Type 150 Axial Leaded Metallized Polyester
Flame Retardant Wrap and Fill Axial Leaded Capacitors
The Type 150 series axial lead metallized polyester
non inductive capacitors are available in bulk or on
tape and reel for automatic insertion. Type 150 is a
general purpose capacitor for use in blocking, bypass,
decoupling, smoothing and some timing applica-
tions.
Highlights
• Available on tape and reel or bulk
• Epoxy end fill meets UL94V-0
• Non inductively wound
• Flame retardant outer wrap meets UL510
• Non polar
RoHS Compliant
Specifications
Capacitance Range:
0.001 µF to 10.0 µF
Voltage Range:
63 to 1000 Vdc
Capacitance Tolerance:
±5%, ±10%, ±20%
Operating Tempeature Range:
–55 ºC to +125 ºC (derate linearly to 50% rated voltage
at 125 ºC)
Dielectric Withstand Voltage: 1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC
–4
Dissipation Factor (DF): tgd x 10 at +25 ºC ±5 ºC
kHz C ≤0.1 µF 0.1 µF 1 µF
1 80 80 100
10 150 150 —
100 250 — —
Insulation Resistance:
10,000 MΩ x µF, 30,000 MΩ Min.
Self Inductance:
1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test:
95% RH @ +45 ºC for 21 days
Soldering:
260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability:
ΔC/C ≤ ±3% after 2 years
Maximum Pulse Rise Time dv/dt and Pulse:
L Max
V/n
Characteristic (Wo):
16.5 19 - 20.5 26.5 - 5.28 31.5 - 33
4 2 1.5 1
50 - 63
504 252 189 126
5 3 2 1
100
1,000 600 400 300
dV/dt (V/µsec)
10 7 4 2.5
2
W (V /µsec)
250
O
5,000 3,500 2,000 1,250
13.5 10 6.5 4
400
10,800 8,000 5,200 3,200
20 15 10 6
630
25,200 18,900 12,600 7,500
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 150 Axial Leaded Metallized Polyester
Outline Drawing
Tape and Reel Specifications
L Max Distance Between
Lead Spacing
(Body Lengty) Reel Flanges Class
Inches mm Inches mm Inches mm
≤.433 ≤11 2.06 52.4 3 75 1
.551 - .808 14 - 20.5 2.5 63.6 3.4 86 2
Ød ±.003
≥1.03 ≥26 2.87 73 3.7 95 3
±0.076 mm
Tinned Copper Leads
^Add class number (1, 2, or 3) to catalog number to indicate tape and reel
Diameter
Quantity per Reel
1.58” ±0.2
Inches mm 1.58” ±0.2
L Max.
(40 ±5 mm) D
(40 ±5 mm)
0.197 5 3,000
Max.
.236 thru .256 6.0 trhu 6.5 1,200
0.276 7 1,100
.315 thru .346 8 thru 8.5 800
.354 thru .413 9 thru 10.5 500
.433 thru .512 11 thru 13 300
.551 thru .571 14 thru 14.5 200
>.571 >14.5 Not available
Ratings
Catalog Cap Inches Max Millimeters Max Catalog Cap Inches Max Millimeters Max
Part Number (µF) D L Ød D L Ød Part Number (µF) D L Ød D L Ød
63 Vdc 150274*100CB^ 0.270 0.256 0.650 0.024 6.5 16.5 0.6
150154*63AA^ 0.150 0.197 0.433 0.024 5.0 11.0 0.6 150334*100EB^ 0.330 0.315 0.650 0.031 8.0 16.5 0.8
150154*63BB^ 0.150 0.236 0.650 0.024 6.0 16.5 0.6 150394*100EB^ 0.390 0.315 0.650 0.031 8.0 16.5 0.8
150184*63AA^ 0.180 0.197 0.433 0.024 5.0 11.0 0.6 150474*100DC^ 0.470 0.276 0.807 0.031 7.0 20.5 0.8
150184*63BB^ 0.180 0.236 0.650 0.024 6.0 16.5 0.6 150564*100EC^ 0.560 0.315 0.807 0.031 8.0 20.5 0.8
150224*63BB^ 0.220 0.236 0.650 0.024 6.0 16.5 0.6 150684*100FC^ 0.680 0.335 0.807 0.031 8.5 20.5 0.8
150274*63BB^ 0.270 0.236 0.650 0.024 6.0 16.5 0.6 150824*100HC^ 0.820 0.374 0.807 0.031 9.5 20.5 0.8
150334*63BB^ 0.330 0.236 0.650 0.024 6.0 16.5 0.6 150105*100IC^ 1.000 0.394 0.807 0.031 10.0 20.5 0.8
150394*63CB^ 0.390 0.256 0.650 0.024 6.5 16.5 0.6 100 Vdc
150474*63DB^ 0.470 0.276 0.650 0.024 7.0 16.5 0.6 150155*100IE^ 1.500 0.394 1.102 0.031 10.0 28.0 0.8
150564*63DB^ 0.560 0.276 0.650 0.024 7.0 16.5 0.6 150225*100LE^ 2.200 0.453 1.102 0.031 11.5 28.0 0.8
150684*63DC^ 0.680 0.276 0.807 0.024 7.0 20.5 0.6 150335*100PE^ 3.300 0.531 1.102 0.031 13.5 28.0 0.8
150824*63EC^ 0.820 0.315 0.807 0.031 8.0 20.5 0.8 150475*100RF^ 4.700 0.591 1.299 0.031 15.0 33.0 0.8
150105*63EC^ 1.000 0.315 0.807 0.031 8.0 20.5 0.8 150685*100WF^ 6.800 0.689 1.299 0.031 17.5 33.0 0.8
150155*63HC^ 1.500 0.374 0.807 0.031 9.5 20.5 0.8 150106*100YF^ 10.000 0.807 1.299 0.031 20.5 33.0 0.8
150225*63HE^ 2.200 0.374 1.102 0.031 9.5 28.0 0.8 250 Vdc
150335*63KE^ 3.300 0.433 1.102 0.031 11.0 28.0 0.8 150123*250AA^ 0.012 0.197 0.433 0.024 5.0 11.0 0.6
150475*63ME^ 4.700 0.492 1.102 0.031 12.5 28.0 0.8 150123*250BB^ 0.012 0.236 0.650 0.024 6.0 16.5 0.6
150685*63QF^ 6.800 0.571 1.299 0.031 14.5 33.0 0.8 150153*250AA^ 0.015 0.197 0.433 0.024 5.0 11.0 0.6
150106*63TF^ 10.000 0.610 1.299 0.031 15.5 33.0 0.8 150153*250BB^ 0.015 0.236 0.650 0.024 6.0 16.5 0.6
100 Vdc 150183*250AA^ 0.018 0.197 0.433 0.024 5.0 11.0 0.6
150683*100AA^ 0.068 0.197 0.433 0.024 5.0 11.0 0.6 150183*250BB^ 0.018 0.236 0.650 0.024 6.0 16.5 0.6
150683*100BB^ 0.068 0.236 0.650 0.024 6.0 16.5 0.6 150223*250AA^ 0.022 0.197 0.433 0.024 5.0 11.0 0.6
150823*100AA^ 0.082 0.197 0.433 0.024 5.0 11.0 0.6 150223*250BB^ 0.022 0.236 0.650 0.024 6.0 16.5 0.6
150823*100BB^ 0.082 0.236 0.650 0.024 6.0 16.5 0.6 150273*250AA^ 0.027 0.197 0.433 0.024 5.0 11.0 0.6
150104*100AA^ 0.100 0.197 0.433 0.024 5.0 11.0 0.6 150273*250BB^ 0.027 0.236 0.650 0.024 6.0 16.5 0.6
150104*100BB^ 0.100 0.236 0.650 0.024 6.0 16.5 0.6 * Indicates capacitance tolerance ^If ordering tape and reel,
150124*100BB^ 0.120 0.236 0.650 0.024 6.0 16.5 0.6 J = ±5%, K = ±10%, M = ±20% insert 1, 2, or 3.
150154*100BB^ 0.150 0.236 0.650 0.024 6.0 16.5 0.6 See tape & reel specifications to determine which class applies.
150184*100CB^ 0.180 0.256 0.650 0.024 6.5 16.5 0.6 Part Number highlighted in yellow, available until stock is depleted.
150224*100CB^ 0.220 0.256 0.650 0.024 6.5 16.5 0.6 Replacement part number with “BB” case size.
Part Number highlighted in green - OBSOLETE
Part number highlighted in light yellow, available until stock is depleted, no replacement
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 150 Axial Leaded Metallized Polyester
Catalog Cap Inches Max Millimeters Max Catalog Cap Inches Max Millimeters Max
Part Number (µF) D L Ød D L Ød Part Number (µF) D L Ød D L Ød
250 Vdc 150683*400DC^ 0.0680 0.276 0.807 0.024 7.0 20.5 0.6
150333*250AA^ 0.0330 0.197 0.433 0.024 5.0 11.0 0.6 150823*400EC^ 0.0820 0.315 0.807 0.031 8.0 20.5 0.8
150333*250BB^ 0.0330 0.236 0.650 0.024 6.0 16.5 0.6 150104*400EC^ 0.1000 0.315 0.807 0.031 8.0 20.5 0.8
150393*250AA^ 0.0390 0.197 0.433 0.024 5.0 11.0 0.6 150124*400EC^ 0.1200 0.315 0.807 0.031 8.0 20.5 0.8
150393*250BB^ 0.0390 0.236 0.650 0.024 6.0 16.5 0.6 150154*400GC^ 0.1500 0.354 0.807 0.031 9.0 20.5 0.8
150473*250AA^ 0.0470 0.197 0.433 0.024 5.0 11.0 0.6 150184*400EE^ 0.1800 0.315 1.102 0.031 8.0 28.0 0.8
150473*250BB^ 0.0470 0.236 0.650 0.024 6.0 16.5 0.6 150224*400FE^ 0.2200 0.335 1.102 0.031 8.5 28.0 0.8
150563*250AA^ 0.0560 0.197 0.433 0.024 5.0 11.0 0.6 150274*400GE^ 0.2700 0.354 1.102 0.031 9.0 28.0 0.8
150563*250BB^ 0.0560 0.236 0.650 0.024 6.0 16.5 0.6 150334*400IE^ 0.3300 0.394 1.102 0.031 10.0 28.0 0.8
150683*250BB^ 0.0680 0.236 0.650 0.024 6.0 16.5 0.6 150394*400JE^ 0.3900 0.413 1.102 0.031 10.5 28.0 0.8
150823*250BB^ 0.0820 0.236 0.650 0.024 6.0 16.5 0.6 150474*400LF^ 0.4700 0.453 1.299 0.031 11.5 33.0 0.8
150104*250CB^ 0.1000 0.256 0.650 0.024 6.5 16.5 0.6 150564*400LF^ 0.5600 0.453 1.299 0.031 11.5 33.0 0.8
150124*250DB^ 0.1200 0.276 0.650 0.024 7.0 16.5 0.6 150684*400MF^ 0.6800 0.492 1.299 0.031 12.5 33.0 0.8
150154*250EB^ 0.1500 0.315 0.650 0.031 8.0 16.5 0.8 150824*400PF^ 0.8200 0.531 1.299 0.031 13.5 33.0 0.8
150184*250EB^ 0.1800 0.315 0.650 0.031 8.0 16.5 0.8 150105*400QF^ 1.0000 0.571 1.299 0.031 14.5 33.0 0.8
150224*250FB^ 0.2200 0.335 0.650 0.031 8.5 16.5 0.8 150155*400WF^ 1.5000 0.689 1.299 0.031 17.5 33.0 0.8
150274*250EC^ 0.2700 0.315 0.807 0.031 8.0 20.5 0.8 150225*400YF^ 2.2000 0.807 1.299 0.031 20.5 33.0 0.8
150334*250FC^ 0.3300 0.335 0.807 0.031 8.5 20.5 0.8 630 Vdc
150394*250GC^ 0.3900 0.354 0.807 0.031 9.0 20.5 0.8 150102*630AA^ 0.0010 0.197 0.433 0.024 5.0 11.0 0.6
150474*250HC^ 0.4700 0.374 0.807 0.031 9.5 20.5 0.8 150102*630BB^ 0.0010 0.236 0.650 0.024 6.0 16.5 0.6
