Manufacturers
C&K SD10H0SB
Description
Switch DIP OFF ON SPST 10 Flush Slide 0.1A 25VDC Gull Wing 2000Cycles/SwitchCycles 2.54mm SMD Tube
SD10H0SB
Part Number
SD10H0SB
Price
Request Quote
Manufacturer
C&K
Lead Time
Request Quote
Category
Switches » Switch DIP
Specifications
Manufacturer
C&K
Manufacturers Part #
SD10H0SB
Lead Time
8 Week Lead Time
Industry Aliases
SD10H0SB
Sub-Category
DIP Switches
Selling Alternatives
SD10H0SK
Series
SD
Factory Pack Quantity
20
Datasheet
Extracted Text
DIP SD Series Low Profile DIP Switches Features/Benefits Typical Applications • Low profile design saves space • Address switch for industrial controls • Thru-hole and surface mount models • Logic switching for computers H and peripherals • Tape and reel packaging available • Function controlling for • Sealed with top tape numerous applications • RoHS compliant PACKAGING: Thru-hole switches supplied in rigid dispensing tubes Specifications in full-tube quantities only: this may effect order quantity. Surface SWITCH FUNCTION: SPST - 2, 3, 4, 5, 6, 7, 8, 9, 10 & 12 mount switches available in tape and reel packaging by added ‘R’ positions to end of part number; 1,000 pieces per reel. Switch position 1 denotes pin number 1. All switch actuators in ‘OFF’ position, CONTACT RATING: standard. Carry: 100 mA @ 50 V DC max. Materials Switch: 0.1 mA @ 5 V DC min to 100 mA @ 25 V DC max. MECHANICAL AND ELECTRICAL LIFE: 2,000 make-and-break CASE & COVER: (PPA), flame retardant (UL 94V-0) cycles at full load, each circuit. ACTUATOR: Nylon, flame retardant (UL 94V-0) CONTACT RESISTANCE: Below 50 milliohms typ. initial CONTACTS: BeCu with gold plate. @ 2-4 V DC, 100mA. TERMINALS: Bright tin-plated brass. 9 INSULATION RESISTANCE: 10 ohms min. TERMINAL SEAL: All terminals insert molded. DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between TAPE SEAL: Polyimide. adjacent terminals. STORAGE TEMPERATURE: -40°C to 85°C. Note: Specifications and materials listed above are for switches with standard options. OPERATING TEMPERATURE: -40°C to 85°C. For information on specific and custom switches, consult Customer Service Center. OPERATING FORCE: 100-700g inital. How To Order The Build-A Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. S D Number Packaging of Positions (None) Tubes SD02 SD07 R Tape and Reel SD03 SD08 SD04 SD09 Actuator SD05 SD10 H0 Flush Actuator “OFF” position Process Seal SD06 SD12 H1 Extended Actuator “OFF” position (None) Tape seal H2 Flush Actuator “ON” position D No tape seal H3 Extended Actuator “ON” position Contact Material B Gold 10µ IN Terminations B1 Gold 30µ IN * S Gull wing (None) PC ThruHole * Consult factory for availability Dimensions are shown: Dimensions are shown: Inch (mm) Inch (mm) Specifications and dimensions subject to change Specifications and dimensions subject to change 9 January 2018 www.ckswitches.com H–13 SD Series Low Profile DIP Switches Sealed Flush Actuator – With Top Tape, Thru-hole Terminals Process sealed - withstands soldering and cleaning processes ROHS NO. QUANTITY PART NUMBER POS. DIM. ‘A’ PER TUBE DIM. 