C&K Y2011U2C103LQ

Switchlock Y Series 4, 5 & 6 Tumbler Switchlocks Features/Benefits Typical Applications • Anti-static switch—exceeds • Point-of-sale terminals 20 KV DCstatic resistance • Cash registers • Momentary models available • Computers • Wire leads and harnesses available Patent No. 4,639,562 Models Available Specifications Materials CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or LOCK: Zinc alloy with stainless steel facing, std. (4 & 5 tumbler lock 28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page L-9 for and 6 tumbler tubular lock). additional ratings. KEYS: Two nickel plated brass keys, with code number, std. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. (4 and 5 tumbler lock). Two die cast chrome plated zinc alloy keys,std. (6 tumbler lock). CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. SWITCH HOUSING: Glass filled polyester (UL 94V-0). 9 INSULATION RESISTANCE: 10 Ω min. CONTACTS AND TERMINALS: Q contact material: Copper, silver plated. See page L-9 for additional contact materials. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. MOUNTING NUT: Zinc alloy. INDEXING: 45º or 90º, 2-4 positions (4&5 tumbler switchlocks). 45º, 3 positions; or 90º, 2 positions (6 tumbler tubular switch- MOUNTING CLIP: Steel, zinc plated. locks). DRESS NUT: Brass, nickel plated. Other functions available, consult Customer Service Center. TERMINAL SEAL: Epoxy. STATIC RESISTANCE: Anti-static models exceed 20 KV DC static NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. resistance @ sea level, lock body to terminals. MOUNTING TORQUE: 10 in./lbs.; 14 in./lbs max. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. OPERATING TEMPERATURE: -30°C to 85°C. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L–4 through L–10. For additional options not shown in catalog, consult Customer Service Center. Switch and Lock Function Y10013 SP, 45°, keypull pos. 1 Keying Y1011U SP, 90°, keypull pos. 1 & 2 2 Two nickel plated brass keys (4 & Y1001U SP, 45°, keypull pos. 1 & 3 5 tumbler) or two die cast zinc alloy keys with Y2001U DP, 45°, keypull pos. 1 & 3 chrome plating (6 tumbler) Y10082 SP, 45°, keypull pos. 1 6 Two nickel plated brass keys with code on lock face Y20082 DP, 45°, keypull pos. 1 L Lock Type Y100AA SP, 45°, keypull pos. 1, 2 & 3 A 4 Tumbler lock (YXO8 models) Y200AA DP, 45°, keypull pos. 1, 2 & 3 C 4 Tumbler lock with detent Y100AB SP, 45°, keypull pos. 1, 2, 3 & 4 V 6 Tumbler tubular lock Y200AB DP, 45°, keypull pos. 1, 2, 3 & 4 B 5 Tumbler lock Y10113 SP, 90°, keypull pos. 1 R 4 Tumbler lock with detent and anti-Static switch Y20113 DP, 90°, keypull pos. 1 W 6 Tumbler tubular lock with anti-Static switch Y1011C SP, 90°, keypull pos.2 Y2011C DP, 90°, keypull pos. 2 Lock Finish Y2011U DP, 90°, keypull pos. 1 & 2 2 Stainless steel facing Y14173 SP, 90°, keypull pos. 1 8 Gloss black facing Terminations Contact Material Y1417U SP, 90°, keypull pos. 1,2 & 3 F Polished nickel facing 03 Solder lug with hole Q Silver Y10812 SP, 45°, mom., keypull pos. 1 01 Solder lug with notch B Gold Y20812 DP, 45°, mom., keypull pos. 1 02 PC Thru-hole G Gold over silver Y19073 SP w/common, 90°, keypull pos. 1 07 Solder lug with hole Y1907U SP w/common, 90°, keypull pos. 1, 2 & 3 (Y19OXX models only) Y1900S SP w/common, 90°, keypull pos. 1, 2, 3 & 4 Seal WC Wire lead NONE No seal Mounting/Lock Style E Epoxy seal N With nut D With clip L With removable dress nut and latch pawl R With removable dress nut Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–3 Y Series 4, 5 & 6 Tumbler Switchlocks SWITCH AND LOCK FUNCTION SINGLE& DOUBLE POLESWITCHES CONNECTED TERMINALS NO. NO. MODEL KEY PULL LOCK POS. 1 POS. 