CARLING TECHNOLOGIES MF2-B-30-613-2-BB2-B-C

M-Series Circuit Breaker The M-Series is a low cost, miniature hydraulic/magnetic circuit breakers ideally designed for demanding applications requiring space saving features, aesthetics and snap-in front panel mounting. Its newest design features a compact, space saving, vertically mounted parallel pole configuration, which is UL489A listed up to 50 amps and is well suited for telecommunication equipment fitting in one rack unit. Furthermore, it features two uniquely designed terminals that provide the highest level of balanced circuit protection. In addition, these circuit breakers feature various styling options allowing for design flexibility. They are available in choices of rocker actuator styles and colors, including Features: paddle and baton style handle actuators, push-to-reset Š Parallel pole configuration well suited for one rack unit and push-pull pushbutton actuators, Visi-Rocker two color Š Compact design actuators as well as non-illuminated or illuminated rocker versions with LED or neon bulbs. The exclusive Rockerguard Applications: bezel helps prevent inadvertent actuation and wiping Š Communication equipment contact design insures long-term reliability. The M-Series Š Vehicles circuit breakers are available in 1 & 2 poles or parallel poles, Š Marine 0.02 to 50 amps, up to 250VAC or 80VDC with choices of Š Generators time delays, terminals, panel hardware, actuator styles, Š Power supplies colors, and imprinting. Š Medical equipment Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: sales@carlingtech.com • www.carlingtech.com | 2 M-Series Circuit Breaker - General Specifications Mechanical Electrical Maximum Voltage 125/250 VAC 50/60 Hz, 80 VDC Endurance 10,000 ON-OFF operations @ 6 (See Rating Tables.) per minute with rated Current and Current Ratings Standard current coils: 0.100, Voltage. 0.250, 0.500, 0.750, 1.00 thru 15.0 Trip Free All M-Series Circuit Breakers will in 1 amp increments, 18.0, 20.0, trip on overload, even when 25.0, 30.0. Other ratings available actuator is forcibly held in the ON - see Ordering Scheme. position. Auxiliary Switch Rating SPDT; 7A 250VAC, 7A (Res) Trip Indication The actuator moves positively 28VDC, 4A (Ind.) 28VDC, 0.25A to the OFF position when an 80VDC (Res) (silver contacts), overload causes the circuit 0.1A 125VAC (gold contacts). breaker to trip. Insulation Resistance Minimum of 100 Megohms at 500 Physical VDC. Number of Poles 1 or 2 Dielectric Strength UL, CSA 1500V, 50/60 Hz for one Internal Circuit Configs. Series with or without minute between all electrically Auxiliary Switch. isolated terminals. M-Series Switch Only with or without Circuit Breakers comply with the Auxiliary Switch. 8mm spacing and 3750 V 50/60Hz Weight Approximately 30 grams/pole dielectric requirements from (Approximately 1.07 ounces/pole) hazardous voltage to operator Standard Colors See Ordering Scheme.a accessible surfaces, per Publications IEC 380, 435, 950, EN 60950 and VDE 0805. Environmental Designed in accordance with requirements of specification Resistance, Impedance Values from Line to Load Terminal MIL PRF-55629 & MIL-STD-202G as follows: - based on Series Trip Circuit Breaker. Shock Withstands 100 Gs, 6ms, sawtooth while carrying rated current per RESISTANCE PER POLE VALUES from Line to Load Terminals Method 213, Cond. I. Instantaneous (Values Based on Series Trip Circuit Breaker) curves tested at 80% of rated current. Vibration Withstands 0.060” excursion CURRENT TOLERANCE from 10-55 Hz, and 10 Gs 55-500 (AMPS) (%) Hz, at rated current per Method 204C, Test Condition A. 0.10 - 20.0 ±25 Instantaneous curves tested at 20.1 - 50.0 ±35 80% of rated current. Moisture Resistance Method 106D, i.e., ten 24-hour cycles @ + 25°C to +65°C, 80- 98% RH. Salt Spray Method 101, Condition A (90-95% RH @ 5% NaCl Solution, 96 hrs). Thermal Shock Method 107D, Condition A (Five cycles @ -55°C to +25°C to +85°C to +25°C). Pulse Tolerance Curves Operating Temperature -40° C to +85° C Chemical Resistance Only the outside surfaces of the case and the handles may be cleaned with detergents or alcohol. Organic (hydrocarbon based) solvents are not recommended because they attack plastics. Caution should be taken when solvents are used to clean and remove flux from terminals. Lubricants should not be introduced into the handle/ bushing openings *Manufacturer reserves the right to change product specification without prior notice. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | M-Series Circuit Breaker - General Specifications 3 Electrical Tables Table A: Lists UL Recognized and CSA Accepted configurations & performance capabilities as a Component Supplementary Protector. Table A Notes: 1 Polarity Sensitive 2 Available only with Special Catalog Number. Consult Factory. 3 Requires Branch Circuit Backup with a UL Listed type K-5 or RK-5 fuse rated 30 Amps maximum 4 Requires Branch Circuit Backup with a UL Listed type K-5 or RK-5 fuse rated 60 Amps maximum Table B: Lists UL Recognized,CSA Accepted and TUV and VDE Certified configurations and performance capabilities as a Component Supplementary Protector. Table B Notes: 1 Polarity Sensitive 2 Available only with Special Catalog Number. Consult Factory. 3 Requires Branch Circuit Backup with a UL Listed type K-5 or RK-5 fuse rated 30 Amps maximum 4 TUV only, not VDE 5 Requires backup protection with a thermal magnetic circuit breaker rated 32 amps and having a Type C trip characteristic per EN60898/DIN VDE 0641 (C32A) for ratings greater than 15amps, and a thermal magnetic circuit breaker rated 16 amps and having a Type C trip characteristic per EN60898/DIN VDE 0641 (C16A) for ratings 15 amps and less 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 4 M-Series Circuit Breaker - General Specifications Electrical Tables Table C: Lists UL489A Listed and TUV Certified configurations and performance capabilities for use in Communications Equipment. M-SERIES TABLE C: UL489A Listed Table C Notes: 1 Available only with Special Caralog Number Table D: Lists UL489A Listed configurations and performance capabilities for use in Communications Equipment. M-SERIES TABLE D: Parallel Pole Construction UL489A Listed (COMMUNICATIONS EQUIPMENT - POLARITY SENSITIVE) INTERRUPTING CURRENT VOLTAGE CAPACITY (AMPS) RATING CIRCUIT POLES GENERAL CONFIGURATION BREAKING WITHOUT BACKUP PURPOSE MAX. RATING FREQUENCY FUSE AMPS UL489A 80 DC 31-50 2 600 SERIES 1 65 DC 31-50 2 1000 Table D Notes: 1. Available only with Special Catalog Number. Consult Factory. 1 Available only with Special Caralog Number Agency Certifications UL Recognized CSA Accepted Component Supplementary UL Standard 1077 Component Recognition Program Protector (Class 3215 30, File as Protectors, Supplementary 047848 0 000) (Guide CCN/QVNU2, File E75596) CSA Standard C22.2 No. 235 UL Listed VDE Certified EN60934, VDE 0642 under File UL Standard 489A Communications Equipment 10537 (Guide CCN/DITT, File E189195) EN60934, under License No. TUV Certified R9671109 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | M-Series Parallel Pole Rocker - Ordering Scheme 5 M E 2 P 650 5 A 1 2 B T D2 9 10 11 1 2 3 4 5 6 7 8 12 Series Actuator Poles Circuit Frequency Current Terminal Illumination Actuator Legend Bezel Agency & Delay Rating Color & Color Approval Legend 7 TERMINAL 1 SERIES A Push in Stud M 5 10-32 Screw (Bus Type) 2 ACTUATOR Single Color Rocker Two Color Visi-Rocker Single Color Translucent Rocker 8 ILLUMINATION A Angled D Indicate ON F Angled Non-Illuminated B Flat E Indicate OFF G Flat A Non-Illuminated 9 ACTUATOR COLOR & LEGEND 1 Actuator Visi Legend 1 White Black 2 Black White 3 Red White 4 Green White 5 Blue White 6 Yellow Black 3 POLES 7 Gray Black 2 Two 8 Orange Black 2 4 CIRCUIT/AUXILIARY SWITCH P Series Trip Current (Parallel Pole) 10 LEGEND with Auxiliary Switch, Silver Contacts 2 ON - OFF Vertical Q Series Trip Current (Parallel Pole) .110 x 0.20 Q.C 3 ON - OFF Horizontal with Auxiliary Switch, Gold Contacts 6 Dual Vertical R Series Trip Current (Parallel Pole) .110 x 0.20 Q.C 7 Dual Horizontal 5 FREQUENCY & TIME DELAY D2 DC Short 11 BEZEL COLOR D4 DC Medium A White without Rockerguard B Black without Rockerguard G Gray without Rockerguard 1 White with Rockerguard 6 CURRENT RATING (AMPERES) CODE AMPERES 2 Black with Rockerguard 631 31.000 7 Gray with Rockerguard 635 35.000 640 40.000 645 45.000 12 AGENCY APPROVAL 650 50.000 T UL 489A Listed Notes: 1 Reminder of Rocker same color as Visi 2 Aux Switch only available with screw terminals 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 6 M-Series Parallel Pole - Handle / Push Button - Ordering Scheme M M 2 P 650 5 1 B B B T D2 9 10 11 1 2 3 4 5 6 7 8 12 Series Actuator Poles Circuit Frequency Current Terminal Actuator Front Legend Brushing Agency & Delay Rating Color Panel Plate/ Color Approval Hardware Marking 9 FRONT PANEL HARDWARE 1 SERIES Handle M A No outer Panel Hardware B Knurled Nut, Bright Nickel 2 ACTUATOR C Knurled Nut, Bright Nickel w/Locking Ring M Paddle D Knurled Nut, Black T Push-Pull E Knurled Nut, Black w/Locking Ring F Panel Dress, Bright Nickel G Panel Dress, Bright Nickel w/Locking Ring 3 POLES H Panel Dress, Black 2 Two J Panel Dress, Black w/Locking Ring Push Button 1 No outer Panel Hardware 1 4 CIRCUIT/AUXILIARY SWITCH 2 Knurled Nut, Bright Nickel P Series Trip Current (Parallel Pole) with Auxiliary Switch, Silver Contacts Q Series Trip Current (Parallel Pole) .110 x 0.20 Q.C 10 LEGEND PLATE / BUTTON MARKING with Auxiliary Switch, Gold Contacts Handle Actuator Legend Plate R Series Trip Current (Parallel Pole) .110 x 0.20 Q.C B ON - OFF Vertical C ON - OFF Horizontal Push-Pull Actuator Legend Plate 5 FREQUENCY & TIME DELAY 2 Rated Amps Horizontal D2 DC Short 3 Rated Amps Line Side Down D4 DC Medium 4 Rated Amps Line Side Up 11 BUSHING COLOR 6 CURRENT RATING (AMPERES) CODE AMPERES B Black 631 31.000 635 35.000 640 40.000 12 AGENCY APPROVAL 645 45.000 T UL 489A Listed 650 50.000 Notes: 1 Aux Switch only available with screw terminals 7 TERMINAL A Push in Stud 5 10-32 Screw (Bus Type) 8 ACTUATOR COLOR & LEGEND Handle Push Button 1 White A White 2 Black B Black 3 Red C Red 4 Green D Green 5 Blue E Blue 6 Yellow F Yellow 7 Gray G Gray 8 Orange H Orange 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | M-Series Parallel Pole - Form & Fit Drawings 7 LET REVISIONS DATE RELEASED PER A 5-10-12 PARALLEL POLE TERMINAL OPTIONS ECO 16976 PUSH-IN STUD 10-32 SCREW W/ BUS BAR .652 [16.56] 1.125 [28.58] .912 [23.16] 1.000 [25.4] .838 [21.29] .154 [3.91] .393 [9.97] 1.000 [25.4] .100 [2.54] .750 [19.05] ROCKER ACTUATOR DETAIL INDICATE "ON" (VISI-ON) .370 [9.40] MAX. ±.020 [±.508] ±.020 [±.508] 1.394 [35.41] 1.530 [38.86] 1.304 [33.12] LINE OFF 1.375 [34.93] .970 [24.64] 1.560 [39.62] 1.125 [28.58] ON LOAD .625 [15.88] .100 [2.54] .400 [10.16] ROCKERGUARD CONFIGURATION INDICATE "OFF" (VISI-OFF) & SINGLE COLOR ±.020 ±.508 ±.020 ±.508 .675 [17.14] .305 [7.75] NOTES: LOAD LOAD 1. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. ON ON ±.020 ±.508 2. TOLERANCE ±.010 [.25] UNLESS OTHERWISE SPECIFIED. 1.050 [26.67] 3. DIMENSIONS APPLY TO BOTH ROCKER STYLES. OFF OFF LINE LINE 4. I-O, ON-OFF OR DUAL LEGENDS AVAILABLE FOR VERTICAL OR HORIZONTAL MOUNTING. 5. NOTICE THAT CIRCUIT BREAKER LINE AND LOAD TERMINAL PANEL CUT - OUT DETAIL (ROCKER) ORIENTATION ON INDICATE "OFF" IS OPPOSITE THAT OF DOUBLE POLE INDICATE "ON". DIM. A PANEL +.005 +.13 THICKNESS -.000 -.00 TITLE .062 [1.57] 1.385 [35.18] DIM. A M SERIES PARALLEL POLE .093 [2.36] 1.420 [36.07] FORM & FIT DIAGRAMS .125 [3.18] 1.460 [37.08] ±.005 ±.13 1.139 [33.76] DR BY APVD BY DWG NO REV ME CLA-8121 A 5/10/12 SHT OF 1 3 Notes: 1 ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 2 TOLERANCE ±.010 [.25] UNLESS OTHERWISE SPECIFIED. 3 DIMENSIONS APPLY TO BOTH ROCKER STYLES. 4 I-O, ON-OFF OR DUAL LEGENDS AVAILABLE FOR VERTICAL OR HORIZONTAL MOUNTING. 5 NOTICE THAT CIRCUIT BREAKER LINE AND LOAD TERMINAL ORIENTATION ON INDICATE “OFF” IS OPPOSITE THAT OF INDICATE “ON”. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 8 M-Series Parallel Pole - Form & Fit Drawings LET REVISIONS DATE LET REVISIONS DATE RELEASEDPER RELEASED PER 5-10-12 A A 5-10-12 ECO16976 ECO 16976 PADDLE ACTUATOR STYLE PUSH-PULL ACTUATOR STYLE 1.484 1.395 1/2-32THD. 3/8" 8-32 THD. 12° ON ACTUATOR COLOR OFF FLAT VISIBLE IN OFF POSITION ONLY 12° ±.030 ±.76 .500 [12.70] OFF (SHOWN) .400 [10.16] FLAT ±.030 ±.76 ±.030 ±.76 .470[11.94] .280 [7.11] ON ±.030 ±.76 .500[12.70] MOUNTING DETAILS PANEL HARDWARE MOUNTING DETAILS .494 .098 +.010 +.25 +.010 +.25 -.000 -.000 -.000 -.000 [2.49] [12.55] +.010 +.25 .500DIA [Ø12.70] .500DIA [Ø12.70] -.000 -.00 ±.002 ±.05 .375 [9.53] .162 [4.11] DIA PUSH-PULL, +.010 +.25 ±.005 [±.13] -.000 -.000 PUSH TO RESET HEX NUT ±.002 [±.050] .355[9.02] .125DIA [Ø3.18] .222[5.64] .544[13.82] WITHLOCKINGRING WITHOUTLOCKINGRING .156 .625 [15.87] DIA [3.56] .534 .078 [13.56] [1.98] LEGEND PLATES SNAP-IN BUSHING .435 [11.05] DIA .025[.64] .632DIA [Ø16.05] .340[8.64] PANEL DRESS NUT 0N O O 1.025[26.04] F N F BUTTON MARKING ORIENTATION 0FF LINE B C LEGEND CODE: 20 LINE 20 20 PANEL HARDWARE LINE .625[15.88] .680DIA [Ø17.27] MARKING 2 3 4 CODE: .125[3.18] .180[4.57] NOTES: NOTES: .110QC AUXILIARY SWITCH TERMINALS 1. ALLDIMENSIONSAREININCHES[MILL1. IMETE ALL DIMENSION RS]. S ARE IN INCHES [MILLIMETERS]. 2. TOLERANCE ±.010 [.25]UNLESS OTHERWIS 2. TOE LERANC SPECIFIED E ±.01 . 0 [.25] UNLESS OTHERWISE SPECIFIED. 3. DIMENSIONSAPPLYTOBOTHROCKER 3.STYLES DIMENSION . S APPLY TO BOTH ROCKER STYLES. HEXNUT PANELDRESSNUT 4. I-O,ON-OFF ORDUALLEGENDSAVAIL4. AB I-O LE,FO ON-OF R F OR DUAL LEGENDS AVAILABLE FOR VERTICALORHORIZONTALMOUNTING. VERTICAL OR HORIZONTAL MOUNTING. .680DIA [Ø17.27] .105[2.67] .342[8.69] 5. NOTICETHATCIRCUITBREAKERLINE5. AN ND OTI LOA CEDTHA TERMINA T CIRCUI L T BREAKER LINE AND LOAD TERMINAL .125[3.18] ORIENTATIONON INDICATE"OFF"ISOPPOSIT ORIENTATIO ETHATNO OFN INDICATE "OFF" IS OPPOSITE THAT OF INDICATE"ON". INDICATE "ON". .031[.79] .683DIA [Ø17.27] TITLE TITLE M SERIES PARALLEL POLE M SERIES PARALLEL POLE KNURLEDNUT LOCKINGRING FORM & FIT DIAGRAMS FORM & FIT DIAGRAMS DR BY APVD BY DWG NO REV DR BY APVD BY DWG NO REV Notes: ME ME CLA-8121 CLA-8121 1 ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 2 TOLERANCE ±.010 [.25] UNLESS OTHERWISE SPECIFIED. A A 5/10/12 5/10/12 SHT OF SHT 2 OF 3 3 3 3 DIMENSIONS APPLY TO BOTH ROCKER STYLES. 4 I-O, ON-OFF OR DUAL LEGENDS AVAILABLE FOR VERTICAL OR HORIZONTAL MOUNTING. 5 NOTICE THAT CIRCUIT BREAKER LINE AND LOAD TERMINAL ORIENTATION ON INDICATE “OFF” IS OPPOSITE THAT OF INDICATE “ON”. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | M-Series Handle/Pushbutton UL Recognized - Ordering Scheme 9 M M 1 B 34 260 1 1 B B C B 8 9 10 11 12 1 2 3 4 5 6 7 Series Actuator Poles Circuit Frequency Current Terminal Actuator Front Panel Legend Bushing Agency & Delay Rating Color Hardware Plate Color Approval 8 6 CURRENT RATING (AMPERES) 1 SERIES CODE AMPERES M 020 0.020 225 0.250 420 2.000 710 10.500 025 0.025 230 0.300 522 2.250 611 11.000 1 030 0.030 235 0.350 425 2.500 711 11.500 2 ACTUATOR 035 0.035 240 0.400 527 2.750 612 12.000 040 0.040 245 0.450 430 3.000 712 12.500 Handle 045 0.045 250 0.500 435 3.500 613 13.000 M Paddle N Baton 050 0.050 255 0.550 440 4.000 614 14.000 055 0.055 260 0.600 445 4.500 615 15.000 060 0.060 265 0.650 450 5.000 616 16.000 Push Button 065 0.065 270 0.700 455 5.500 617 17.000 T Push-Pull U Push To Reset 070 0.070 275 0.750 460 6.000 618 18.000 075 0.075 280 0.800 465 6.500 620 20.000 080 0.080 285 0.850 470 7.000 622 22.000 Push Button w/ Snap-In Mounting 085 0.085 290 0.900 475 7.500 624 24.000 V Push-Pull W Push To Reset 090 0.090 295 0.950 480 8.000 625 25.000 090 0.095 410 1.000 485 8.500 630 30.000 210 0.100 512 1.250 490 9.000 215 0.150 415 1.500 495 9.500 3 POLES 220 0.200 517 1.750 610 10.000 1 One 2 Two 8 7 TERMINAL 2 11 4 CIRCUIT 1 Push-On 0.250 Tab (Q.C.) A Push-In Stud 10 12 without Auxiliary Switch 2 Screw 8-32 w/upturned lugs P Printed Circuit Board 10 A Switch Only (no coil) , Maintained Contacts 3 Screw 8-32 (Bus Type) B Series Trip (Current) with Auxiliary Switch, Silver Contacts Terminal Type: 5 M Series Trip (Current) Aux Switch .110 QC x .020 QC 8 ACTUATOR COLOR & LEGEND 3 P Switch Only, Maintained Contacts .060 Dia, Round Solder Turret Gloss Handle Push-Button Actuator Color 3,4 Q Switch Only, Maintained Contacts .058 Dia, Round Q.C. 1 A White 3,13 R Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C. 2 B Black 3 S Series Trip (Current) .060 Dia, Round Solder Turret 3 C Red 3,4 T Series Trip (Current) .058 Dia, Round Q.C. 4 D Green 3,13 U Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. 5 E Blue with Auxiliary Switch, Gold Contacts 6 F Yellow 3,4 2 Switch Only, Maintained Contacts .058 Dia, Round Q.C. 8 H Orange 3,13 3 Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C. 3,4 4 Series Trip (Current) .058 Dia, Round Q.C. 3,13 5 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. 6 9 FRONT PANEL HARDWARE 9 Series Trip (Current) Aux Switch .110 QC x .020 QC Handle Push-Button No outer Panel Hardware A 1 Knurled Nut 5 FREQUENCY & DELAY 32 DC, 50/60Hz Short Bright nickel B 2 03 DC 50/60Hz, Switch Only 34 DC, 50/60Hz Medium Bright nickel with locking ring C 10 DC Instantaneous 62 50/60Hz Short, Hi-Inrush Black D 12 DC Short 64 50/60Hz Medium, Hi-Inrush Black with locking ring E 14 DC Medium 72 DC, Short,Hi-Inrush Panel Dress Nut 20 50/60Hz Instantaneous 74 DC,Medium, Hi-Inrush Bright nickel F 22 50/60Hz Short 92 DC, 50/60Hz Short, Hi-Inrush Bright nickel with locking ring G 24 50/60Hz Medium 94 DC, 50/60Hz Medium, Black H 30 DC, 50/60Hz Instantaneous Hi-Inrush Black with locking ring J 10 LEGEND PLATE / BUTTON MARKING Handle Actuator Legend Plate (Actuator Styles M & N) A No Legend Plate B ON - OFF Vertical C ON - OFF Horizontal D I - O Vertical E I - O Horizontal Push-Pull Actuator Button Cap (Actuator Styles T & V) 1 No Marking Notes: 2 Rated Amps Horizontal 1 One actuator is located in the center of each multi-pole breaker. Actuator codes V & W limited 3 Rated Amps Line Side Down to single pole breakers only. 4 Rated Amps Line Side Up 2 Switch Only circuits are not available with Push-To-Reset actuators. For Switch Only circuits, select Current Coil Rating from the above chart: Push-to-Reset Actuator Button (Actuator Styles U& W) 3 One Auxiliary Switch is supplied per breaker. On two-pole breakers, standard Auxiliary Switch 1 No Marking mounting is in pole one. Auxiliary Switch option limited to Series Trip and Switch Only circuits. Not available with back connect screw or push-in stud terminals. 4 Mates with AMP .058” diameter pin receptacles including 60983-1 (gold plated) 7 11 BUSHING COLOR and 60983-2 (tin plated). B Black 5 Actuator color is only visible in the OFF position on Push-Pull actuators. 6 All units except snap-in mounting have one hex nut installed on bushing for use behind the panel. 9 12 AGENCY APPROVAL 7 Other colors available. Consult factory. C UL Recognized & CSA Accepted 8 TUV and VDE Certification above 15 amps is for 2-pole only and is limited to a max. of 20 amps. Screw Terminal or Push-In Stud recommended above 20 amps. D VDE Certified, UL Recognized & CSA Accepted 9 30 amp rating not available with delay’s 30, 32, 34, 92 or 94. E TUV Certified, UL Recognized & CSA Accepted 10 Screw Terminals are VDE certified only with use of ring terminal attached to wire. 11 Terminal code A available with circuit codes A & B only. 12 Printed circuit board available with UL recognized approval only. 13 Auxiliary switch (flat Q.C.) available with UL recognized approvals only. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 10 M-Series Handle/Pushbutton UL489A/UL Recognized – Ordering Scheme M M 1 B 14 620 1 1 B B B J 8 9 10 11 12 1 2 3 4 5 6 7 Series Actuator Poles Circuit Frequency Current Terminal Actuator Front Panel Legend Bushing Agency & Delay Rating Color Hardware Plate Color Approval 4 7 TERMINAL 1 SERIES 10 1 Push-On 0.250 Tab (Q.C.) A Push-In Stud M 11 2 Screw 8-32 w/upturned lugs P Printed Circuit Board 3 Screw 8-32 (Bus Type) 1 2 ACTUATOR 5 Handle 8 ACTUATOR COLOR & LEGEND M Paddle N Baton Gloss Handle Push-Button Actuator Color 1 A White 2 B Black Push Button 3 C Red 8 T Push-Pull U Push To Reset 4 D Green 5 E Blue 6 F Yellow Push Button w/ Snap-In Mounting 8 H Orange 8 V Push-Pull W Push To Reset 6 9 FRONT PANEL HARDWARE Handle Push-Button No outer Panel Hardware A 1 Knurled Nut 3 POLES Bright nickel B 2 1 One Bright nickel with locking ring C Black D Black with locking ring E 4 CIRCUIT Panel Dress Nut without Auxiliary Switch Bright nickel F B Series Trip (Current) Bright nickel with locking ring G with Auxiliary Switch, Silver Contacts Terminal Type: Black H M Series Trip (Current) Aux Switch .110 QC x .020 QC 2 Black with locking ring J S Series Trip (Current) .060 Dia, Round Solder Turret 2,3 T Series Trip (Current) .058 Dia, Round Q.C. 3,12 U Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. with Auxiliary Switch, Gold Contacts 10 LEGEND PLATE / BUTTON MARKING 2,3 4 Series Trip (Current) .058 Dia, Round Q.C. Handle Actuator Legend Plate (Actuator Styles M & N) 3,12 5 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. A No Legend Plate 9 Series Trip (Current) Aux Switch .110 QC x .020 QC B ON - OFF Vertical C ON - OFF Horizontal D I - O Vertical E I - O Horizontal 5 FREQUENCY & DELAY 14 DC Medium Push-Pull Actuator Button Cap (Actuator Styles T & V) 10 DC Instantaneous 72 DC, Short,Hi-Inrush 8 1 No Marking 12 DC Short 74 DC,Medium, Hi-Inrush 2 Rated Amps Horizontal 3 Rated Amps Line Side Down 4 Rated Amps Line Side Up 6 CURRENT RATING (AMPERES) CODE AMPERES Push-to-Reset Actuator Button (Actuator Styles U& W) 8 020 0.020 225 0.250 420 2.000 710 10.500 1 No Marking 025 0.025 230 0.300 522 2.250 611 11.000 030 0.030 235 0.350 425 2.500 711 11.500 7 035 0.035 240 0.400 527 2.750 612 12.000 11 BUSHING COLOR 040 0.040 245 0.450 430 3.000 712 12.500 B Black 045 0.045 250 0.500 435 3.500 613 13.000 050 0.050 255 0.550 440 4.000 614 14.000 9 055 0.055 260 0.600 445 4.500 615 15.000 12 AGENCY APPROVAL 060 0.060 265 0.650 450 5.000 616 16.000 J UL489A Listed, TUV Certified 065 0.065 270 0.700 455 5.500 617 17.000 M UL Recognized, CSA Accepted 070 0.070 275 0.750 460 6.000 618 18.000 N UL Recognized, TUV Certified 075 0.075 280 0.800 465 6.500 620 20.000 T UL489A Listed 080 0.080 285 0.850 470 7.000 622 22.000 085 0.085 290 0.900 475 7.500 624 24.000 090 0.090 295 0.950 480 8.000 625 25.000 090 0.095 410 1.000 485 8.500 630 30.000 210 0.100 512 1.250 490 9.000 215 0.150 415 1.500 495 9.500 220 0.200 517 1.750 610 10.000 Notes: 1 One actuator is located in the center of each multi-pole breaker. Actuator codes V & W limited to single pole breakers only. 2 One Auxiliary Switch is supplied per breaker. On two-pole breakers, standard Auxiliary Switch mounting is in pole one. Auxiliary Switch option limited to Series Trip and Switch Only circuits. Not available with Back Connected Screw or Push-in Stud terminals. 3 Mates with AMP .058” diameter pin receptacles including 60983-1 (gold plated) and 60983-3 (tin plated). 4 Screw terminals or Push-in Stud recommended above 20 amps. 5 Actuator color is only visible in the OFF position on Push-Pull actuators. 6 All units have one hex nut installed on bushing for use behind the panel. 7 Other colors available. Consult factory. 8 Not available with UL489A Listed breakers. 9 TUV certified to 25 amps. UL Recognized, CSA Accepted and UL Listed to 30 amps. 10 Terminal code A available with circuit codes A & B only. 11 Printed circuit board available with UL recognized approval only. 12 Auxiliary switch (flat Q.C.) available with UL recognized approvals only. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | M-Series Handle – Circuit & Terminal Diagrams 11 Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 12 M-Series Handle – PC Terminal Diagrams Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | M-Series Handle - Form & Fit Drawings 13 Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 14 M-Series Pushbutton – Circuit & Terminal Diagrams Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | M-Series Pushbutton – Form & Fit Drawings 15 Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ± 0.20 [.51] unless otherwise specified. 3 Available with Push-Pull or Push-to-Reset Actuators 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 16 M-Series Push-Pull – PC Terminal Drawings Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | M-Series Rocker UL Recognized – Ordering Scheme 17 M G 2 B 34 620 1 H C 6 7 C 1 2 3 4 5 6 7 8 9 10 11 12 Series Actuator Poles Circuit Frequency Current Rating Terminal Illumination Actuator Legend Bezel Color Agency & Delay Color Approval 6 CURRENT RATING (AMPERES) 1 SERIES CODE AMPERES M 020 0.020 225 0.250 420 2.000 710 10.500 025 0.025 230 0.300 522 2.250 611 11.000 1 030 0.030 235 0.350 425 2.500 711 11.500 2 ACTUATOR 035 0.035 240 0.400 527 2.750 612 12.000 Non-Illuminated Two Color illuminated 040 0.040 245 0.450 430 3.000 712 12.500 single color Visi-Rocker single color 045 0.045 250 0.500 435 3.500 613 13.000 A Angled D Indicate ON F Angled 050 0.050 255 0.550 440 4.000 614 14.000 B Flat E Indicate OFF G Flat 055 0.055 260 0.600 445 4.500 615 15.000 060 0.060 265 0.650 450 5.000 616 16.000 065 0.065 270 0.700 455 5.500 617 17.000 070 0.070 275 0.750 460 6.000 618 18.000 075 0.075 280 0.800 465 6.500 620 20.000 080 0.080 285 0.850 470 7.000 622 22.000 085 0.085 290 0.900 475 7.500 624 24.000 090 0.090 295 0.950 480 8.000 625 25.000 12 090 0.095 410 1.000 485 8.500 630 30.000 210 0.100 512 1.250 490 9.000 215 0.150 415 1.500 495 9.500 220 0.200 517 1.750 610 10.000 3 POLES 1 One 2 Two 7 TERMINAL 2 14 4 CIRCUIT 1 Push-On 0.250 Tab (Q.C.) A Push-In Stud 10 15 without Auxiliary Switch 2 Screw 8-32 w/upturned lugs P Printed Circuit Board 10 ( ) , Maintained Contacts A Switch Only no coil 3 Screw 8-32 (Bus Type) B Series Trip (Current) with Auxiliary Switch, Silver Contacts Terminal Type: M Series Trip (Current) Aux Switch .110 QC x .020 QC 8 ROCKER ILLUMINATION 3 P Switch Only, Maintained Contacts .060 Dia, Round Solder Turret Non-illuminated A 3,4 5 8 Q Switch Only, Maintained Contacts .058 Dia, Round Q.C. Neon Neon Green Glow 3,16 R Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C. without resistor, 120VAC/250VAC B C 3 7, 8 S Series Trip (Current) .060 Dia, Round Solder Turret LED Red Green Amber 3,4 T Series Trip (Current) .058 Dia, Round Q.C. without resistor D G K 3,16 U Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. with resistor, 4-8 VDC E H L with Auxiliary Switch, Gold Contacts with resistor, 9-16 VDC F J M 3,4 2 Switch Only, Maintained Contacts .058 Dia, Round Q.C. 3,16 3 Switch Only, Maintained Contacts .080 Dia x .020 Flat Q.C. 3,4 4 Series Trip (Current) .058 Dia, Round Q.C. 9 ACTUATOR & LEGEND COLOR 3,16 5 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. Solid Color Actuator Legend 9 Series Trip (Current) Aux Switch .110 QC x .020 QC 1 White Black 2 Black White 3 Red White 5 FREQUENCY & DELAY 32 DC, 50/60Hz Short 4 Green White 03 DC 50/60Hz, Switch Only 34 DC, 50/60Hz Medium 5 Blue White 10 DC Instantaneous 62 50/60Hz Short, Hi-Inrush 6 Yellow Black 12 DC Short 64 50/60Hz Medium, Hi-Inrush 7 Gray Black 14 DC Medium 72 DC, Short,Hi-Inrush 8 Orange Black 20 50/60Hz Instantaneous 74 DC,Medium, Hi-Inrush 6 Visi-Rocker Visi & Legend (remainder of rocker same color as bezel) 22 50/60Hz Short 92 DC, 50/60Hz Short, Hi-Inrush 1 White 24 50/60Hz Medium 94 DC, 50/60Hz Medium, 2 Black 30 DC, 50/60Hz Instantaneous Hi-Inrush 3 Red 4 Green 5 Blue 6 Yellow 7 Gray 8 Orange 8 Illuminated Actuator Legend A Clear White B Red Transparent White Notes: C Green Transparent White 1 One actuator is located in the center of each multi-pole breaker. 2 For Switch Only circuits, select Current Coil Rating from the above chart: D Amber Transparent White 3 One Auxiliary Switch is supplied per breaker. On two-pole breakers, standard Auxiliary E Smoke Gray Transparent White Switch mounting is in pole one. Auxiliary Switch option limited to Series Trip & Switch Only F White Translucent Black circuits, & is not available in single pole illuminated breakers, or Back Connected Screw or Push-in Stud terminals. 4 Mates with AMP .058” diameter pin receptacles: 60983-1 (gold plated) & 60983-2 11 (tin plated). 10 LEGEND 4 I - O Vertical 5 For neon bulb applications at 120VAC @ 47K, 1/4 WATT and for 250VAC applications @ 1 No Legend 5 I - O Horizontal 150K, 1/4 WATT, external resistors must be supplied by customer. 2 ON - OFF Vertical 6 Dual Vertical 6 On Visi-Rocker breakers, Visi portion of rocker cannot be the same color as the bezel. 3 ON - OFF Horizontal 7 Dual Horizontal 7 For LED (DC or rectified AC) applications, LED is mounted in the center of the rocker actuator with electrical characteristics: 100 millicandela at 20mA; Maximum power dissipation = 75mW at 25°C; Maximum forward current = 25mA; Typical forward voltage = 2.1V at 20mA; Typical reverse current = 100uA at 3V. Customer supplies the proper 9 11 BEZEL COLOR / STYLE external resistor limiting current to these values. Color without Rockerguard with Rockerguard 8 Rocker color for LED’s and green neon lamp must be clear, smoke gray, white translucent or White A 1 match color of LED or neon lamp. 9 Other colors available. Consult factory. Black B 2 10 TUV 20A, VDE 15A. UL Recognized and CSA Accepted to 30 amps. Gray G 7 Screw Terminals or Push-in Stud recommended above 20 amps. 11 TUV or VDE Certified must have I-O or Dual Legends. Legend required on Visi-Rocker breakers. 10 12 AGENCY APPROVAL 12 30 amp rating not available with delay’s 30, 32, 34, 92 or 94. 13 Screw Terminals are VDE certified only with use of ring terminal attached to wire. C UL Recognized & CSA Accepted 14 Terminal code A available with circuit codes A & B only. D VDE Certified, UL Recognized & CSA Accepted 15 Printed circuit board available with UL recognized approval only. E TUV Certified, UL Recognized & CSA Accepted 16 Auxiliary switch (flat Q.C.) available with UL recognized approvals only. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 18 M-Series Rocker UL489A/UL Recognized – Ordering Scheme M A 1 B 14 620 1 A 1 6 2 J 1 2 3 4 5 6 7 8 9 10 11 12 Series Actuator Poles Circuit Frequency Current Rating Terminal Illumination Actuator Legend Bezel Color Agency & Delay Color Approval 9 7 TERMINAL 1 SERIES 11 1 Push-On 0.250 Tab (Q.C.) A Push-In Stud M 12 2 Screw 8-32 w/upturned lugs P Printed Circuit Board 3 Screw 8-32 (Bus Type) 1 2 ACTUATOR Non-Illuminated Two Color llluminated single color Visi-Rocker single color 8 ILLUMINATION A Angled D Indicate ON F Angled Non-illuminated A 4 8 B Flat E Indicate OFF G Flat Neon Neon Green Glow without resistor, 120VAC/250VAC B C 7, 8 LED Red Green Amber without resistor D G K with resistor, 4-8 VDC E H L with resistor, 9-16 VDC F J M 9 ACTUATOR & LEGEND COLOR Solid Color Actuator Legend 1 White Black 3 POLES 2 Black White 1 One 3 Red White 4 Green White 5 Blue White 2 4 CIRCUIT 6 Yellow Black without Auxiliary Switch 7 Gray Black B Series Trip (Current) 8 Orange Black with Auxiliary Switch, Silver Contacts Terminal Type: 6 Visi-Rocker Visi & Legend (remainder of rocker same color as bezel) M Series Trip (Current) Aux Switch .110 QC x .020 QC 1 White S Series Trip (Current) .060 Dia, Round Solder Turret 2 Black 3 T Series Trip (Current) .058 Dia, Round Q.C. 3 Red 3,13 U Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. 4 Green with Auxiliary Switch, Gold Contacts 5 Blue 3 4 Series Trip (Current) .058 Dia, Round Q.C. 6 Yellow 3,13 5 Series Trip, Maintained Contacts .080 Dia x .020 Flat Q.C. 7 Gray 9 Series Trip (Current) Aux Switch .110 QC x .020 QC 8 Orange 7 Illuminated Actuator Legend A Clear White 5 FREQUENCY & DELAY 14 DC Medium B Red Transparent White 10 DC Instantaneous 72 DC, Short,Hi-Inrush C Green Transparent White 12 DC Short 74 DC,Medium, Hi-Inrush D Amber Transparent White E Smoke Gray Transparent White 8 F White Translucent Black 6 CURRENT RATING (AMPERES) CODE AMPERES 020 0.020 225 0.250 420 2.000 710 10.500 10 025 0.025 230 0.300 522 2.250 611 11.000 10 LEGEND 030 0.030 235 0.350 425 2.500 711 11.500 1 No Legend (Single Color or Illuminated Rocker Options Only) 035 0.035 240 0.400 527 2.750 612 12.000 2 ON - OFF Vertical 040 0.040 245 0.450 430 3.000 712 12.500 3 ON - OFF Horizontal 045 0.045 250 0.500 435 3.500 613 13.000 4 I - O Vertical 050 0.050 255 0.550 440 4.000 614 14.000 5 I - O Horizontal 055 0.055 260 0.600 445 4.500 615 15.000 6 Dual Vertical 060 0.060 265 0.650 450 5.000 616 16.000 7 Dual Horizontal 065 0.065 270 0.700 455 5.500 617 17.000 070 0.070 275 0.750 460 6.000 618 18.000 8 075 0.075 280 0.800 465 6.500 620 20.000 11 BEZEL COLOR / STYLE 080 0.080 285 0.850 470 7.000 622 22.000 Color without Rockerguard with Rockerguard 085 0.085 290 0.900 475 7.500 624 24.000 White A 1 090 0.090 295 0.950 480 8.000 625 25.000 Black B 2 090 0.095 410 1.000 485 8.500 630 30.000 Gray G 7 210 0.100 512 1.250 490 9.000 215 0.150 415 1.500 495 9.500 9 220 0.200 517 1.750 610 10.000 12 AGENCY APPROVAL J UL489A Listed & TUV Certified Notes: 1 One actuator is located in the center of each multi-pole breaker. M UL Recognized & CSA Accepted 2 One Auxiliary Switch is supplied per breaker. Auxiliary Switch option limited to Series Trip N TUV Certified, UL Recognized & CSA Accepted & Switch Only circuits, and is not available in single pole illuminated breakers, or with Back T UL489A Listed Connected Screw or Push-in Stud terminals. 3 Mates with AMP .058” diameter pin receptacles: 60983-1 (gold plated) & 60983-1 (tin plated). 4 For neon bulb applications at 120VAC @ 47K, 1/4 WATT and for 250VAC applications @ 150K, 1/4 WATT, external resistors must be supplied by customer. 5 For LED (DC or rectified AC) applications, LED is mounted in the center of the rocker actuator with electrical characteristics as follows: 100 millicandela at 20mA; Maximum power dissipation = 75mW at 25°C; Maximum forward current = 25mA; Typical forward voltage = 2.1V at 20mA; Typical reverse current = 100uA at 3V. Customer supplies the proper external resistor limiting current to these values. 6 On Visi-Rocker breakers, Visi portion of rocker cannot be the same color as the bezel. 7 Rocker color for LED’s and green neon lamp must be clear, smoke gray, white translucent or match color of LED or neon lamp. 8 Other colors available. Consult factory. 9 TUV Certified to 25 amps. UL Recognized, CSA Accepted and UL489A Listed to 30 amps. Screw Terminals recommended above 20 amps. 10 UL489A Listed must have ON-OFF or Dual legends. TUV Certified approvals must have I - O or Dual legends. 11 Terminal code A available with circuit codes A & B only. 12 Printed circuit board available with UL recognized approval only. 13 Auxiliary switch (flat Q.C.) available with UL recognized approvals only. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | M-Series Rocker – Circuit & Terminal Diagrams 19 Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 3 Schematic shown represents current trip circuit. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 20 M-Series Rocker – Form & Fit Drawings Notes: 1 Dimensions apply to all variations shown. Notice that circuit breaker line & load terminal orientation on indicate OFF is opposite of indicate ON. 2 I-O, ON-OFF or dual legends available for vertical or horizontal mounting. For pole orientation with horizontal legend, rotate front view clockwise 90°. 3 All dimensions are in inches [millimeters]. 4 Tolerance ± 0.20 [.51] unless otherwise specified. 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | M-Series Rocker – Supplementary Diagrams 21 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com | 22 M-Series Circuit Breaker - Time Delay Curve Notes: 1 Delay Curves 12,14, 22, 24, 32, 34, 62, 64, 72, 74, 92, 94: Breakers to hold 100% and must trip at 135% of rated current and greater within the time limit shown in this curve. 2 Delay Curves 10, 20, 30: Breakers to hold 100% and must trip at 150% of rated current and greater within the time limit shown in this curve. 3 All Curves: Curve data shown represents breaker response at ambient temperature of 77°F (25°C) with no preloading. Breakers are mounted in standard wall-mount position. 4 The minimum inrush pulse tolerance handling capability is 12 times the rated current on standard delays and 18 times the rated current on high inrush delays. These values are based on a 60 Hz 1/2 cycle, 8.33 ms pulse. High inrush delays should be specified for applications with high initial surge currents of short duration, such as switching power supplies, highly capacitive loads and transformer loads. Dual Rated AC/DC Instantaneous Short Short D2 Medium Medium D4 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com | Notes 23 * Intentionally left blank 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231 Email: sales@carlingtech.com • www.carlingtech.com Email: sales@carlingtech.com • www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue • Plainville, CT 06062 Phone: (860) 793-9281 • Fax: (860) 793-9231 Email: sales@carlingtech.com • www.carlingtech.com East Region Sales Office, CT • ersm@carlingtech.com Midwest Region Sales Office, IL • mrsm@carlingtech.com West Region Sales Office, CA • wrsm@carlingtech.com Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Kowloon, Hong Kong Int + 852-2737-2277 • Fax: Int + 852-2736-9332 Email: sales@carlingtech.com.hk Shenzhen, China • shenzhen@carlingtech.com Shanghai, China • shanghai@carlingtech.com Pune, India • india@carlingtech.com Kaohsiung, Taiwan • taiwan@carlingtech.com Yokohama, Japan • japan@carlingtech.com Europe/Middle East/Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Int + 44 1392-364422 • Fax: Int + 44 1392-364477 Email: ltd.sales@carlingtech.com GmbH, Germany • gmbh@carlingtech.com SAS, France • sas@carlingtech.com REV_CB_M_07_2014