CHE100W-24S3V3 - CINCON - Electronics Finder

Description

100 W, 9 -36 VDC Vin, Single Output, 3.3 VDC@25 A DC-DC Converter

Part Number

CHE100W-24S3V3

Price

Request Quote

Manufacturer

CINCON

Lead Time

Request Quote

Category

Capacitors » DC-DC Converter

Specifications

Manufacturer

Cincon

Manufacturers Part #

CHE100W-24S3V3

Industry Aliases

CHE100W-24S3V3

Series

CHE100W

Factory Pack Quantity

Cooling Method

Convection

Dimensions

2.28 x 2.40 x 0.50"

Efficiency

87%

Input Voltage Nominal

24 VDC

Isolation

1500 VDC

Mechanical Style

Isolated

Mounting

Through Hole

Number of Outputs

Operating Temperature

- 40 to + 105°C

Output Amps 1

25 A

Output Voltage V1 Nominal

3.3 VDC

Power

100 W

Subcategory

DC-DC Converter

Datasheet

SPEC-CHE100W-V12.pdf

205 KiB

Download

Extracted Text

V12 CHE100/CHE100W SERIES 100 WATT 2:1/4:1 INPUT ︳ DC-DC CONVERTERS SINGLE OUTPUT FEATURES * 100W Isolated Output * Half-Brick Size, Six-Sided Shield Metal Case * High Efficiency to 93% * 2:1/4:1 Input Range * Regulated Outputs * 250KHz Switching Frequency * Continuous Short Circuit Protection * Input Under Voltage Protection * Over Temperature/Voltage/Current Protection * Remote On/Off ℃ * Full Load Operation up to 60 with Heat-sink M-C091 Natural Convention * No Tantalum Capacitor Inside * CE Mark Meets 2004/108/EC * Safety Meets UL60950-1, EN60950-1 and IEC60950-1 CHE100 Series OUTPUT MODEL INPUT OUTPUT INPUT CURRENT CAPACITOR CURRENT % EFF. NUMBER VOLTAGE VOLTAGE LOAD MAX. MIN. MAX. NO LOAD FULL LOAD 0 mA 8.4 A 200 mA CHE100-24S12 18-36 VDC 12 VDC 92 4.57 A 8400μF (2) 18-36 VDC 24 VDC 0 mA 4.2 A 100 mA 4.57 A 92 CHE100-24S24 4200uF CHE100W Series OUTPUT INPUT CURRENT % EFF. MODEL INPUT OUTPUT CAPACITOR CURRENT NUMBER VOLTAGE VOLTAGE LOAD MAX. MIN. MAX. NO LOAD FULL LOAD (4) (3) CHE100W-24S3V3 9-36 VDC 3.3 VDC 0 mA 25 A 200 mA 85.5 87 3.94 A 25000μF 9-36 VDC 5 VDC 0 mA 20 A 150 mA 88.5 89.5 CHE100W-24S05 4.66 A 20000μF CHE100W-24S12 9-36 VDC 12 VDC 90 90.5 0 mA 8.4 A 200 mA 4.62 A 8400μF 9-36 VDC 15 VDC 0 mA 6.7 A 200 mA 89.5 90.5 CHE100W-24S15 4.62 A 6700μF (2) 9-36 VDC 24 VDC 0 mA 4.2 A 100 mA 88.5 89 CHE100W-24S24 4.76 A 4200uF (2) CHE100W-24S48 9-36 VDC 48 VDC 0 mA 2.1 A 100 mA 4.76 A 89.5 88.5 2100μF 18-75 VDC 3.3 VDC 0 mA 25 A 130 mA 1.96 A 87.5 88 CHE100W-48S3V3 25000μF 18-75 VDC 5 VDC 20 A 2.28 A 91.5 92 CHE100W-48S05 0 mA 130 mA 20000μF 18-75 VDC 12 VDC 0 mA 8.4 A 100 mA 2.26 A 92.5 93 CHE100W-48S12 8400μF 18-75 VDC 15 VDC 0 mA 6.7 A 100 mA 2.26 A 91.5 92.5 CHE100W-48S15 6700μF (2) 18-75 VDC 24 VDC 0 mA 4.2 A 100 mA 2.32 A 91 91 CHE100W-48S24 4200uF (2) 18-75 VDC 48 VDC 0 mA 2.1 A 100 mA 2.32 A 91.5 90.5 CHE100W-48S48 2100μF NOTE: 1. Nominal Input Voltage 24, 48 VDC 2. Require a 10uF Aluminum Capacitor Connected Between +Vout and –Vout for 24 & 48Vout Models. 3. Measured at Nominal Input Voltage. 4. Measured at 12VDC for 24SXX, 24VDC for 48SXX. 1 V12 SPECIFICATIONS ℃ All Specifications Typical At Nominal Line, Full Load, and 25 Unless Otherwise Noted INPUT SPECIFICATIONS: GENRAL SPECIFICATIONS: Input Voltage Range ....……………..........….......... 24V ................. 9-36V Efficiency .................…..................................……..........…....... See Table 48V ………… 18-75V Isolation Voltage ............... Input/Output .....…….…..….. 1500VDC min. CHE100-24SXX ……….… 18-36V Input/Case, Output/Case …... 1500VDC min. 7 Input Surge Voltage (100ms max.) ……..……….... 24V ........ 50Vdc max. Isolation Resistance .............................…....................…….... 10 ohm min. 48V ..… 100Vdc max. Isolation Capacitance …………………..………………………… 1000pF typ. Switching Frequency ................................................................ 250KHz typ. Under voltage lockout ………..….. 24Vin power up ….…..…..…..…. 8.8V 24Vin power down …………..…. 8.0V Operating Case Temperature ..……….........….......…........... -40℃ to 105℃ CHE100-24SXX/48Vin power up ………..……….. 17V Storage Temperature ……….……….......…....……............ -55℃ to +105℃ CHE100-24SXX/48Vin power down ……..……… 16V Thermal Shutdown Case Temperature …..……………….…. 110℃ typ. Positive Logic Remote ON/OFF (see note4&5) Humidity .................................................... 95% RH max. Non condensing Input Filter ………………………………………………..…….…... Pi Type MTBF …… MIL-STD-217F, GB, 25℃, Full Load ……. XXS05: 750Khrs typ. Others: 880Khrs typ. OUTPUT SPECIFICATIONS: Voltage Accuracy ........................................………….......... ±1.5% max. Dimensions ......................... 2.28×2.40x0.50 inches (57.9x61.0×12.7 mm) Transient Response: 25% Step Load Change .………………...… <500μs Case Material ...........................…… Aluminum with Non-Conducted Base Weight …………………………………………………………………..….. 95g External Trim Adj. Range …………………………………………… ±10% Ripple & Noise, 20MHz BW NOTE: 3.3V & 5V ..………... 40mV RMS, 100mV pk-pk max. 1. Measured from high line to low line. 12V & 15V ..……...... 60mV RMS, 120mV pk-pk max. 2. Measured from full load to zero load. 24V .………………. 100mV RMS, 240mV pk-pk max. 3. Output ripple and noise measured with 10uF tantalum and 1uF ceramic 48V .………………. 200mV RMS, 480mV pk-pk max. capacitor across output. Temperature Coefficient ....................……......................…..... ±0.03%/°C (24V&48V: 10uF aluminum and 1uF ceramic capacitor across output.) Short Circuit Protection .........………………......................... Continuous 4. Logic compatibility ……………... open collector refer to -Vin Line Regulation (note1) ……………….………..................…. ±0.2% max. Module on ………………….. >3.5VDC to 75VDC or open circuit Module off …………….………………………..….. 0 to < 1.2VDC Load Regulation (note2) ………………………….........…...... ±0.2% max. Over Voltage Protection Trip Range, % Vo nom. .................. 115-140% 5. Suffix "N" to the model number with negative logic remote on/off Current Limit .................……………….... 110%-140% Nominal Output Module on ………………..……….………….……. 0 to < 1.2VDC Start up time …………………………………………………….. 10mS typ. Module off ………………….. >3.5VDC to 75VDC or open circuit Typical Derating Curve 120% -40 60 100% 80% 60% 40% with heatsink M-C091 CASE HB All Dimensions In Inches(mm) 20% Tolerances Inches: X.XX= ±0.02 , X.XXX= ±0.010 105 Millimeters: X.X= ±0.5 , X.XX=±0.25 0.10 min 0% [2.5] Mounting Inserts 0.50 -40 -20 0 20 40 60 80 100 120 [12.7] M3*0.5 Through 4pl. BOTTOM VIEW o Ambient Temperature( C) Pin Function 1 +V Input 4 5 2 On/Off 3 CASE 3 6 4 -V Input 7 5 -V Output 2 8 6 -Sense 7 Trim 1 9 +Sense 8 +VOutput 9 0.48 1.90 [12.3] [48.3] 2.28 [57.9] REMOTE ON/OFF CONTROL EXTERNAL OUTPUT TRIM +SENSE (8) +SENSE (8) ON/OFF (2) TRIM DOWN 10K ohms TRIM (7) TRIM (7) HIGH SIGNAL HERE TRIMPOT DISABLE OUTPUT TRIM UP -VIN (4) -SENSE (6) -SENSE (6) 2 2.40 [61.0] 2.00 [50.8] 1.400 [35.56] 0.600 [15.24] [1.02] [2.03] LO AD(%)

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products