2 POS. 3POS. 4 TUMBLERS POLES NO. POSITIONS CONFIGURATION INDEXING POS. 1 2 4, 5 & 6 SP Y10013 8-1 1-2 2-3 Position 1 3 POS. 1 Y1001U 2 SP 8-1 1-2 2-3 4, 5 & 6 Positions 1 & 3 DP 8-1, 4-5 1-2, 5-6 2-3, 6-7 3 Y2001U POS. 1 SP Y10082 8-1 1-2 7-8 3 2 4 & 5 Position 1 DP 8-1, 4-5 1-2, 5-6 7-8, 3-4 Y20082 45º POS. 1 3 2 SP Y100AA 8-1 1-2 7-8 4 Positions 1, 2 & 3 DP 8-1, 4-5 1-2, 5-6 7-8, 3-4 Y200AA POS. 1 2 Y100AB SP 8-1 1-2 2-3 3-4 4 Positions 1, 2, 3 & 4 3 DP 8-1, 4-5 1-2, 5-6 2-3, 6-7 3-4, 7-8 Y200AB 4 POS. 1 SP Y10113 8-1 1-3 4, 5 & 6 Position 1 DP 8-1, 4-5 1-3, 5-7 Y20113 2 POS. 1 Y1011C SP 8-1 1-3 4 & 5 Position 2 DP 8-1, 4-5 1-3, 5-7 Y2011C 2 POS. 1 SP Y1011U 8-1 1-3 90º 4, 5 & 6 Positions 1 & 2 DP 8-1, 4-5 1-3, 5-7 2 Y2011U POS. 1 4 SP 7-1 1-3 6-7 Position 1 Y14173 3 2 POS. 1 4 SP 7-1 1-3 6-7 Positions 1, 2 & 3 Y1417U 3 2 SINGLE& DOUBLE POLE MOMENTARY SWITCHES CONNECTED TERMINALS L NO. NO. MODEL KEY PULL LOCK POS. 1 POS. 2 POS. 3POS. 4 TUMBLERS POLES NO. POSITIONS CONFIGURATION INDEXING POS. 1 Y10812 2 SP 8-1 1-2 45º 4 Position 1 DP 8-1, 4-5 1-2, 5-6 Mom. Y20812 TERMINAL NUMBERS LEGEND Terminal numbers molded on bottom of housing. = Momentary Positions (45º) All models with all options when ordered = Detent Positions (45º or 90º ) with ‘G’ or ‘Q’ contact material. = Key pull possible in these positions. = Stop Positions Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–4 Switchlock Switchlock Y Series 4, 5 & 6 Tumbler Switchlocks SWITCH AND LOCK FUNCTION SINGLE POLE SWITCHES WITH COMMON CONNECTED TERMINALS NO. NO. MODEL KEY PULL LOCK POS. 1 POS. 2POS. 3POS. 4 TUMBLERS POLES NO. POSITIONS CONFIGURATION INDEXING POS. 1 Y19073 Position 1 3 2 C-1 C-2 C-4 POS. 1 Positions 1, 2 & 3 Y1907U 3 2 4 SP 90º POS. 1 4 2 Y1900S C-1 C-2 C-3 C-4 Positions 1, 2, 3 & 4 3 LEGEND TERMINAL NUMBERS Terminal numbers marked on insulator. = Detent Positions (45º or 90º) All models with all options when ordered = Key pull possible in these positions. with ‘G’ or ‘Q’ contact material. = Stop Positions NOTE: Epoxy seal not available. Removable dress nut not available with any Y190XX models. 4 & 5 Tumbler SLOTS IN THIS L LOCATION FOR MOUNTING STYLE 'D' CLIP Part number shown: Y100132C203NQ 6 Tumbler SLOTS IN THIS LOCATION FOR MOUNTING STYLE 'D' CLIP Part number shown: Y1011U2V203NQ Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–5 Y Series 4, 5 & 6 Tumbler Switchlocks SWITCH AND LOCK FUNCTION AVAILABLE OPTION COMBINATIONS MOUNTING/LOCK STYLES LOCK TYPES TERMINATIONS A MODELS BC RV W01020307WCD LN R YX0013 •• •• •• •• •• • YX001U ••••• •• •• •• •• YX0082 •• •• •• •• • YX00AX •• •• •• •• • YX0113 ••••• •• •• •• • YX011C •• •• •• •• •• YX01IU ••••• •• •• •• •• Y141XX •• •• •• •• • YX0812 •• •• •• • Y190XX •• •• •• • KEYING KEYING OPTION CODE NO. CODE NO. CODE KEYING OPTIONS ON KEY ON LOCK 2 NICKEL PLATED BRASS KEYS 2 YES NO (4 & 5 TUMBLER) or 2 DIE CAST CHROME PLATED ZINC ALLOY KEYS (6 TUMBLER) 2 NICKEL PLATED BRASS KEYS, 4 & 5 YES YES 6 TUMBLER ONLY NOTE: All orders keyed alike, standard. For more than one key code, master keying, replacement keys, or other special features, consult Customer Service Center. L NOTE: Keys are available separately, see page L-10. Key head shape subject to change without notice. LOCK TYPE C 4 TUMBLER LOCK WITH DETENT V 6 TUMBLER TUBULAR LOCK A 4 TUMBLER LOCK (MOMENTARY MODELS ONLY) B 5 TUMBLER LOCK . Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–6 Switchlock Switchlock Y Series 4, 5 & 6 Tumbler Switchlocks LOCK TYPE SHORT ANTI-STATIC LOCK TYPES R  4 TUMBLER LOCK WITH DETENT AND W  6 TUMBLER TUBULAR LOCK WITH SHORT ANTI-STATIC SWITCH. ANTI-STATIC SWITCH Available with Lock Finish '2' only. NOTE: For available option combinations, see page L-9. U.S. Pat. No. 4,639,562 Exceeds 20 KV DC static resistance @ sea level, lock body to terminals. LOCK FINISH 2  STAINLESS STEEL 8  GLOSS BLACK F  POLISHED NICKEL Available with Lock Types ‘V’ & ‘W’ only. NOTE: For available option combinations, see page L-9. TERMINATIONS 03  SOLDER LUG WITH HOLE 01  SOLDER LUG WITH NOTCH 02  PC THRU-HOLE WC  WIRE LEAD L Black wire standard. other colors and lengths available, consult Customer Service Center. UL style 1015. All Models Except Y190 02  PC THRU-HOLE 07  SOLDER LUG WITH HOLE WC  WIRE LEAD PC MOUNTING Black wire standard. other colors and lengths available, consult Y190 Model Only Customer Service Center. UL style 1015. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–7 0 4 5 6 3 6 5 Y Series 4, 5 & 6 Tumbler Switchlocks MOUNTING/LOCK STYLE .136 DIA. N  WITH NUT D  WITH CLIP (3,45) PANEL MOUNTING .105 (2,67) 3/4±24 UNS .470 (11,94) 1.000 .875 (25,40) (22,23) GRAIN .225 .500 (5,72) (12,70) DIRECTION BURR SIDE UP o 1.010 .688 (25,65) (17,46) 1.047 .965 .125 thk. (26,59) .468 (24,51) (3,18) (11,88) MOUNTING OPTION STYLE PANEL THICKNESS CODE Nut part number: 937C00000 .034 WITH NUT .085-.105 (2,16-2,67) N .655 (0,86) (16,62) .100 WITH CLIP .085-.105 (2,16-2,67) D (2,54) Clip part number: 906B00000 R  REMOVABLE DRESS NUT PANEL MOUNTING LOCK DIMENSIONS DIMENSIONS ‘A’ LOCK TYPES .270 (6,68) A, N TYPICAL INSTALLATION .360 (9,14) C, R Install hex nut with enough clearance to allow for dress nut and panel. Place switch through cutout in rear of panel. Install and tighten dress nut by hand, then tighten hex nut. Always tighten assembly with back of panel hex nut to avoid damaging front of panel. L NOTE: Removable dress nut not available with Y1900A or Y100AA model options. L  REMOVABLE DRESS NUT WITH LATCH PAWL PANEL MOUNTING Latch pawl shown in pos. 1. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–8 N T a P S U Switchlock Switchlock Y Series 4, 5 & 6 Tumbler Switchlocks MOUNTING/LOCK STYLE Mounting Information (All Models) PANEL THICKNESS MOUNTING STYLES A, B LOCK TYPES C, R LOCK TYPES V, W LOCK TYPES D .065-.085 (1, 65-2, 16) .085-.105 (2, 16-2, 67) N .105 (2, 67) max. .195 (4, 95) max. .215 (5, 46) max. L .215 (5, 46) max. – R .125 (3, 18) max. .215 (5, 46) max. – AVAILABLE OPTION COMBINATIONS LOCK FINISHES LOCK TYPES MOUNTING MOUNTING STYLES 28 FA B C RV W D •• •• • •••• N •• •• • •••• R •• • •• L •• • • CONTACT MATERIAL CONTACT AND OPTION RoHS RoHS RATING COMPLIANT* COMPATIBLE* TERMINAL MATERIAL CODE 4 AMPS @ 125 V AC or 28 V DC; 2 Q YES YES SILVER POWER 2 AMPS @ 250 AC V AC (UL/CSA). 1 B YES YES LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @ 20 V AC or DC MAX GOLD LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC 3 G YES YES GOLD SILVER OR POWER or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA) * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 All models with all options when ordered with ‘G’ or ‘Q’ contact material. CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. 2 CONTACTS & TERMINALS: Copper, silver plated (std. with all termination options). 3 CONTACTS & TERMINALS: Copper, with gold plate over silver plate. L SEAL E  EPOXY SEAL NONE  NO SEAL EPOXY .075 MAX. (1,91) Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–9 Y Series 4, 5 & 6 Tumbler Switchlocks AVAILABLE HARDWARE Key Code: A126 Key Code: D001 4 TUMBLER 5 TUMBLER PART NO. (ONE KEY) PART NO. (ONE KEY) Key Code: AAAA 115140126 115441001 PART NO. (ONE KEY) Material: Zinc alloy Material: Brass Material: Brass Finish: Chrome plate 363C1AAAA Finish: Nickel plate Finish: Nickel plate L Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–10 Switchlock