V16 CFM201S SERIES 200 WATT AC-DC OPEN FRAME WITH PFC Features * Universal Input Range 90 ~ 264Vac * Active PFC Meets EN61000-3-2 * Conductive EMI Meets CISPR/FCC Class B * High Efficiency up to 92% * Remote Voltage Sense * Over Temperature Protection RIPPLE & VOLTAGE LINE VOLTAGE Load % EFF. OUTPUT CURRENT OUTPUT MODEL NOISE ACCURACY REGLUATION ADJ. REGULATION (Typ.) VOLTAGE RATED1 RATED2 NOTE1 NOTE2 NOTE3 RANGE NOTE4 NOTE5 Main Output Voltage CFM201S120 +12 V 16.67A 12.5 A 120 mV ± 1% ± 0.5% 11.4~12.6 ± 1% 89% CFM201S240 +24 V 8.34A 6.25 A 150 mV ± 1% ± 0.5% 22.8~25.2 ± 1% 90% CFM201S360 +36 V 5.56A 4.17 A 150 mV ± 1% ± 0.5% 34.2~37.8 ± 1% 91% CFM201S480 +48 V 4.17A 3.13 A 150 mV ± 1% ± 0.5% 45.6~50.4 ± 1% 92% Fan Output Voltage All +12V 0.5 A 120 mV ± 3% ± 1% -- ± 5% -- 1. RATED1: Forced air convection 2. RATED2: Natural convection Specifications are subject to change without notice. 1 V16 Specifications CFM201S Series Derating Curve INPUT SPECIFICATIONS: AC Input Voltage …....………........….......................................... 90~264Vac Input current …………………………… 100Vac/3A max., 240Vac/1.5A max. Frequency ………………………………………….……………..... 47 to 63Hz Inrush Current …………… Cold Start@25℃ ........... 100A max. @240Vac EMI …………………………………………………..…… CISPR/FCC Class B Leakage Current …………………………………………….…..… 3.5mA max. OUTPUT SPECIFICATIONS: Isolation ……….....................……… Input to Output = 3000VAC(4,242VDC) Hold-up Time …………………………………………...… 10ms typ@115Vac Over Voltage Protection ………………...…… Hiccup mode(Auto Recovery) Short Circuit Protection ………………..…….. Hiccup mode(Auto Recovery) ％ ℃ Temperature Coefficient …………………………………………… ±0.05 / GENERAL SPECIFICATIONS: Operating Temperature ................................. -20~80℃ (see derating curve) Storage Temperature .................................................................... -20~85℃ Over Temperature Protection ………….………………….…. Auto Recovery Humidity ……………….……………….… 93% RH max. non-condensing Altitude ………..……………………………………………..………..... 2000m Cooling ………............................… Natural convection for 150W and forced air convection(19CFM FAN) for 200W NOTE: Switching Frequency ………………………........................ 80~100KHz typ. 1. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for MTBF ……… MIL-HDBK-217F, GB, 25℃/115VAC ……….… 120Khrs typ. ripple &noise measuring @20MHz BW. Dimensions 2. Voltage accuracy is set at 60% rated load and 25℃.Ta. Open frame versions …… 5.000x3.000x1.441 inches (127.00x76.20x36.60mm) 3. Line regulation is measured from high line to low line with rated load. Covered versions ……...... 5.354x3.465x1.929 inches (136.00x88.00x49.00mm) 4. Load regulation is measured from full to 10% load. Weight ………………… Open frame versions 400g, Covered versions 500g 5. Typical efficiency at 230 VAC and full load at 25°C. 6. Standard input and output connectors (CN1 and CN2) wafer with SAFETY AND EMC: Emission and lmmunity …........ EN55022 Class B, FCC Part15 Class B TAIWAN KING PIN TERMINAL PVHI series and mate with JST EN61000-6-3, EN61000-3-2, EN61000-3-3 housing VHR series or equivalent. EN55024, EN61000-6-1, EN61204-3 7. Optional Input and output connectors (CN1 and CN2) wafer with Safety ……….………….. IEC60950-1, EN60950-1, UL60950-1 2nd edition LONG CHU P3060 series and mate with MOLEX housing 5195 series or equivalent. 8. Output connector CN3(Remote voltage sense) mates with MOLEX housing 5051 or equivalent. 9. Output connector CN4(Fan output) mates with MOLEX housing 5051 or equivalent. 10. For covered versions add “C” to model number or order part no. For example CFM201S120 –C, safety approvals do not the covered assembly, only to the open-frame power supply. 2 V16 Mechanical Specification Typical at 25˚C, nominal line and 75% load, unless otherwise Specified. 3