CARLING TECHNOLOGIES FA1-B0-14-815-12A-BG

F-Series Circuit Breaker The F-Series hydraulic/magnetic high amperage circuit breakers are designed to handle high current applications in extremely hot and/or cold locations. Due to its time- proven hydraulic/magnetic design, the F-Series load sensing mechanism is insensitive to changes in ambient or enclosure temperature, providing a consistent trip point over temperatures ranging from -40°C to +85°C. Additionally, the F-Series circuit breakers come with a choice of overload time delays, making them ideal for critical applications having inductive loads. Further, the F-Series breakers are available up to 700A and an optional 25 millivolt metering shunt construction provides a safe method for monitoring current flowing through the breaker by simply connecting a meter with light gauge wire to the appropriate terminals located on the shunt housing at the rear of the breaker. Applications can be customized by measuring and displaying percentage of current, watts or safe/danger zones. Features: Š AC ratings to UL 489 Applications: Š DC voltage ratings up to 700A with metering Š Ideal for applications under extreme temperatures shunt section Š Higher Amperage Applications Š Consistent trip point over temperatures ranging Š Battery Disconnect Systems from -40°C to +85°C Š Solar Power Systems Š Optional 25 millivolt metering shunt construction Š Military Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062-1177 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: sales@carlingtech.com • www.carlingtech.com | 2 F-Series Circuit Breaker - General Specifications Electrical Mechanical Endurance 4000 ON-OFF operations with rated Maximum Voltage 125VDC, 277 VAC Current Rating Standard current coils: 100, 125, Current & Voltage & 4000 operations 150, 175, 225, 250 amps. 300, 350, with no load (8000 operations 400, 500, 600, 700 amps available as total) @ 5 per minute. Parallel Pole construction: 1000 operations with parallel pole construction. rated Current and Voltage @ 5 per Auxiliary Switch Rating SPDT; 10.1 Amps @ 250VAC, 1.0 Amps @ 65VDC, 0.5 Amps @ 80VDC minute. 0.1 Amps @ 125VAC (with gold Trip Free All F-Series Circuit Breakers will trip on contacts). overload, even when the actuator is forcibly held in the ON position. Insulation Resistance Minimum: 100 Megohms at 500 VDC Trip Indication The operating actuator moves Dielectric Strength 1960 VAC, 50/60 Hz for one minute between all electrically isolated positively to the OFF position when terminals, except 2500 VAC for one an overload causes the circuit breaker minute between alarm/aux. switch to trip. and main terminals with contacts in Physical open and closed position. F-Series circuit breakers comply with the Number of Poles 1 - 3 Poles Note: Ratings over 250 8mm spacing & 3750VAC 50/60 Amps only available with parallel pole. Hz dielectric requirements from Internal Circuit Config. Series (with or without auxiliary hazardous voltage to operator switch), Switch Only (with or without accessible surfaces, between auxiliary switch). adjacent poles and from main circuits Available Accessories Factory installed: DC Current Metering to auxilary circuits per Publications EN Shunt (25 mV @lr) 60950 and VDE 0805. Weight Varies depending on construction. Resistance, Impedance Values from Line to Load Terminal - Consult factory. based on Series Trip Circuit Breaker. Standard Colors Housing - Black; Actuator- Black or White with contrasting ON-OFF legend. RESISTANCE PER POLE VALUES from Line to Load Terminals (Values Based on Series Trip Circuit Breaker) Environmental Designed and tested in accordance with requirements of specification MIL-PRF-55629 & MIL-STD-202 as follows: Shock Withstands 100 Gs, 6ms, sawtooth while carrying rated current per Method 213, Test Condition “I”. Instantaneous and ultra-short curves tested @ 90% of rated current. Vibration Withstands 0.060” excursion from 10- 55 Hz, and 10 Gs 55-500 Hz, at rated current per Method 204C, Test Condition A. Instantaneous and ultrashort curves tested at 90% of rated current. Moisture Resistance Method 106D; ten 24-hour cycles @ + 25°C to +65°C, 80-98% RH.56 days @ +85°C, 85% RH. Salt Spray Method 101, Condition A (90-95% RH @ 5% NaCl Solution, 96 hrs). Thermal Shock Method 107D, Condition A (Five cycles @ -55°C to +25°C to +85°C to +25°C). Operating Temperature -40°C to +85°C. *Manufacturer reserves the right to change product specification without prior notice. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | F-Series Circuit Breaker - General Specifications 3 Table A: Lists UL Listed (489)and CSA Certified (C22.2 N0. 5.1-M) configurations and performance capabilities as a Molded Case Circuit Brekaer Electrical Tables Table A: Lists UL Listed (489)and CSA Certified (C22.2 N0. 5.1-M) configurations and performance capabilities as a Molded Case Circuit Breaker F SERIES TABLE A : UL489 LISTED BRANCH CIRCUIT BREAKERS VOLTAGE CURRENT INTERRUPTING RATING CAPACITY (AMPS) 2 CIRCUIT MAX FULL LOAD UL / CSA TUV CONFIGURATION RATING FREQUENCY PHASE AMPS 1 - 3 POLES 1 or 2 POLES 125 DC --- 50 - 250 50,000 25,000 1 120 / 240 50 / 60 1 100 - 250 10,000 --- SERIES 277 50 / 60 1 100 - 250 10,000 --- 208Y / 120 50 / 60 3 100 - 250 10,000 --- Notes: NOTES: 1 120/240V rating available in 2 or 3 poles. In a 3 pole construction the center pole is Neutral. 1. 120/240V rating available in 2 or 3 poles. In a 3 pole construction the center pole is Neutral. 2 TUV constructions are not available with AC ratings. 2. TUV constructions are not available with AC ratings. Table B: Lists UL Listed configurations and performance capabilities as Circuit Breakers for use in Communications Equipment (Guide DITT, File E189195), under UL489A Agency Certifications UL Listed TUV Certified IEC 60947-2 Circuit Breakers , Molded Case Low Voltage Switchgear and Control UL 489 (Guide DIVQ, File E129899) Gear under TUV License No. Complies with the requirements R72031058 of the CSA Standard for Molded Case Circuit Breakers, CANCSA- C22.2 No. 5.1 –M Circuit Breakers for Use in UL 489A Communications Equipment (Guide DITT, File E189195) 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 4 F-Series Handle – Ordering Scheme F A 2 — B 0 — 14 — 820 — 1 2 A — B G 1 2 3 4 5 6 7 8 9 10 11 12 Circuit Terminal Actuator Mounting Max. App. Agency Series Actuator Poles Aux/Alarm Frequency Current Rating Color Rating Approval Switch & Delay 12,13 1 SERIES 9 ACTUATOR COLOR & LEGEND F Acuator Color I-O ON-OFF Dual Marking Color White A B 1 Black Black C D 2 White 2 ACTUATOR A Handle, one per pole S Mid-Trip Handle, one per pole 10 MOUNTING T Mid-Trip Handle, one per pole & Alarm Switch Front Mounting Inserts Back Mounting Inserts A 10-32 10-32 screw clearance holes B ISO M5 10-32 screw clearance holes 3 POLES 1 One 2 Two 3 Three 11 MAXIMUM APPLICATION RATING VOLTAGE CURRENT 4 CIRCUIT Parallel Pole Construction: 1 3,4 B 125 VDC 700A A Switch Only (no coil) M Series Trip (Current) with 15 C 120/240 250A B Series Trip (current) Metering Shunt 2 3,4 C Series Trip (voltage) N Switch Only with F 277 VAC 250A 16 Metering Shunt 7 120/208 VAC 250A 3 P Series Trip (Current) 3 Q Switch Only 12 AGENCY APPROVAL A No approvals 5 5 AUXILIARY/ALARM SWITCH 8 S.P.S.T., 0.187 Q.C. G UL 489 Listed & CUL Certified 0 w/o Aux Switch Terminals J UL 489 Listed, CUL Certified & TUV Certified 2 S.P.D.T., 0.110 Q.C. Term. 9 S.P.D.T., 0.187 Q.C. T UL489A (Telecom) Listed 3 S.P.D.T., 0.139 Solder Lug Terminals. 6 4 S.P.D.T., 0.110 Q.C. Term. A S.P.S.T., 0.093 Round QC Notes: (Gold Contacts) Terminals. 1 For 100 to 250 amps, select Current Code 825. For 300-400 amps, select Current 6 5 S.P.S.T., 0.093 Q.C. Term. B S.P.D.T., 0.093 Round Q.C. Code 840. For 450-700 amps, select Current Code 870. (Gold Contacts) Terminals. 2 Available with Frequency and Delay code 10 or 20 only, and are not rated for continuous 6 S.P.S.T., 0.139 Solder Lug duty. Delay 10 and 20 are only available with voltage coils. 3 3 Codes M, N, P & Q (Parallel Poles) are supplied with factory installed Bus Bar on 7 S.P.S.T., 0.110 Q.C. Term. Line and Load. (Gold Contacts) 4 4 Metering terminals are female pin type, ref. Molex part number 02-09-1101, model 1189-T. 5 Auxiliary Switch breakers are only available with Series Trip and Switch Only circuits. 6 FREQUENCY & DELAY 14 DC Medium On multi-pole breakers, one Auxiliary Switch is supplied, mounted in the extreme right 03 DC 50/60Hz, Switch Only 16 DC Long pole per figure A. Back-Mounted breakers require special mounting provisions when 7 10 DC Instantaneous 22 AC Short an Auxiliary Switch is specified. 