CARLING TECHNOLOGIES TILB60-2L-BL-B

Tippette Tippette FULL SIZED ROCKER SWITCHES The Tippette Series is a traditionally styled rocker switch, available in sealed or unsealed versions. These switches are appropriate for use in general purpose applications which may or may not require a modicum of environmental protection. The Tippette Series is available in both illuminated and non-illuminated versions and features a wide variety of circuits, actuator styles and bracket options. This versatile offering includes international agency certifications and ratings to 26 amps for select circuits. Product Highlights: Typical Applications: Š Š Ratings Up to 26 Amps 250 VAC General Purpose Applications Š Š Illuminated or Non-Illuminated Commercial Food Equipment Š Š Multiple Termination, Mounting and Recreational Vehicles Rocker Options Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: sales@carlingtech.com www.carlingtech.com Application Support: team2@carlingtech.com Phone: 860.793.9281 Fax: 860.793.9231 | 2 Tippette Actuator Styles & Special Circuits - General Specifications Electrical Physical Contact Rating 15 amps, 125 VAC Lighted Incandescent - rated 10,000 hours 10 amps, 250 VAC Neon - rated 25,000 hours 3/4 HP 125-250 VAC Seals Bracket - Actuator WBL/MBL 15 amps, 12-30 VDC optional external gasket panel seal Life 25,000 cycles circuit dependent Base Phenolic (150°C) 50,000 cycles circuit dependent Rocker/Bracket Nylon 66 (105°C) consult factory for applicable circuits. Contacts Fine silver, silver cad-oxide Mechanical Terminals Brass or copper/silver plate Endurance 100,000 cycles minimum 1/4” (6.3mm) Quick Connect terminations standard. Solder lug - Brass Tin Plated Wire Lead 16 gauge standard 105°C Mounting 600VAC 1.190 [30.22] Screw Terminals - Brass .680 [17.27] MOUNTING HOLE (Nylon Snap-in Brackets) .830 [21.08] Agency Certifications Panel Thickness: .040 min. - .250 max. 55˚ - 4 places 1.450 [36.83] Select circuits and constructions with VDE/IEC approvals are available. Consult factory *Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. *Manufacturer reserves the right to change product specification without prior notice. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com TIG/TIH/TII & LTIL/LTIG-Series Rocker & Paddle Switches - Ordering Schemes | 3 TIGA51 6M BL MBL 1 2 3 4 Base Part Number Actuator Style Actuator Color Bracket 8,11 7 10 9 1 BASE PART NUMBER: SERIES/POLES / CIRCUITRY / RATING / TERMINATION 3 ACTUATOR COLOR 10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 6-28VDC BL Black WH White RD Red 2 Single Pole in Double Pole base Double Pole solder .250 screw wire solder .250 screw wire 9 lug tab term. leads lug tab term. leads 4 BRACKET STYLE 5 TIGA50 TIGA51 TIGA54 TIGA55 On-None-Off TIGK50 TIGK51 TIGK54 TIGK55 A Screw Mount 5,12 TIGA5A TIGA5B TIGA5E TIGA5F (On)-None-Off TIGK5A TIGK5B TIGK5E TIGK5F B Screw Mount 5 TIGA5L TIGA5M TIGA5S TIGA5T On-None-(Off) TIGK5L TIGK5M TIGK5S TIGK5T C Screw Mount 5 TIGB50 TIGB51 TIGB54 TIGB55 On-None-On TIGL50 TIGL51 TIGL54 TIGL55 H Screw Mount TIGB5A TIGB5B TIGB5E TIGB5F On-None-(On) TIGL5A TIGL5B TIGL5E TIGL5F NBL Nylon Black 4 TIGC50 TIGC51 TIGC54 TIGC55 On-Off-On TIGM50 TIGM51 TIGM54 TIGM55 WBL Water shedding Black 4,6 TIGC5A TIGC5B TIGC5E TIGC5F On-Off-(On) TIGM5A TIGM5B TIGM5E TIGM5F MBL Marine Style Black 5 TIGC5L TIGC5M TIGC5S TIGC5T (On)-Off-(On) TIGM5L TIGM5M TIGM5S TIGM5T FN Metal Snap-In 5 Three Pole Four Pole FN BLK Black Metal Snap-In 5 solder .250 screw wire solder .250 screw wire FN SS Stainless Steel Snap-In 5 lug tab term. leads lug tab term. leads FW Wide Stainless Steel Snap-In TIHK50 TIHK51 TIHK54 TIHK55 On-None-Off TIIK50 TIIK51 TIIK54 TIIK55 TIHK5A TIHK5B TIHK5E TIHK5F (On)-None-Off TIIK5A TIIK5B TIIK5E TIIK5F Notes: TIHK5L TIHK5M TIHK5S TIHK5T On-None-(Off) TIIK5L TIIK5M TIIK5S TIIK5T 1 NBL, FN, & FW brackets only. TIHL50 TIHL51 TIHL54 TIHL55 On-None-On TIIL50 TIIL51 TIIL54 TIIL55 2 For single pole switch in a single pole base, specify TIL TIHL5A TIHL5B TIHL5E TIHL5F On-None-(On) TIIL5A TIIL5B TIIL5E TIIL5F with single pole circuitry/rating/termination. TIHM50 TIHM51 TIHM54 TIHM55 On-Off-On TIIM50 TIIM51 TIIM54 TIIM55 3 NBL, WBL, & MBL brackets only. With 6M actuator, TIHM5A TIHM5B TIHM5E TIHM5F On-Off-(On) TIIM5A TIIM5B TIIM5E TIIM5F brackets also will be matte finish. TIHM5L TIHM5M TIHM5S TIHM5T (On)-Off-(On) TIIM5L TIIM5M TIIM5S TIIM5T 4 6M & 6S actuators only VDE APPROVED 5 Not available with 6M & 6S actuators. 10A 250VAC, 15A 125VAC, 12(6)A 250VAC T85 6 Consists of WBL bracket, neoprene seal, and dummy 2 rivets at open holes. Consult factory for agency approval Single Pole in Double Pole base Double Pole status. solder .250 wire solder .250 wire 7 All ratings are appropriate for usage in low voltage lug tab lead lug tab lead applications. TIGA90 TIGA91 TIGA95 On-None-Off TIGK90 TIGK91 TIGK95 8 For additional special circuits, see catalog. TIGB90 TIGB91 TIGB95 On-None-On TIGL90 TIGL91 TIGL95 9 Custom colors are available, consult factory. TIGC90 TIGC91 TIGC95 On-Off-On TIGM90 TIGM91 TIGM95 10 .187 tab and PC terminations are also available. Consult factory for catalog number callout. Additional ratings up to 20A 125-277VAC, 1 1/2HP 125 VAC, 2HP 250VAC are available. 11 ( ) momentary Consult factory for specifics. 12 Not available with WBL or MBL style brackets. 13 Available with bracket A, C or H only. 14 Not available with MBL, WBL or H brackets. Can be supplied as a double rocker to control separate poles of 2 ACTUATOR STYLE a TIG,TIH or TII switch. Consult factory for details. 12 3 1S Angular/Smooth Face Gloss 6M Curved/Smooth Face Matte 12 3 1C Angular/Cross Serrations Gloss 6S Curved/Smooth Face Gloss 12 1 1F Flatted/Smooth Face Gloss 7S Rounded Paddle/Smooth Face Gloss 1,12 14 1L Angular/Longline Serrations Gloss 7N Witch’s Hat/Narrow 14 14 2L Long Smooth/Narrow 7P Witch’s Hat/Wide LTILA51 6M BL RC MBL 12V 2 3 4 5 6 1 Actuator Style Actuator Color Lens Color Bracket Lamp Voltage Base Part Number 4 12 10 2 ACTUATOR STYLE 1 BASE PART NUMBER: SERIES / POLES / ILLUMINATION / CIRCUITRY / RATING / 1 14 1S Angular/Smooth Face Gloss TERMINATION 1 1C Angular/Cross Serrations Gloss 10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 15-28VDC 1 1L Angular/Longline Serrations Gloss illuminated Single Pole in Double Pole base illuminated Double Pole 3 6M Curved/Smooth Face Matte solder .250 screw wire solder .250 screw wire 3 6S Curved/Smooth Face Gloss lug tab term. leads lug tab term leads 2 7S Rounded Paddle/Smooth Face Gloss LTILA50 LTILA51 LTILA54 LTILA55 On-None-Off LTIGK50 LTIGK51 LTIGK54 LTIGK55 LTILA5A LTILA5B LTILA5E LTILA5F (On)-None-Off LTIGK5A LTIGK5B LTIGK5E LTIGK5F LTILA5L LTILA5M LTILA5S LTILA5T On-None-(Off) LTIGK5L LTIGK5M LTIGK5S LTIGK5T 11 3 ACTUATOR COLOR LTILB50 LTILB51 LTILB54 LTILB55 On-None-On LTIGL50 LTIGL51 LTIGL54 LTIGL55 BL Black WH White RD Red LTILB5A LTILB5B LTILB5E LTILB5F On-None-(On) LTIGL5A LTIGL5B LTIGL5E LTIGL5F LTILC50 LTILC51 LTILC54 LTILC55 On-Off-On LTIGM50 LTIGM51 LTIGM54 LTIGM55 LTILC5A LTILC5B LTILC5E LTILC5F On-Off-(On) LTIGM5A LTIGM5B LTIGM5E LTIGM5F 13 4 LENS COLOR LTILC5L LTILC5M LTILC5S LTILC5T (On)-Off-(On) LTIGM5L LTIGM5M LTIGM5S LTIGM5T 7 AM Amber RC Red GN Green Additional ratings up to 12A 250VAC, 17A 125 VAC, 3/4 HP 125 VAC, 1HP 250VAC are available. 7 LU Blue CL Clear WH White Consult factory for specifics. Three pole switch is also available: Substitute H for fourth digit of part number. ex. LTIHK51 11 5 BRACKET STYLE Notes: NBL Nylon Black 1 NBL, FN, & FW brackets only. Double pole circuits provided with 3 pole base. 5 WBL Water shedding Black 2 LTIL-Series with NBL, FN, & FW brackets only. 5,8 MBL Marine Style Black 3 NBL, WBL, & MBL brackets only. With 6M actuator, bracket will also be matte finish. 4,6 FN Metal Snap-In 4 1S, 1C, 1L & 7S with NBL bracket only available with LTIL-Series. 4,6 FN BLK Black Metal Snap-In 5 6M, 6S actuators only. 4,6 FN SS Stainless Steel Snap-In 6 Not available with 6M and 6S actuators. 7 Not recommended with neon lamps. 8 Consists of WBL bracket, neoprene seal, dummy rivets at open holes. Consult factory for agency approval status. 9 Not recommended with blue or green lenses. 6 LAMP VOLTAGE 9 10 All ratings are appropriate for usage in low voltage applications. neon 11 Custom colors and additional bracket styles are available, consult factory. 125N 125 volt 250N 250 volt 12 ( ) - momentary incandescent 13 All double throw circuits supplied with two lenses. To specify two different lens colors, specify second color, after first color. 6V 6 volt 12V 12 volt 18V 18 volt (ex. LTIGM51-6S-BL-RC/GN-WBL-12V) 24V 24 volt 28V 28 volt 14 .187 tab and PC terminations are also available. Consult factory for catalog number callout. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com | 4 Tippette Actuator Styles & Special Circuits - Dimensional Specifications .075[1.91] DIA .055[1.40] DIA .650[16.51] .125[3.18] DIA .394[10.00] .437[11.09] .330[8.38] 1.069[27.15] .372[9.45] .187[4.74] .187[4.74] .250[6.35] .392[9.95] SOLDER LUG .250 TAB (Q.C.) .187 TAB (Q.C.) TERMINAL TYPE .820[20.82] #6-32NC-2 .187[4.75] 6.000[152.40] THREAD .141[3.58] .370[9.39] .187[4.75] .500[12.70] 1.069[27.15] .286[7.26] .350[8.89] SCREW PRINTED 1.190[30.22] WIRE LEAD .680[17.27] (ASSEMBLED) CIRCUIT MOUNTING HOLE .490[22.86] .075[1.905] (Nylon Snap-in Brackets) * Angled corners are .830[21.08] Panel Thickness: IEC APPROVED CONSTRUCTION suggested for optimum fit. .030 min. - .250 max. (TIG ONLY) Standard rectangular Switch should be mounted at 90˚ cutout is acceptable. 55˚ for maximum water shedding 4 plcs* 1.450[36.83] (45˚ to 90˚ acceptable) .650[16.51] .650[16.51] .650[16.51] 1.224[31.08] .957[24.30] 1.224[31.08] .957[24.30] 1.224[31.08] .957[24.30] 1L 1C 1S TIL,TIG,TIH,TII TIL,TIG,TIH,TII TIL,TIG,TIH,TII .312[7.92] .650[16.51] .957[24.30] 1.224[31.08] 1.224[31.08] .957[24.30] 1.024[26.00] .300[7.62] 6S 1.224[31.08] 1F 2L TIG TIG, TII TIL,TIG,TIH,TII .630[16.00] .430[10.90] .650[16.51] .250[6.35] 1.035[26.28] .996[25.30] 1.224[31.08] .880[22.40] .880[22.4] 7S 7N 7P TIG TIG TIG SPECIAL CIRCUITS FOR TIPPETTE ROCKER SWITCHES Circuit Position 1 Position 2 Position 3 Progressive Two Circuit GG BOTH CIRCUITS ON ONE CIRCUIT ON OFF GG BOTH CIRCUITS (ON) ONE CIRCUIT ON OFF Single Pole Triple Throw GE ON ON ON Two Circuit GH CIRCUIT 1 ON BOTH CIRCUITS ON CIRCUIT 2 ON GP CIRCUIT 2 ON CIRCUIT 1 ON OFF Reversing Double Pole Double Throw GO ON OFF ON GX ON NONE ON ( ) Indicates momentary function. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Tippette Mounting Bracket Styles - Dimensional Specifications | 5 Dimensional Specifications: in. [mm] 1.190[30.22] # 6-32NC-2 TAP .680[17.27] .156[3.96] DIA .156[3.96] DIA .070[1.77] .830[21.08] 55˚ 4 plcs* .158[4.01] DIA 1.450[36.83] TAPPED HOLE CLEARANCE HOLE MOUNTING HOLE Standard with Standard with (Nylon Snap-in Brackets) A & B Brackets C Bracket Panel Thickness: .030 min. - .250 max. * Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. TIL TIG TII TIH 1.940[49.27] 1.940[49.27] 1.892[48.06] 1.960[49.78] .078[1.98] .078[1.98] .078[1.98] .078[1.98] 1.625[41.27] 1.625[41.27] 1.625[41.27] 1.625[41.27] A A A A TIG TII TIL TIH 2.093[53.16] 2.090[53.08] .156[3.96] .156[3.96] 1.625[41.27] 1.625[41.27] B B TIL TII, TIG 1.875[47.62] 1.940[49.27] 2.062[52.37] .426[10.82] .426[10.82] .437[11.09] 1.625[41.27] 1.625[41.27] 1.625[41.27] CX C C TIL TIG TIH, TII 1.950[49.53] 1.700[43.18] GCP GMP 1.350[34.29] GLOSS FINISH MATTE FINISH .960[24.38] HOLE PLUG FOR TIL, TIG, TIH & TII 1.625[41.27] 1.570[39.88] .430[10.92] H TIG NARROW WIDE MARINE / STD / WATERSHEDDING 1.750[44.45] 1.570[39.87] 1.700[43.18] 1.126[28.60] .900[22.86] .960[24.38] FN FW MBL, NBL, WBL TIG TIL, TIG, TIH, TII TIL, TIG, TIH, TII BLACK NYLON, SNAP-IN METAL, SNAP-IN METAL, SNAP-IN Email: sales@carlingtech.com Application Support: team2@carlingtech.com Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com | 6 Notes Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com | Sales Representatives, Distributors & Company Profile 7 Authorized Sales Representatives and Distributors Click on a region of the map below to find your local representatives and distributors or visit www.carlingtech.com/findarep. CANADA EUROPE USA MIDDLE EAST MEXICO AFRICA ASIA-PACIFIC OCEANIA SOUTH AMERICA About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: sales@carlingtech.com Application Support: team2@carlingtech.com Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 @ Email: sales carlingtech.com @ Northern Region Sales Office: nrsm carlingtech.com @ Southeast Region Sales Office: sersm carlingtech.com @ Midwest Region Sales Office: mrsm carlingtech.com @ West Region Sales Office: wrsm carlingtech.com @ Latin America Sales Office: larsm carlingtech.com Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Suite 1607, 16/F Tower 2, The Gateway, Harbour City, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 @ Email: sales carlingtech.com.hk @ Shenzhen, China: shenzhen carlingtech.com @ Shanghai, China: shanghai carlingtech.com @ Pune, India: india carlingtech.com @ Kaohsiung, Taiwan: taiwan carlingtech.com @ Yokohama, Japan: japan carlingtech.com | | Europe Middle East Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 @ Email: ltd.sales carlingtech.com @ Germany: gmbh carlingtech.com @ France: sas carlingtech.com www.carlingtech.com REV_11_2016