V-Series Contura Sealed Rocker Switches - Stand-Alone Components Reduce inventory levels and cost by stocking actuators and base switches separately. Contura II, III, IV, V, VI, VII, X, XI, XII, XIV Base switches separately: specify V with code selections 2-8 in the ordering schemes. Contura II, III, IV, V Actuator only: VV with code A or C for selection 9, & with selections 10-14 in the ordering schemes. Contura VI Actuator with lenses and inserts only: VV with code selections 9-16 Contura II, III, IV, V, VII Actuator only: VV with code A, C, E, G, P or Z for selection 9 & with selections 10-14 in the ordering schemes. Contura X, XI, XII, XIV actuators with lenses separately: VV with code selections 9-14 in the ordering schemes. Panel Seal: VPS Contura X & XI actuators without lenses separately: Contura XII actuators without lenses separately: VVR 6 1 00 1 VVP J 1 Z 21 1 00 1 2 3 4 5 1 2 3 4 5 6 7 Actuator Lens Legend Actuator Separately Actuator Lens Legend Actuator Style & Lens Legend Legend Style/Color Opening Legend Orientation Color Opening Opening Orientation 1 CONTURA X & XI ACTUATOR SEPARATELY 1 CONTURA XII ACTUATOR SEPARATELY VVR VVP 2 ACTUATOR STYLE & COLOR 2 ACTUATOR STYLE & COLOR Black Gray White Red J Black K Gray N White M Red Contura X 1 2 3 4 Contura XI 6 7 8 9 3,4 LENS OPENING FOR Z No lens 1 Bar lens 2 Square lens 1 3 LENS OPENING FOR 1 One bar lens 5 square lens on top/ 2 One bar lenses bar lens on bottom 2 5, 7 LENS OR BODY LEGEND 3 One square lens (Contura X only) 00 - No Legend 21 22 23 24 4 two square lens OFF ON O I 25 O 26 O 27 O 28 I 4 ACTUATOR LENS OR BODY LEGEND F N 00 - No Legend this location F 11 ON 12 OFF 13 I 14 O For additional legend options & codes, visit us at www.carlingtech.com. OFF ON O I 15 O O 16 O O 17 O I 18 I O ORIENTATION OF F N N F 3 ACTUATOR/LENS IN PANEL 6 LEGEND ORIENTATION ORIENTATION 1 F F 0 No legend For additional legend options & codes, visit us at www.carlingtech.com. 1 Orientation 1 ORIENTATION 2 2 Orientation 2 ORIENTATION OF ACTUATOR/LENS IN PANEL 1 5 LEGEND ORIENTATION ORIENTATION 1 0 No legend 1 Orientation 1 Contura X, XI & XII actuator lens assembly separately: 2 Orientation 2 3 Orientation 3 ORIENTATION 4 ORIENTATION 2 4 Orientation 4 VVL 2 1 00 0 1 2 3 4 5 Lens Separately Lens Lens Legend Legend ORIENTATION 3 Style Color Orientation 1 CONTURA X, XI & XII LENS SEPARATELY VVL Contura X, XI & XII top piece of 2-piece lens separately: 3 2 LENS STYLE 1 TOP OF LENS SEPARATELY 1 Bar lens VVT VVT 1 2 One Piece Square lens 5 3 Bottom of Two-Piece Square lens 1 2 2 COLOR Lens Separately Color 1 Clear 2 Smoke 3 White 3 TRANSLUCENT LENS COLOR 4 4 1 Clear 2 White 3 Amber 4 Green 5 Red 6 Blue Contura X, XI & XII actuator lens assembly: 2 4 LENS OR BODY LEGEND 00 - No Legend 21 22 23 24 actuator stem top lens two piece OFF ON O I } lens assembly posts mount toward actuator stem bottom lens 25 O 26 O 27 O 28 I 1 piece lens/bar lens are positioned the same as bottom lens for assembly, F N minus the top lens. Lenses snap in from bottom. F For additional legend options & codes, visit us at www.carlingtech.com. Notes: 1 If actuator lens opening for 2 bar or 2 square lenses, legend orientation 0,1, or 2 ORIENTATION OF must be chosen. ACTUATOR/LENS IN PANEL 3 5 LEGEND ORIENTATION ORIENTATION 1 2 Center of actuator marking not available for Contura XII. 0 No legend 3 Legend is not available for bar style lens. 1 Orientation 1 4 Not recommended with neon lamps. 2 Orientation 2 5 Must also order top piece of 2 piece square lens separately. 3 Orientation 3 ORIENTATION 4 ORIENTATION 2 4 Orientation 4 ORIENTATION 3 www.carlingtech.com V-Series Contura Sealed Rocker Switches - Accessories Easily integrate Contura products into your system, with Contura Accessories Q.C. SELECTION GUIDE WIRE PART NO Contura Connectors RANGE COMPANY ORIEN- TIN SERIES PLAIN 2 TATION Q.C. SELECTION GUIDE AWG MM PLATED BRASS (REF) BRASS WIRE PART NO RANGE 02965580 12 3.0 COMPANY ORIEN- TIN 02965471 12010601 (2)16-14 (2)1.0-2.0 SERIES PLAIN 2 TATION Q.C. SELECTION GUIDE Q.C. SELECTION GUIDE Q.C. SELECTION GUIDE AWG MM PACKARD PLATED BRASS 02965470 16-14 1.0-2.0 B 58 SERIES (REF) BRASS WIRE WIRE WIRE PART NO PART NO PART NO 02965469 06288318 RANGE 20-18 RANGE .5-.8 RANGE 02965580 12 3.0 COMPANY COMPANY COMPANY ORIEN- ORIEN- ORIEN- TIN TIN TIN 12084590 102 5.0 2 2 SERIES SERIES PLAIN SERIES PLAIN PLAIN TATION TATION TATION 02965471 12010601 (2)16-14 (2)1.0-2.0 AWG MM AWG MM AWG MM PLATED PLATED PLATED BRASS BRASS BRASS TANG PACKARD 12052224 (REF) 12 (REF) 3.0 (REF) BRASS BRASS BRASS 02965470 16-14 1.0-2.0 B 58 SERIES 02965580 02965580 1202965580 3.012 3.012 3.0 12015870 16-14 1.0-2.0 02965469 06288318 20-18 .5-.8 PACKARD 02965471 12010601 02965471 (2)16-14 12010601 02965471 (2)1.0-2.0 (2)16-14 12010601 (2)1.0-2.0 (2)16-14 (2)1.0-2.0 METRI-PACK 12020035 (2)22-18 (2).5-.8 A PACKARD PACKARD PACKARD 12084590 10 5.0 Q.C. SELECTION GUIDE 02965470 02965470 16-14 02965470 1.0-2.0 16-14 B 1.0-2.0 16-14 B 1.0-2.0 B 630 SERIES 58 SERIES 58 SERIES 58 SERIES TANG 12015832 12015869 20-18 .5-.8 12052224 12 3.0 02965469 06288318 02965469 20-18 06288318 02965469 .5-.8 WIRE 20-18 06288318 .5-.8 20-18 .5-.8 PART NO RANGE 12052222 20-22 .35-.5 12015870 16-14 1.0-2.0 12084590 12084590 10 5.012084590 10 5.010 5.0 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT PACKARD COMPANY ORIEN- TANG TANG TANG TIN 12052224 12052224 12 3.012052224 12 3.012 3.0 METRI-PACK SERIES PLAIN12020035 (2)22-1816-12 (2).5-.8 2 T 1.3-3 ATION A AWG MM Q.C. SELECTION GUIDE PLATED SYMBOL 60253-1 60253-2 BRASS 630 SERIES AMP 12015870 16-14 12015870 1.0-2.0 16-14 12015870 1.0-2.0 16-14 1.0-2.0 (REF) PACKARD PACKARD PACKARD BRASS 12015832 12015869 20-18 (2) 16 .5-.8 (2) 1.3 WIRE 250 SERIES METRI-PACK METRI-PACK 12020035 METRI-PACK (2)22-18 12020035 (2).5-.8 (2)22-18 12020035 A (2).5-.8 (2)22-18 A (2).5-.8 A 02965580 PART NO 12 3.0 B RANGE F 630 SERIES ASTIN-FASTON 630 SERIES 42100-1 630 SERIES 12052222 42100-2 20-22 18-14 .35-.5 .8-2 12015832 12015869 12015832 20-18 12015869 12015832 .5-.8 20-18 12015869 .5-.8 20-18 .5-.8 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT COMPANY 02965471 12010601 (2)16-14 (2)1.0-2.0 ORIEN- TIN PACKARD SERIES PLAIN 16-12 1.3-3 2 TATION 60295-1 02965470 12052222 60295-2 20-22 12052222 16-14.35-.5 22-18 20-22 12052222 1.0-2.0 .35-.5 20-22 .3-.9 B .35-.5 AWG MM PLATED SYMBOL 58 SERIES 60253-1 60253-2 TANG SYMBOL =TANG SYMBO SHOWS ORIEN L =TANG SYMBO TA SHOWS ORIEN TION OF L = TANG IN SLOT TA SHOWS ORIEN TION OF TANG IN SLOT TATION OF TANG IN SLOT BRASS AMP (REF) 02965469 06288318 BRASS 16-12 20-181.3-3 16-12.5-.8 1.3-3 16-12 1.3-3 (2) 16 (2) 1.3 SYMBOL SYMBOL SYMBOL 250 SERIES 60253-1 60253-2 60253-1 60253-2 60253-1 60253-2 NOTE: AMP Consult Delphi Packard and/or AMP AMP Amp on actual part numbers and availability. B 02965580 12084590 (2) 16 12 10(2) 1.3 (2) 16 3.0 5.0 (2) 1.3 (2) 16 (2) 1.3 FASTIN-FASTON 42100-1 42100-2 18-14 .8-2 250 SERIES 250 SERIES 250 SERIES AMP is a registered trademark of AMP Inc. Harrisburg, PA B B B TANG 02965471 12010601 12052224 (2)16-14 12 (2)1.0-2.0 3.0 FASTIN-FASTONFASTIN- 42100-1 FASTON FASTIN- 42100-2 42100-1 FASTON 18-14 42100-2 42100-1 .8-2 18-14 42100-2 .8-2 18-14 .8-2 Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems PACKARD Warren, Ohio 60295-1 60295-2 22-18 .3-.9 02965470 12015870 16-14 16-14 1.0-2.0 1.0-2.0 B 58 SERIES PACKARD 60295-1 60295-2 60295-1 22-18 60295-2 60295-1 .3-.9 22-18 60295-2 .3-.9 22-18 .3-.9 METRI-PACK 02965469 06288318 12020035 (2)22-18 20-18 (2).5-.8 .5-.8 A NOTE: Consult Delphi Packard and/or Amp on actual part numbers and availability. .820[20.83] NOTE: Consult Delphi Packard and/or 630 SERIES NOTE: Consult Delphi Packard and/or NOTE: Amp on actual part numbers and availabilit Consult Delphi Packard and/or Amp on actual part numbers and availabilit Amp on actual part numbers and availabilit y. y. y. 12015832 12084590 12015869 20-18 10 .5-.8 5.0 .820[20.83] AMP is a registered trademark of AMP Inc. Harrisburg, PA AMP is a registered trademark of AMP is a registered trademark of AM AM P Inc. Harrisburg, P is a registered trademark of AMP P Inc. Harrisburg, A AMP PA Inc. Harrisburg, PA TANG 12052224 12052222 20-22 12 .35-.5 3.0 Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Warren, Ohio Warren, Ohio Warren, Ohio TANG SYMBOL = Warren, Ohio SHOWS ORIENTATION OF TANG IN SLOT 12015870 16-14 16-12 1.0-2.0 1.3-3 PACKARD SYMBOL 60253-1 60253-2 AMP .820[20.83] .820[20.83] .820[20.83] METRI-PACK 12020035 (2)22-18 (2) 16 (2) 1.3 (2).5-.8 A .820[20.83] .820[20.83] .820[20.83] .820[20.83] 250 SERIES B 630 SERIES .820[20.83] FASTIN-FASTON 12015832 42100-1 12015869 42100-2 20-18 18-14 .8-2 .5-.8 .770[19.56] 60295-1 12052222 60295-2 20-22 22-18 .35-.5 .3-.9 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT 16-12 1.3-3 NOTE: Consult Delphi Packard and/or Amp on actual part numbers and availability. SYMBOL 60253-1 60253-2 .770[19.56] .770[19.56] .770[19.56] AMP AMP is a registered trademark of AMP Inc. Harrisburg, (2) 16 PA (2) 1.3 250 SERIES B Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Warren, Ohio .770[19.56] FASTIN-FASTON 42100-1 42100-2 18-14 .8-2 .920[23.37] .920[23.37] 1.170[29.72] 60295-1 60295-2 22-18 .3-.9 .820[20.83] .820[20.83] .920[23.37] .920[23.37] .920[23.37] .920[23.37] .920[23.37] .920[23.37] 1.170[29.72] 1.170[29.72] 1.170[29.72] NOTE: Consult Delphi Packard and/or Amp on actual part numbers and availability. A A A A AMP is a registered trademark of AMP Inc. Harrisburg, PA PACKARD 630 PACKARD 630 VC2 A PACKARD 630 .920[23.37] A A PACKARD 630 A A A .920[23.37] A A A A 1.170[29.72] A A Delphi Packard is a registered trademark of Delphi-Packard Electrical Systems Warren, Ohio VC1 VC1 VC2 PACKARD 630 PACKARD 630 PACKARD 630 PACKARD 630 PACKARD 630 PACKARD 630 PACKARD 630 PACKARD 630 PACKARD 630 PACKARD 630 PACKARD 630 PACKARD 630 VC2 VC2 VC2 VC1 VC1 VC1 VC1 VC1 VC1 VC2 VC2 VC2 .950[24.13] B B .770[19.56] .950[24.13] .950[24.13] .950[24.13] B B B B B B .820[20.83] .820[20.83] B B A AMP, PACKARD 58 AMP, PACKARD 58 A AMP AMP A A AMP, PACKARD 58 AMP, PACKARD 58 AMP, PACKARD 58 AMP, PACKARD 58 AMP, PACKARD 58 AMP AMP, PACKARD 58 AMP AMP AMP AMP B AMP B B B B B AMP, PACKARD 58 AMP, PACKARD 58 AMP, PACKARD 58 AMP, PACKARD 58 PACKARD 630 AMP AM , PACKARD 58 P, PACKARD 58 AMP, PACKARD 58 PACKARD 630 AMP, PACKARD 58 VC2 PACKARD 630 10 1 30 2 3 128 1 1 0 3 8 2 1784P1 ACKARD 630 053 6 7 2 9 41784 5 56 9 6 9 107 3 4 2 51 6 89 1010 3 3 2 128 1 710 48 3 5 2 61 9 8 7 4 5 67 9 4 7 45 56 9 6 9 VC1 VC1 VC23 2 1 8 3 2 1 8 7 34 23 5 16 2 8 1 8 7 4 5 6 7 4 5 6 7 4 5 6 B .920[23.37] B .920[23.37] 1.170[29.72] .950[24.13] 1.266[32.16] 1.266[32.16] 1.466[37.24] 1.266[32.16] 1.466[37.24] 1.266[32.16] 1.466[37.24] 1.266[32.16] 1.466[37.24] 1.266[32.16] 1.466[37.24] 1.466[37.24] 1.250[31.75] 1.250[31.75] 1.250[31.75] B B AMP, PACKARD 58 1.266[32.16] AMP, PACKARD 58 1.466[37.24] AMP 1.266[32.16] AMP 1.466[37.24] .770[19.56] 1.250[31.75] AMP, PACKARD 58 AMP, PACKARD 58 A A A A 10 3 2 1 8 7 4 5 6 9 10 3 2 1 8 7 4 5 6 9 VC2 PACKARD 630 PACKARD 630 PACKARD 630 PACKARD 630 3 2 1 8 7 4 5 6 MARKING DETAIL MARKING DETMARKING DE AIL MARKING DE TAIL T MARKING DE AIL TAIL MARKING DE MARKING DE TAIL TAILMARKING DETAIL MARKING DE MARKING DET TAIL AIL MARKING DETAIL MARKING DE MARKING DE TAILTAIL MARKING DETAIL MARKING DE MARKING DE TAIL TAILMARKING DETAIL MARKING DETAIL VC1 VC1 VC2 FRONT VIEW FRONT VIEW REAR VIEW FRONT VIEW REAR VIEW FRON REAR VIEW T VIEW FRONT VIEW REAR VIEW FRONT VIEW REAR VIEW FRON REAR VIEW T VIEW FRONT VIEW REAR VIEW FRONT VIEW REAR VIEW REAR VIEW B B .950[24.13] MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL 1.266[32.16] AMP, PACKARD 58 1.466[37.24] AMP, PACKARD 58 AMP 1.266[32.16] AMP 1.466[37.24] B B 1.250[31.75] FRONT VIEW .920[23.37] REAR VIEW .920[23.37] FRONT VIEW REAR VIEW 1.170[29.72] FRONT VIEW REAR VIEW AMP, PACKARD 58 AMP, PACKARD 58 10 3 2 1 8 7 4 5 6 9 10 3 2 1 8 7 4 5 6 9 VC1 VC1 VC1 VC2 VC2 VC2 3 VCH 2 1 8 VCH 7 4 5 VCH 6 CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING A A A A MARKING DETAIL 1.266[32.16] MARKING DE 1.466[37.24] TAIL 1.266[32.16] MARKING DETAIL 1.466[37.24] MARKING DETAIL 1.250[31.75] MARKING DETAIL MARKING DETAIL VC1 (For AMP terminals only) (For AMP terminals only) VC2 (For AMP terminals only) PACKARD 630 PACKARD 630 VCH PACKARD 630 PACKARD 630 VC2 FRONT VIEW VC1 REAR VIEW VC1 FRONT VIEW VC2 REAR VIEW FRONT VIEW REAR VIEW B B CONNECTOR HOUSING .950[24.13] CONNECTOR HOUSING CONNECTOR HOUSING MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL AMP, PACKARD 58 AMP, PACKARD 58 AMP AMP B B (For AMP terminals only) FRONT VIEW REAR VIEW FRONT VIEW REAR VIEW FRONT VIEW REAR VIEW AMP, PACKARD 58 AMP, PACKARD 58 10 3 2 1 8 7 4 5 6 9 10 3 2 1 8 7 4 5 6 9 VC1 VC2 3 2 1 8 VCH 7 4 5 6 VC1 CONNEC VC2TOR HOUSING VCH CONNECTOR HOUSING CONNECTOR HOUSING 1.266[32.16] 1.466[37.24] 1.266[32.16] 1.466[37.24] 1.250[31.75] CONNECTOR HOUSING CONNEC (For AM TOR HOUSING P terminals only) CONNECTOR HOUSING (For AMP terminals only) MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL FRONT VIEW REAR VIEW FRONT VIEW REAR VIEW FRONT VIEW REAR VIEW 1.050[26.67] 1.050[26.67] 1.050[26.67] Contura X Boot (P/N VB1-01) Additional V-Series Ratings VC1 VC2 VCH CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING 1 .4VA @ 28VDC Resistive (For AMP terminals only) VB1-01 VB1-01 VB1-01 4 10A 250VAC 1/2 HP, 15A 125 VAC 1/2 HP, No Agency Listings 2.000[50.80] 2.000[50.80] 2.000[50.80] 1.050[26.67] CONTURA X BOOT CONTURA X BOOT CONTURA X BOOT 1 1.050[26.67] 5 2 1.050[26.67] 6 15A 125VAC 1/2 HP, 12(2)A 125 VAC μ T85 2 7 15A 125VAC 1/2 HP, 12(6)A 125 VAC T85 VB1-01 VB1-01 2.000[50.80] CONTURA X BOOT 2 2.000[50.80] .757[19.23] .757[19.23] .757[19.23] 8 10A 250VAC, 15 CONTUR A 125 A X BOOT VAC, 1/2 HP 125-250VAC, 12(2)A 250 VAC μ T85 1.050[26.67] 2 VB1-01 9 10A 250VAC, 15A 125VAC, 1/2 HP 125-250VAC, 12(6)A 250 VAC T85 2.000[50.80] CONTURA X BOOT B 15A 24V VB1-01 2.000[50.80] CONTURA X BOOT .757[19.23] C 20A 18V D 20A 12V .757[19.23] E 20A 14V, 10A 14VT (circuits 1, 4, A, & D only) 3.99 [101.35] 3.99 [101.35] 3.99 [101.35] .757[19.23] F 10A 14V, 6A, 14VT (circuit G only) .757[19.23] G 20A 6V VRT VRT VRT ACTUATOR REMO ACTU VALA TOR REMO ACTU VAL ATOR REMOVAL INSERT POINTS UNDER INSERT POINTS UNDER INSERT POINTS UNDER H 20A 3V Contura II, III, IV & V Actuator ACTU 3.99 [101.35] ATOR ACTUATOR .900 [22.86] ACTUATOR .900 [22.86] T.900 [22.86] OOL TOOL TOOL HOLD FLUSH ON BRACKET AND PUSH HOLD FLUSH ON BRACKET AND PUSH HOLD FLUSH ON BRACKET AND PUSH IN IN IN (For flush bracket) L 15 (For flush bracket) A 125 VAC, 10 (For flush bracket) A 250VAC, 1/2 HP 125-250 VAC; 6A 125 VAC L TOP TOP TOP VRT Removal Tool (P/N VRT) M .4VA/20A 12V (combi-contact) ACTUATOR REMOVAL INSERT POINTS UNDER ACTUATOR .900 [22.86] TOOL (combination gold/silver contacts for borderline dry circuit applications) HOLD FLUSH ON BRACKET AND PUSH IN (For flush bracket) 3.99 [101.35] TOP 3.99 [101.35] N .4VA/15A 24V (combi-contact) 3.99 [101.35] VRT(combination gold/silver contacts for borderline dry circuit applications) ACTUATOR REMOVAL INSERT POINTS UNDER VRT ACTUATOR .900 [22.86] TOOL HOLD FLUSH ON BRACKET AND PUSH IN (For flush bracket) ACTUATOR REMOVAL INSERT POINTS UNDER VRT TOP NOTES ACTUATOR .900 [22.86] TOOL ACTUATOR REMOVAL INSERT POINTS UNDER HOLD FLUSH ON BRACKET AND PUSH IN Consult factory to determine availability for individual circuits and their HP (For flush bracket) rating. ACTUATOR .900 [22.86] TOOL HOLD FLUSH ON BRACKET AND PUSH TOP IN (For flush bracket) 1. Not avaiable with Contura 7 or 14 rocker styles. TOP 2. pole circuits, & are not available with illumination circuits 4, 8, D, J, N, & T or with wire lead or solder lug terminations. Circuits 1, 4, A, D, H, M & E are not available with rating 6 & 8. Rating 7 & 9 only available with circuits 1, 4, A & D. Circuits 2, 3, 5, 7, 8, K, L are 1/2 HP 250VAC only with rating 8. Ratings 6 & 7 must specify lamp code 1 (125VAC neon). Ratings 8 & 9 must specify lamp code 2 (250VAC neon). Rating L available with circuits 1, 4, A & D only. www.carlingtech.com TOP TOP TOP TOP TOP TOP TOP V-Series Contura Sealed Rocker Switches - Accessories Contura Mounting Panels Dimensional Specifications: in. [mm] Contura Hole Plug Dimensional Specifications: in. [mm] 1.450 [36.83] TEST CUT VHP HOLE IN .830 [21.08] ACTUAL CONTURA II,III HOLE PLUG MATERIAL 1.240 [31.50] 1.820 [46.23] VHP .430 [10.92] CONTURA II,III HOLE PLUG VH2 STANDARD HOLE PLUG (With wing serrations) VH1 STANDARD HOLE PLUG (No wing serrations) 2.000 [50.80] (With VC1 connector attached) 1.067 [27.10] DETAIL VIEW VH3 VH4 VH1,VH3 & VH5 CONTURA IV HOLE PLUG CONTURA IV HOLE PLUG HOLE PLUGS (No wing serrations) (With wing serrations) (No wing serrations 1.928 [48.97] for ease of removal) 1.020 [25.91] DETAIL VIEW VH2,VH4 & VH6 VH5 VH6 HOLE PLUGS CONTURA V HOLE PLUG CONTURA V HOLE PLUG (With wing serrations) (No wing serrations) (With wing serrations) www.carlingtech.com