CARLING TECHNOLOGIES DA2-B0-34-615-112-C

D-S D-Series eries CIRCUIT BREAKER Designed for snap-on-back panel rail mounting on either a 35mm x 7.5mm, or a 35mm x 15mm Symmetrical Din Rail, allowing rapid and simple mounting and removal of the breaker. It features recessed, wire-ready, touch-proof, shock-resistant terminals, suitable for automatic screwdriver assembly, as well as “Dead Front” construction characteristics. Available with a Visi-Rocker two-color actuator, which can be specified to indicate either the ON or the TRIPPED/OFF mode, or solid color rocker or handle type actuators. All actuator types fit in the same industry standard panel cutouts. Product Highlights: Typical Applications: Š 0.02 - 50 Amps Š Industrial Controls Š 480 VAC or 65 VDC Š Renewable Energy Š 1-4 poles (Handle) Š 1-3 poles (Rocker) Š Choice of Time Delays Š DIN rail mounting Š Precise temperature independent operation Š Wiping contacts – mechanical linkage with two-step Š Finger safe terminals Š Common trip linkage between poles ensures that an overload in one pole will trip all adjacent poles Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: sales@carlingtech.com www.carlingtech.com Application Support: team2@carlingtech.com Phone: 860.793.9281 Fax: 860.793.9231 | D-Series Circuit Breaker - General Specifications 2 Mechanical Electrical Maximum Voltage AC, 480 wye/277 VAC Endurance 10,000 ON-OFF operations @ 6 (See Table A), 50/60 Hz, 65VDC per minute; with rated Current Standard Current Coils 0.100, 0.250, 0.500, 0.750, 1.00, and Voltage. 2.50, 5.00, 7.50, 10.0, 15.0, 20.0, Trip Free All D-Series Circuit Breakers will 25.0, 30.0, 35.0, 40.0 & 50.0. trip on overload, even when Other ratings available - actuator is forcibly held in the ON consult factory. position. Standard Voltage Coils DC - 6V, 12V; AC - 120V, other Trip Indication The operating actuator moves ratings available, see ordering positively to the OFF position scheme. when an overload causes the Insulation Resistance Minimum of 100 Megohms at 500 breaker to trip. VDC. Dielectric Strength UL, CSA: 1960 V 50/60 Hz for one Physical minute between all electrically Number of Poles Rocker Type: 1-3; Handle Type: isolated terminals. D-Series circuit 1-4 breakers comply with the 8mm Internal Circuit Config. Switch Only and Series Trip with spacing and 3750V 50/60 Hz current or voltage trip coils. dielectric requirements from Weight Approximately 128 grams/pole hazardous voltage to operator (Approximately 4.57 ounces/pole) accessible surfaces and between Standard Colors Housing - Black; Actuator - See adjacent poles per Publications Ordering Scheme. EN 60950 and VDE 0805. Mounting Mounts on a standard 35mm Resistance, Impedance Values from Line to Load Terminal Symmetrical DIN Rail (35 x 7.5 or - based on Series Trip Circuit 35 x 15mm per DIN EN5002). Breaker RESISTANCE PER POLE VALUES Environmental from Line to Load Terminals (Values Based on Series Trip Circuit Breaker) Designed and tested in accordance with requirements of specification MIL-PRF-55629 & MIL-STD-202 as follows: CURRENT TOLERANCE (AMPS) (%) Shock Withstands 100 Gs, 6ms, sawtooth while carrying rated current per 0.10 - 5.0 15 Method 213, Test Condition “I”. 5.1 - 20.0 25 Instantaneous and ultra-short 20.1 - 50.0 35 curves tested @ 90% of rated current. Vibration Withstands 0.060” excursion from 10-55 Hz, and 10 Gs 55-500 Hz, at rated current per Method 204C, Test Condition A. Instantaneous and ultra-short curves tested at 90% of rated current. Moisture Resistance Method 106D, i.e., ten 24-hour Pulse Tolerance Curves cycles @ + 25°C to +65°C, 80- 98% RH. Salt Spray Method 101, Condition A (90-95% RH @ 5% NaCl Solution, 96 hrs). Thermal Shock Method 107D, Condition A (Five cycles @ -55°C to +25°C to +85°C to +25°C). Operating Temperature -40° C to +85° C *Manufacturer reserves the right to change product specification without prior notice. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com D-Series Circuit Breaker - General Specifications | 3 Electrical Tables Table A: Lists UL Recognized, CSA Accepted and VDE Certified configurations and performance capabilities as a Component Supplementary Protector. Notes: 1 DC and 1 Phase 277 V ratings are 1 or 2 poles breaking. Three phase ratings are 3 poles breaking. 2 Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse rated 15A minimum and no more than 4 times full load amps not to exceed 150 A for 250V rating and 125 A for 277 and 480 V ratings. 3 UL recognition and CSA Acceptance at 480 volts refers to 3 and 4 pole versions, used only in a 3 phase WYE connected circuit or 2 pole versions connected with 2 poles breaking 1 phase and backed up with series fusing per note 2 Agency Certifications UL Recognized CSA Accepted Component Supplementary UL Standard 1077 Component Recognition Program Protector under Class 3215 30, as Protectors, Supplementary File 047848 0 000 (Guide QVNU2, File E75596) CSA Standard C22.2 No. 235 UL Listed VDE Certified EN60934, VDE 0642 under File UL Standard 508 Switches, Industrial Control No. 10537 (Guide NRNT2, File E148683) Email: sales@carlingtech.com Application Support: team2@carlingtech.com Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com | 4 D-Series Circuit Breaker - Handle & Rocker – Ordering Scheme D A 3 B0 450 1 2 1 C 10 1 2 3 4 5 6 7 8 9 10 Series Actuator Poles Circuit Frequency Current Rating Terminal Actuator Mounting/ Agency & Delay Color Voltage Approval 9 1 SERIES 7 CURRENT RATING (AMPERES) CODE AMPERES D 020 0.020 275 0.750 450 5.000 616 16.000 025 0.025 280 0.800 455 5.500 617 17.000 1 2 ACTUATOR 030 0.030 285 0.850 460 6.000 618 18.000 2 Handle 050 0.050 410 1.000 465 6.500 619 19.000 A Handle, one per pole 075 0.075 512 1.250 470 7.000 620 20.000 B Handle, one per multipole unit 080 0.080 413 1.300 572 7.250 621 21.000 3 Visi-Rocker 085 0.085 414 1.400 475 7.500 622 22.000 210 0.100 415 1.500 480 8.000 623 23.000 C Indicate ON, vertical legend 215 0.150 517 1.750 485 8.500 624 24.000 D Indicate ON, horizontal legend 220 0.200 420 2.000 490 9.000 625 25.000 E Indicate ON, no legend (VDE approval not available with no legend) 225 0.250 522 2.250 495 9.500 626 26.000 F Indicate OFF, vertical legend 230 0.300 425 2.500 610 10.000 627 27.000 G Indicate OFF, horizontal legend 235 0.350 527 2.750 710 10.500 628 28.000 H Indicate OFF, no legend (VDE approval not available with no legend) 240 0.400 430 3.000 611 11.000 629 29.000 3 Single Color Rocker 245 0.450 532 3.250 711 11.500 630 30.000 J Vertical legend 250 0.500 435 3.500 612 12.000 632 32.000 K Horizontal legend 255 0.550 436 3.600 712 12.500 635 35.000 L No legend (VDE approval not available with no legend) 260 0.600 440 4.000 613 13.000 640 40.000 265 0.650 445 4.500 614 14.000 645 45.000 270 0.700 547 4.750 615 15.000 650 50.000 7 OR VOLTAGE COIL (NORMAL RATED VOLTAGE) CODE AMPERES A06 6 DC, 5 DC A48 48 DC, 40 DC J24 24 AC, 20 AC A12 12 DC, 10 DC A65 65 DC, 55 DC J48 48 AC, 40 AC A18 18 DC, 15 DC J06 6 AC, 5 AC K20 120 AC, 65 AC A24 24 DC, 20 DC J12 12 AC, 10 AC L40 240 AC, 130 AC A32 32 DC, 25 DC J18 18 AC, 15 AC 7 TERMINAL 1 #10 Screw & Pressure Plate for Direct Wire Connection 2 #10 Screw without Pressure Plate 8 ACTUATOR COLOR & LEGEND Actuator or 3 POLES Visi-Color Marking: Marking Color: 1 One 3 Three Single Color Visi-Rocker 7 2 Two 4 Four Color I-O ON-OFF Dual Rocker/Handle (Actuator Black) White A B 1 Black White Black C D 2 White N/A 4 CIRCUIT Red F G 3 White Red 4 A0 Switch Only (No Coil) Green H J 4 White Green B0 Series Trip (Current) Blue K L 5 White Blue C0 Series Trip (Voltage) Yellow M N 6 Black Yellow Gray P Q 7 Black Gray Orange R S 8 Black Orange 5 FREQUENCY & DELAY 03 DC 50/60Hz, Switch Only 26 