CARLING TECHNOLOGIES QF2-B-34-610-2-BB2-B-C

Time Delay Values (M and Q Series) Dual Rated AC/DC 10000 Instantaneous CURVE 10: D.C. CURVE 20: 50/60 HZ CURVE 30: D.C.,50/60 HZ 1000 100 10 1 .1 .01 .001 100 200 300 400 500 600 700 800 900 1000 1100 1200 NOTE 1,3 150 NOTES 1,3 PERCENT OF RATED CURRENT 10000 CURVE 12: D.C. Short CURVE 22: 50/60 HZ CURVES 32 & 92: D.C.,50/60 HZ 1000 10 0 10 1 .1 .01 .001 100 200 300 400 500 600 700 800 900 1000 1100 1200 135 150 NOTES NOTE 2, 3, 4 2,3,4 PERCENT OF RATED CURRENT 10000 CURVE 14: D.C. Medium CURVE 24: 50/60 HZ CURVES 34 & 94: D.C.,50/60 HZ 1000 10 0 10 1 .1 .01 .001 100 200 300 400 500 600 700 800 900 1000 1100 1200 135 150 PERCENT OF RATED CURRENT NOTES 2,3,4 NOTE 2, 3, 4 PERCENT OF RATED CURRENT DELAY 100% 135% 150% 200% 400% 600% 800% 1000% 1200% TRIP 10, 20 & 30 NO TRIP MAY TRIP .100 MAX. .100 MAX. .100 MAX. .100 MAX. .100 MAX. .100 MAX. .100 MAX. TIME 12, 22, 32 & 92 NO TRIP .300 - 7.00 .200 - 5.00 .100 - 2.00 .030 - .500 .008 - .300 .006 - .150 .005 - .100 .005 - .100 (SECONDS) 14, 24, 34 & 94 NO TRIP 3.00 - 70.0 2.00 - 40.0 1.00 - 15.0 .100 - 4.00 .008 - 2.00 .006 - .800 .005 - .350 .005 - .160 NOTES 1 Breakers to hold 100% and must trip at 150% of rated current and greater within the time limit shown in this curve. 2 Breakers to hold 100% and must trip at 135% of rated current and greater within the time limits shown in this curve. 3 Curve data shown represents breaker response at ambient temperature of 77°F (25°C) with no preloading. Breakers are mounted in standard wall mount position. 4 The minimum inrush pulse tolerance handling capacity on the above standard delays is 12 times rated current based on a 60 Hz, 1/2 cycle 8 ms pulse for delay curves 22, 24, 32 and 34 and is 18 times rated current up to 20 amps; 14 times rated current up to 25 amps based on a 60Hz, 1/2 cycle 8 ms pulse for delay curves 92 and 94. 10 Carlingswitch,Inc. (860) 793-9281 • Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 TRIP TIME IN SECONDS TRIP TIME IN SECONDS TRIP TIME IN SECONDS Q-Series Rocker Q-Series – Rocker Actuator The Q-Series magnetic circuit breakers are designed for those demanding applications where space, aesthetics and snap-in front panel mounting are important. Available in a choice of ® rocker actuator styles and colors including the Visi-Rocker two- color actuators as well as non-illuminated or illuminated versions ® with LED or neon bulbs. The exclusive Rockerguard bezel helps prevent inadvertent actuation. “Wiping” contact design insures long term reliability. Various styling options allow design flexibility. 1-2 poles, 0.02 to 25 amps, up to 250 VAC or 65 VDC. Available with a choice of time delays, terminals, actuator styles and colors. Agency Approvals UL Recognized under the Component Recognition Program as Protectors, Supplementary (Guide QVNU2, File E75596), UL Standard 1077 and Switches, Industrial Control (Guide NRNT2, File E148683), UL Standard 508. CSA Certified as Supplementary Protectors under Class 3215 01, File LR47848. CSA Standard C 22.2 No. 235. CSA UL General Specifications ELECTRICAL Table A: Lists UL Recognized and CSA Certified configurations and performance capabilities as a Component Supplementary Protector. AS A COMPONENT SUPPLEMENTARY PROTECTOR VOLTAGE CURRENT RATING INTERRUPTING INTERRUPTING CIRCUIT POLES CAPACITY (AMPS) CAPACITY (AMPS) FULL GENERAL MAX CONFIGURATION BREAKING w/o Backup Fuse w/Backup Fuse FREQUENCY PHASE LOAD PURPOSE RATING UL/CSA UL/CSA AMPS AMPS [1] [2] 0.02 - 15 15.1 - 25 1000 - 32 D.C. - 1 50 [3] D.C. - - 0.02 - 7.5 1 1000 - 65 D.C. - 0.02 - 15 15.1 - 25 2 1000 - SERIES 0.02 - 15 15.1 - 25 1000 - 125 50/60Hz 1 1 250 50/60Hz 1 0.02 - 12 - 1 1000 - 0.02 - 15 15.1 - 25 1000 - 250 50/60Hz 1 2 [4] [3] - 12.1 - 18 - 1000 250 50/60Hz 1 1 Table B: Lists UL Recognized and CSA Certified configurations and performance capabilities as an Industrial Control Switch. AS AN INDUSTRIAL CONTROL SWITCH VOLTAGE CURRENT RATING CIRCUIT POLES GENERAL FULL TUNGSTEN MAX CONFIGURATION BREAKING FREQUENCY PHASE PURPOSE LOAD LAMP LOAD RATING AMPS AMPS AMPS [1] [2] 15 25 32 D.C. - - 1 [3] 50 D.C. - - 7.5 - 1 15 25 65 D.C. - - 2 125 50/60Hz 1 15 25 15 1 SWITCH ONLY 12 - 250 50/60Hz 1 - 1 15 25 250 50/60Hz 1 - 2 NOTES 1 For Motor Load Applications. 2 For Non-Motor Load Applications. 3 Available under special catalog number only; consult factory. 4 Requires Branch Circuit backup with a UL Listed Type K-5 or RK-5 fuse rated 60 amps maximum. 28 Carlingswitch,Inc. (860) 793-9281 • Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 NEW Q-Series Rocker General Specifications (cont.) Maximum Voltage 125/250 VAC 50/60 Hz, 65 VDC (See Table A) Current Ratings Standard current coils: 0.100, 0.250, 0.500, 0.750, 1.00 thru 15.0 in 1 amp increments, 18.0, 20.0, 25.0. Other ratings available - consult factory. Auxiliary Switch Rating SPDT; 7 Amps - 250VAC, 7 Amps (Res)-28 VDC, 4 Amps (Ind.)-28 VDC (silver contacts), 0.1 Amps -125VAC (gold contacts). Insulation Resistance Minimum of 100 Megohms at 500 VDC. Dielectric Strength UL, CSA 1500V, 60 Hz for one minute between all electrically isolated terminals. Q-Series Non-Illuminated Circuit Breakers comply with the 8mm spacing and 3750 V 50/60Hz dielectric requirements from hazardous voltage to operator accessible surfaces, per IEC Publications 380/VDE 0806 and 435/VDE 0805. Resistance, Impedance Values from Line to Load Terminal - based on Series Trip Circuit Breaker 1000 CURRENT TOLERANCE (AMPS) (%) 0.10 - 20.0 ±25 100 20.1 - 25.0 ±35 10 O 1 H M S 0.1 0.01 0.001 0.01 0.1 1 10 100 AMPERE RATING 60 Hz 1/2 Cycle 50 Hz 1/2 Cycle Pulse Tolerance Curves I r Inrush Pulse Tolerance Inrush Pulse Tolerance I r Time Delay Curves Time Delay Curves 92 & 94 92 & 94 16x Time Delay Curves 18x 10x Time Delay Curves 32 & 34 32 & 34 12x t 10.0 20.0 5.0 t Time in 8.33 16.67 4.165 Milliseconds Time in Milliseconds MECHANICAL Endurance 10,000 ON-OFF operations @ 6 per minute with rated Current and Voltage. Trip Free All Q-Series Rocker Type Circuit Breakers will trip on overload, even when rocker is forcibly held in the ON position. Trip Indication The actuator moves positively to the OFF position when an overload causes the circuit breaker to trip. ENVIRONMENTAL Environmental Designed and tested in accordance with requirements of specification MIL-C- 55629 and MIL- STD-202 as follows: Shock Withstands 100 Gs, 6ms, sawtooth while carrying rated current per Method 213, Cond. I. Instantaneous curves tested at 80% of rated current. Vibration Withstands 0.060" excursion from 10-55 Hz, and 10 Gs 55-500 Hz, at rated current per Method 204C, Test Condition A. Instantaneous curves tested at 80% of rated current. Moisture Resistance Method 106D, i.e., ten 24-hour cycles @ + 25°C to +65°C, 80-98% RH. Salt Spray Method 101, Condition A (90-95% RH @ 5% NaCl Solution, 96 hrs). Thermal Shock Method 107D, Condition A (Five cycles @ -55°C to +25°C to +85°C to +25°C). Operating Temperature -40° C to +85° C Chemical Resistance Only the outside surfaces of the case and the rockers may be cleaned with detergents or alcohol. Organic (hydrocarbon based) solvents are not recommended because they attack plastics. Caution should be taken when solvents are used to clean and remove flux from terminals. Lubricants should not be introduced into the rocker/bezel openings. PHYSICAL Number of Poles 1 or 2 Internal Circuit Configurations Series with or without Auxiliary Switch and Rocker Illumination. Switch Only with or without Auxiliary Switch and Rocker Illumination. Weight Approximately 34 grams/pole (Approximately 1.2 ounces/pole) Standard Colors Housing-Black, White or Gray; Actuator- See Ordering Scheme. Carlingswitch,Inc. (860) 793-9281 • Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 29 Multiple of Rated Current Multiple of Rated Current Q-Series Rocker Circuit and Terminal Diagrams SERIES TRIP SERIES TRIP W/ TERMINAL DIMENSIONAL DETAIL ILLUMINATED ROCKER TAB(Q.C.) SCREW TERMINAL SCREW TERMINAL TERMINAL #8-32 WITH #8-32 UPTURNED LUGS BUS LOAD MAIN TERM'S. (SEE TABLE A) ±.5 ±12.7 LINE 7.00 [177.8] LONG RED(+), BLACK(-) LEADS SWITCH ONLY W/ SWITCH ONLY .250 [6.35] .375 [9.53] .375 [9.53] ILLUMINATED ROCKER .370 [9.40] .410 [10.41] .410 [10.41] .350 [8.89] AUXILIARY SWITCH TERMINALS .165 [4.19] .155 [3.94] SERIES TRIP W/ AUXILIARY SWITCH .060 DIA [Ş1.52] .058 DIA. [Ş1.47] NC DOUBLE ROUND NO SOLDER QUICK-CONNECT C TURRET TYPE TYPE AUX. SWITCH TERM'S. .350 [8.89] MULTI-POLE IDENTIFICATION SCHEME SEE TABLE A DEPTH BEHIND PANEL FACE VISI-OFF, SINGLE COLOR VISI-ON, & ILLUMINATED OPTIONS OPTION ONLY ONLY LOAD LINE NC C ±.030 ±.76 1.125 [28.58] NO NO C NC LINE LOAD .032 [.81] TYP. POLE 1 POLE 2 POLE 1 POLE 2 .253 [6.43] TYP FIG. A FIG. B TABLE - A DEPTH BEHIND TERMINAL DESCRIPTION PANEL FACE TAB (Q.C.) 1.750 / 44.45 MAIN SCREW (#8-32) 1.790 / 45.47 DOUBLE SOLDER TURRET TYPE 1.895 / 48.13 AUX.* SWITCH ROUND Q.C. TYPE 1.885 / 47.88 *AUX. SWITCH IS NOT AVAILABLE ON SINGLE POLE ILLUMINATED UNITS. WHEN CALLED FOR ON MULTI-POLE UNITS, ONLY ONE AUX SWITCH IS NORMALLY SUPPLIED, MOUNTED AS SHOWN IN FIG. A OR FIG. B. NOTES 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.015 [.38] unless otherwise specified. 30 Carlingswitch,Inc. (860) 793-9281 • Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 Q-Series Rocker Form and Fit Drawings INDICATE "ON" (VISI-ON) .520 [13.21] MAX. SINGLE POLE .250 [6.35] .920 [23.37] ±.020 ±.508 ±.020 ±.508 .680 [17.27] 1.382 [35.10] .550 [13.97] .253 [6.43] LINE ±.020 ±.508 1.630 [41.40] .970 [24.64] 2.000 [50.80] ±.030 ±.76 1.125 [28.58] LOAD 1.240 [31.50] ±.015 ±.38 .370 [9.40] .125 [3.18] SEE NOTE .400 [10.16] #4 ±.030 ±.76 TAB (Q.C.) TERMINALS SHOWN. FOR 1.750 [44.45] TERMINAL DETAILS SEE CIRCUIT AND TERMINAL DIAGRAMS. DOUBLE POLE .520 [13.21] MAX. .250 [6.35] 1.540 [39.12] ±.020 ±.508 ±.020 ±.508 1.304 [33.12] .550 [13.97] 1.382[35.10] .253 [6.43] LINE ±.030 ±.76 1.125 [28.58] 2.000 [50.80] .970 [24.64] ±.020 ±.508 1.630 [41.40] LOAD 1.240 [31.50] ±.015 ±.38 .370 [9.40] .125 [3.18] .400 [10.16] .625 [15.88] ±.020 ±.508 1.530 [38.86] ±.030 ±.76 1.750 [44.45] INDICATE "OFF" (VISI-OFF) SINGLE POLE DOUBLE POLE LOAD LOAD LINE LINE SINGLE COLOR ROCKERGUARD CONFIGURATION ANGLED ROCKER STYLE FLAT ROCKER STYLE DIMENSIONS ALSO APPLY TO DOUBLE POLE ±.030 ±.76 ±.030 ±.76 ±.020 ±.508 ±.020 ±.508 .510 [12.95] .305 [7.75] .510 [12.95] .675 [17.14] LOAD LOAD LOAD ±.020 ±.508 1.050 [26.67] LINE LINE LINE SEE NOTE #4 PANEL CUT-OUT DETAIL SINGLE POLE DOUBLE POLE PANEL DIM. A THICKNESS ±.005 [±.13] .062 [1.57] 1.775 [45.09] DIM A DIM. A .093 [2.36] 1.810 [45.97] .125 [3.18] 1.850 [46.99] +.010 +.26 +.010 +.26 -.000 -.00 -.000 -.00 .710 [18.03] 1.335 [33.91] NOTES 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.015 [.38] unless otherwise specified. Carlingswitch,Inc. (860) 793-9281 • Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 31 Q-Series Rocker Ordering Scheme PROD CODE POLES FREQUENCY & DELAY 8 Q 1 One 03 No Delay Applicable 2 Two DC, 50/60Hz “Switch Only” circuit option 30 DC, 50/60Hz Instant 32 DC, 50/60Hz Short 34 DC, 50/60Hz Medium 92 DC, 50/60 Hz Short High Inrush 94 DC, 50/60Hz Medium Figure G High Inrush ROCKER STYLE DESCRIPTION (DUAL LEGEND SHOWN) FLAT ANGLED INDICATE - "ON" INDICATE - "OFF" STYLE (CODE-D) (CODE-E) (CODES-B & G) (CODES-A & F) LINE VERTICAL LINE LINE LINE HORIZONTAL LINE LINE LINE LINE G Q 2 B 34 – – – 1 ACTUATOR CIRCUIT NON-ILLUMINATED ROCKER WITHOUT AUXILIARY SWITCH 8 SINGLE COLOR A Switch Only (No Coil)/Maintained Contacts A Angled B Series Trip (Current Coil) B Flat Circuit Aux. Switch Term. Type 2 VISI-ROCKER WITH AUXILIARY SWITCH - SILVER CONTACTS 8 D Indicate ON P Switch Only (Maintained Contacts) .060 Dia. Dbl. Solder Turret 8 9 E Indicate OFF Q Switch Only (Maintained Contacts) .058 Dia. Round Q.C. ILLUMINATED ROCKER S Series Trip (Current Coil) .060 Dia. Dbl. Solder Turret 9 F Angled T Series Trip (Current Coil) .058 Dia. Round Q.C. 2 G Flat WITH AUXILIARY SWITCH - GOLD CONTACTS 8 9 2 Switch Only (Maintained Contacts) .058 Dia. Round Q.C. 9 4 Series Trip (Current Coil) .058 Dia. Round Q.C. NOTES 1 Angled Rocker Style: Flat Rocker Style: Visi-Rocker Style: One rocker per unit is provided in center of bezel. Unless otherwise specified, all rocker styles have matte finish. 2. Auxiliary Switch is not available on single pole illuminated styles. 3. This is only a partial listing of the many amp ratings available. For other ratings, please consult factory. 4. For neon bulb applications at 120VAC, a 47K, 1/4 WATT, external resistor must be supplied by customer. For 250 VAC applications, a 150K 1/4 WATT, external resistor must be supplied by customer. 5. For LED (DC or rectified AC) applications the LED is supplied mounted in the center of the rocker actuator with electrical characteristics as follows: 100 millicandela at 20 mA; Maximum power dissipation = 75 mW at 25°C; Typical forward voltage = 2.1V at 20mA; Typical reverse current = 100 uA at 3V; Note: Customer is required to supply the proper external resistor limiting current to above values. 6. When visi-rocker is specified, the visi portion of the rocker can not be the same color as the bezel. The remainder of the rocker, however, will be the same color as the bezel. A legend is mandatory on all visi-rockers. 7. If legend not desired, choose Rocker Legend Type Code 1. 8. For “switch only” (no coil) version, select Current Coil Rating Code from table B on page 28. 9. Mates with AMP: .058 inch Dia. Pin Receptacles; P/N's 61983-1 (gold plated) and 61986-1 (tin plated). 10. Rocker color for LED’s and green neon lamp must be clear, smoke gray, white translucent, or match color of LED or lamp. 11. Dual = I-O / ON-OFF combination. 12. Consult factory for VDE Certified versions. 32 Carlingswitch,Inc. (860) 793-9281 • Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 Q-Series Rocker 6 ROCKER & LEGEND COLORS BEZEL COLOR/STYLE TERMINAL 10 ILLUMINATED ROCKER WITHOUT ROCKERGUARD 1 Push-On 7 ROCKER LEGEND A White 0.250 Tab (Q.C.) A Clear White B Black 2 Screw 8-32 B Red Transparent White G Gray w/upturned lugs C Green Transparent White WITH ROCKERGUARD 3 Screw 8-32 D Amber Transparent White 1 White (Bus Type) E Smoke Gray Transparent White 2 Black F White Translucent Black 7 Gray NON-ILLUMINATED ROCKER SINGLE COLOR 7 ROCKER LEGEND 1 White Black 2 Black White 3 Red White 8 Orange Black VISI-ROCKER 6 6 VISI & LEGEND ROCKER Remainder 1 White of rocker 2 Black same color 3 Red as bezel 4 Green 1 620 H C 6 7 C – – – – 11 12 CURRENT ROCKER LEGEND AGENCY APPROVAL ROCKER ILLUMINATION 3 COIL RATING 1 No legend A W/O Approval A NON-ILLUMINATED (amperes) (Single color or B UL Recognized (single color & Visi-Rocker 210 0.100 illuminated C UL Recognized; options only) 225 0.250 4 rocker options CSA Certified B Neon (w/o resistor) 250 0.500 only) 120VAC/250VAC 275 0.750 4,10 2 ON-OFF C Green Glow Neon 410 1.000 Vertical (w/o resistor) 420 2.000 3 ON-OFF 120VAC/250VAC 425 2.500 5,10 Horizontal 430 3.000 D Red LED (w/o resistor) 10 440 4.000 4 I-O E Red LED (w/ resistor) 450 5.000 Vertical 4-8 VDC 460 6.000 10 5 I-O F Red LED (w/ resistor) 470 7.000 Horizontal 9-16 VDC 475 7.500 5,10 6 Dual G Green LED (w/o resistor) 480 8.000 10 Vertical H Green LED (w/ resistor) 490 9.000 7 Dual 610 10.000 4-8 VDC 10 611 11.000 Horizontal J Green LED (w/ resistor) 612 12.000 9-16 VDC 613 13.000 5,10 K Amber LED (w/o resistor) 614 14.000 10 L Amber LED (w/ resistor) 615 15.000 4-8 VDC 618 18.000 10 M Amber LED (w/ resistor) 620 20.000 625 25.000 9-16 VDC Carlingswitch,Inc. (860) 793-9281 • Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 33 Q-Series Rocker Q-Series – Supplementary Drawings ONE POLE FIG-A FIG-B FIG-C ROCKER NON-ILLUMINATED NON-ILLUMINATED ALL-ROCKER AND (SINGLE COLOR AND VISI-OFF) (VISI-ON) OPTIONS ROCKER OPTIONS OPTION ONLY WITHOUT AUXILIARY AUXILIARY WITH AUXILIARY SWITCH WITH AUXILIARY SWITCH SWITCH SWITCH OPTIONS: LOAD LINE LINE LOAD (VISI-ON) (VISI-OFF) AND SINGLE COLOR C N O N C LINE LOAD LOAD LINE (VISI-ON) (VISI-OFF) AND SINGLE COLOR SERIES TRIP, SERIES TRIP, SERIES TRIP, AVAILABLE OR OR OR CIRCUIT OPTIONS: "SWITCH ONLY", "SWITCH ONLY", "SWITCH ONLY", TWO POLE FIG-D FIG-E FIG-F ILLUMINATED AND NON-ILLUMINATED NON-ILLUMINATED ALL-ROCKER OPTIONS ROCKER (SINGLE COLOR AND VISI-OFF) (VISI-ON) OPTION WITHOUT AND AUXILIARY ROCKER OPTIONS WITH ONLY WITH (1) AUXILIARY SWITCH (1) AUXILIARY SWITCH AUXILIARY SWITCH SWITCH OPTIONS: LOAD LINE LINE LOAD (VISI-ON) (VISI-OFF) AND SINGLE COLOR N C C N N O O N C C LINE LOAD LOAD LINE (VISI-ON) (VISI-OFF) AND SINGLE COLOR POLE 1 POLE 2 POLE 1 POLE 2 POLE 1 POLE 2 AVAILABLE SERIES TRIP, SERIES TRIP, SERIES TRIP, SERIES TRIP, SERIES TRIP, SERIES TRIP, CIRCUIT OR OR OR OR OR OR "SWITCH ONLY", "SWITCH ONLY", "SWITCH ONLY", "SWITCH ONLY", "SWITCH ONLY", "SWITCH ONLY", OPTIONS: MULTI-POLE BREAKERS ARE AVAILABLE WITH A MAXIMUM OF 1 AUXILIARY SWITCH MOUNTED AS SHOWN ABOVE FIG-G FIG-H ROCKER STYLE DESCRIPTION POLE DESIGNATIONS (DUAL LEGEND SHOWN) FOR HORIZONTAL MOUNTING / LEGEND ALL ROCKER STYLES INDICATE - "ON" INDICATE - "OFF" FLAT ANGLED STYLE (CODE-D) (CODE-E) (CODES - B & G) (CODES - A & F) LINE LOAD LINE (VISI-ON) (VISI-ON) VERTICAL POLE 2 LINE LINE LINE POLE 1 HORIZONTAL LOAD LINE (VISI-OFF AND (VISI-OFF AND SINGLE COLOR) SINGLE COLOR) LINE LINE LINE LINE 34 Carlingswitch,Inc. (860) 793-9281 • Carlingswitch, LTD. Int + 44 1392-364422 • Carlingswitch Asia-Pacific, LTD. Int + 852-2737-2277 C N O N C