C&K ZMSH03130P00PSC

Snap-acting ZMS Series Subminiature Snap-acting Switches (IP65) Features/Benefits Typical Applications • Reliable snap-acting mechanism • PCB detection switch • Long electrical and mechanical life • Communication devices • Compact size—Ideal when space is limited • Testing equipment • Various PCB terminals and actuators • Security/Alarm systems • RoHS compatible • Consumer electronics • IP67 with potted wires only UL61058-1 14 UL1054 Specifications Materials CONTACT RATING: 3A@ 125 V AC/ 3A@ 12 V DC, 0.01A @ 12 V DC CASE: Nylon ELECTRICAL LIFE: 100,000 cycles @ 0.01A 12V DC COVER/ACTUATOR: PBT 100,000 cycles @ 3A 12 V DC MOVABLE CONTACTS: 3 Amp silver alloy, 0.01A gold plating over silver alloy 6,000 cycles @ 3A 125 V AC STATIONARY CONTACTS: 3 Amp silver alloy, 0.01 A gold plating MECHANICAL LIFE: 500,000 cycles over silver alloy INSULATION RESISTANCE: 100 M ohm min. TERMINALS: Brass, silver plated DIELECTRIC STRENGTH: 500 Vrms. LEVER: Stainless steel OPERATING TEMPERATURE: -40˚C + 85˚C. OPERATING FORCE: 130 grams. J * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. NOTE: Specifications and materials listed above are for switches with standard options. @ 20 V AC or DC max. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-58 through J-60. For additional options not shown in catalog, consult Customer Service Center. Z M S Series ZMS SP, Mom. Over Travel H High Travel Electrical Rating L Low Travel 00 0.01 A @ 12 V DC 03 3A 125 V AC 3A 12 V DC Operating Force 130 130 grams / 4.59 Actuator P00 Pin plunger T10 .25 lever Terminations T11 .28 simulated roller P PC Thru-hole L Left form, PC Thru-hole R Right form, PC Thru-hole S Solder type J Wire leads out bottom * K Wire leads out right side * Circuitry W Wire leads out left side * C SPDT Mounting Styles W SPST N.C. * Standard Wire: 20 AWG UL 1007 S Std (No support post) Y SPST N.O. L Support post left R Support post right Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com J–57 ZMS Series Subminiature Snap-acting Switches (IP65) SERIES Z M S ZMSH  HIGH OVER TRAVEL 14,7 Switch option shown: ZMSH00P00SSC () .579 PT 12,2 ø2 () .480 () .079 FP 1,7 OP 8,1 () .067 7,5 () .319 () .295 0,5 NC NO COM () .020 2,5 () .10 2,8 () .110 4,13 4,13 () .163 () .16 5,4 () .213 14,7 Ø 2 () .579 PT ZMSL  LOW OVER TRAVEL () .079 12,2 Switch option shown: ZMSL00P00PSC () .480 FP 9,05 OP 7,5 () .356 () .295 0,5 ±0,05 () .020 ±.001 NC NO COM 2,8 J 2,5 () .110 () .098 5,4 0,6 ±0,1 () .213 () .024 ±.003 5,08 5,08 () .200 () .200 ELECTRICAL RATING CONTACT MATERIAL UL61058-1 ENEC UL1054 OPTION CODE MOVABLE CONTACT / STATIONARY CONTACT ELECTRICAL RATING ELECTRICAL RATING 0.01 AMP @ 12 V DC 00 Gold plating over silver alloy 10m AMP @ 12 V DC 5E5 0.1 AMP @ 12 V DC 3 AMPS @ 125 V AC 3 AMPS @ 12 V DC 1E5 03 Silver alloy 3 AMPS @ 12 V DC Consult Customer Service center for availability and delivery of nonstandard ratings. OPERATING FORCE BASIC SWITCH OPERATING FORCE OPTION CODE (OZ./GRAMS) 130 130 4.59 Third Angle Projection Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com J–58 Snap-acting Snap-acting ZMS Series Subminiature Snap-acting Switches (IP65) ACTUATOR P00  PIN PLUNGER (IP65) T10  .25 LEVER (IP65) T11   LEVER (IP65) 14,7 18,6 () .579 () .7323 14,7 () .579 14,7 PT 12,2 () .5787 12,2 () .480 PT () .480 PT 12,2 () .4803 FP OP FP OP FP OP 9,05 () .3563 approved SWITCH CHARACTERISTICS Low High Actuator Maximum Operate Minimum Release Free Position Maximum Operate Maximum Overtravel Overtravel code Force (grams/oz.) Force (grams/oz.) Max Pre-travel Position Differential min. (H) min. (L) 0.068 130 13 .472 0.032 .415 ± .012 .012 0.031 P00 (1,72) (12) 4.59 0.45 (0,8) (10.55 ± .3) (0.3) (0,8) 0.084 195 55 .604 0.152 .440 ± .020 0.020 0.053 T10 (2,14) 1.93 (15.35) (3.85) (0,5) (1,35) 6.88 (11.2 ±.5) J 0.101 .539 ± .032 160 45 .726 0.186 0.030 0.062 T11 (2,57) 1.58 (18.45) (4.8) (13.7 ± .8) (0,7) (1,65) 5.64 P00  PIN PLUNGER (IP67) T10  .25 LEVER (IP67) T11   .28 LEVER (IP67) 18,6 14,7 () .7323 () .579 14,7 () .579 PT 14,7 PT () .5787 12,2 12,2 () .480 () .480 PT 12,2 () .4803 FP OP FP OP OP FP Gray Blue Black NC (NO) (COM) SWITCH CHARACTERISTICS “J” TERMINATION ONLY High Low Actuator Maximum Operate Minimum Release Free Position Maximum Operate Maximum Overtravel Overtravel code Force (grams/oz.) Force (grams/oz.) Max Pre-travel Position Differential min. (H) min. (L) .593 ± .020 .012 0.068 130 13 .650 0.032 0.031 P00 4.59 0.45 (16.50) (0,8) (15.05 ± 0.5) (0.3) (0.8) (1,72) 195 55 .781 0.152 .618 ± .028 0.020 0.053 0.084 T10 (2,14) 6.88 1.93 (19.85) (3.85) (15.7 ± .7) (0.5) (1.35) 160 45 .904 0.188 .717 ± .039 0.030 0.101 0.062 T11 1.58 (22.95) (4.8) (0.7) (2,57) 5.64 (18.2 ± 1.0) (1.65) Dimensions are shown: mm (inch) Specifications and dimensions subject to change www.ckswitches.com J–59 ZMS Series Subminiature Snap-acting Switches (IP65) TERMINATIONS L  LEFT FOOTED, PC THRU-HOLE P  PC THRU-HOLE PC MOUNT (2) 2.5 holes (.098) 9.53 (.375) 5.85 (0.230) 0.23 (.010) 0,6± 0,1 0,5±0,05 2,5 () .024±.003 () .020±.001 () .098 5.08 2,8 (.200) 5,08 5,08 0,5 () .110 0,6 10.16 () .200 () .200 () .0197 1,35/1,50 To center 2,05 () .0236 (.400 ) 2,8 (.053) (.059) of terminal () .081 5,08 5,08 () .1102 () .2000 (3) 1.35 to 1.50 holes () .2000 2,85 (.053) to (.059) () .1122 5,08 5,08 (.200) (.200) PC MOUNTING HOLE 304,8 R  RIGHT FOOTED, PC THRU-HOLE (12.00) J WIRE LEADS BOTTOM K  RIGHT SIDE PC MOUNT (IP67) (IP67) (2) 2.5 holes 9.53 (.098) 5 (.375) () .197 GREY (NC) 5.85 0.23 (0.230) 2,05 (.010) () .081 To center 3.17 of terminal 12.0 (0.125) 12 5.08 (472) 0,5 (.200) STRIP ENDS () .020 (.472) J 2,8 304.8 10.16 () .110 (12.00) 2,85 (.400) 5,4 Black Blue Grey () .112 (3) 1.35 to 1.50 holes 3.17 () .213 BLUE (NO) (COM) (NO) (NC) (.053) to (.059) (.125) Strip Ends BLACK (COM) 304,8 S  SOLDER TYPE W  LEFT SIDE (12.00) (IP67) Standard Wire: 20 AWG UL 1007 GREY (NC) 1,7 3,17 () .067 (0.125) 12 STRIP ENDS (.472) 0,5 () .0197 2,5 2,8 () .098 () .1102 4,13 4,13 BLUE (NO) () .163 () .163 BLACK (COM) MOUNTING STYLES R  SUPPORT POST RIGHT S  STD (NO SUPPORT POST) L  SUPPORT POST LEFT 5 2X 5 () .197 () .197 2.60 ø2.60 (.102) (1,02) CIRCUITRY C  SPDT (Single Pole, Double Throw) W  SPST, NC (Single Pole, Single Throw, Normally Closed) Y  SPST, NO (Single Pole, Single Throw, Normally Open) Third Angle Projection Dimensions are shown: mm (inch) Specifications and dimensions subject to change www.ckswitches.com J–60 Snap-acting