CARLING TECHNOLOGIES ME2-B-94-610-1-A36-2-E

M-Series General Specifications The low cost M-Series utilizes the hydraulic magnetic principle which provides accurate and reliable circuit protection even when exposed to extremely hot and/or cold application environments. Available in a choice of rocker actuator styles and colors, push button, push-pull, paddle, and baton style handle actuators, the ® Visi-Rocker two-color actuators as well as non-illuminated or illu- minated rocker versions with LED or neon bulbs. The exclusive ® Rockerguard bezel helps prevent inadvertent actuation. "Wiping" contact design insures long term reliability. Various styling options allow design flexibility. Typical applications include power supplies, medical equipment, and telecommunications equipment. In addition, these breakers meet CSA Standard 22.2 No. 100 for the Generator & Welder markets. Agency Certifications UL Recognized CSA Accepted Component Supplementary Protector under Class 3215 30, UL Standard 1077 Component Recognition Program as Protectors, Supplementary (Guide File 047848 0 000 CCN/QVNU2, File E75596) CSA Standard C22.2 No. 235 UL Listed VDE Certified EN60934, VDE 0642 under File 10537 UL Standard 489A Communications Equipment (Guide CCN/DITT, File E189195) TUV Certified EN60934, under License No. R9671109 Electrical Table A: Lists UL Recognized and CSA Accepted configurations & performance capabilities as a Component Supplementary Protector. NOTES FOR TABLE A 1 Polarity Sensitive 2 Available only with Special Catalog Number. Consult Factory. 3 Requires Branch Circuit Backup with a UL Listed type K-5 or RK-5 fuse rated 30 Amps maximum 4 Requires Branch Circuit Backup with a UL Listed type K-5 or RK-5 fuse rated 60 Amps maximum 18 www.carlingtech.com M-Series General Specifications Electrical Table B: Lists UL Recognized,CSA Accepted and TUV and VDE Certified configurations and performance capabilities as a Component Supplementary Protector. NOTES FOR TABLE B 1 Polarity Sensitive 2 Available only with Special Catalog Number. Consult Factory. 3 Requires Branch Circuit Backup with a UL Listed type K-5 or RK-5 fuse rated 30 Amps maximum 4 TUV only, not VDE 5 Requires backup protection with a thermal magnetic circuit breaker rated 32 amps and having a Type C trip characteristic per EN60898/DIN VDE 0641 (C32A) for ratings greater than 15 amps, and a thermal magnetic circuit breaker rated 16 amps and having a Type C trip characteristic per EN60898/DIN VDE 0641 (C16A) for ratings 15 amps and less. Table C: Lists UL489A Listed and TUV Certified configurations and performance capabilities for use in Communications Equipment. NOTES FOR TABLE C 1. Available only with Special Caralog Number www.carlingtech.com 19 M-Series General Specifications Electrical Mechanical Maximum Voltage 125/250 VAC 50/60 Hz, 80 VDC Endurance 10,000 ON-OFF operations @ 6 per (See Rating Tables.) minute with rated Current and Current Ratings Standard current coils: 0.100, 0.250, Voltage. 0.500, 0.750, 1.00 thru 15.0 in 1 Trip Free All M-Series Circuit Breakers will trip amp increments, 18.0, on overload, even when actuator is 20.0, 25.0, 30.0. Other ratings avail- forcibly held in the ON position. able - see Ordering Scheme. Trip Indication The actuator moves positively to the Auxiliary Switch Rating SPDT; 7A 250VAC, 7A (Res) OFF position when an overload 28VDC, 4A (Ind.) 28VDC, 0.25A causes the circuit breaker to trip. 80VDC (Res) (silver contacts), 0.1A Physical 125VAC (gold contacts). Insulation Resistance Minimum of 100 Megohms at 500 VDC. Number of Poles 1 or 2 Dielectric Strength UL, CSA 1500V, 50/60 Hz for one Internal Circuit Configurations Series with or without Auxiliary minute between all electrically isolat- Switch. ed terminals. M-Series Circuit Switch Only with or without Auxiliary Breakers comply with the 8mm Switch. spacing and 3750 V 50/60Hz dielec- Weight Approximately 30 grams/pole tric requirements from hazardous (Approximately 1.07 ounces/pole) voltage to operator accessible sur- Standard Colors See Ordering Scheme. faces, per Publications IEC 380, 435, 950, EN 60950 and VDE 0805. Environmental Resistance, Impedance Values from Line to Load Terminal - based on Series Trip Circuit Breaker. Designed and tested in accordance with requirements of specifi- cation MIL-PRF-55629 & MIL-STD-202 as follows: Shock Withstands 100 Gs, 6ms, sawtooth while carrying rated current per Method 213, Cond. I. Instantaneous curves tested at 80% of rated current. Vibration Withstands 0.060" excursion from 10- 55 Hz, and 10 Gs 55-500 Hz, at rated current per Method 204C, Test Condition A. Instantaneous curves tested at 80% of rated current. Moisture Resistance Method 106D, i.e., ten 24-hour cycles @ + 25°C to +65°C, 80-98% RH. Salt Spray Method 101, Condition A (90-95% RH @ 5% NaCl Solution, 96 hrs). Thermal Shock Method 107D, Condition A (Five cycles @ -55°C to +25°C to +85°C Pulse Tolerance Curves to +25°C). Operating Temperature -40° C to +85° C Chemical Resistance Only the outside surfaces of the case and the handles may be cleaned with detergents or alcohol. Organic (hydro- carbon based) solvents are not rec- ommended because they attack plas- tics. Caution should be taken when solvents are used to clean and remove flux from terminals. Lubricants should not be introduced into the han- dle/bushing openings. 20 www.carlingtech.com M-Series Handle/Pushbutton UL Recognized - Ordering Scheme 34 260 – – – – – – M M 1 B – 1 1 B B B C 6 7 10 12 1 2 3 4 5 8 9 11 Terminal Legend Bushing Agency Series Actuator Poles Circuit Frequency Current Rating Actuator Front Panel Color & Delay Color Hardware Plate Approval 8 1 SERIES 6 CURRENT RATING (AMPERES) M 020 0.020 225 0.250 420 2.000 710 10.500 025 0.025 230 0.300 522 2.250 611 11.000 1 030 0.030 235 0.350 425 2.500 711 11.500 2 ACTUATOR 035 0.035 240 0.400 527 2.750 612 12.000 040 0.040 245 0.450 430 3.000 712 12.500 Handle 045 0.045 250 0.500 435 3.500 613 13.000 M Paddle N Baton 050 0.050 255 0.550 440 4.000 614 14.000 055 0.055 260 0.600 445 4.500 615 15.000 060 0.060 265 0.650 450 5.000 616 16.000 Push Button 065 0.065 270 0.700 455 5.500 617 17.000 T Push-Pull U Push To Reset 070 0.070 275 0.750 460 6.000 717 17.500 075 0.075 280 0.800 465 6.500 618 18.000 080 0.080 285 0.850 470 7.000 619 19.000 Push Button w/ Snap-In Mounting 085 0.085 290 0.900 475 7.500 620 20.000 V Push-Pull W Push To Reset 090 0.090 295 0.950 480 8.000 622 22.000 095 0.095 410 1.000 485 8.500 624 24.000 210 0.100 512 1.250 490 9.000 625 25.000 9 215 0.150 415 1.500 495 9.500 630 30.000 220 0.200 517 1.750 610 10.000 3 POLES 1 One 2 Two 8 7 TERMINAL 11 2 1 Push-On 0.250 Tab (Q.C.) A Push-In Stud 4 CIRCUIT 10 12 2 Screw 8-32 w/upturned lugs P Printed Circuit Board without Auxiliary Switch 10 3 Screw 8-32 (Bus Type) A Switch Only (No Coil), Maintained Contacts B Series Trip (Current) 5 8 ACTUATOR COLOR with Auxiliary Switch, Silver Contacts Terminal Type: Handle Push-Button Actuator Color 3 P Switch Only, Maintained Contacts .060 Dia, Round Solder Turret 1A White 3, 4 Q Switch Only, Maintained Contacts .058 Dia, Round Q.C. 2B Black 3, 13 R Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C. 3C Red 3 S Series Trip (Current) .060 Dia, Round Solder Turret 4D Green 3, 4 T Series Trip (Current) .058 Dia, Round Q.C. 5E Blue 3, 13 6F Yellow U Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. 8H Orange with Auxiliary Switch, Gold Contacts 3, 4 2 Switch Only, Maintained Contacts .058 Dia, Round Q.C. 6 3, 13 9 FRONT PANEL HARDWARE 3 Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C. 3,4 Handle Push-Button 4 Series Trip (Current) .058 Dia, Round Q.C. No outer Panel HardwareA1 3, 13 5 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. Knurled Nut Bright nickel B2 5 FREQUENCY & DELAY 32 DC, 50/60Hz Short Bright nickel w/ locking ring C 03 DC 50/60Hz, Switch Only 34 DC, 50/60Hz Medium Black D 10 DC Instantaneous 62 50/60Hz Short, Hi-Inrush Black w/ locking ring E 12 DC Short 64 50/60Hz Medium, Hi-Inrush Panel Dress Nut 14 DC Medium 72 DC, Short,Hi-Inrush Bright nickel F 20 50/60Hz Instantaneous 74 DC, Medium, Hi-Inrush Bright nickel w/ locking ring G 22 50/60Hz Short 92 DC, 50/60Hz Short, Hi-Inrush Black H 24 50/60Hz Medium 94 DC, 50/60Hz, Medium, Hi-Inrush Black w/ locking ring J 30 DC, 50/60Hz Instantaneous Notes: 10 LEGEND PLATE / BUTTON MARKING 1 One actuator is located in the center of each multi-pole breaker. Actuator codes V & W Handle Actuator Legend Plate (Actuator Styles M & N) limited to single pole breakers only. A No Legend Plate 2 Switch Only circuits are not available with Push-To-Reset actuators. For Switch Only circuits, select Current Coil Rating from the following chart: B ON - OFF Vertical C ON - OFF Horizontal D I - O Vertical E I - O Horizontal Push-Pull Actuator Button Cap (Actuator Styles T & V) 1 No Marking 2 Rated Amps Horizontal 3 Rated Amps Line Side Down 4 Rated Amps Line Side Up Push-to-Reset Actuator Button (Actuator Styles U& W) 3 One Auxiliary Switch is supplied per breaker. On two-pole breakers, standard Auxiliary 1 No Marking Switch mounting is in pole one. Auxiliary Switch option limited to Series Trip and Switch Only circuits. Not available with back connect screw or push-in stud terminals. 7 4 Mates with AMP .058" diameter pin receptacles including 60983-1 (gold plated) and 60983- 11 BUSHING COLOR 2 (tin plated). B Black 5 Actuator color is only visible in the OFF position on Push-Pull actuators. 6 All units except snap-in mounting have one hex nut installed on bushing for use behind the 8 12 AGENCY APPROVAL panel. 7 Other colors available. Consult factory. C UL Recognized & CSA Accepted 8 TUV and VDE Certification above 15 amps is for 2-pole only and is limited to a max. of 25 D VDE Certified, UL Recognized & CSA Accepted amps. Screw Terminal or Push-In Stud recommended above 20 amps. E TUV Certified, UL Recognized & CSA Accepted 9 30 amp rating not available with delay’s 30, 32, 34, 92 or 94. 10 Screw Terminals are VDE certified only with use of ring terminal attached to wire. 11 Terminal code A available with circuit codes A & B only. 12 Printed circuit board available with UL recognized approval only. 13 Auxiliary switch (flat Q.C.) available with UL recognized approvals only. www.carlingtech.com 21 M-Series Handle/Pushbutton UL489A/UL Recognized – Ordering Scheme 14 620 – – – – – – – M M 1 B 1 1 B B B J 6 7 10 12 1 2 3 4 5 8 9 11 Terminal Front Panel Legend Bushing Agency Series Actuator Poles Circuit Frequency Current Rating Actuator Hardware Color & Delay Color Plate Approval 4 1 SERIES 7 TERMINAL 10 M 1 Push-On 0.250 Tab (Q.C.) A Push-In Stud 11 2 Screw 8-32 w/upturned lugs P Printed Circuit Board 1 3 Screw 8-32 (Bus Type) 2 ACTUATOR 5 Handle 8 ACTUATOR COLOR & LEGEND M Paddle N Baton Gloss Handle Push-Button Actuator Color 1A White 2B Black 3C Red Push Button 4D Green T Push-Pull U Push To Reset 5E Blue 6F Yellow 8H Orange Push Button w/ Snap-In Mounting V Push-Pull W Push To Reset 6 9 FRONT PANEL HARDWARE Handle Push-Button No outer Panel HardwareA1 Knurled Nut 3 POLES bright nickel B2 1 One bright nickel w/ locking ring C black D 4 CIRCUIT black w/ locking ring E without Auxiliary Switch Panel Dress Nut B Series Trip (Current) bright nickel F with Auxiliary Switch, Silver Contacts Terminal Type: bright nickel w/ locking ring G 2 S Series Trip (Current) .060 Dia, Round Solder Turret black H 2,3 T Series Trip (Current) .058 Dia, Round Q.C. black w/ locking ring J 3, 12 U Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. with Auxiliary Switch, Gold Contacts 10 LEGEND PLATE / BUTTON MARKING 2,3 4 Series Trip (Current) .058 Dia, Round Q.C. Handle Actuator Legend Plate (Actuator Styles M & N) 3, 12 5 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. A No Legend Plate B ON - OFF Vertical C ON - OFF Horizontal 5 FREQUENCY & DELAY D I - O Vertical 12 DC Short 72 DC, Short, Hi-Inrush E I - O Horizontal 14 DC Medium 74 DC, Medium, Hi-Inrush Push-Pull Actuator Button Cap (Actuator Styles T & V) 8 1 No Marking 6 CURRENT RATING (AMPERES) 2 Rated Amps Horizontal 020 0.020 225 0.250 420 2.000 710 10.500 3 Rated Amps Line Side Down 025 0.025 230 0.300 522 2.250 611 11.000 4 Rated Amps Line Side Up 030 0.030 235 0.350 425 2.500 711 11.500 Push-To-Reset Actuator Button Cap (Actuator Styles U & W) 035 0.035 240 0.400 527 2.750 612 12.000 8 1 No Marking 040 0.040 245 0.450 430 3.000 712 12.500 045 0.045 250 0.500 435 3.500 613 13.000 7 11 BUSHING COLOR 050 0.050 255 0.550 440 4.000 614 14.000 B Black 055 0.055 260 0.600 445 4.500 615 15.000 060 0.060 265 0.650 450 5.000 616 16.000 9 12 AGENCY APPROVAL 065 0.065 270 0.700 455 5.500 617 17.000 070 0.070 275 0.750 460 6.000 717 17.500 J UL489A Listed, TUV Certified 075 0.075 280 0.800 465 6.500 618 18.000 M UL Recognized, CSA Accepted 080 0.080 285 0.850 470 7.000 619 19.000 N UL Recognized, TUV Certified 085 0.085 290 0.900 475 7.500 620 20.000 T UL489A Listed 090 0.090 295 0.950 480 8.000 622 22.000 095 0.095 410 1.000 485 8.500 624 24.000 210 0.100 512 1.250 490 9.000 625 25.000 215 0.150 415 1.500 495 9.500 630 30.000 220 0.200 517 1.750 610 10.000 Notes: 1 One actuator is located in the center of each multi-pole breaker. Actuator codes V & W limited to single pole breakers only. 2 One Auxiliary Switch is supplied per breaker. On two-pole breakers, standard Auxiliary Switch mounting is in pole one. Auxiliary Switch option limited to Series Trip and Switch Only circuits. Not available with Back Connected Screw or Push-in Stud terminals. 3 Mates with AMP .058" diameter pin receptacles including 60983-1 (gold plated) and 60983-3 (tin plated). 4 Screw terminals or Push-in Stud recommended above 20 amps. 5 Actuator color is only visible in the OFF position on Push-Pull actuators. 6 All units have one hex nut installed on bushing for use behind the panel. 7 Other colors available. Consult factory. 8 Not available with UL489A Listed breakers. 9 TUV certified to 25 amps. UL Recognized, CSA Accepted and UL Listed to 30 amps. 10 Terminal code A available with circuit codes A & B only. 11 Printed circuit board available with UL recognized approval only. 12 Auxiliary switch (flat Q.C.) available with UL recognized approvals only. 22 www.carlingtech.com M-Series Rocker UL Recognized – Ordering Scheme 34 620 – M G 2 – B – – 1 H C 6 – 7 – C 5 6 7 10 12 1 2 3 4 8 9 11 Terminal Actuator Legend Bezel Agency Series Actuator Poles Circuit Frequency Current Rating Illumination Color Color & Delay Approval 1 SERIES 8 ROCKER ILLUMINATION M Non-illuminated A 5 8 Neon Neon Green Glow 1 without resistor, 120VAC/250VACBC 2 ACTUATOR 7, 8 LED Red Green Amber Non-Illuminated Two Color llluminated without resistor DG K single color Visi-Rocker single color with resistor, 4-8 VDC EH L D Indicate ON F Angled A Angled with resistor, 9-16 VDC FJ M E Indicate OFF G Flat B Flat 9 ACTUATOR & LEGEND COLOR Solid Color Actuator Legend 1 White Black 2 Black White 3 Red White 4 Green White 5 Blue White 6 Yellow Black 7 Gray Black 8 Orange Black 6 Visi-Rocker Visi & Legend (remainder of rocker same color as bezel) 1 White 2 Black 3 POLES 3 Red 1 One 2 Two 4 Green 5 Blue 2 4 CIRCUIT 6 Yellow without Auxiliary Switch 7 Gray A Switch Only (No Coil), Maintained Contacts 8 Orange 8 Illuminated Actuator Legend B Series Trip (Current) A Clear White with Auxiliary Switch, Silver Contacts Terminal Type: B Red Transparent White 3 P Switch Only, Maintained Contacts .060 Dia, Round Solder Turret C Green Transparent White 3, 4 Q Switch Only, Maintained Contacts .058 Dia, Round Q.C. D Amber Transparent White 3, 16 R Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C. E Smoke Gray Transparent White 3 F White Translucent Black S Series Trip (Current) .060 Dia, Round Solder Turret 3, 4 T Series Trip (Current) .058 Dia, Round Q.C. 11 3, 16 10 LEGEND U Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. 1 No Legend 5 I - O Horizontal with Auxiliary Switch, Gold Contacts 2 ON - OFF Vertical 6 Dual Vertical 3, 4 2 Switch Only, Maintained Contacts .058 Dia, Round Q.C. 3 ON - OFF Horizontal 7 Dual Horizontal 3, 16 4 I - O Vertical 3 Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C. 3,4 4 Series Trip (Current) .058 Dia, Round Q.C. 9 11 BEZEL COLOR / STYLE 3, 16 5 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. Color without Rockerguard with Rockerguard White A1 5 FREQUENCY & DELAY 32 DC, 50/60Hz Short Black B2 Gray G7 03 DC 50/60Hz, Switch Only 34 DC, 50/60Hz Medium 10 DC Instantaneous 62 50/60Hz Short, Hi-Inrush 10 12 DC Short 64 50/60Hz Medium, Hi-Inrush 12 AGENCY APPROVAL 14 DC Medium 72 DC, Short, Hi-Inrush C UL Recognized & CSA Accepted 20 50/60Hz Instantaneous 74 DC,Medium, Hi-Inrush D VDE Certified, UL Recognized & CSA Accepted 22 50/60Hz Short 92 DC, 50/60Hz Short, Hi-Inrush E TUV Certified, UL Recognized & CSA Accepted 24 50/60Hz Medium 94 DC, 50/60Hz, Medium, Hi-Inrush Notes: 30 DC, 50/60Hz Instantaneous 1 One actuator is located in the center of each multi-pole breaker. 2 For Switch Only circuits, select Current Coil Rating from the following chart: 10 6 CURRENT RATING (AMPERES) 020 0.020 225 0.250 420 2.000 710 10.500 025 0.025 230 0.300 522 2.250 611 11.000 030 0.030 235 0.350 425 2.500 711 11.500 035 0.035 240 0.400 527 2.750 612 12.000 040 0.040 245 0.450 430 3.000 712 12.500 045 0.045 250 0.500 435 3.500 613 13.000 050 0.050 255 0.550 440 4.000 614 14.000 3 One Auxiliary Switch is supplied per breaker. On two-pole breakers, standard Auxiliary Switch 055 0.055 260 0.600 445 4.500 615 15.000 mounting is in pole one. Auxiliary Switch option limited to Series Trip & Switch Only circuits, & is not 060 0.060 265 0.650 450 5.000 616 16.000 available in single pole illuminated breakers, or Back Connected Screw or Push-in Stud terminals. 065 0.065 270 0.700 455 5.500 617 17.000 4 Mates with AMP .058" diameter pin receptacles: 60983-1 (gold plated) & 60983-2 (tin plated). 5 For neon bulb applications at 120VAC @ 47K, 1/4 WATT and for 250VAC applications @ 150K, 070 0.070 275 0.750 460 6.000 717 17.500 1/4 WATT, external resistors must be supplied by customer. 075 0.075 280 0.800 465 6.500 618 18.000 6 On Visi-Rocker breakers, Visi portion of rocker cannot be the same color as the bezel. 080 0.080 285 0.850 470 7.000 619 19.000 7 For LED (DC or rectified AC) applications, LED is mounted in the center of the rocker actuator with 085 0.085 290 0.900 475 7.500 620 20.000 electrical characteristics: 100 millicandela at 20mA; Maximum power dissipation = 75mW at 25°C; Maximum forward current = 25mA; Typical forward voltage = 2.1V at 20mA; Typical reverse current 090 0.090 295 0.950 480 8.000 622 22.000 = 100uA at 3V. Customer supplies the proper external resistor limiting current to these values. 095 0.095 410 1.000 485 8.500 624 24.000 8 Rocker color for LED’s and green neon lamp must be clear, smoke gray, white translucent or 210 0.100 512 1.250 490 9.000 625 25.000 match color of LED or neon lamp. 12 215 0.150 415 1.500 495 9.500 630 30.000 9 Other colors available. Consult factory. 10 TUV and VDE Certified to 25 amps. UL Recognized and CSA Accepted to 30 amps. Screw 220 0.200 517 1.750 610 10.000 Terminals or Push-in Stud recommended above 20 amps. 11 TUV or VDE Certified must have I-O or Dual Legends. Legend required on Visi-Rocker breakers. 10 7 TERMINAL 12 30 amp rating not available with delay’s 30, 32, 34, 92 or 94. 14 13 Screw Terminals are VDE certified only with use of ring terminal attached to wire. 1 Push-On 0.250 Tab (Q.C.) A Push-In Stud 13 15 14 Terminal code A available with circuit codes A & B only. 2 Screw 8-32 w/upturned lugs P Printed Circuit Board 15 Printed circuit board available with UL recognized approval only. 13 3 Screw 8-32 (Bus Type) 16 Auxiliary switch (flat Q.C.) available with UL recognized approvals only. www.carlingtech.com 23 M-Series Rocker UL489A/UL Recognized – Ordering Scheme 14 620 – – – – – – M A 1 B – 1 A 1 6 2 J 6 7 10 12 1 2 3 4 5 8 9 11 Terminal Actuator Legend Bezel Agency Series Actuator Poles Circuit Frequency Current Rating Illumination Color Color & Delay Approval 1 SERIES 9 ACTUATOR & LEGEND COLOR M Solid Color Actuator Legend 1 White Black 1 2 Black White 2 ACTUATOR 3 Red White Non-Illuminated single color 4 Green White A Angled B Flat 5 Blue White Two Color Visi-Rocker 6 Yellow Black D Indicate ON E Indicate OFF 7 Gray Black llluminated single color 8 Orange Black F Angled G Flat 6 Visi-Rocker Visi & Legend (remainder of rocker same color as bezel) 1 White 2 Black 3 Red 4 Green 5 Blue 6 Yellow 7 Gray 8 Orange 7 Illuminated Actuator Legend A Clear White B Red Transparent White C Green Transparent White D Amber Transparent White 3 POLES 1 One E Smoke Gray Transparent White F White Translucent Black 2 4 CIRCUIT 10 without Auxiliary Switch 10 LEGEND 1 No Legend (Single Color or Illuminated Rocker Options Only) B Series Trip (Current) 2 ON - OFF Vertical with Auxiliary Switch, Silver Contacts Terminal Type 3 ON - OFF Horizontal S Series Trip (Current) .060 Dia, Round Solder Turret 4 I - O Vertical 3 T Series Trip (Current) .058 Dia, Round Q.C. 5 I - O Horizontal 3, 13 U Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. 6 Dual Vertical with Auxiliary Switch, Gold Contacts 7 Dual Horizontal 3 4 Series Trip (Current) .058 Dia, Round Q.C. 3, 13 5 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. 8 11 BEZEL COLOR / STYLE Color without Rockerguard with Rockerguard 5 FREQUENCY & DELAY 14 DC Medium White A1 10 DC Instantaneous 72 DC, Short,Hi-Inrush Black B2 12 DC Short 74 DC, Medium, Hi-Inrush Gray G7 6 CURRENT RATING (AMPERES) 9 12 AGENCY APPROVAL 020 0.020 225 0.250 420 2.000 710 10.500 J UL489A Listed & TUV Certified 025 0.025 230 0.300 522 2.250 611 11.000 M UL Recognized & CSA Accepted 030 0.030 235 0.350 425 2.500 711 11.500 N TUV Certified, UL Recognized & CSA Accepted 035 0.035 240 0.400 527 2.750 612 12.000 T UL489A Listed 040 0.040 245 0.450 430 3.000 712 12.500 045 0.045 250 0.500 435 3.500 613 13.000 050 0.050 255 0.550 440 4.000 614 14.000 055 0.055 260 0.600 445 4.500 615 15.000 060 0.060 265 0.650 450 5.000 616 16.000 065 0.065 270 0.700 455 5.500 617 17.000 070 0.070 275 0.750 460 6.000 717 17.500 075 0.075 280 0.800 465 6.500 618 18.000 080 0.080 285 0.850 470 7.000 619 19.000 085 0.085 290 0.900 475 7.500 620 20.000 Notes: 1 One actuator is located in the center of each multi-pole breaker. 090 0.090 295 0.950 480 8.000 622 22.000 2 One Auxiliary Switch is supplied per breaker. Auxiliary Switch option limited to Series Trip & 095 0.095 410 1.000 485 8.500 624 24.000 Switch Only circuits, and is not available in single pole illuminated breakers, or with Back 210 0.100 512 1.250 490 9.000 625 25.000 Connected Screw or Push-in Stud terminals. 215 0.150 415 1.500 495 9.500 630 30.000 3 Mates with AMP .058" diameter pin receptacles: 60983-1 (gold plated) & 60983-1 (tin plated). 4 For neon bulb applications at 120VAC @ 47K, 1/4 WATT and for 250VAC applications @ 220 0.200 517 1.750 610 10.000 150K, 1/4 WATT, external resistors must be supplied by customer. 5 For LED (DC or rectified AC) applications, LED is mounted in the center of the rocker actua- 9 tor with electrical characteristics as follows: 100 millicandela at 20mA; Maximum power dis- 7 TERMINAL sipation = 75mW at 25°C; Maximum forward current = 25mA; Typical forward voltage = 11 1 Push-On 0.250 Tab (Q.C.) A Push-In Stud 2.1V at 20mA; Typical reverse current = 100uA at 3V. Customer supplies the proper exter- 12 2 Screw 8-32 w/upturned lugs P Printed Circuit Board nal resistor limiting current to these values. 3 Screw 8-32 (Bus Type) 6 On Visi-Rocker breakers, Visi portion of rocker cannot be the same color as the bezel. 7 Rocker color for LED’s and green neon lamp must be clear, smoke gray, white translucent or match color of LED or neon lamp. 8 ILLUMINATION 8 Other colors available. Consult factory. Non-illuminated A 9 TUV Certified to 25 amps. UL Recognized, CSA Accepted and UL489A Listed to 30 amps. 4 7 Screw Terminals recommended above 20 amps. Neon Neon Green Glow 10 UL489A Listed must have ON-OFF or Dual legends. TUV Certified approvals must have without resistor, 120VAC/250VACBC I - O or Dual legends. LED Red Green Amber 11 Terminal code A available with circuit codes A & B only. 5, 7 DG K 12 Printed circuit board available with UL recognized approval only. without resistor 13 Auxiliary switch (flat Q.C.) available with UL recognized approvals only. with resistor, 4-8 VDC EH L with resistor, 9-16 VDC FJ M 24 www.carlingtech.com M-Series Handle – Circuit & Terminal Diagrams Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. www.carlingtech.com 25 M-Series Handle – Form & Fit Drawings Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ± 0.20 [.51] unless otherwise specified. 26 www.carlingtech.com M-Series Handle – PC Terminal Diagrams Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. www.carlingtech.com 27 M-Series Pushbutton – Circuit & Terminal Diagrams Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 28 www.carlingtech.com M-Series Pushbutton – Form & Fit Drawings Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ± 0.20 [.51] unless otherwise specified. 3 Available with Push-Pull or Push-to-Reset Actuators. www.carlingtech.com 29 M-Series Push-Pull – PC Terminal Drawings Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 30 www.carlingtech.com M-Series Rocker – Circuit & Terminal Diagrams Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 3 Schematic shown represents current trip circuit. www.carlingtech.com 31 M-Series Rocker – Form & Fit Drawings Notes: 1 Dimensions apply to all variations shown. Notice that circuit breaker line & load terminal orientation on indicate OFF is opposite of indicate ON. 2 I-O, ON-OFF or dual legends available for vertical or horizontal mounting. For pole orientation with horizontal legend, rotate front view clockwise 90°. 3 All dimensions are in inches [millimeters]. 4 Tolerance ± 0.20 [.51] unless otherwise specified. 32 www.carlingtech.com M-Series Rocker – Supplementary Diagrams www.carlingtech.com 33