150564*250IC^ 0.5600 0.394 0.807 0.031 10.0 20.5 0.8 150122*630AA^ 0.0012 0.197 0.433 0.024 5.0 11.0 0.6
150684*250GE^ 0.6800 0.354 1.102 0.031 9.0 28.0 0.8 150122*630BB^ 0.0012 0.236 0.650 0.024 6.0 16.5 0.6
150824*250HE^ 0.8200 0.374 1.102 0.031 9.5 28.0 0.8 150152*630AA^ 0.0015 0.197 0.433 0.024 5.5 11.0 0.6
150105*250JE^ 1.0000 0.413 1.102 0.031 10.5 28.0 0.8 150152*630BB^ 0.0015 0.236 0.650 0.024 6.0 16.5 0.6
150155*250ME^ 1.5000 0.492 1.102 0.031 12.5 28.0 0.8 150182*630AA^ 0.0018 0.197 0.433 0.024 5.5 11.0 0.6
150225*250PF^ 2.2000 0.531 1.299 0.031 13.5 33.0 0.8 150182*630BB^ 0.0018 0.236 0.650 0.024 6.0 16.5 0.6
150335*250TF^ 3.3000 0.610 1.299 0.031 15.5 33.0 0.8 150222*630AA^ 0.0022 0.197 0.433 0.024 5.5 11.0 0.6
150475*250XF^ 4.7000 0.728 1.299 0.031 18.5 33.0 0.8 150222*630BB^ 0.0022 0.236 0.650 0.024 6.0 16.5 0.6
150685*250ZF^ 6.8000 0.845 1.299 0.031 21.5 33.0 0.8 150272*630AA^ 0.0027 0.197 0.433 0.024 5.5 11.0 0.6
400 Vdc 150272*630BB^ 0.0027 0.236 0.650 0.024 6.0 16.5 0.6
150822*400AA^ 0.0082 0.197 0.433 0.024 5.0 11.0 0.6 150332*630AA^ 0.0033 0.197 0.433 0.024 5.5 11.0 0.6
150822*400BB^ 0.0082 0.236 0.650 0.024 6.0 16.5 0.6 150332*630BB^ 0.0033 0.236 0.650 0.024 6.0 16.5 0.6
150103*400AA^ 0.0100 0.197 0.433 0.024 5.0 11.0 0.6 150392*630AA^ 0.0039 0.197 0.433 0.024 5.5 11.0 0.6
150103*400BB^ 0.0100 0.236 0.650 0.024 6.0 16.5 0.6 150392*630BB^ 0.0039 0.236 0.650 0.024 6.0 16.5 0.6
150123*400AA^ 0.0120 0.197 0.433 0.024 5.0 11.0 0.6 150472*630AA^ 0.0047 0.197 0.433 0.024 5.5 11.0 0.6
150123*400BB^ 0.0120 0.236 0.650 0.024 6.0 16.5 0.6 150472*630BB^ 0.0047 0.236 0.650 0.024 6.0 16.5 0.6
150153*400BB^ 0.0150 0.236 0.650 0.024 6.0 16.5 0.6 150562*630AA^ 0.0056 0.197 0.433 0.024 5.5 11.0 0.6
150183*400BB^ 0.0180 0.236 0.650 0.024 6.0 16.5 0.6 150562*630BB^ 0.0056 0.236 0.650 0.024 6.0 16.5 0.6
150223*400BB^ 0.0220 0.236 0.650 0.024 6.0 16.5 0.6 * Indicates capacitance tolerance ^If ordering tape and reel,
150273*400BB^ 0.0270 0.236 0.650 0.024 6.0 16.5 0.6 J = ±5%, K = ±10%, M = ±20% insert 1, 2, or 3.
150333*400BB^ 0.0330 0.236 0.650 0.024 6.0 16.5 0.6 See tape & reel specifications to determine which class applies.
150393*400CB^ 0.0390 0.256 0.650 0.024 6.5 16.5 0.6 Part Number highlighted in yellow, available until stock is depleted.
150473*400DB^ 0.0470 0.276 0.650 0.024 7.0 16.5 0.6 Replacement part number with “BB” case size.
150563*400EB^ 0.0560 0.315 0.650 0.024 8.0 16.5 0.6 Part Number highlighted in green - OBSOLETE
Part number highlighted in light yellow, available until stock is depleted, no replacement
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Type 150 Axial Leaded Metallized Polyester
Catalog Cap Inches Max Millimeters Max Catalog Cap Inches Max Millimeters Max
Part Number (µF) D L Ød D L Ød Part Number (µF) D L Ød D L Ød
630 Vdc 1000 Vdc
150682*630AA^ 0.0068 0.197 0.433 0.024 5.5 11.0 0.6 150102*1000CB^ 0.0010 0.256 0.650 0.024 6.5 16.5 0.6
150682*630BB^ 0.0068 0.236 0.650 0.024 6.0 16.5 0.6 150152*1000CB^ 0.0015 0.256 0.650 0.024 6.5 16.5 0.6
150822*630BB^ 0.0082 0.236 0.650 0.024 6.0 16.5 0.6 150222*1000CB^ 0.0022 0.256 0.650 0.024 6.5 16.5 0.6
150103*630BB^ 0.0100 0.236 0.650 0.024 6.0 16.5 0.6 150332*1000CB^ 0.0033 0.256 0.650 0.024 6.5 16.5 0.6
150123*630BB^ 0.0120 0.236 0.650 0.024 6.0 16.5 0.6 150472*1000DB^ 0.0047 0.276 0.650 0.024 7.0 16.5 0.6
150153*630BB^ 0.0150 0.236 0.650 0.024 6.0 16.5 0.6 150682*1000EB^ 0.0068 0.315 0.650 0.031 8.0 16.5 0.8
150183*630CB^ 0.0180 0.256 0.650 0.024 6.5 16.5 0.6 150103*1000DC^ 0.0100 0.276 0.807 0.024 7.0 20.5 0.6
150223*630DB^ 0.0220 0.276 0.650 0.024 7.0 16.5 0.6 150153*1000FC^ 0.0150 0.335 0.807 0.031 8.5 20.5 0.8
150273*630CC^ 0.0270 0.256 0.807 0.024 6.5 20.5 0.6 150223*1000HC^ 0.0220 0.374 0.807 0.031 9.5 20.5 0.8
150333*630EC^ 0.0330 0.315 0.807 0.031 8.0 20.5 0.8 150333*1000FE^ 0.0330 0.335 1.102 0.031 8.5 28 0.8
150393*630EC^ 0.0390 0.315 0.807 0.031 8.0 20.5 0.8 150473*1000HE^ 0.0470 0.374 1.102 0.031 9.5 28 0.8
150473*630EC^ 0.0470 0.315 0.807 0.031 8.0 20.5 0.8 150683*1000KE^ 0.0680 0.433 1.102 0.031 11.0 28 0.8
150563*630FC^ 0.0560 0.335 0.807 0.031 8.5 20.5 0.8 150104*1000NE^ 0.1000 0.512 1.102 0.031 13.0 28 0.8
150683*630GC^ 0.0680 0.354 0.807 0.031 9.0 20.5 0.8 150154*1000OF^ 0.1500 0.551 1.299 0.031 14.0 33 0.8
150823*630HC^ 0.0820 0.374 0.807 0.031 9.5 20.5 0.8 150224*1000WF^ 0.2200 0.689 1.299 0.031 17.5 33 0.8
150104*630FE^ 0.1000 0.335 1.102 0.031 8.5 28.0 0.8 150334*1000YF^ 0.3300 0.807 1.299 0.031 20.5 33 0.8
150124*630GE^ 0.1200 0.354 1.102 0.031 9.0 28.0 0.8 150474*1000Z1F^ 0.4700 0.945 1.299 0.031 24.0 33 0.8
150154*630IE^ 0.1500 0.394 1.102 0.031 10.0 28.0 0.8
150184*630JE^ 0.1800 0.413 1.102 0.031 10.5 28.0 0.8
150224*630LE^ 0.2200 0.453 1.102 0.031 11.5 28.0 0.8 * Indicates capacitance tolerance ^If ordering tape and reel,
150274*630ME^ 0.2700 0.492 1.102 0.031 12.5 28.0 0.8 J = ±5%, K = ±10%, M = ±20% insert 1, 2, or 3.
150334*630NF^ 0.3300 0.512 1.299 0.031 13.0 33.0 0.8 See tape & reel specifications to determine which class applies.
150394*630QF^ 0.3900 0.571 1.299 0.031 14.5 33.0 0.8 Part Number highlighted in yellow, available until stock is depleted.
150474*630RF^ 0.4700 0.591 1.299 0.031 15.0 33.0 0.8 Replacement part number with “BB” case size.
150564*630TF^ 0.5600 0.610 1.299 0.031 15.5 33.0 0.8 Part Number highlighted in green - OBSOLETE
150684*630WF^ 0.6800 0.689 1.299 0.031 17.5 33.0 0.8
150824*630XF^ 0.8200 0.728 1.299 0.031 18.5 33.0 0.8
150105*630YF^ 1.0000 0.807 1.299 0.031 20.5 33.0 0.8
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the
“Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirm-
ing and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order
at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without
any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain
applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”)
has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended
to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and ex-
pressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use,
storage, transportation, or operating environment. The Information is intended for use only by customers who have the requi-
site experience and capability to determine the correct products for their application. Any technical advice inferred from this
Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis
(unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given
or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the
design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other
safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to
ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all
product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are
indicated in such warnings, cautions and notes, or that other safety measures may not be required.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods