Slide LP Series Miniature Snap-in Slide Switches Features/Benefits Typical Applications • 6 to 11 AMPS available • Small appliances • Easy assembly—Snap-in mounting • Outdoor appliances • Contamination resistant—extended actuator • Portable tools • Positive detent • RoHS compliant Models Available Specifications Materials CONTACT RATING: Q contact material (LP0X, LP2X Models: 6 AMPS HOUSING: 6/6 nylon (UL94V-2), black. I @ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA). ACTUATOR: Glass filled acetal, UV and petroleum resistant, (LP7X, LP8X Models): 11 AMPS @ 125/250 V AC (UL/CSA). black. See page I-27 for additional ratings. CONTACTS: Q contact material: Copper, silver plated. See page ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. I-27 for additional contact materials. 9 INSULATION RESISTANCE: 10 Ω min. TERMINALS: Q contact material: Copper, silver plated. See page DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. I-27 for additional contact materials. CONTACT RESISTANCE: Below 10 m Ω typ. initial CONTACT SPRING: Music wire or stainless steel. @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. TERMINAL SEAL: Epoxy. OPERATING TEMPERATURE: -30ºC to +65ºC STORAGE TEMPERATURE: -30ºC to +85ºC NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I–26 and I–27. For additional options not shown in catalog, consult Customer Service Center. Switch Function LP22 DPDT, 6 AMP LP02 SPDT, 6 AMP Actuator LP81 DPST, 11 AMP C2 Black cap LP82 DPDT, 11 AMP C1 Whitecap C3 Red cap Detent 1 With detent Mounting Style T2 Snap-in panel with tabs (D, L, N markings only) Terminations 03 Solder lug with hole Housing Markings NONE No markings D ON-OFF Contact Material Q Silver B Gold Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com I–25 LP Series Miniature Snap-in Slide Switches SWITCH FUNCTION NO. MODEL AMP SWITCH NO. MODEL AMP SWITCH POLES NO. RATING* FUNCTION SCHEMATIC POLES NO. RATING* FUNCTION SCHEMATIC SP LP02 6 SPDT LP22 6 DPDT LP81 11 DPST DP All models with all options when ordered with ‘Q’ contact material. Contacts make on side actuator thrown. * For complete contact ratings, see CONTACT MATERIALS Section, page I-27. LP82 11 DPDT I .200 (5,08) Terminal Nos. For Reference Only Part number shown: LP22C21S203Q ACTUATOR C1; C2; C3 OPTION ACTUATOR CAP CODE2 COLOR C2 BLACK C1 WHITE NOTE: Actuator finish: gloss. Other colors available, C3 RED consult Customer Service Center. DETENT 1 WITH DETENT MOUNTING STYLE T2 SNAP-IN PANEL WITH TABS PANEL MOUNTING PANEL THICKNESS DIM ‘A’ .030–.045 .578 DIM. ‘A’ (0,76) (1,14) (14,68) .046–.059 .585 (1,17) (1,50) (14,86) .060–.089 .598 (1,52) (2,26) (15,19) .090–.120 .610 Mounting style T2 suitable for markings. (2,29) (3,05) (15,49) See HOUSING MARKINGS options. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ck-components.com I–26 Slide Slide LP Series Miniature Snap-in Slide Switches TERMINATIONS 03 SOLDER LUG WITH HOLE .200 (5,08) HOUSING MARKINGS I NONE NO MARKINGS D ON-OFF Orientation of actuator NOTE: Housing markings are available with ‘T2’ mounting style only. The marking color and terminals. on all housings with marking options ‘D’ is white, standard. Other marking colors are available, consult Customer Service Center. CONTACT MATERIAL OPTION CONTACT RATINGS CODE MATERIAL LP0X, LP2X MODELS: 6 AMPS @ 125 V AC or 28 V DC; 2 3 AMPS @ 250 V AC (UL/CSA). Q SILVER POWER LP7X, LP8X MODELS: 11 AMPS @ 125/250 V AC (UL/CSA). LOW LEVEL/DRY 1 GOLD B 0.4 VA MAX. @20 V AC OR DC MAX. CIRCUIT * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 NOTE: Any models supplied with Q or B contact material are RoHS compliant. CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. 2 CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). All models with all when ordered with ‘Q’ contact material. 3 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com I–27