CINCON TRG45A120-12E12

V15 TRG45 SERIES 45W SWITCHING ADAPTER ︳ Features * Universal Input Range 90~264VAC * Meets EN55022 Class “B” and CISPR/FCC Class B * Continuous Short Circuit Protection * Over Voltage Protection * Meet CEC & ErP Level V ≦ (Output Cable Length 1800mm) ： (TRG45A120 Output Cable Length≦720mm 16AWG) Ordering information TRG45AXXX- XX X XX Model No. DC Plug Type OVP DC Cable Length and Type E: With OVP 01: 720mm 02: 1220mm 03: 1800mm 11: 720mm with Ferrite Core 12:1220mm with Ferrite Core 13:1800mm with Ferrite Core *18AWG/UL1185 RIPPLE & VOLTAGE LINE LOAD % EFF. OUTPUT OUTPUT (Typ.) MODEL NOISE ACCURACY REGULATION REGULATION VOLTAGE CURRENT NOTE 5 NOTE 2 NOTE 1 NOTE 3 NOTE 4 TRG45A120 12V 3.75A 120mVp-p ±2% ±1% ±3% 85% TRG45A150 15V 3.00A 150mVp-p ±2% ±1% ±3% 86% TRG45A180 18V 2.50A 180mVp-p ±2% ±1% ±2% 86% TRG45A190 19V 2.37A 190mVp-p ±2% ±1% ±2% 86% TRG45A240 24V 1.88A 240mVp-p ±2% ±1% ±2% 88% TRG45A480 48V 1.00A 480mVp-p ±2% ±1% ±2% 88% Specifications are subject to change without notice. 1 V15 Specifications TRG45 Series Derating Curve INPUT SPECIFICATIONS: 100% Voltage …....………........….............................................. 90~264Vac 80% Frequency ………………………………………….……………..... 47 to 63Hz 60% Inrush Current ……………….. Cold Start @25℃ 70A max. @240Vac 20LFM(Natural Convection) Conducted EMI ……………………………………..…… CISPR/FCC Class B 40% Leakage Current ………………………………………..…….…… 3.5mA max. 20% OUTPUT SPECIFICATIONS: 0% Holdup Time ……………………………………………… 8ms typ. @115Vac 0 10 20 30 40 50 60 Short Circuit Protection …………………………….…………… Continuous o Ambient Temperature( C) Over Voltage Protection …………………………………………………… Yes ℃ Temperature Coefficient ……………………............................… ±0.05%/ GENERAL SPECIFICATIONS: NOTE: Isolation …………………………………………… Input to output = 4,242VDC 1.Voltage accuracy at 60% full load. 2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for Operating Temperature .............................. 0 ~ 60℃ (see derating curve) Storage Temperature …………………………...….......……........ -20 ~ 85℃ Ripple & Noise measurement @20MHz BW. Humidity …………………...….......……........ 93% RH max. Non condensing 3. Line regulation measured from 100Vac to 240Vac, full load. Cooling ……………………………………………………. Natural Convection 4. Load regulation measured from 60% to 100% full load and from Switching Frequency ………………………………………… 100KHz Typical 60% to 20% full load (60% +/- 40% full load). 5. Typical efficiency at 230VAC and full load at 25℃. MTBF ……… MIL-HDBK-217F, GB, at 25℃/115VAC ………. 200K hrs min. Altitude …………………………………………………………………… 2000m 6. ”Various TR Series adapters are PSE certified. PSE certification Dimensions ….…….. 4.724x2.047x1.220 inches (120.00x52.00x31.00mm) alone is not sufficient for importation into Japan. A valid PSE mark Weight …………………………………………………… 280g (0.62 Pounds) must contain the name of the importer as shown in the example below. AC Inlet …………………………………………………………….. IEC320/C14 If PSE mark is required, the name of the registered importer must be supplied to Cincon on order placement. Product labels will not contain SAFETY AND EMC: Emission and lmmunity ………… EN55022 Class B, FCC Part 15 Class B PSE mark if importer name is not supplied. Consult factory or local EN61000-6-3, EN61000-3-2, EN61000-3-3 represen tative for details”. EN55024, EN61204-3, EN61000-6-1 Safety ………………………………… IEC60950-1, EN60950-1, UL60950-1 Mechanical Specification All Dimensions are in inches(mm) Tolerance:Inches:X.XXX±0.02 Millimeters:X.XX±0.5 DC Plug type: V+ ─●)─ V- DC Plug :Right Angle(ψ5.5／ψ2.1) L12mm 18AWG／1800mm Typical at 25˚C, nominal line and 75% load, unless otherwise Specified 2 Rated Load(%)