Type 167/184 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion The Type 167/184 series radial lead metallized polyes- ter box capacitors are available in bulk (Type 167) or on ammo pack or radial tape and reel (Type 184). These capacitors are constructed in rugged rectangular plas- tic cases and all come with 7.5 mm (0.3”) lead spacing. They are good for general purpose applications such as bypass, decoupling, energy storage/discharge and arc suppression. Highlights • Rugged plastic case • Case and epoxy fill meets UL94V0 • 7.5 mm (0.3”) lead spacing • Bulk, tape and reel or ammo pack • Non-inductively wound • Non-polar Specifcations RoHS Compliant Capacitance Range: 0.001 µF to 1.0 µF Voltage Range: 63 Vdc to 630 Vdc Capacitance Tolerance: ±5%, ±10%, ±20% Operating Temperature Range: –55 ºC to +125 ºC (with 50% Vdc derating >85 ºC) Dielectric Withstand Voltage: 1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºC –4 Dissipation Factor (DF): tanδ x 10 at 25 ºC ±5 ºC –4 kHz tanδ x 10 1 ≤100 10 ≤150 Total Self Inductance (L): Approximately 8 nH Maximum Pulse Rise Time (dv/dt): Vn V/µs 63 12 100 20 250 32 400 41 630 70 If the working voltage (V) is less than the nominal voltage (Vn), the capacitor can work at higher dv/dt. In this case, the maximum value allowed is obtained by multiplying the above value with the ratio Vn/V. Long Term Stability (after two years) Storage Standard Environmental Conditions Performance Capacitance Change ∆C/C ≤ ±3% CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 167/184 Metallized Polyester Radial Lead Capacitors Capacitor Outline Drawing Test Method and Performance Insulation Resistance T L Test Conditions Max Max Temperature 25 ºC ±5 ºC Voltage Charge Time 1 minute Voltage Charge 50 Vdc for Vn < 100 Vdc H 100 Vdc for Vn ≥ 100 Vdc Performance Max For Vn > 100 Vdc ≥30,000 MΩ (50,000 MΩ typical) For Vn ≤100 Vdc ≥10,000 MΩ for C ≤ 0.1µF .217 ±.039 ≥1,000 MΩ x µF for > 0.1µF (5.5 ±1.0 mm) Damp Heat Test Test Conditions Ød ±.003 S Temperature +40 ºC (±0.076) ±.015 Relative Humidity 95% (±0.4 mm) Test Duration 21 days Performance Lead length shown is as supplied on 167 Series Capacitance Change ∆C/C ≤ ±5% Soldering 4 DF Change ∆tgδ ≤50 x 10 at 1 kHz Test Conditions Insulation Resistance ≥ 50% of limit value Soldering Temperature 260 ºC ±5 ºC Life Test Soldering Duration 10 sec ±1 sec Test Conditions Performance Temperature +85 ºC Capacitance Change ∆C/C ≤ ±2% Test Duration 1000 hrs –4 DF Change ∆tgδ ≤30 x 10 at 10 kHz Voltage Applied 1.25 x Vn Insulation Resistance ≥ limit value Performance Capacitance Change ∆C/C ≤ ±5% –4 DF Change ∆tgδ ≤30 x 10 at 10 kHz Insulation Resistance ≥ 50% of limit value Ratings RoHS Compliant Inches Millimeters Cap Catalog Tape & Reel (µF) Part Number Ammo Pack L T H S Ød L T H S Ød 63 Vdc .068 167683*63A–F 184683*63#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .10 167104*63A–F 184104*63#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .15 167154*63A–F 184154*63#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .22 167224*63A–F 184224*63#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .27 167274*63A–F 184274*63#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .33 167334*63A–F 184334*63#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .47 167474*63B–F 184474*63#B>–F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .68 167684*63C–F 184684*63#C>–F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 1.00 167105*63C–F 184105*63#C>–F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 100 Vdc .033 167333*100A–F 184333*100#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .047 167473*100A–F 184473*100#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .068 167683*100A–F 184683*100#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .10 167104*100A–F 184104*100#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .12 167124*100B–F 184124*100#B>–F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .15 167154*100B–F 184154*100#B>–F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .22 167224*100C–F 184224*100#C>–F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 .33 167334*100C–F 184334*100#C>–F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 * Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20% # Indicates packaging type: R = Tape and Reel, A = Ammo Pack > Indicates tooling code: A = 16.5 mm, B = 18.5 mm, C = 16.0 mm (See H dimension in taping specifications) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 167/184 Metallized Polyester Radial Lead Capacitors Inches Millimeters Cap Catalog Tape & Reel (µF) Part Number Ammo