50/60Hz Long 5 10 DC Instantaneous 32 DC, 50/60Hz Short 9 MOUNTING / VOLTAGE 34 DC, 50/60Hz Medium 11 DC Ultra Short MOUNTING STYLE VOLTAGE 12 DC Short 36 DC, 50/60Hz Long Threaded Insert 6 42 14 DC Medium 50/60Hz Short, Hi-Inrush 1 6-32 x 0.195 inches < 300 6 16 DC Long 44 50/60Hz Medium, Hi-Inrush 8 C 6-32 X 0.195 inches ≥ 300 5 6 20 50/60Hz Instantaneous 46 50/60Hz Long, Hi-Inrush 2 ISO M3 x 5mm < 300 6 21 50/60Hz Ultra Short 52 DC, Short, Hi-Inrush 8 D ISO M3 x 5mm ≥ 300 6 22 50/60Hz Short 54 DC, Medium, Hi-Inrush 6 24 50/60Hz Medium 56 DC, Long, Hi-Inrush 10 AGENCY APPROVAL Notes: C UL Recognized & CSA Accepted 1 Handle breakers available up to four poles. Rocker breakers available up to three poles. 9 D VDE Certified, UL Recognized & CSA Accepted 2 Actuator Code: A: Multi-pole units factory assembled with common handle tie. B: Handle location as viewed from front of breaker: 2 pole - left pole 3 pole - center pole 4 pole - two handles at center poles 3 Multipole rocker breakers have one rocker per breaker, as viewed from the front of the panel. Two pole - left pole. Three pole - center pole 4 ≤ 30A, select Current Rating code 630. 31-50A, select Current Rating code 650. 5 Voltage coil only available with delay codes 10 & 20. 6 Available to 50A max with circuit code BO only. 7 Color shown is visi and legend with remainder of rocker black. 8 ≥ 300V: Three pole breaker 3Ø or 2 pole breaker 1Ø, UL/CSA limited to 30 FLA max. 9 VDE Approval requires Dual (I-O, ON-OFF) or I-O markings Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com D-Series Circuit Breaker - Circuit & Terminal Diagram | 5 Circuit & Terminal Diagrams: in. [mm] Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com | 6 D-Series Circuit Breaker - Rocker – Dimensional Specifications Dimensional Specifications: in. [mm] Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 3 Dimensions apply to all variations shown. Notice that circuit breaker line and load terminal orientation on indicate OFF is opposite of indicate ON. 4 For pole orientation with horizontal legend, rotate front view clockwise 90°. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com D-Series Circuit Breaker - Handle - Dimensional Specifications | 7 Dimensional Specifications: in. [mm] Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.010 [.25] unless otherwise specified. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com | 8 Notes Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Sales Representatives, Distributors & Company Profile | 9 Authorized Sales Representatives and Distributors Click on a region of the map below to find your local representatives and distributors or visit www.carlingtech.com/findarep. CANADA EUROPE USA MIDDLE EAST MEXICO AFRICA ASIA-PACIFIC OCEANIA SOUTH AMERICA About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: sales@carlingtech.com Application Support: team2@carlingtech.com Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 @ Email: sales carlingtech.com @ Northern Region Sales Office: nrsm carlingtech.com @ Southeast Region Sales Office: sersm carlingtech.com @ Midwest Region Sales Office: mrsm carlingtech.com @ West Region Sales Office: wrsm carlingtech.com @ Latin America Sales Office: larsm carlingtech.com Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Suite 1607, 16/F Tower 2, The Gateway, Harbour City, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 @ Email: sales carlingtech.com.hk @ Shenzhen, China: shenzhen carlingtech.com @ Shanghai, China: shanghai carlingtech.com @ Pune, India: india carlingtech.com @ Kaohsiung, Taiwan: taiwan carlingtech.com @ Yokohama, Japan: japan carlingtech.com | | Europe Middle East Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 @ Email: ltd.sales carlingtech.com @ Germany: gmbh carlingtech.com @ France: sas carlingtech.com www.carlingtech.com REV_11_2016