cap Cap Cap Compatible with 13-19 actuators Compatible with 13-19 actuators Compatible with 13-19 actuators .310 DIA. .375 DIA. .200 DIA. (7,87 ) (9,53 ) (5,08 ) .120 .138 (3,05) .250 (3,51) (6,35) .250 .120 .155 (6,35) (3,05) (3,94) PART NO. PART NO. PART NO. 708902000 BLACK 752702000 BLACK 801802000 BLACK 708903000 RED 752703000 RED 801803000 RED Material: Nylon Material: Nylon Material: Nylon Finish: Gloss Finish: Gloss Finish: Gloss I Cap Cap Cap Compatible with 13-19 actuators Compatible with 13-19 actuators Compatible with 13-19 actuators .450 SQ. (11,43) .195 (4,95) .240 (6,10) PART NO. PART NO. PART NO. PART NO. 452D02000 BLACK 894102000 BLACK 484602000 BLACK 798202263 BLACK 452D03000 RED 894103000 RED 484603000 RED 798203000 RED Material: Nylon Material: Nylon Material: Nylon Material: Nylon Finish: Gloss Finish: Gloss Finish: Gloss Finish: Matte Cap Splash Cap Splash Cap Compatible with 01-05 actuators Fits ‘MV’ mounting style, Fits ‘MS’ mounting style, LX1X models only. LXX1 & LXX2 models only. PART NO. PART PART NO. 120100602 BLACK NO. 120100300 Material: Nylon 120100200 Finish: Matte Material: Nylon Material: Nylon Splash Cap NOTE: Other colors available, consult Customer Service Center. Fits ‘MA’ mounting style, LXX3 models only. PART NO. 120100400 Material: Nylon Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 25 May 2018 www.ckswitches.com I–24 Slide