Pack L T H S Ød L T H S Ød 250 Vdc .010 167103*250A–F 184103*250#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .015 167153*250A–F 184153*250#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .018 167183*250A–F 184183*250#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .022 167223*250A–F 184223*250#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .027 167273*250B–F 184273*250#B>–F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .033 167333*250B–F 184333*250#B>–F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .039 167393*250B–F 184393*250#B>–F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .047 167473*250B–F 184473*250#B>–F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .068 167683*250C–F 184683*250#C>–F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 .100 167104*250C–F 184104*250#C>–F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 400 Vdc .0047 167472*400A–F 184472*400#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .0056 167562*400A–F 184562*400#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .0068 167682*400A–F 184682*400#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .010 167103*400A–F 184103*400#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .015 167153*400B–F 184153*400#B>–F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .022 167223*400C–F 184223*400#C>–F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 .033 167333*400C–F 184333*400#C>–F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 630 Vdc .0010 167102*630A–F 184102*630#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .0015 167152*630A–F 184152*630#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .0022 167222*630A–F 184222*630#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .0033 167332*630A–F 184332*630#A>–F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .0047 167472*630B–F 184472*630#B>–F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .0068 167682*630B–F 184682*630#B>–F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .010 167103*630C–F 184103*630#C>–F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 .015 167153*630D–F 184153*630#D>–F 0.413 0.236 0.472 0.295 0.024 10.5 6.0 12.0 7.5 0.6 * Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20% # Indicates packaging type: R = Tape and Reel, A = Ammo Pack > Indicates tooling code: A = 16.5 mm, B = 18.5 mm, C = 16.0 mm (See H dimension in taping specification) Part Numbering System for Bulk Items 167 104 K 100 A -F Case RoHS Series Capacitance Tolerance Voltage Code Compliant 167 392 = .0039 µF J = ±5% 63 = 63 Vdc A Designator 103 = .01 µF K = ±10% 100 = 100 Vdc B 104 = .1 µF M = ±20% 250 = 250 Vdc C 105 = 1.0 µF 630 = 630 Vdc D CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type 167/184 Metallized Polyester Radial Lead Capacitors Tape Specifcation - 7.5 mm Lead Spacing 30 mm 1.18” Reel ΔH Packing P1 331 mm 13.04” Ød Ammo Box Packing P Po Do 47 mm Max 335 mm Max 1.85” 13.19” Item Code Millimeters Inches Case Quantity Quantity +0.04 –0.01 ±.001 Code Reeled Ammo Pack Lead-Wire Diameter Ød 0.6 .024 A 1800 1500 +0.6 –0.2 +.024 –.040 Lead-to-Lead Distance P 7.5 .295 B 1500 1500 ±0.3 ±.012 Feed Hole Pitch P 2.7 .5 0 C 1200 1000 ±1.0 ±.039 Pitch of Component P 12.7 .5 1 D 1000 1000 ±0.7 ±.028 Hole Center to Lead P 3.75 .148 2 > The H dimension depends on the ±2.0 ±.079 Component Alignment, F-R ∆h 0 0 insertion equipment used. Specify +1.0 –0.1 +.039 –.004 the proper tooling code as indicated Tape Width W 18 .709 below. Hold-down Tape Width W 6.0 min .236 min 0 +0.75 –0.05 +.030 –.001 Hole Position W 9.0 .355 1 Tooling H Dimensions Hold-down Tape Position W 3.0 Max .118 Max Code Millimeters Inches 2 ±0.75 ±.030 A 16.5 .679 Height of Component H > > ±0.75 ±.030 B 18.5 .728 from Tape Center ±0.75 ±030 C 16.0 .630 ±0.3 ±.012 Feed Hole Diameter D 4.0 .157 0 Part Numbering System for Auto Insertion 184 104 K 100 R A B -F Packaging *Tooling RoHS Type Case Code Compliant Series Capacitance Tolerance Voltage (#) Code (>) Designator 184 392 = .0039 µF J = ±5% 63 = 63 Vdc A = Ammo A A 103 = .01 µF K = ±10% 100 = 100 Vdc R = Tape & Reel B B 104 = .1 µF M = ±20% 250 = 250 Vdc C C 105 = 1.0 µF 630 = 630 Vdc D * Tooling code is at the discretion of the user depending on the insertion equipment being used. See table for specific "H" dimensions * Tooling code (>) depends on the users insertion equipment requirements. See table for available options. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com H W W1 Wo W2 280 mm Max 11.02” Type 167/184 Metallized Polyester Radial Lead Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com