CARLING TECHNOLOGIES CA2-B0-16-650-5DA-C/RB2106CU1C

Circuit Breaker Accessories C-Series Remote Operated Module The Carling Technologies Remote Operated Circuit Breaker Design Features include: (ROCB) combines the convenience of remote ON, OFF and  ON-OFF and trip indication Reset capabilities, with the safety and accuracy of a standard  Load shedding magnetic current sensing device, thus allowing operation of the breaker from various locations in a system, facility or site (while  Energy management not sacrificing the ability to manually operate the breaker if  Compact size required). With the ROCB, service, diagnostics, load shedding  Automatic reset capable and power distribution control functions can now be performed  Choice of interface styles in areas that were previously unattended, inaccessible or  Panel or DIN rail mounting unsafe.  Manual Operation Override  Fits into industry standard cut-out The ROCB module allows remote operation of the C-Series panel mount breaker, or the D-Series DIN rail mount breaker ROCB Motor Specifications: (up to 3 poles) through hard wiring with a single pole, double throw switch connected to a standard power source, or more  Voltage input: 12 VDC to 80 VDC sophisticated relay and modem networks.  Start current: < 1 amp  Switching time: < 2 seconds The ROCB module can be mounted to either side of the host breaker, while occupying only the width of a standard C-Series pole. Several interface methods are available. Remote physical actuation of the host circuit breaker is achieved by connecting the ROCB module’s handle with the breakers. Being based on the C-Series breaker, the ROCB allows easy adaptation into existing panel designs. In addition, its compact size allows efficient use of space for new design applications. With the ROCB, Carling has designed a versatile, compact and reliable solution -- in a hydraulic/magnetic circuit breaker or switch only device that can be operated both manually and remotely. To order a remote operated circuit breaker, add / plus the remote module part number to the end of the C-Series circuit breaker catalog number. ex.CA1BO24620121C/RB1110BU1C Match color & mounting inserts of breaker. 10 / RB 1 1 B U 1 C 6 7 1 2 3 4 5 8 Actuator Mounting Series Mounting Interface Lead Length Voltage Agency Color Position Rating Insert Approval 5 VOLTAGE RATING 1 SERIES A 12 VDC RB B 20-40 VDC C 41-80 VDC 2 MOUNTING POSITION As viewed from back of breaker, line side up, pole 1 left. 6 ACTUATOR COLOR 0 n/a - ordered separate from breaker 1 Left Side T White 2 Right Side U Black V Red 3 INTERFACE W Yellow 1 Flying Leads 2 Integral Connector 7 MOUNTING INSERT 3 Flying Leads w/ 4 pin dual row connector (female) 1 6-32 x 0.195” 4 Flying Leads w/ 4 pin dual row connector (male) 2 ISO M3 x 5mm 4 LEAD LENGTH 8 AGENCY APPROVAL 00 No Lead 11 11” 22 22” C UL Recognized & CSA Accepted 01 1” 12 12” 23 23” E TUV Certified, UL Recognized & CSA Accepted 02 2” 13 13” 24 24” G UL 489 Listed & CSA Certified 03 3” 14 14” 25 25” I UL 1500 Ignition Protected,UL Recognized & CSA Accepted 04 4” 15 15” 26 26” J UL 489 Listed, CSA Certified & TUV Certified 05 5” 16 16” 27 27” 06 6” 17 17” 28 28” Notes: 07 7” 18 18” 29 29” Available with integral connector only. 08 8” 19 19” 30 30” Integral and 4-pin dual row connectors not available with agency approval G: UL 489. 09 9” 20 20” 10 10” 21 21” 120 www.carlingtech.com