LCS Series Subminiature Sealed Snap-acting Switches Features/Benefits Typical Applications • Compact design • Motorized equipment • Long life and high electrical capacity • Sump pump • Quick connect, solder terminals, • Thermostatic controls PC terminals, wire leads • Computers • Wide variety of actuator styles • Air conditioners • RoHS compatible, RoHS compliant 14 UL61058-1 • IP67 Specifications Materials CONTACT RATING: from low level to 5 Amp SWITCH HOUSING: Thermoplastic polyester or high temperature thermoplastic (PTS) (UL 94V-0). ELECTRICAL LIFE: 10,000 cycles ACTUATOR BUTTON: Thermoplastic polyester. INSULATION RESISTANCE: 100 M ohm min. SPRING: Copper alloy. DIELECTRIC STRENGTH: 1,000 VAC PIVOT: Copper alloy. OPERATING TEMPERATURE: MOVABLE CONTACTS: Option “01” Gold plating over silver alloy -40ºC to +120ºC (without wire) Option “05” Silver alloy -40ºC to +85ºC (with UL1007 wire) STATIONARY CONTACTS: Option “01” Gold plating over silver alloy -40ºC to +105ºC (with UL1015 wire) Option “05” Silver alloy -40ºC to +105ºC (with UL1430 wire) TERMINALS: Copper alloy. -40ºC to +80ºC (with UL1061 wire) ACTUATOR LEVEL: Stainless steel. J -40ºC to +120ºC (with UL1330 wire) OPERATING FORCE: (see ACTUATOR’S option sections). MOUNTING: 2-56 screws, torque 2.3 in/lbs max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-40 thru J-43. For additional options not shown in catalog, consult Customer Service Center. L C S Series LCS Electrical Rating UL Operating Force Option 14 61058-1 2 203 grams Code 0.1 A 125/250 V AC 01 NA Circuitry Actuator C SPDT P00 Pin plunger 5 A 125/250 V AC 6 A 250 V AC W SPST N.C. 05 T00 11.9 mm short lever Y SPST N.O. T05 17.4 mm short lever T07 19.4 mm short lever Wire Type AWG T13 25.5 mm lever Wire UL # T19 33.3 mm lever (when required) (when required) T28 40.7 mm lever 20 20 AWG A UL1007 Terminations 22 22 AWG T43 55.9 mm lever B UL1015 S Solder S26 18.6 mm simulated lever 24 24 AWG C UL1430 Q 0.110 Quick Connect 26 26 AWG A05 17.2 mm lever roller D UL1061 P PC Thru Hole W Wire leads potted Z Wire leads non-potted Wire Side (when required) A Wire out the bottom B Wire out the right side C Wire out the left side D None Dimensions are shown: mm Specifications and dimensions subject to change www.ckswitches.com J–40 Snap-acting Snap-acting LCS Series Subminiature Sealed Snap-acting Switches SERIES LCS 19.8 6.4 6.7 7.5 4.85 2.2 "C" CIRCUITRY 7.45 FP 6.95 6.65 6 2.35 2.3±0.1 3.2 TYP "W" CIRCUITRY 2.3 0.1 TYP 2.6 0.1 2.8 TYP 9.5±0.15 J 7.5 0.2 TYP 0.5 0.05 15 2X 2.4 TYP "Y" CIRCUITRY ELECTRICAL RATING RoHS RoHS COMPLIANT * COMPATIBLE * OPTION CODE ELECTRICAL RATING 05 YES YES 5 AMP, 125/250 V AC YES YES 01 0.1 AMP, 125/250 V AC OPERATING FORCE OPTION CODE OPERATING FORCES (grams) 203 g. max. 2 Dimensions are shown: mm Specifications and dimensions subject to change www.ckswitches.com J–41 LCS Series Subminiature Sealed Snap-acting Switches ACTUATOR 4.4 REF 4.9 T07 A05 7.15 REF 20.95 REF P00 T19 17.2 33.3 19.4 S26 6.1 REF T00 T28 13.3.2 REF T13 28.35 REF 18.6 0.2 REF 40.7 25.5 11.9 T43 T05 J 43.55 REF 5.1 REF 55.9 17.4 C C C C E E D E D E D D B B DIFFERENTIAL MOTION OPERATING FORCE RELEASE FORCE AB CD E (MAX) (MAX) (MIN) ACTUATOR OPTION LENGTH OVER PRE FREE OPERATING CODE OF TRAVEL TRAVEL POSITION 203 203 203 POSITION LEVER (MIN) (MAX) (MAX) P00 N/A 0.6 1.2 8.4 .3 9.9 0.2 203 50 T00 11.9 0.6 3.2 8.8 .9 11.1 0.5 98 21 T05 17.40 0.9 4.3 8.8 1.1 12 0.6 82 16 T07 19.40 1 4.8 8.8 1.2 12.4 0.7 66 13 T13 25.5 1.6 6.3 8.8 1.6 13.5 0.9 54 11 T19 33.3 1.95 8 8.8 2.0 15 1.75 40 5 T28 40.7 2.1 10.1 8.8 2.6 16.3 2.3 39 8 T43 55.9 2.9 13.8 8.8 3.5 19.1 3.6 33 7 S26 18.6 1 4.6 10.7 1.2 14.1 0.65 68 14 A05 17.20 0.9 4.3 14.5 1.1 17.7 0.6 72 15 Dimensions are shown: mm Specifications and dimensions subject to change www.ckswitches.com J–42 Snap-acting Snap-acting LCS Series Subminiature Sealed Snap-acting Switches TERMINATIONS S  SOLDER Q  QUICK CONNECT 2.8mm / 0.110” 7.45 4.85 2.2 "C" CIRCUITRY 7.45 FP 6.65 6.95 6 9.3 TYP 2.35 "W" CIRCUITRY 2.3±0.1 3.2 TYP 2.3 0.1 TYP 2.8 TYP 2.6 ± 0.1 1.2 TYP 7.5 0.1 TYP 9.5±0.15 7.5±0.2 TYP "Y" CIRCUITRY 2X 2.4 0.5 0.05 2.8 15 TYP P  PC THRU HOLE Z or W  “A” WIRE ORIENTATION 6.4 TYP 15.95 8.5 TYP 7.5 ± 0.2 0.6 TYP 0.5 ± 0.05 TYP POTTING 1.35/1.5 304.8 ± 6.4 3X "W' OPTION 3±1 SHOWN 7.5 ±0.1 TYP C: GRAY NO: BLUE NC: BLACK 15±0.1 RECOMENDED J MOUNTING PATTERN Z or W  “B” WIRE ORIENTATION Z or W  “C” WIRE ORIENTATION “Y” OR “W” CIRCUITRY “Y” OR “W” CIRCUITRY BLACK COM BLUE NO BLACK COM (8.5) BLUE NO (8.5) 3±1 POTTING 21.3 12±0.1 (6.4) 3±1 (6.4) POTTING "W' OPTION 21.3 12 0.1 "W' OPTION SHOWN SHOWN Z or W  “B” WIRE ORIENTATION Z or W  “C” WIRE ORIENTATION “C” CIRCUITRY “C” CIRCUITRY BLACK COM BLACK COM GRAY NC BLUE NO BLUE NO GRAY NC (12.3) (12.3) 3±1 3±1 POTTING (6.4) (6.4) POTTING 21.3 21.3 "W' OPTION "W' OPTION 12 ± .1 SHOWN 12 ± 0.1 SHOWN CIRCUITRY C  SPDT (Single Pole, Double Throw) W  SPST N.C. (Single Pole, Single Throw, Normally Closed) Y  SPST N.O. (Single Pole, Single Throw, Normally Open) Dimensions are shown: mm Specifications and dimensions subject to change www.ckswitches.com J–43