'A' SD02H0B 2 .258 (6,55) 85 H .300 TYP. SEE CHART .027 Ø.038 (7,6) (0,70) SD03H0B 3 .358 (9,09) 60 ACTUATOR TRAVEL (0,97) ON SD04H0B 4 .458 (11,63) 45 TYP. .263 SD05H0B 5 .558 (14,17) 40 (6,68) SD06H0B 6 .658 (16,71) 30 18 2 3 4 5 6 7 .142 .100 SD07H0B 7 .758 (19,25) 25 (3,62) (2,54) ORIENTATION MARK SD08H0B 8 .858 (21,79) 25 TYP. SD09H0B 9 .958 (24,33) 20 PEELABLE .168 TYP. .315 TYP. TAPE SEAL SD10H0B 10 1.058 (26,87) 20 (4,27) (8,00) SD12H0B 12 1.258 (31,95) 15 Schematic .023 TYP. (0,60) .126 TYP. STANDOFF .010 TYP. (3,20) SPST (0,25) .059 TYP. .325 TYP. .100 TYP. (1,50) (8,25) (2,54) .022 TYP. Table applicable to “H0” and “H2” actuator options. (0,55) Sealed Flush Actuator – With Top Tape, Surface Mount Terminals RoHS NO. QUANTITY PART NUMBER POS. DIM. ‘A’ PER TUBE DIM. 'A' .027 SEE CHART (0,70) SD02H0SB 2 .258 (6,55) 85 ACTUATOR .243 TYP. TRAVEL SD03H0SB 3 .358 (9,09) 60 (6,17) ON .435 MIN. SD04H0SB 4 .458 (11,63) 45 (11,05) .263 SD05H0SB 5 .558 (14,17) 40 (6,68) 18 2 3 4 5 6 7 SD06H0SB 6 .658 (16,71) 30 .100 .142 (2,54) (3,62) SD07H0SB 7 .758 (19,25) 25 .044 MIN. TYP. ORIENTATION MARK (1,12) SD08H0SB 8 .858 (21,79) 25 .160 SD09H0SB 9 .958 (24,33) 20 PEELABLE (4,06) .315 TYP. TAPE SEAL WITH SD10H0SB 10 1.058 (26,87) 20 (8,00) TAPE SD12H0SB 12 1.258 (31,95) 15 Schematic .010 TYP. .100 TYP. (0,25) .010 TYP. (2,54) .300 .022 TYP. (0,25) (7,62) (0,55) STANDOFF SPST .390 (9,91) Table applicable to “H0” and “H2” actuator options. Sealed Extended Actuator – With Top Tape, Thru-hole Terminals RoHS NO. QUANTITY PART NUMBER POS. DIM. ‘A’ PER TUBE .027 DIM. 'A' (0,70) SEE CHART .300 TYP. ACTUATOR SD02H1B 2 .258 (6,55) 85 (7,6) Ø.038 TRAVEL (0,97) SD03H1B 3 .358 (9,09) 60 ON TYP. .263 SD04H1B 4 .458 (11,63) 45 (6,68) SD05H1B 5 .558 (14,17) 40 18 2 3 4 5 6 7 .142 .100 SD06H1B 6 .658 (16,71) 30 (3,62) (2,54) ORIENTATION MARK SD07H1B 7 .758 (19,25) 25 TYP. SD08H1B 8 .858 (21,79) 25 .315 TYP. PEELABLE .168 TYP. (8,00) TAPE SEAL SD09H1B 9 .958 (24,33) 20 (4,30) SD10H1B 10 1.058 (26,87) 20 SD12H1B 12 1.258 (31,95) 15 H1 Actuator 0.010 TYP. (0,25) Schematic .023 TYP. (0,60) .126 TYP. STANDOFF .010 TYP. (3,20) (0,25) .059 TYP. .325 TYP. .100 TYP. (1,50) (8,25) SPST (2,54) .022 TYP. (0,55) Table applicable to “H1” and “H3” actuator options. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 9 January 2018 www.ckswitches.com H–14 DIP DIP SD Series Low Profile DIP Switches Sealed Extended Actuator – With Top Tape, Surface Mount Terminals RoHS NO. QUANTITY .027 DIM. 'A' PART NUMBER POS. DIM. ‘A’ PER TUBE SEE CHART (0,70) ACTUATOR .243 TYP. SD02H1SB 2 .258 (6,55) 85 TRAVEL (6,17) H ON .435 MIN. SD03H1SB 3 .358 (9,09) 60 .263 (11,05) SD04H1SB 4 .458 (11,63) 45 (6,68) 18 2 3 4 5 6 7 SD05H1SB 5 .558 (14,17) 40 .100 .142 (2,54) SD06H1SB 6 .658 (16,71) 30 (3,62) .044 MIN. TYP. ORIENTATION MARK (1,12) SD07H1SB 7 .758 (19,25 25 .170 SD08H1SB 8 .858 (21,79) 25 PEELABLE (4,31) .315 TYP. TAPE SEAL WITH SD09H1SB 9 .958 (24,33) 20 (8,00) TAPE SD10H1SB 10 1.058 (26,87) 20 SD12H1SB 12 1.258 (31,95) 15 H1 Actuator 0.010 TYP. .010 TYP. (0,25) .100 TYP. Schematic (0,25) .010 TYP. (2,54) .300 .022 TYP. (0,25) (7,62) (0,55) STANDOFF .390 (9,91) SPST Table applicable to “H1” and “H3” actuator options. TAPE & REEL PACKAGING – SURFACE MOUNT OPTIONS ONLY .079 DIM ‘P’ RoHS NO. QUANTITY (2,00) SEE CHART PART NUMBER POS. DIM. ‘A’ PER REEL .057 SD02H0SBR 2 .258 (6,55) 1000 (4,00) DIM ‘D’ .069 .061 DIA SEE SD03H0SBR 3 .358 (9,09) 1000 (1,75) (1,55) CHART SD04H0SBR 4 .458 (11,63) 1000 SD05H0SBR 5 .558 (14,17) 1000 SD06H0SBR 6 .658 (16,71) 1000 SD07H0SBR 7 .758 (19,25 1000 SD08H0SBR 8 .858 (21,79) 1000 DIM ‘C’ DIM ‘B’ SEE CHART SD09H0SBR 9 .958 (24,33) 1000 SEE DIM ‘G’ SD10H0SBR 10 1.058 (26,87) 1000 CHART SEE CHART SD12H0SBR 12 1.258 (31,95) 1000 Schematic SPST DIM ‘A’ SEE CHART ELONGATED HOLES ON SD07-SD12 ONLY Table applicable to “H0” and “H2” actuator options. FEED DIRECTION DIM ’A’ DIM ’B’ DIM ’G’ DIM ’P’ DIM ’D’ DIM ’C’ POCKET POCKET SPROCKET PITCH POCKET SWITCH NO. TAPE LENGTH LENGTH HOLE BETWEEN DEPTH WIDTH @ BOTTOM @ BOTTOM SPACING POCKETS SD02 .413(10,5) .630(16,0) .315(8,0) .177(4,5) N/A .472(12,0) SD03 .406(10,3) .630(16,0) .177(4,5) .406(10,3) N/A .472(12,0) SD04 .429(10,9) .476(12,1) .954(24,0) .177(4,5) N/A .472(12,0) SD05 .406(10,3) .602(15,3) .954(24,0) .177(4,5) .472(12,0) N/A SD06 .406(10,3) .701(17,8) .954(24,0) .177(4,5) .472(12,0) N/A SD07 .406(10,3) .803(20,4) 1.260(32,0) .177(4,5) 1.118(28,4) .472(12,0) SD08 .406(10,3) .854(21,7) 1.732(44,0) .177(4,5) 1.591(40,4) .472(12,0) SD09 .406(10,3) 1.028(26,1) 1.732(44,0) .177(4,5) 1.591(40,4) .472(12,0) SD10 .406(10,3) 1.055(26,8) 1.732(44,0) .177(4,5) 1.591(40,4) .472(12,0) SD12 .406(10,3) 1.303(33,1) 1.732(44,0) .177(4,5) 1.591(40,4) .472(12,0) Reel Information Outside diameter 13.00 (333,0) Pilot hole .512 (13,0) Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 9 January 2018 www.ckswitches.com H–15
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the SD10H0SB?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods