CINCON MLD4-C140

V11 MLD SERIES MULTI-CHANNEL BUCK DC LED DRIVER with DALI Features * Wide Input Range * LED Driver Current up to 1400mA * Compatible to the DALI Standard * Provides Multi-cannel of LED Lighting Synchronization Controls * Constant Current Dimming Control (PWM mode) * Option Auxiliary power Input Output Output Ripple & Efficiency Output Rated Voltage MODEL Operating Rated Noise (max.) (TYPICAL) Power/Channel Range Voltage Current Note2 Note3 500 mVpp 95% 4.5-60 Vdc 2-57 VDC x4 700 mA x4 40 W MLD4-C070 500 mVpp 95% 4.5-60 Vdc 2-57 VDC x4 1000 mA x4 57 W MLD4-C100 500 mVpp 95% 10-36 Vdc 8-33 VDC x4 1400 mA x4 46.2 W MLD4-C140 500 mVpp 95% 4.5-60 Vdc 2-57 VDC x6 700 mA x6 40 W MLD6-C070 500 mVpp 95% 4.5-60 Vdc 2-57 VDC x6 1000 mA x6 57 W MLD6-C100 500 mVpp 95% 10-36 Vdc 8-33 VDC x6 1400 mA x6 46.2 W MLD6-C140 Note: 1. Nominal Input Voltage: 48Vdc, 28Vdc( C140 models) 2. Ripple & Noise are measured at rated current, Nominal Input and 36Vdc or 24Vdc (C140 models) output and 20MHz bandwidth with a 0.1uF ceramic capacitor. 3. Measured at rated current, Nominal Input and 36Vdc or 24Vdc(C140 models) output. 4. Acceptable customer modifications. Example Circuit Connection of MLD4 module for driving 4 LED Luminaries 1 V11 Specifications MLD4/6 Derating Curve All specifications are Typical at nominal line , full load and 25˚C unless otherwise noted INPUT SPECIFICATIONS: 120 Input Voltage …....………....…........................................... see table 100 Input Surge Voltage (1second) …… 1.4A/Others .….. 50V/65Vdc max. Input Filter …………………………………………….…………. Capacitor 80 Under Voltage Lockout .. Power up ... 1.4A/Others ... 8.0Vdc/4.0Vdc typ. 60 Power down …. 1.4A/Others ….. 6.9Vdc/3.7Vdc typ. 40 1.4A 0 .7A /1A OUTPUT SPECIFICATIONS: Constant Current Accuracy …. (note1) ….…….……………… ±5% max. 20 Current Line Regulation …….. (note2) .………….……..………. ±5% max. 0 Current Load Regulation ….... (note3) …………..……..………. ±5% max. -40 -2 0 0 2 0 4 0 6 0 8 0 1 00 Auxiliary power ..…….….. (40Vdc>Vin>21Vdc) ….…..…. 18Vdc/300mA Short Circuit Protection ………….. Constant Current with Auto Recovery Ambient Temperature(℃) Start up time ……………….…… 1.4A/Others …....... 400ms/10ms max. GENERAL SPECIFICATIONS: DALI Control: Efficiency …………………………………………………………. See Table Output Current Range ………………………………..……….. 10%-100% ℃ Temperature Coefficient ……...............…................……..…… ±0.05%/ SAFETY AND EMISSIONS: Isolation voltage ………………………………………………. Non-isolation EMI Meet …………………………..........………............ EN55015 Class B Switching Frequency ……… 1.4A/Others .…….. 50-500KHz/300KHz typ. EMS Meet ……….................................... EN61547,EN61000-4-2,3,4,6,8 Operating Ambient Temperature ............. -40 ~ 71℃ see De-rating Curve NOTE: 1. 3V < Vin-Vout < 30Vdc. to keep current accuracy. Cooling ……………………………………………..……. Natural Convection 2. Current line regulation is measured from high line to low line. Storage Temperature……...……………..………………........... -55 ~ 105 3. Current load regulation is measured from high to low operating voltage. Operating Humidity ……….………....……. 10%~95%RH non-condensing Operating Altitude …………….………………………. Sea Level to 3000m 4. Suffix “A” to the model number with Aux. power for MLD4 only. Vibration …….… 0~500Hz, 2G 60min./1cycle, period for 3hours, 3 axes Shock …………………………….….………… 30g peak, half sine, 6 axes 5℃) MTBF, MIL-HDBK-217F (2 ……….……………….……..……..…. TBD Dimensions …………....... 5.05x2.30x0.80 Inches(128.3x58.4x20.3 mm) Weight …………………………… MLD4/MLD6 ………….……….145/160g Case Material ………………………………..…………….. Aluminum Case Mechanical Specification Load( %)