C&K YF01132C203NQ
Specifications
Manufacturer
C&K
Manufacturers Part #
YF01132C203NQ
Lead Time
12 Week Lead Time
Industry Aliases
YF0113-2-C-203-N-Q
Sub-Category
KeyLock Switches
Series
YF
Factory Pack Quantity
1
Datasheet
Extracted Text
Switchlock YF Series 4 Tumbler Miniature Switchlocks Features/Benefits Typical Applications • Multi-pole and multi-position • Computer servers • Positive detent • Point-of-sale terminals • Low level and power capability • Cash registers Models Available Specifications Materials CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or LOCK: Zinc alloy with stainless steel facing. 4 tumbler, 28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page L-14 for single bitted lock with integral detent mechanism. additional ratings. KEYS: Two nickel plated brass keys with code number. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. SWITCH HOUSING: 6/6 Nylon (UL 94V-2). CONTACT RESISTANCE: Below 10 m Ω typ. initial @ CONTACTS & TERMINALS: Q contact material: Copper, silver plated. 2-4 V DC, 100 mA, for both silver and gold plated contacts. See page L-14 for additional contact materials. 9 INSULATION RESISTANCE: 10 Ω min. MOUNTING NUT: Brass, bright zinc plated. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. TERMINAL SEAL: Epoxy. INDEXING: 90º:2 positions max. NOTE: Any models supplied with Q or B contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switchlocks with standard options. For information on specific and custom switchlocks, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L–12 through L–14. For additional options not shown in catalog, consult Customer Service Center. Switch and Lock Function YF0113 SP, 90° Index, keypull pos. 1 Keying YF2113 DP, 90° Index, keypull pos. 1 2 Two nickel plated brass keys YF011U SP, 90° Index, keypull pos. 1 & 2 YF211U DP, 90° Index, keypull pos. 1 & 2 Lock Type L C 4 Tumbler, single bitted lock with detent Lock Finish 2 Stainless steel facing 8 Gloss black facing Terminations 03 Solder lug with hole WC Wire lead Mounting Style N With nut Contact Material Q Silver B Gold Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–11 YF Series 4 Tumbler Miniature Switchlocks SWITCH AND LOCK FUNCTION SINGLE& DOUBLE POLESWITCHES CONNECTED TERMINALS NO. MODEL KEY PULL LOCK TERMINAL NUMBERS POS. 1 POS. 2 POS. 3 POLES NO. POSITIONS CONFIGURATION INDEXING POS. 1 YF0113 SP 8-1 1-3 Position 1 DP 8-1, 4-5 1-3, 5-7 YF2113 2 90º POS. 1 SP YF011U 8-1 1-3 Positions 1 & 2 DP 8-1, 4-5 1-3, 5-7 2 YF211U Terminal numbers molded on bottom of housing. All models with all options when ordered with ‘Q’ contact material. LEGEND = Detent Positions (45º or 90º ) = Key pull possible in these positions. = Stop Positions 0029 TERMINAL NUMBERS MOLDED ON HOUSING Part number shown: YF01132C203NQ L KEYING 2 TWO NICKEL PLATED BRASS KEYS 1.435 .174 (36,44) (4,19) 0029 .548 (13,91) .772 (19,6) Key Part Number: 960B10029 NOTE: All orders keyed alike with code number on key. For more than one key code, replacement keys, or other special features, consult Customer Service Center. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–12 Switchlock Switchlock YF Series 4 Tumbler Miniature Switchlocks LOCK TYPE C 4 TUMBLER, SINGLE BITTED LOCK WITH DETENT LOCK FINISH 2 STAINLESS STEEL FACING 8 GLOSS BLACK FACING TERMINATIONS 03 SOLDER LUG WITH HOLE WC WIRE LEAD L Black wire standard, other colors and lengths available, consult Customer Service Center. UL style 1015. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–13 YF Series 4 Tumbler Miniature Switchlocks MOUNTING STYLE Switch and Lock Assembly Instructions N WITH NUT PANEL MOUNTING LOCK MUST BE IN PANEL BEFORE ATTACHING SWITCH BASE SWITCH BASE KEY SHOWN IN POSITION ONE .472 DIA. (11,99) .420 (10,67) ALIGN TAB WITH SLOT Nut part number: 1790901A47 4 TUMBLER LOCK AND SNAP TOGETHER Panel thickness: .300 (7,62) max. NOTE: Switch installation is permanent. Switch cannot be removed from lock after assembly. Attempts to separate switch and lock may damage switch. CONTACT MATERIAL CONTACT AND RoHS RoHS OPTION RATING COMPLIANT* COMPATIBLE* TERMINAL MATERIAL CODE 2 Q YES YES SILVER POWER 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA). 1 B YES YES GOLD LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @ 20 V AC or DC MAX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. All models with all options when ordered with ‘Q’ contact material. 1 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. 2 CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). AVAILABLE HARDWARE L Key Code: 0029 PART NO. (ONE KEY) Material: Brass Finish: Nickel plate 960B10029 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com L–14 Switchlock
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the YF01132C203NQ?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods