CARLING TECHNOLOGIES BF1-BO-46-615-11A-KG

B-Series Circuit Breaker The B-Series hydraulic/magnetic circuit breakers are compact and temperature stable designed for precision operation in OEM markets requiring general purpose as well as full load amp applications. These circuit breakers are designed specifically for world market applications requiring extra insulation and tongue & groove half- shell constructions. Actuators available include handle for 1- 6 poles, rocker for 1-3 poles, and Visi-Rocker for 1-3 poles construction. They are also offered with ratings from 0.02 to 50 amps and up to 277VAC or 80VDC, with choices of time delays, terminals, wide range of standard colors, imprinting. Additional Features: Š Meet CSA Standard 22.2 No. 100 for the Generator & 1 POLE 2 POLE Welder markets Š Extra insulation and tongue & groove half-shell constructions Applications: Agency Certifications: Š Š Power Supplies UL Recognized – UL Standard 508, 1077, 1500 Š Š Medical Equipment UL Listed – UL Standard 489, 489A Š Š Generator & Welder Markets CSA Accepted Š Š Office Equipment TUV Certified Š Š Control Panels VDE Certified Š Marine Š Military Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: sales@carlingtech.com • www.carlingtech.com | 2 B-Series Circuit Breaker - General Specifications Electrical Mechanical Endurance 6,000 ON-OFF operations @ 6 per Maximum Voltage 277VAC 50/60 Hz, 80VDC Current Ratings Standard current coils: 0.100, 0.250, minute; with rated Current and 0.500, 0.750, 1.00, 2.50, 5.00, 7.50, Voltage. Additional 4,000 ON-OFF 10.0, 15.0, 20.0, 25.0, 30.0, 35.0, mechanical Trip Free All B-Series Circuit Breakers will trip 40.0 and 50.0 amps. Other ratings on overload, even when Handle is available, see ordering scheme. Standard Voltage Coils DC - 6V, 12V; AC - 120V, other ratings forcibly held in the ON position. available, see ordering scheme. Trip Indication The operating Handle moves Auxiliary Switch Rating SPDT; 10.1 AMPS - 250VAC,1.0A 65 positively to the OFF position when an overload causes the breaker to trip. VDC or 0.5A 80 VDC, 0.1 Amps - 125VAC (with gold contacts). Physical VDE-1.0 Amp - 125VAC. Insulation Resistance Minimum of 100 Megohms at 500 Number of Poles 1 - 6 poles at 30 Amps or less. 1 and 2 VDC. poles at 31 Amps thru 50 Amps. Dielectric Strength UL, CSA - 1500 V 50/60 Hz for one Internal Circuit Config. Series, (with or without auxiliary minute between all electrically isolated switch), Shunt and Relay with current terminals. B-Series circuit breakers or voltage trip coils, Dual Coil, Switch comply with the 8mm spacing Only (with or without auxiliary switch). and 3750V 50/60 Hz dielectric Weight Approximately 65 grams/pole. requirements from hazardous voltage (Approximately 2.32 ounces/pole) to operator accessible surfaces, Standard Colors Housing - Black; Actuator- See between adjacent poles and from Ordering Scheme. main circuits to auxiliary circuits per Publications EN 60950 and VDE 0805. Environmental Resistance, Impedance Values from Line to Load Terminal - Designed and tested in accordance with requirements of based on Series Trip Circuit Breaker. specification MIL-PRF-55629 & MIL-STD-202 as follows: RESISTANCE PER POLE VALUES from Line to Load Terminals Shock Withstands 100 Gs, 6ms, sawtooth while (Values Based on Series Trip Circuit Breaker) carrying rated current per Method 213, Test Condition “I”. Instantaneous and ultra-short curves tested @ 90% of rated current. Vibration Withstands 0.060” excursion from 10- 55 Hz, and 10 Gs 55-500 Hz, at rated current per Method 204C, Test Condition A. Instantaneous and ultrashort curves tested at 90% of rated current. Moisture Resistance Method 106D; ten 24-hour cycles @ + 25°C to +65°C, 80-98% RH.56 days @ +85°C, 85% RH. Salt Spray Method 101, Condition A (90-95% RH @ 5% NaCl Solution, 96 hrs). Thermal Shock Method 107D, Condition A (Five cycles Pulse Tolerance Curves @ -55°C to +25°C to +85°C to +25°C). Operating Temperature -40°C to +85°C. *Manufacturer reserves the right to change product specification without prior notice. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | B-Series Circuit Breaker - General Specifications 3 Electrical Tables Table A: Lists UL Recognized & CSA Certified configurations and performance capabilities as a Component Supplementary Protector. Notes: 1 Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse (15A minimum) at no more than 4 times the rating of the protector. 2 Same as note 1, except that backup fuse is limited to 80A maximum. 3 2 pole protector required (with one pole per power line) for: 250/125 VAC, 125/250 VAC and 208Y/120 VAC Power Systems. 1 pole protector required for : 125 VAC, 1Ø Power System. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 4 B-Series Circuit Breaker - General Specifications Electrical Tables Table B: Lists UL Recognized, CSA, VDE & TUV Certified configurations & performance capabilities as a Component Supplementary Protector. Notes: 1 General Purpose Ratings for UL/CSA Only. 2 Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse (15A minimum) at no more than 4 times the rating of the protector. 3 Same as note 1, except that backup fuse is limited to 80 A maximum. Table C: Lists UL Recognized, CSA Certified configurations and performance capabilities as Protectors, Supplementary for Marine Electrical and Fuel Systems (CCN/Guide PEQZ2, File E75596). Ignition Protected per UL 1500. UL Classified Small Craft Electrical Devices, Marine in accordance with ISO 8846 (CCN/Guide UZMK, File MQ1515) as Marine Supplementary Protectors. Notes: 1 Available with special catalog number only (consult factory). 2 2 pole protector required (with one pole per power line) for: 250/125 VAC, 125/250 VAC and 208Y/120 VAC Power Systems. 1 pole protector required for : 125 VAC, 1Ø Power System. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | B-Series Circuit Breaker - General Specifications 5 Table D: Lists UL Listed configurations and performance capabilities as Circuit Breakers for use in Communications Equipment (CCN/Guide DITT, File E189195), under UL489A Notes: 1 Parallel Pole Construction Table E: Lists UL Listed (489) configuration and performance capabilities as a Molded Case Circuit Breaker. B SERIES TABLE E : UL489 LISTED BRANCH CIRCUIT BREAKERS VOLTAGE INTERRUPTING CURRENT RATING CAPACITY (AMPS) CIRCUIT CONSTRUCTION NOTES CONFIGURATION MAX. RATING FREQUENCY PHASE WITHOUT BACKUP FULL LOAD AMPS FUSE 1 Pole 120 50 / 60 10.10 - 30 5,000 SERIES 120 / 240 50 / 60 10.10 - 30 5,000 2 Poles 120 / 240 50 / 60 10.10 - 30 5,000 2 or 3 Poles (1 Pole of a 3 Pole Unit is for Neutral Break) 1 Pole 120 50 / 60 10.10 - 30 5,000 SHUNT TRIP 120 / 240 50 / 60 10.10 - 30 5,000 2 Poles DUAL COIL 120 / 240 50 / 60 10.10 - 30 5,000 2 or 3 Poles (1 Pole of a 3 Pole Unit is for Neutral Break) Agency Certifications UL Recognized CSA Accepted Component Supplementary Component Recognition Program Protector under Class 3215 30, UL Standard 1077 as Protectors Supplementary FIle 047848 0 000 CSA (Guide CCN/QVNU2, File E75596) Standard C22.2 No. 235 UL Standard 508 Switches, Industrial Control TUV Certified EN60934, under License No. (Guide CCN/NRNT2, File E148683) R72040875 UL Standard 1500 Protectors, Supplementary for Marine Electrical & Fuel Systems VDE Certified EN60934, VDE 0642 under File (Guide PEQZ2, File E75596) No. 10537 Ignition Protection UL Listed UL Standard 489 Circuit Breakers, Molded Case, (Guide DIVQ, File E129899) UL Standard 489A Communications Equipment (Guide CCN/DITT, File E189195) 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 6 B-Series Handle UL Recognized – Ordering Scheme B A 3 — B 0 — 10 — 450 — 1 B 1 — C 1 2 3 4 5 6 7 8 9 10 11 Series Actuator Poles Circuit Aux/Alarm Frequency Current Rating Terminal Actuator Mounting/ Agency Color Barriers Approval Switch & Delay 1 SERIES 7 CURRENT RATING (AMPERES) CODE AMPERES B 020 0.020 225 0.250 420 2.000 611 11.000 025 0.025 230 0.300 522 2.250 711 11.500 030 0.030 235 0.350 527 2.750 612 12.000 2 ACTUATOR 035 0.035 240 0.400 430 3.000 712 12.500 A Handle, one per pole 040 0.040 245 0.450 435 3.500 613 13.000 B Handle, one per multipole unit 045 0.045 250 0.500 440 4.000 614 14.000 S Mid-Trip Handle, one per pole 050 0.050 255 0.550 445 4.500 615 15.000 T Mid-Trip Handle, one per pole & Alarm Switch 055 0.055 260 0.600 450 5.000 616 16.000 060 0.060 265 0.650 455 5.500 617 17.000 065 0.065 270 0.700 460 6.000 618 18.000 3 POLES 070 0.070 275 0.750 465 6.500 620 20.000 1 One 3 Three 5 Five 075 0.075 280 0.800 470 7.000 622 22.000 2 Two 4 Four 6 Six 080 0.080 285 0.850 475 7.500 624 24.000 085 0.085 290 0.900 480 8.000 625 25.000 090 0.090 295 0.950 485 8.500 630 30.000 8 3 095 0.095 410 1.000 490 9.000 635 35.000 4 CIRCUIT G Relay Trip (Voltage) 8 2 3,4 210 0.100 512 1.250 495 9.500 640 40.000 A Switch Only (No Coil) H Dual Coil with Shunt Trip 8 215 0.150 415 1.500 610 10.000 645 45.000 B Series Trip (Current) Voltage Coil 8 220 0.200 517 1.750 710 10.500 650 50.000 3,4 C Series Trip (Voltage) H Dual Coil with Shunt Trip 6 3 OR VOLTAGE COIL (NORMAL RATED VOLTAGE) D Shunt Trip (Current) Voltage Coil (side terminal) A06 6 DC A32 32 DC J12 12 AC J65 65 AC 3 3,4 E Shunt Trip (Voltage) K Dual Coil with Relay Trip A12 12 DC A48 48 DC J18 18 AC K20 120 AC 3 F Relay Trip (Current) Voltage Coil A18 18 DC A65 65 DC J24 24 AC L40 240 AC A24 24 DC J06 6 AC J48 48 AC 5 5 AUXILIARY/ALARM SWITCH 5 S.P.S.T., 0.093 Q.C. Term. 9 0 w/o Aux Switch (Gold Contacts) 8 TERMINAL 10 1 S.P.D.T., 0.093 Q.C. Term. 6 S.P.S.T., 0.139 Solder Lug 1 Push-On 0.250 Tab (Q.C.) G Screw M5 (Bus Type) 2 S.P.D.T., 0.110 Q.C. Term. 7 S.P.S.T., 0.110 Q.C. Term. 2 Screw 8-32 w/upturned lugs and 30° bend 11 3 S.P.D.T., 0.139 Solder Lug (Gold Contacts) 3 Screw 8-32 (Bus Type) H Screw M5 (Bus Type) 4 Screw 10-32 w/upturned lugs J Screw M5 Back Connect 4 S.P.D.T., 0.110 Q.C. Term. 8 S.P.S.T., 0.187 Q.C. Term. 11 5 Screw 10-32 (Bus Type) K Screw 10-32 Back Connect (Gold Contacts) 9 S.P.D.T., 0.187 Q.C. Term. 12 6 Screw 8-32 w/upturned lugs L 0.250 Q.C./ Solder Lug 11 and 30° bend M M6 Threaded Stud 7 Screw 8-32 (Bus Type) and N Screw M4 Back Connect 6 FREQUENCY & DELAY 13 30° bend P Printed Circuit Board 2 03 DC 50/60Hz, Switch Only 30 DC, 50/60Hz Instantaneous 8 Screw 10-32 w/upturned lugs Terminals 6 10 DC Instantaneous 31 DC, 50/60Hz Ultra Short 16 and 30° bend Q Push-In Stud 11 DC Ultra Short 32 DC, 50/60Hz Short 9 Screw 10-32 (Bus Type) and R Screw M4 w/upturned lugs 12 DC Short 34 DC, 50/60Hz Medium 30° bend and 30° bend 15 14 DC Medium 36 DC, 50/60Hz Long B Screw M5 w/upturned lugs S Push-On 0.110 Tab (Q.C.) 7 16 DC Long 42 50/60Hz Short, Hi-Inrush C Screw M4 w/upturned lugs T Screw M4 (Bus Type) 6 7 11 20 50/60Hz Instantaneous 44 50/60Hz Medium, Hi-Inrush E Screw M4 (Bus Type) and 30° bend 7 21 50/60Hz Ultra Short 46 50/60Hz Long, Hi-Inrush F Screw M5 w/upturned lugs Y Screw 8-32 Back Connect 7 and 30° bend 22 50/60Hz Short 52 DC, Short,Hi-Inrush 7 24 50/60Hz Medium 54 DC, Medium, Hi-Inrush 7 26 50/60Hz Long 56 DC, Long, Hi-Inrush 9 ACTUATOR COLOR & LEGEND Notes: Acuator Color I-O ON-OFF Dual Legend Color White A B 1 Black 1 Actuator Code: Black C D 2 White A: Handle tie pin spacer(s) and retainers provided unassembled with multi-pole units. Red F G 3 White B: Handle location as viewed from front of breaker: Green H J 4 White 2 pole - left pole 3 pole - center pole Blue K L 5 White 4 pole - two handles at center poles 5 pole - three handles at center poles 6 pole - four handles at center poles Yellow M N 6 Black S: Handle moves to mid-position only upon electrical trip of the breaker. Available with circuit Gray P Q 7 Black codes B, C, D, E, F, G, H and K. Orange R S 8 Black T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the breaker. Available with circuit codes B & C. 2 Switch Only circuits, rated up to 50 amps and 6 poles, and only available with VDE Certification 10 MOUNTING/BARRIERS when tied to a protected pole (Circuit Code B, C, D or H.), For .02 to 30 amps, select Current MOUNTING STYLE BARRIERS Code 630. For 35 - 50 amps, select Current Code 650. Threaded Insert, 2 per pole 3 Available with Terminal Codes 1, 2 and 3. Current Rating limited to 30 amps maximum. 1 6-32 x 0.195 inches no 4 Consult factory for available Dual Coil options, as special catalog number is required. With A 6-32 x 0.195 inches (multi-pole units only) yes Shunt construction, Dual Coils will trip instantaneously on line voltage. Dual coils require 30VA 2 ISO M3 x 5mm no minimum power to trip and are rated for intermittent duty only. B ISO M3 x 5mm yes 5 Auxiliary Switch breakers with Series Trip and Switch Only circuits. On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole. Rectangular Adapter Plate with mounting centers of 2.062 inches 6 Separate pole type voltage coils not rated for continuous duty. Available only with delay codes [52.37mm] and Threaded insert, 2 per pole 14 10 and 20. 3 6-32 x 0.225 inches no 14 7 Available with Circuit Codes B & D only. VDE Certified to 30 amps. UL Recognized and CSA C 6-32 X 0.225 inches (multi-pole units only) yes Accepted to 50 amps. 14 4 ISO M3 x 6.5mm no 14 8 VDE Certification available with single pole breakers with DC Delay only. UL Recognition and D ISO M3 x 6.5mm yes CSA Accepted available in one and two pole breakers. Front panel Snap-In, 0.75” [19.05mm] wide bezel 9 Screw Terminals are recommended on ratings greater than 20 amps. Ratings over 30 amps 5 without Handleguard no are only available with Terminal Codes 5, 9, G, H, J, K, M and Q. 6 without Handleguard (multipole only) yes 10 VDE Certification up to 25 amps and UL Recognition and CSA Acceptance up to 30 amps, but Front panel Snap-In, 0.96” wide bezel not recommended over 20 amps. 7 without Handleguard, 1-pole 0.96” wide; no 11 Terminal Codes 3, 5 E and H (Bus Type) with VDE, are supplied with Lock Washers, and multipole units have .105” bezel overhang on all sides Terminal Code M (M6 Threaded Stud) with VDE is supplied with Lock and Flat Washers. 8 without Handleguard, 1-pole 0.96” wide; yes These breakers are only VDE Certified when the washers are used. (multipole only) .105” bezel overhang on all sides 12 VDE Cert. available up to 12 amps. UL Rec. & CSA Acceptance available up to 30 amps. 13 Single pole breakers with Terminal Code P (Printed Circuit Board) are available up to 30 amps with VDE Certification and 50 amps with UL Recognition and CSA Acceptance, with Circuit Codes A, B and C. Two pole breakers with Terminal Code P (Printed Circuit Board) are 11 AGENCY APPROVAL available up to 40 amps with UL Recognition and CSA Acceptance with Circuit Codes A, B and C. C UL Recognized & CSA Accepted 14 Available with Actuator Codes A, S and T. D VDE Certified, UL Recognized & CSA Accepted 15 Available with voltage coils only. E TUV Certified, UL Recognized & CSA Accepted 16 Terminal Code Q not available with VDE approvals. I UL Rec. STD 1077, UL Rec. 1500 (ignition protected), & CSA Accepted 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | B-Series Handle UL489A – Ordering Scheme 7 B A 1 — B 0 — 14 — 450 — 1 B 1 — M T 1 2 3 4 5 6 7 8 9 10 11 12 Series Actuator Poles Circuit Aux/Alarm Frequency Current Rating Terminal Actuator Mounting/ Max. Appl. Agency Color Barriers Rating Approval Switch & Delay 1 SERIES 9 ACTUATOR COLOR & LEGEND B Acuator Color ON-OFF Dual Legend Color White B 1 Black Black D 2 White 1 2 ACTUATOR Red G 3 White A Handle, one per pole Green J 4 White B Handle, one per multipole unit Blue L 5 White S Mid-Trip Handle, one per pole Yellow N 6 Black T Mid-Trip Handle, one per pole & Alarm Switch Gray Q 7 Black Orange S 8 Black 2 3 POLES 1 One 3 Three 10 MOUNTING/BARRIERS 2 Two 4 Four MOUNTING STYLE BARRIERS Threaded Insert, 2 per pole 1 6-32 x 0.195 inches no 4 CIRCUIT A 6-32 x 0.195 inches (multi-pole units only) yes B Series Trip (Current) 2 ISO M3 x 5mm no B ISO M3 x 5mm yes Rectangular Adapter Plate with mounting centers of 2.062 inches 2 5 AUXILIARY/ALARM SWITCH [52.37mm] and Threaded insert, 2 per pole 0 w/o Aux Switch 7 S.P.S.T., 0.110 Q.C. Term. 3 6-32 x 0.225 inches no 1 S.P.D.T., 0.093 Q.C. Term. (Gold Contacts) C 6-32 X 0.225 inches (multi-pole units only) yes 2 S.P.D.T., 0.110 Q.C. Term. 8 S.P.S.T., 0.187 Q.C. Term. 4 ISO M3 x 6.5mm no 3 S.P.D.T., 0.139 Solder Lug 9 S.P.D.T., 0.187 Q.C. Term. D ISO M3 x 6.5mm yes Front panel Snap-In, 0.75” [19.05mm] wide bezel 5 without Handleguard no 4 6 FREQUENCY & DELAY 6 without Handleguard (multipole only) yes 11 DC Ultra Short 52 DC, Short,Hi-Inrush Front panel Snap-In, 0.96” wide bezel 12 DC Short 54 DC, Medium, Hi-Inrush 7 without Handleguard, 1-pole 0.96” wide; no 14 DC Medium 56 DC, Long, Hi-Inrush multipole units have .105” bezel overhang on all sides 16 DC Long 8 without Handleguard, 1-pole 0.96” wide; yes (multipole only) .105” bezel overhang on all sides 7 CURRENT RATING (AMPERES) CODE AMPERES 11 MAXIMUM APPLICATION RATING 210 0.100 285 0.850 455 5.500 613 13.000 M 80 DC 215 0.150 290 0.900 460 6.000 614 14.000 220 0.200 295 0.950 465 6.500 615 15.000 225 0.250 410 1.000 470 7.000 616 16.000 12 AGENCY APPROVAL 230 0.300 512 1.250 475 7.500 617 17.000 T UL489A LISTED 235 0.350 415 1.500 480 8.000 618 18.000 K UL489A LISTED, VDE CERTIFIED 240 0.400 517 1.750 485 8.500 620 20.000 J UL489A LISTED, TUV CERTIFIED 245 0.450 420 2.000 490 9.000 622 22.000 250 0.500 522 2.250 495 9.500 624 24.000 255 0.550 527 2.750 610 10.000 625 25.000 Notes: 260 0.600 430 3.000 710 10.500 630 30.000 1 Actuator Code: 3 265 0.650 435 3.500 611 11.000 635 35.000 A: Handle tie pin spacer(s) and retainers provided unassembled with multi-pole units. 3 270 0.700 440 4.000 711 11.500 640 40.000 S: Handle moves to mid-position only upon electrical trip of the breaker. 3 275 0.750 445 4.500 612 12.000 645 45.000 T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the 3 280 0.800 450 5.000 712 12.500 650 50.000 breaker. 2 On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole. 3 VDE Certification available with single pole breakers only. UL489A Listing available with one and two pole breakers. 4 8 TERMINAL B Screw M5 w/upturned lugs 4 Screw Terminals are recommended on ratings greater than 20 amps. Ratings over 30 amps 5 1 Push-On 0.250 Tab (Q.C.) F Screw M5 w/upturned lugs are only available with Terminal Codes 5, 9, G, H, J, K, M and Q. 2 Screw 8-32 w/upturned lugs and 30° bend 5 Terminal Code 1 (Push-On) available up to 25 amps with TUV or VDE Certification and 6 30 amps with UL489A Listing, but is not recommended over 20 amps. 3 Screw 8-32 (Bus Type) G Screw M5 (Bus Type) 6 Terminal Codes 3, 5 and H (Bus Type) with TUV or VDE, are supplied with Lock Washers, 4 Screw 10-32 w/upturned lugs and 30° bend 6 and Terminal Code M (M6 Threaded Stud) with TUV or VDE is supplied with Lock and 5 Screw 10-32 (Bus Type) H Screw M5 (Bus Type) Flat Washers. These breakers are only TUV or VDE Certified when the washers are used. 6 Screw 8-32 w/upturned lugs J Screw M5 Back Connect 7 Single pole breakers with Terminal Code P (Printed Circuit Board) are available up to 30 amps and 30° bend K Screw 10-32 Back Connect with VDE Certification and 50 amps with UL489A Listing. 6 7 Screw 8-32 (Bus Type) and M M6 Threaded Stud 8 Terminal Code Q not available with VDE approvals. 30° bend N Screw M4 Back Connect 7 8 Screw 10-32 w/upturned lugs P Printed Circuit Board Terminals 8 and 30° bend Q Push-In Stud 9 Screw 10-32 (Bus Type) and Y Screw 8-32 Back Connect 30° bend 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 8 B-Series Handle UL489 Listed – Ordering Scheme B A 1 — B 0 — 24 — 450 — 1 B A — K G 1 2 3 4 5 6 7 8 9 10 11 12 Series Actuator Poles Circuit Aux/Alarm Frequency Current Rating Terminal Actuator Mounting/ Max. Appl. Agency Color Barriers Rating Approval Switch & Delay 6 1 SERIES 9 ACTUATOR COLOR & LEGEND B Acuator Color ON-OFF Dual Legend Color White B 1 Black Black D 2 White 1 2 ACTUATOR Red G 3 White A Handle, one per pole Green J 4 White B Handle, one per multipole unit Blue L 5 White S Mid-Trip Handle, one per pole Yellow N 6 Black T Mid-Trip Handle, one per pole & Alarm Switch Gray Q 7 Black Orange S 8 Black 2 3 POLES 3 1 One 2 Two 3 Three 10 MOUNTING/BARRIERS MOUNTING STYLE BARRIERS Threaded Insert, 2 per pole 4 CIRCUIT A 6-32 x 0.195 inches (multi-pole units only) yes B Series Trip (Current) B ISO M3 x 5mm yes Rectangular Adapter Plate with mounting centers of 2.062 inches 7 [52.37mm] and Threaded insert, 2 per pole 4 5 AUXILIARY/ALARM SWITCH C 6-32 X 0.225 inches (multi-pole units only) yes 0 w/o Aux Switch 3 S.P.D.T., 0.139 Solder Lug D ISO M3 x 6.5mm yes 1 S.P.D.T., 0.093 Q.C. Term. 8 S.P.S.T., 0.187 Q.C. Term. Front panel Snap-In, 0.75” [19.05mm] wide bezel 2 S.P.D.T., 0.110 Q.C. Term. 9 S.P.D.T., 0.187 Q.C. Term. 6 without Handleguard (multipole only) yes Front panel Snap-In, 0.96” wide bezel 8 without Handleguard, 1-pole 0.96” wide; yes 6 FREQUENCY & DELAY (multipole only) .105” bezel overhang on all sides 21 AC Ultra Short 42 AC, Short,Hi-Inrush 22 AC Short 44 AC, Medium, Hi-Inrush 24 AC Medium 46 AC, Long, Hi-Inrush 11 MAXIMUM APPLICATION RATING 26 AC Long 8 C 120/240VAC K 120VAC 7 CURRENT RATING (AMPERES) CODE AMPERES 210 0.100 280 0.800 445 4.500 711 11.500 12 AGENCY APPROVAL 215 0.150 285 0.850 450 5.000 612 12.000 G UL489 Listed 220 0.200 290 0.900 455 5.500 712 12.500 3 UL489 Listed, TUV Certified 225 0.250 295 0.950 460 6.000 613 13.000 230 0.300 410 1.000 465 6.500 614 14.000 Notes: 235 0.350 512 1.250 470 7.000 615 15.000 1 Actuator Code: 240 0.400 415 1.500 475 7.500 616 16.000 A: Handle tie pin spacer(s) and retainers provided unassembled with multi-pole units. 245 0.450 517 1.750 480 8.000 617 17.000 B: Handle location as viewed from front of breaker: 250 0.500 420 2.000 485 8.500 618 18.000 2 pole - left pole 3 pole - center pole 255 0.550 522 2.250 490 9.000 620 20.000 S: Handle moves to mid-position only upon electrical trip of the breaker. Available with 260 0.600 527 2.750 495 9.500 622 22.000 circuit codes B, C, D, E, F, G, H and K. 265 0.650 430 3.000 610 10.000 624 24.000 T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the 270 0.700 435 3.500 710 10.500 625 25.000 breaker. Available with circuit codes B & C. 2 All poles must be same polarity. 275 0.750 440 4.000 611 11.000 630 30.000 3 3 pole units available only when 1 of 3 poles is neutral. 4 Auxiliary/Alarm Switch circuit must be same polarity as the main circuit. On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole. 5 8 TERMINAL A Load Terminal: #8 Screw/QC 5 Screw Terminals are recommended on ratings greater than 20 amps. 1 Push-On 0.250 Tab (Q.C.) Combination. (Special Cat.#) 6 Standard actuator colors are black and white. 7 Adapter plate with mounting centers of 2.082 inches. Available with Actuator Codes A, S and T. 2 Screw 8-32 w/upturned lugs B Screw M5 w/upturned lugs 8 Voltage Rating available with 2 and 3-pole breakers only. 3 Screw 8-32 (Bus Type) F Screw M5 w/upturned lugs 9 Barriers supplied on multi-pole units only. 4 Screw 10-32 w/upturned lugs and 30° bend 5 Screw 10-32 (Bus Type) G Screw M5 (Bus Type) 6 Screw 8-32 w/upturned lugs and 30° bend and 30° bend H Screw M5 (Bus Type) 7 Screw 8-32 (Bus Type) and J Screw M5 Back Connect 30° bend K Screw 10-32 Back Connect 8 Screw 10-32 w/upturned lugs M M6 Threaded Stud and 30° bend N Screw M4 Back Connect 9 Screw 10-32 (Bus Type) and Q Push-In Stud 30° bend Y Screw 8-32 Back Connect 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com ON I ON I ON I | B-Series Handle – Circuit & Terminal Diagrams 9 CIRCUITSCHEMATIC CIRCUITSCHEMATIC ANSI IEC ANSI IEC SWITCHONLY(NO COIL) SERIES TRIP SERIES TRIP LINE LINE LINE (3) (2 TERM'S.) LINE (NETZ) (NETZ) MAIN TERM'S. (SEE TABLE A) A O B O C I > LOAD 1.730 [43.94] LOAD LOAD (LAST) LOAD (LAST) SWITCHONLY(NO COIL) SERIES TRIP WITH .520 [13.21] WITH AUXILIARY SWITCH AUXILIARY /ALARM SWITCH LINE LINE (NETZ) (3) SERIES TRIP LINE LINE (NETZ) STD. AUX. SWITCH STD. AUX. SWITCH W AUX SWITCH C (5 TERM'S.) C C C C NO NO NO A 2 B 2 NC NO NO 3 C 3 4 4 I > NC NC NC NC ALARMSWITCH ALARM SWITCH AUX. SWITCH LOAD LOAD (LAST) LOAD LOAD (LAST) TERM'S. SHUNTTRIP DUALCOIL;SERIESTRIP CURRENT COIL, SHUNTTRIPVOLTAGE COIL LINE LINE (NETZ) (3) LINE (NETZ) LINE SHUNT TRIP (3 TERM'S.) SHUNT (NEBENSCHLUSS) D 0 H 0 SHUNT E VOLTAGE I > U > I > COIL LOAD VOLTAGE .390 [9.91] LOAD LOAD (LAST) LOAD (LAST) COIL RELAYTRIP DUALCOIL;SERIESTRIP CURRENT COIL, RELAYTRIPVOLTAGE COIL LINE RELAY LINE (3) LINE VOLTAGE LINE 1 1 (RELAIS) (NETZ) .780 [19.81] RELAY TRIP (NETZ) COIL 1 3 1 (4 TERM'S.) 1 2 2 2 2 LOAD F 0 K 0 RELAY G VOLTAGE I > U > I > 3 3 COIL 3 4 3 4 2 4 4 4 RELAY LOAD LOAD VOLTAGE (LAST) COIL .390 [9.91] RELAY (RELAIS) (LAST) LOAD HANDLEPOSITIONVS.AUX/ALARMSWITCHMODE STANDARD C/B MID TRIP C/B MID TRIP C/B CIRCUIT BREAKER HANDLE POSITION AUX. SWITCH MODE HANDLE POSITION ALARM SWITCH MODE HANDLE POSITION AUX. SWITCH MODE MODE (w/o ALARM SWITCH) 30° 30° 30° OFF NC NO C NC NO C NC NO C ON 30° 30° 30° NC NO C NC NO C NC NO C 30° 90° 90° MID MID ELECTRICAL TRIP TRIP TRIP NC NO CN NC O C NC NO C Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 3 Alarm Switch available with .110 x .020 Q.C. & Solder Lug Terminals Only. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com OFF O OFF O OFF O OFF O CIRCUIT CODE AUX SWITCH CODE CIRCUIT CODE AUX SWITCH CODE | 10 B-Series Handle – Circuit & Terminal Diagrams 1.000[25.40] TERMINALDIMENSIONALDETAIL&RATING .392 [9.97] .205 [5.21] CENTERLINE OF PUSH-IN .360[9.14] .392[9.96] .392[9.96] .344[8.74] .750[19.05] STUD CONTACTAREA .250[6.35] .375[9.53] .375[9.53] .100 [2.54] .250[6.35] .405[10.29] .437 [11.10] .069[1.75]DIA .154 [3.91] DIA .093DIA[.76] .750 [19.05] TAB(Q.C.) UPTURN LUG BUS QC SOLDER LUG BACK CONNECT M6 STUD PUSH-IN STUD #8-32 30 AMP 30 AMP #8-32 30 AMP 50 AMP 50 AMP 30AMP #8-32 30 AMP #10-32 30 AMP #10-32 50 AMP #10-32 50 AMP M5 50 AMP M5 30 AMP M4 30 AMP M4 30 AMP AUXILIARYSWITCHTERMINALDETAIL TABLE A +.002 [+.05] -.000 [-.00] .110 [2.80] .110 [2.80] TIGHTENING TORQUE .161 DIA [Ø 4.10] .051DIA[Ø1.29] SPECIFICATIONS THREAD SIZE TORQUE 7-9IN-LBS #6-32 &M3MOUNTING .087[2.20] HARDWARE [0.8-1.0 NM] PUSH-INSTUD .287[7.29] .126 [3.20] .070 DIA [Ø1.80] #8-32 &M4THREAD 12-15 IN-LBS MATINGHOLE [1.4-1.7 NM] TERMINAL SCREW 15-20 IN-LBS #10-32& M5 THREAD TERMINAL SCREW [1.7-2.3 NM] TAB(Q.C.) SOLDER TYPE 1.313[33.35] 2.230[56.64] TYP .520 [13.21] TABLEB LINE DEPTH TERMINAL DESCRIPTION BEHIND PANEL LINE 2.090 [53.09] TAB (Q.C.) MAIN SCREW TYPE 2.122 [53.90] 2.000 [50.80] SHUNT, RELAY TAB (Q.C.) 2.612 [66.35] & SCREW #8-32 2.644 [67.16] DUAL COIL W/UPTURNED LUGS LOAD TAB (Q.C.) .110 x .020 2.537 [64.44] LOAD AUX. SWITCH* SOLDER TYPE 2.348 [59.64] * AVAILABLEONSERIES TRIP AND SWITCH ONLY CIRCUITS. .875[22.23] REF WHEN CALLED FOR ON MULTI-POLE UNITS, ONLY ONE AUX. SWITCH IS NORMALLY SUPPLIED, AS SHOWN IN MULTI-POLE BARRIER FOR BARRIER FOR IDENTIFICATION SCHEME. UL-489 MULTI-POLE UL-RECOGNIZED MULTI-POLE BREAKERS BREAKERS SEETABLE-B .393[9.96] REF DEPTHBEHINDPANEL ON LINE I (NETZ) MID TRIP 1.560[39.62]TYP 30° 1.936[49.17] 1.350[34.29] 2PLCS OFF O 1.560[39.62] TYP LOAD (LAST) .032[.81] TYP PUSH-IN SCREWTERMINAL M6STUD STUD WITH30° BEND .220[5.59] TYP 1.250[31.75] BACKCONNECT BACKCONNECT SCREWTERMINAL SCREWTERMINAL WITHRETAINER Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | B-Series Handle – Front Panel Snap-In Mounting Style 5 11 Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ± 0.20 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 12 B-Series Handle – Front Panel Snap-in Mounting Style 5 Notes: 1 All dimensions are in inches [millimeters]. 2 Recommended panel thickness: .040 [1.02] to .100 [2.54]. 3 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | B-Series Handle – Front Panel Snap-In Mounting Style 7 13 Notes: 1 All dimensions are in inches [millimeters]. 2 Recommended panel thickness: .040 [1.02] to .100 [2.54]. 3 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 14 B-Series Rocker UL489 Listed – Ordering Scheme B F 1 — B 0 — 24 — 630 — 2 3 A — K G 1 2 3 4 5 6 7 8 9 10 11 12 Series Actuator Poles Circuit Aux/Alarm Frequency Current Rating Terminal Actuator Mounting/ Max. Appl. Agency Color Barriers Rating Approval Switch & Delay 5 1 SERIES 8 TERMINAL 6 B 1 Push-On 0.250 Tab (Q.C.) B Screw M5 w/upturned lugs 2 Screw 8-32 w/upturned lugs C Screw M4 w/upturned lugs 3 Screw 8-32 (Bus Type) F Screw M5 w/upturned lugs 2 ACTUATOR 4 Screw 10-32 w/upturned lugs and 30° bend Two Color Visi-Rocker 5 Screw 10-32 (Bus Type) G Screw M5 (Bus Type) C Indicate ON, vertical legend 6 Screw 8-32 w/upturned lugs and 30° bend D Indicate ON, horizontal legend and 30° bend H Screw M5 (Bus Type) F Indicate OFF, vertical legend 7 Screw 8-32 (Bus Type) and J Screw M5 Back Connect G Indicate OFF, horizontal legend 30° bend K Screw 10-32 Back Connect Single color 8 Screw 10-32 w/upturned lugs N Screw M4 Back Connect J Vertical legend and 30° bend Y Screw 8-32 Back Connect K Horizontal legend 9 Screw 10-32 (Bus Type) and 30° bend 9 ACTUATOR COLOR & LEGEND Actuator or Marking: Marking Color 7 7 Visi-Color I-O ON-OFF Dual Single Color Visi-Rocker White A B 1 Black White Black C D 2 White n/a Red F G 3 White Red Green H J 4 White Green Blue K L 5 White Blue Yellow M N 6 Black Yellow 1,2 3 POLES Gray P Q 7 Black Gray 3 1 One 2 Two 3 Three Orange R S 8 Black Orange 10 MOUNTING/BARRIERS 4 CIRCUIT 9 MOUNTING STYLE BARRIERS B Series Trip (Current) Threaded Insert, 2 per pole A 6-32 x 0.195 inches (multi-pole units only) yes 4 B ISO M3 x 5mm yes 5 AUXILIARY/ALARM SWITCH ROCKERGUARD BEZEL 0 w/o Aux Switch 7 S.P.S.T., 0.110 Q.C. Term. Threaded Insert, 2 per pole 1 S.P.D.T., 0.093 Q.C. Term. (Gold Contacts) C 6-32 X 0.225 inches (multi-pole units only) yes 2 S.P.D.T., 0.110 Q.C. Term. 8 S.P.S.T., 0.187 Q.C. Term. D ISO M3 x 6.5mm yes 3 S.P.D.T., 0.139 Solder Lug 9 S.P.D.T., 0.187 Q.C. Term. 6 FREQUENCY & DELAY 11 MAXIMUM APPLICATION RATING 8 21 AC Ultra Short 42 AC, Short,Hi-Inrush C 120/240 VAC 22 AC Short 44 AC, Medium, Hi-Inrush K 120 VAC 24 AC Medium 46 AC, Long, Hi-Inrush 26 AC Long 12 AGENCY APPROVAL G UL489 Listed 3 UL489 Listed, TUV Certified 7 CURRENT RATING (AMPERES) CODE AMPERES 210 0.100 285 0.850 455 5.500 613 13.000 Notes: 215 0.150 290 0.900 460 6.000 614 14.000 220 0.200 295 0.950 465 6.500 615 15.000 1 Multi-pole breakers have all breakers identical except when specifying Aux. switch and/or mixed poles, and have one rocker per breaker. 225 0.250 410 1.000 470 7.000 616 16.000 2 All poles must be same polarity. 230 0.300 512 1.250 475 7.500 617 17.000 3 3 pole units available only when1 of 3 poles is neutral. 235 0.350 415 1.500 480 8.000 618 18.000 4 On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole. 240 0.400 517 1.750 485 8.500 620 20.000 5 Screw Terminals are recommended on ratings greater than 20 amps. 245 0.450 420 2.000 490 9.000 622 22.000 6 Terminal Code 1 (Push-On) available up to 30 amps, but are not recommended over 20 amps. 250 0.500 522 2.250 495 9.500 624 24.000 7 Dual legend = ON-OFF/I-O 255 0.550 527 2.750 610 10.000 625 25.000 8 Voltage Rating available with 2 and 3-pole breakers only. 260 0.600 430 3.000 710 10.500 630 30.000 9 Barriers supplied on multi-pole units only. 265 0.650 435 3.500 611 11.000 270 0.700 440 4.000 711 11.500 275 0.750 445 4.500 612 12.000 280 0.800 450 5.000 712 12.500 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | B-Series Flat Rocker UL489 Listed – Ordering Scheme 15 B 1 1 — B 0 — 24 — 630 — 2 3 A — K G 1 2 3 4 5 6 7 8 9 10 11 12 Series Actuator Poles Circuit Aux/Alarm Frequency Current Rating Terminal Actuator Mounting/ Max. Appl. Agency Color Barriers Rating Approval Switch & Delay 6 1 SERIES 8 TERMINAL 7 B 1 Push-On 0.250 Tab (Q.C.) B Screw M5 w/upturned lugs 2 Screw 8-32 w/upturned lugs C Screw M4 w/upturned lugs 3 Screw 8-32 (Bus Type) F Screw M5 w/upturned lugs 1 2 ACTUATOR 4 Screw 10-32 w/upturned lugs and 30° bend Two Color Visi-Rocker 5 Screw 10-32 (Bus Type) G Screw M5 (Bus Type) 1 Indicate OFF, vertical legend 6 Screw 8-32 w/upturned lugs and 30° bend 2 Indicate OFF, horizontal legend and 30° bend H Screw M5 (Bus Type) Single color 7 Screw 8-32 (Bus Type) and J Screw M5 Back Connect 3 Vertical legend 30° bend K Screw 10-32 Back Connect 4 Horizontal legend 8 Screw 10-32 w/upturned lugs N Screw M4 Back Connect Push-To-Reset, Visi-Rocker and 30° bend Y Screw 8-32 Back Connect 5 Indicate OFF, 9 Screw 10-32 (Bus Type) and vertical legend 30° bend 6 Indicate OFF, horizontal legend Push-To-Reset , Single color 9 ACTUATOR COLOR & LEGEND 7 Vertical legend Actuator or Marking: Marking Color 8 8 8 Horizontal legend Visi-Color I-O ON-OFF Dual Single Color Visi-Rocker White A B 1 Black White Black C D 2 White n/a Red F G 3 White Red 2,3 3 POLES Green H J 4 White Green 4 1 One 2 Two 3 Three Blue K L 5 White Blue Yellow M N 6 Black Yellow Gray P Q 7 Black Gray 4 CIRCUIT Orange R S 8 Black Orange B Series Trip (Current) 9 10 MOUNTING/BARRIERS 4 12 5 AUXILIARY/ALARM SWITCH STANDARD ROCKER BEZEL,Threaded Insert, 2 per pole BARRIERS 0 w/o Aux Switch 7 S.P.S.T., 0.110 Q.C. Term. FLAT ROCKER ACTUATOR 1 S.P.D.T., 0.093 Q.C. Term. (Gold Contacts) A 6-32 x 0.195 inches (multi-pole units only) yes 2 S.P.D.T., 0.110 Q.C. Term. 8 S.P.S.T., 0.187 Q.C. Term. B ISO M3 x 5mm yes 10 3 S.P.D.T., 0.139 Solder Lug 9 S.P.D.T., 0.187 Q.C. Term. RECESSED OFF SIDE ROCKER ACTUATOR E 6-32 X 0.225 inches (multi-pole units only) yes F ISO M3 x 6.5mm yes PUSH-TO-RESET BEZEL,Threaded Insert, 2 per pole 6 FREQUENCY & DELAY C 6-32 x 0.195 inches yes 21 AC Ultra Short 42 AC, Short,Hi-Inrush D ISO M3 x 5mm yes 22 AC Short 44 AC, Medium, Hi-Inrush 24 AC Medium 46 AC, Long, Hi-Inrush 26 AC Long 11 MAXIMUM APPLICATION RATING 11 C 120/240VAC K 120VAC 7 CURRENT RATING (AMPERES) CODE AMPERES 210 0.100 285 0.850 455 5.500 613 13.000 215 0.150 290 0.900 460 6.000 614 14.000 12 AGENCY APPROVAL 220 0.200 295 0.950 465 6.500 615 15.000 G UL489 Listed 225 0.250 410 1.000 470 7.000 616 16.000 3 UL489 Listed, TUV Certified 230 0.300 512 1.250 475 7.500 617 17.000 235 0.350 415 1.500 480 8.000 618 18.000 Notes: 240 0.400 517 1.750 485 8.500 620 20.000 1 Push-To-Reset actuators have OFF portion of rocker shrouded. 245 0.450 420 2.000 490 9.000 622 22.000 2 Multi-pole breakers have all breakers identical except when specifying Aux. switch and/or 250 0.500 522 2.250 495 9.500 624 24.000 mixed poles, and have one rocker per breaker. 255 0.550 527 2.750 610 10.000 625 25.000 3 All poles must be same polarity. 260 0.600 430 3.000 710 10.500 630 30.000 4 3 pole units available only when1 of 3 poles is neutral. 265 0.650 435 3.500 611 11.000 5 On multi-pole breakers, one aux. switch is supplied, mounted in the extreme right pole. 6 Screw Terminals are recommended on ratings greater than 20 amps. 270 0.700 440 4.000 711 11.500 7 Terminal Code 1 (Push-On) available up to 30 amps, but are not recommended over 20 amps. 275 0.750 445 4.500 612 12.000 8 Color shown is visi and legend with remainder of rocker black, Dual = ON-OFF/I-O legend. 280 0.800 450 5.000 712 12.500 9 Legend on Push-to-reset bezel/shroud is white with single color actuator codes 7 & 8. Legend on Push-To-Reset bezel/shroud matches Visi-Color of rocker with actuator codes 5 & 6. 10 Recessed “off-side” available with actuator codes 1, 2, 3 & 4. Legends on rocker are available in ink stamping only. 11 Voltage rating available with 2 & 3-pole breakers only. 12 Barriers supplied on multi-pole units only. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 16 B-Series Rocker UL489 Listed – Form & Fit Drawings Notes: 1 Dimensions apply to all variations shown. Notice that circuit breaker line & load terminal orientation on indicate “OFF” is opposite of indicate “ON”. 2 For pole orientation with horizontal legend, rotate front view clockwise 90°. 3 All dimensions are in inches [millimeters]. 4 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | B-Series Flat Rocker UL489 Listed – Form & Fit Drawings 17 Notes: 1 All dimensions are in inches [millimeters]. 2 For pole orientation with horizontal legend, rotate front view clockwise 90°. 3 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 18 B-Series PC Terminal Diagrams Notes: 1 All dimensions are in inches [millimeters]. 2 For pole orientation with horizontal legend, rotate front view clockwise 90°. 3 Tolerance ±.010 [.25] unless otherwise specified. REV_CB_B_0812 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com