C&K NP8S2R202GE

NP Series Sealed Industrial Pushbutton Switch Features/Benefits Typical Applications A • IP68 sealed • Harsh environments • 1,000,000 life cycle • Off-Road • Multiple housing styles • Industrial • Capable of up to 5A resistive load • Transportation • Wirelead options available • Military • RoHS compliant Specifications Electrical (cont.) FUNCTION: SPDT Double Break (Form Z) Momentary DIELECTRIC STRENGTH: 1000 V AC for 1 min. CONTACT ARRANGEMENT: N.O. and N.C. INSULATION RESISTANCE: 1 G Ω @ 500 VDC MOUNTING TYPE: Threaded front or rear mount and slot mount INITIAL CONTACT RESISTANCE 50 mΩ max (without wire leads) TORQUE SPEC FOR THREADED BODY: Do not exceed 50 in-lbs (5.65 N-m) BOUNCE TIME: <5 ms Materials Mechanical HOUSING: 6061-T6 Aluminum, black or clear anodized OPERATING LIFE: 1,000,000 cycles BASE: PBT TOTAL TRAVEL: 1.6 ± 0.15 mm CAP: PBT OPERATING POINT 0.9 ± 0.25 mm ACTUATOR: PBT OVER TRAVEL: 0.45 min. INTERNAL SEAL: Silicone rubber OPERATING FORCE: 8N ± 1.5N TERMINALS: Copper with silver nickel inlay, silver plating VIBRATION: 10-500 Hz 10g Max MOVABLE CONTACT: Copper alloy, gold over silver plating SHOCK: 50g 11ms sawtooth wave TERMINAL SEAL: Epoxy Electrical Operating Environment CONTACT RATING: Option G - Gold over Silver OPERATING TEMPERATURE: -40˚C to +85˚C 10mA/5 VDC (1,000,000 cycles) ESD PROTECTION: 15KV min. Option Q - Silver 1A/32 VDC resistive (100,000 cycles) 5A/32 VDC resistive (25,000 cycles) Process Environment 3A/32 VDC resistive (25,000 cycles) SEALING: IP68 NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. N P 8 E Designation NP NP Series Terminal Seal Operating Force E Epoxy 8 8 Newtons All models are epoxy sealed Contact Material Actuator Style Q Silver (STD) S Standard G Gold over silver E Extended (D housing style only) Termination 03 Solder Lug (STD) Actuator Color* 02 PC Pin (G Contact Material) 2 Black (STD) W4 4x 12” 22 AWG UL1569 wire (overmolded) Housing Style 3 Red W3 3x 12” 22 AWG UL1569 wire (overmolded) T Standard threaded mount 4 Orange * Please contact L Long threaded mount 5 Yellow Housing Anodizing Color Customer Service H Short threaded mount 9 Gray 1 Clear anodized for additional colors. S Slot mount 2 Black anodized (STD) R Rear mount D Dome bezel P Tapered bezel Specifications and dimensions subject to change www.ckswitches.com A-120 Pushbutton Pushbutton NP Series Sealed Industrial Pushbutton Switch STANDARD VIEW A 11.90 [0.469] 1.00 6.60 [0.260] [0.039] ELECTRICAL SCHEMATIC 9.00 [0.354] N.C. 1 2 20.10REF [0.791] 0.50 5.39 [0.020] [0.212] MAX 11.30 TYP [0.445] 3 4 15/32-32 UNS-2A N.O. 2.60 TYP 0.40 TYP 0.40TYP [0.102] [0.016] [0.016] 10.80 [0.425] ACROSS FLATS OPERATING FORCE OPTION CODE OPERATING FORCE 8 8 N ACTUATOR STYLE E EXTENDED (D HOUSING STYLE ONLY) S STANDARD 2.60 [0.102] 4.55 [0.179] 9.15 7.20 [0.360] [0.283] Terminal Seal E Epoxy ACTUATOR COLOR All models are epoxy sealed OPTION CODE ACTUATOR COLOR 2 Black 3 Red 4 Orange 5 Yellow 9 Gray For additional colors please contact Customer Third Angle Service. Projection Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ckswitches.com A-121 NP Series Sealed Industrial Pushbutton Switch HOUSING STYLE A 11.90 T STANDARD THREADED MOUNT [0.469] 1.00 6.60 [0.260] [0.039] 9.00 [0.354] 20.10REF 0.50 22.60REF [0.791] 5.39 [0.020] [0.890] [0.212] MAX 11.30 TYP 13.60 TYP [0.445] [0.54] 15/32-32 UNS-2A 2.60 TYP 0.40 TYP 0.40TYP [0.102] [0.016] [0.016] 2.70 TYP [0.106] 0.70 TYP 10.80 [0.028] [0.425] ACROSS FLATS PC TERMINALS EPOXY SEALED 3 2X65.0° N.C. N.O. 65° (1 & 2) (3 & 4) 7.90 7.50 SCALE 9:1 SCALE 9:1 N.C. [0.311] [0.295] 2 1 N.O. N.O. 13.95 2X 1.67 REF N.C. 2.00 [0.549] [0.066] 12.30 [0.079] 4X 0.90 [0.484] TYP [0.035] 4.50 2X 3.58 REF 4 [0.177] 11.00 [0.141] [0.433] 7.50 [0.295] PC HOLE PATTERN BOARD VIEW PANEL CUTOUT L LONG THREADED MOUNT 15.75 [0.620] 2X 2.20 [0.087] 2X 3.05 11.90 [0.120] [0.469] 6.60 1.02 1.50 [0.260] 9.50 [0.059] [0.040] [0.374] 24.70REF 0.50 [0.972] 27.20REF 9.55 [0.020] [0.376] [1.071] MAX 15.40 TYP 17.70 TYP [0.606] 15/32-32 UNS-2A [0.697] 4.90 [0.19] 0.40 TYP 0.40TYP [0.016] 2.60TYP [0.016] [0.102] 2.70TYP 0.70 TYP [0.106] [0.028] PC TERMINALS 7.50 11.65 [0.295] [0.459] N.C. 4X 0.90 2X65.0° 65.0° [0.035] 7.50 [0.295] N.C. N.O. 11.35 N.O. [0.447] TANGENT N.O. TO FLAT 12.3 [0.484] 2X 1.67 REF 2.00 [0.066] N.C. [0.079] PANEL CUTOUT TYP 7.90 2X 3.58 REF [0.311] [0.141] 4.50 11.90 [0.177] [0.469] Third Angle PC HOLE PATTERN Projection BOARD VIEW Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ckswitches.com A-122 Pushbutton Pushbutton NP Series Sealed Industrial Pushbutton Switch HOUSING STYLE A H SHORT THREADED MOUNT 15.75 [0.620] 2X 2.20 [0.087] 2X 3.05 [0.120] 11.90 [0.469] 6.60 [0.260] 1.02 1.50 9.50 [0.040] [0.059] [0.374] 20.10REF [0.791] 22.60REF 4.89 [0.890] [0.192] 0.50 13.10 [0.020] 15/32-32 UNS-2A 10.80 MAX [0.516] [0.43] 4.90 [0.193] 0.40 TYP 2.60 [0.016] [0.102] 0.40 2.70 [0.016] [0.106] 0.70 TYP 7.50 [0.028] [0.295] 11.65 N.C. [0.459] PC TERMINALS 7.50 65.0° [0.295] N.O. 65.0° 0.90 2X 1.67 [0.035] [0.066] 11.35 N.C. [0.447] REF TANGENT TO FLAT N.O. 2.00 TYP 12.30 [0.079] [0.484] N.O. PANEL CUTOUT 11.90 7.90 N.C. 2X 1.67 4.50 [0.469] [0.066] [0.177] [0.311] REF PC HOLE PATTERN BOARD VIEW 11.90 S SLOT MOUNT [0.469] 4.40 6.60 1.50 [0.173] [0.260] [0.059] 9.50 [0.374] 3.40 [0.134] 20.10REF 22.60REF [0.791] [0.890] 10.80 TYP [0.425] 13.10 TYP 11.90 [0.516] [0.469] 4.90TYP [0.193] 0.40TYP 0.40 TYP 2.60TYP [0.016] [0.016] [0.102] 2.70TYP [0.106] 0.70 TYP [0.028] PC TERMINALS 7.50 [0.295] N.C. 65° 2X65.0° 7.50 [0.295] 7.90 N.O. N.C. [0.311] N.O. N.O. 2.00TYP 15.85 2X 1.67 REF [0.079] [0.624] N.C. [0.066] 4.50 [0.177] 4X 0.90 2X 3.58 REF 11.90 [0.035] [0.141] [0.469] ACROSS FLATS PC HOLE PATTERN BOARD VIEW Third Angle Projection Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ckswitches.com A-123 NP Series Sealed Industrial Pushbutton Switch HOUSING STYLE A 10.85 R REAR MOUNT [0.427] ACROSS FLATS 14.30 [0.563] 2.15 7.75 [0.085] [0.305] 0.50 10.77 8.62 [0.020] [0.424] 8.15 [0.339] [0.321] MAX 1.20 18.02 REF [0.047] 20.52 REF [0.709] [0.808] 15/32-32 UNS-2A 7.45 TYP 9.75 TYP [0.293] [0.384] 4.90TYP [0.193] 2.60TYP 0.40TYP 2.40TYP [0.102] [0.016] [0.094] 0.70 TYP 0.40 TYP 2.70TYP [0.028] [0.016] [0.106] PC TERMINALS 7.50 [0.295] N.C. 12.30 [0.484] 4X 0.90 [0.035] 7.50 2X 65.0° 2.00 [0.295] 11.00 [0.079] [0.433] N.C. 7.90 N.O. [0.311] N.O. N.O. PANEL CUTOUT REF 2X 1.67 N.C. [0.066] 4.50 2X 3.58 REF [0.177] [0.141] PC HOLE PATTERN BOARD VIEW 11.65 17.50 [0.459] [0.689] D DOME BEZEL 11.90 12.30 [0.469] [0.484] PANEL CUTOUT 2.45 [0.096] 0.50 [0.020] 7.05 MAX [0.278] 18.15 REF 5.45 20.65 REF [0.715] [0.215] [0.813] 11.30 TYP [0.445] 13.60 TYP 15/32-32 UNS-2A [0.535] 4.90 [0.193] 0.40 TYP 0.40 [0.016] [0.016] 2.70TYP 0.70 TYP [0.106] [0.028] PC TERMINALS 4.40 [0.173] 65.0° 7.50 2X65.0° [0.295] 4X 0.90 [0.035] N.O. N.C. 7.90 11.35 [0.311] EXTENDED CAP N.O. [0.447] TANGENT N.O. TO FLAT 2X 1.67 REF [0.066] 2.00 TYP N.C. [0.079] Third Angle Projection 2X 3.58 REF [0.141] 7.50 PC HOLE PATTERN [0.295] Dimensions are shown: Inches (mm) BOARD VIEW N.C. Specifications and dimensions subject to change www.ckswitches.com A-124 Pushbutton Pushbutton NP Series Sealed Industrial Pushbutton Switch HOUSING STYLE A P TAPERED BEZEL 10.00 [0.394] 7.75 2.15 [0.305] [0.085] 15/32-32 UNS-2A 5.07 [0.200] 7.30 0.50 18.02 REF [0.288] [0.020] 20.52REF [0.709] MAX [0.808] 13.15 TYP 15.45 TYP [0.518] [0.608] 4.90 [0.193] 2.60TYP 0.40 TYP 0.40TYP [0.102] [0.016] 10.80 2.70 [0.016] [0.425] [0.106] 10.80 0.70 TYP [0.425] [0.028] PC TERMINALS 7.50 [0.295] N.C. 2X65.0° 7.50 65° 7.90 N.C. [0.295] [0.311] N.O. 12.30 N.O. [0.484] 11.00 N.O. [0.433] 2X 1.67 REF N.C. [0.066] 2.00 4X 0.90 [0.079] 4.50 [0.035] TYP [0.177] 2X 3.58 REF PANEL CUTOUT [0.141] 14.27 PC HOLE PATTERN [0.562] BOARD VIEW 10.80 [0.425] ACROSS FLATS HOUSING ANODIZING COLOR OPTION CODE ANODIZING COLOR 1 Clear anodized 2 Black anodized (STD) TERMINATION 03 SOLDER LUG (STD) 02 PC PIN (G CONTACT MATERIAL) 2.45 TYP 0.25 TYP [0.096] [0.010] 2.55 TYP 0.70 TYP [0.100] [0.028] Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com A-125 NP Series Sealed Industrial Pushbutton Switch TERMINATION A 14.20 14.70 14.70 16.55 14.70 9.65 18.80 [0.579] [0.559] [0.579] [0.652] [0.380] [0.579] [0.740] REF REF REF REF REF REF 302.80±12.70 [11.92±0.50] 3 OR 4 WIRES 22 AWG UL1569 (SEE SCHEMATICS) W4 4X 12” 22 AWG UL1569 WIRE (OVERMOLDED) W3 3X 12” 22 AWG UL1569 WIRE (OVERMOLDED) ELECTRICAL SCHEMATIC - 3 WIRES ELECTRICAL SCHEMATIC - 4 WIRES 1 2 1 2 RED RED RED BLACK N.C. N.C. N.C. COMMON WHITE WHITE WHITE N.O. N.O. N.O. 3 4 3 4 CONTACT MATERIAL OPTION CODE CONTACT MATERIAL Q Silver (STD) G Gold over Silver TERMINAL SEAL E EPOXY All models are epoxy sealed HARDWARE HEX NUT LOCKWASHER PANEL GASKET 851D02000 707100201 Nickel-plated 700302202 15/32-32 UNS-2B THD 15.06 12.00 [0.593] [0.472] 14.17 [0.558] ACROSS FLATS 14.00 [0.551] 12.12 [0.477] 20.0° CHAMFER 0.53 1.98 0.89 2 SIDES [0.021] 0.56 [0.035] [0.078] [0.022] Third Angle Projection Dimensions are shown: mm (inches) Specifications and dimensions subject to change www.ckswitches.com A-126 Pushbutton