11 DC Ultra Short 24 AC Medium 6 Available with parallel pole construction (circuit codes P and Q, and breakers with circuit codes M and N). 12 DC Short 26 AC Long 7 Frequency and delay code 10 is only available with Voltage Coils. Voltage Coils are not rated for continuous duty. 8 Ratings over 250 amps are only available with Agency Approval code T (UL489A) and are Parallel Pole configuration (circuit codes M, N, P and Q.) 300-450 amp ratings are 7 CURRENT RATING (AMPERES) CODE AMPERES available on two pole breakers. 500-700 amp ratings are available on three pole breakers. 8 8 9 Per UL requirement, an “Anti-Flash Over Barrier” is supplied between poles on multipole 810 100.00 820 200.00 835 350.00 860 600.00 breakers with 3/8 - 16 stud terminals (Terminal Code 1) 8 8 912 125.00 922 225.00 840 400.00 870 700.00 10 Front connected breakers can also be front mounted by utilizing the supplied front panel 8 815 150.00 825 250.00 845 450.00 mounting inserts.Terminal connections must be made before mounting. 8 8 917 175.00 830 300.00 850 500.00 11 Box Wire connector will accept #6 through 250 MCM copper wire. 7 12 Agency codes G & T must have ON-OFF or dual legends. Agency code J must have dual OR VOLTAGE COIL (VOLTS, MIN. TRIP RATING) legend. CODE AMPERES 13 Other colors available. Consult factory. A06 6 DC, 5 DC A24 24 DC, 20 DC A65 65 DC, 55 DC 14 Terminals 2,4 & 5 are shipped without terminal hardware. A12 12 DC, 10 DC A32 32 DC, 25 DC B25 125 DC, 100 DC 15 2 or 3 Pole Circuit Breaker Required for 120/240 VAC Rating. A18 18 DC, 15 DC A48 48 DC, 40 DC J06 6 AC, 5 AC 16 3 Pole Circuit Breaker Required for 120/208 VAC Rating. 8 TERMINAL Back Connected (Front Mounted Only) Max Rating 9 1 3/8-16 Stud 250A 14 2 3/8-16 Screw, Line & Load 700A 14 5 3/8-16 Short Stud 250A 11 Front Connected (Back Mounted Only) Max Rating 3 Box Wire Connector, Line & Load 700A 14 4 3/8-16 Screw, Line & Load 700A 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | F-Series Handle – Circuit & Terminal Diagrams 5 Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 6 F-Series Handle – Circuit & Terminal Diagrams Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | F-Series Handle – Circuit & Terminal Diagrams 7 Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 8 F-Series Handle – Form & Fit Diagrams Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | F-Series Handle – Form & Fit Diagrams 9 Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 10 F-Series Handle – Form & Fit Diagrams F-Series breakers are available up to 700A, and are also available with a 25 millivolt metering shunt construction. This optional construction provides a safe method for monitoring current flowing through the breaker by simply connecting a meter with light gauge wire to the appropriate terminals located on the shunt housing at the rear of the breaker. You can customize the application by measuring and displaying percentage of current, watts or safe/danger zones. Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | F-Series Handle – Form & Fit Diagrams 11 Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 12 F-Series Circuit Breaker - Time Delay Curves 11 No Trip .013 - .125 .010 - .070 .008 - .032 .006 - .020 .005 - .020 .004 - .020 .004 - .020 12 No Trip .475 - 10.0 .275 - 2.80 .140 - .850 .030 - .190 .015 - .125 .010 - .050 .008 - .038 14 No Trip 10.0 - 110 6.00 - 40.0 2.50 - 15.0 .500 - 3.00 .180 - 1.00 .010 - .280 .008 - .080 16 No Trip 110 - 1000 60.0 - 400 22.0 - 150 4.00 - 25.0 1.00 - 5.50 .010 - 1.80 .008 - .390 No Trip 22 .700 - 12.0 .350 - 4.00 .130 - 1.30 .027 - .220 .008 - .130 .004 - .090 .004 - .045 No Trip 10.0 - 160 6.00 - 60.0 .220 - 20.0 .300 - 3.00 .050 - 1.30 .007 - .500 .005 - .060 24 No Trip 50.0 - 700 32.0 - 350 10.0 - 90.0 1.50 - 15.0 .500 - 7.00 .020 - 3.00 .006 - 2.00 26 AC DC Short - AC 22 Ultrashort - DC F SERIES 50/60 HZ SHORT CURVE NO. 22 Short - DC Medium - AC 24 F SERIES 50/60 HZ MEDIUM CURVE NO. 24 Medium - DC Long - AC 26 F SERIES 50/60 HZ LONG CURVE NO. 26 Long - DC REV_CB_F_0612 60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com