CORNELL DUBILIER 170103J250AA

Type 170 Axial Leaded Metallized Polypropylene High Current / Low ESR, Wrap and Fill Axial Leaded Capacitors The Type 170 series axial lead metallized polypropylene capacitors are available in bulk or on tape and reel for automatic insertion. The tape wrap and epoxy end fill construction meets UL510 (outer wrap) and UL94V0 (epoxy). Type 170 is non-inductive with low ESR and high current capability for switch-mode power supply applications Highlights • Low ESR • High current • Available on tape and reel or bulk • Epoxy end fill meets UL94V-0 • Non inductively wound • Flame retardant outer wrap meets UL510 Specifications Capacitance Range: 0.001 µF to 4.7 µF Voltage Range: 160 to 630 Vdc (90 to 250 Vac, 60 Hz) Capacitance Tolerance: ±5%, ±10%, ±20% Operating Temperature Range: –55 ºC to +105 ºC (derate linearly to 50% rated voltage at 105 ºC) Dielectric Withstand Voltage: 1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC –4 Dissipation Factor (DF): tgδ x 10 at +25 ºC ±5 ºC kHz C ≤0.1 µF 0.1 µF 1 µF 1 ≤6 ≤6 ≤6 10 ≤10 ≤20 — 100 ≤30 — — Insulation Resistance: 100,000 MΩ x µF, 200,000 MΩ Min. Self Inductance: 1 nH max. per 1 mm lead and body length Life Test: 1000 hrs @ 85 ºC 1.25 x Vn Damp Heat Test: 95% RH @ +40 ºC for 21 days Soldering: 260 ºC ±5 ºC for 10 s ±1 s Long Term Storage Stability: ΔC/C ≤ ±0.5% after 2 years Maximum Pulse Rise Time dv/dt and Pulse L Max Characteristic (Wo): Vn 11 16.5 20.5 28 33 160 5 5 3 2 1 Complies with the EU Directive 250 11 10 7 4 2.5 2 0 0 2 / 9 5 / E C r e q u i r e m e n t 400 – 13.5 10 6.5 4 restricting the use of Lead (Pb), 630 – 20 15 10 6 Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), If the working voltage (V) is less than the nominal voltage (Vn), the capaci- PolyBrominated Biphenyls (PBB) tor can work at higher dv/dt . In this case, the maximum value allowed and PolyBrominated Diphenyl is obtained by multiplying the above value (See table dv/dt) with the ratio Ethers (PBDE). Vn/V Outline Drawing Ød ±.003 ±0.076 mm) 1.58 ±0.2 1.58 ±0.2 L D (40 ±5 mm) (40 ±5 mm) Max Max Lead Material: tinned copper wire CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type 170 Axial Leaded Metallized Polypropylene Tape and Reel Specifications L Max Distance Between Diameter Lead Spacing Inches mm Quantity per Reel (Body Length) Reel Flanges Class 0.197 5 3,000 Inches mm Inches mm Inches mm .236 thru .256 6.0 thru 6.5 1,200 ≤.433 ≤11 2.06 52.4 3.0 75 1 0.276 7 1,100 .551 - .808 14 - 20.5 2.50 63.6 3.4 86 2 .315 thru .346 8 thru 8.5 800 ≥1.03 ≥26 2.87 73.0 3.7 95 3 .354 thru .413 9 thru 10.5 500 Λ Add class number (1, 2 or 3) to Catalog Part Number to indicate tape and .433 thru .512 11 thru 13 300 reel .551 thru .571 14 thru 14.5 200 >0.571 14.5 Not available Ratings Inches (mm) IRMS (Amps) Inches (mm) IRMS (Amps) ESR ESR (mΩ) (mΩ) 20 kHz 20 kHz Catalog to Cap Catalog to Cap 100 100 Ød Part Number D Max L Max Ød kHz 25 ºC 45 ºC 85 ºC (µF) Part Number D Max L Max kHz 25 ºC 45 ºC 85 ºC (µF) 160 Vdc / 90 Vac 60 Hz 250 Vdc / 200 Vac 60 Hz 0.022 170223*160AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.01 170103*250AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.022 170223*160BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.01 170103*250BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.027 170273*160AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.012 170123*250AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.027 170273*160BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.012 170123*250BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.033 170333*160AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.015 170153*250AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.033 170333*160BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.015 170153*250BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.039 170393*160AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.018 170183*250BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.039 170393*160BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.022 170223*250BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.047 170473*160AA^ 0.197 (5.0) 0.433 (11.0) 0.02 (0.5) 0.027 170273*250BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) Not applicable. These 0.047 170473*160BB^ 0.236 (6.0) 0.65 (16.5) 0.02 (0.5) 0.033 170333*250BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) capacitance values are Not applicable. These 0.056 170563*160BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) not customarily used in 0.039 170393*250CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) capacitance values are switched-mode power 0.068 170683*160BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.047 170473*250CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) not customarily used in supplies. switched-mode power 0.082 170823*160BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.056 170563*250EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) supplies. 0.1 170104*160BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.068 170683*250EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.12 170124*160DB^ 0.276 (7.0) 0.65 (16.5) 0.024 (0.6) 0.082 170823*250FB^ 0.335 (8.5) 0.65 (16.5) 0.031 (0.8) 0.15 170154*160DB^ 0.276 (7.0) 0.65 (16.5) 0.024 (0.6) 0.1 170104*250FB^ 0.335 (8.5) 0.65 (16.5) 0.031 (0.8) 0.18 170184*160EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.12 170124*250FC^ 0.335 (8.5) 0.807 (20.5) 0.031 (0.8) 0.22 170224*160EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.15 170154*250FC^ 0.335 (8.5) 0.807 (20.5) 0.031 (0.8) 0.27 170274*160EC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) 0.18 170184*250HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 0.33 170334*160EC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) 0.22 170224*250HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 0.39 170394*160HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 0.27 170274*250GE^ 0.354 (9.0) 1.102 (28) 0.031 (0.8) 0.47 170474*160HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 37 8.7 3.1 1.4 0.33 170334*250GE^ 0.354 (9.0) 1.102 (28) 0.031 (0.8) 0.56 170564*160GE^ 0.354 (9.0) 1.102 (28) 0.031 (0.8) 35 3.9 3.3 1.5 0.39 170394*250JE^ 0.413 (10.5) 1.102 (28) 0.031 (0.8) 0.68 170684*160GE^ 0.354 (9.0) 1.102 (28) 0.031 (0.8) 33 4.1 3.5 1.6 0.47 170474*250JE^ 0.413 (10.5) 1.102 (28) 0.031 (0.8) 35 3.8 3.6 1.7 0.82 170824*160JE^ 0.413 (10.5) 1.102 (28) 0.031 (0.8) 31 4.3 3.6 1.7 0.56 170564*250ME^ 0.472 (12.0) 1.102 (28) 0.031 (0.8) 33 3.9 3.7 1.8 1 170105*160JE^ 0.413 (10.5) 1.102 (28) 0.031 (0.8) 26 5.5 4.7 2.6 0.68 170684*250ME^ 0.472 (12.0) 1.102 (28) 0.031 (0.8) 32 4 3.8 1.9 1.5 170155*160ME^ 0.472 (12.0) 1.102 (28) 0.031 (0.8) 20 6.1 5.1 3.1 0.82 170824*250NF^ 0.512 (13.0) 1.299 (33) 0.031 (0.8) 31 4.2 4 2 2.2 170225*160PF^ 0.531 (13.5) 1.299 (33) 0.031 (0.8) 18 6.8 5.7 3.3 1 170105*250NF^ 0.512 (13.0) 1.299 (33) 0.031 (0.8) 28 4.4 4.4 3.2 3.3 170335*160TF^ 0.610 (15.5) 1.299 (33) 0.039 (1.0) 16 7.4 6.4 3.6 1.5 170155*250TF^ 0.610 (15.5) 1.299 (33) 0.031 (0.8) 26 5.1 4.9 3.5 4.7 170475*160XF^ 0.709 (18.0) 1.299 (33) 0.039 (1.0) 15 8.1 6.8 3.9 2.2 170225*250XF^ 0.709 (18.0) 1.299 (33) 0.039 (1.0) 20 8.4 7 4.1 * Indicates capacitance tolerance ^If ordering tape and reel, insert 1,2, or 3. 3.3 170335*250ZF^ 0.827 (21.0) 1.299 (33) 0.039 (1.0) 18 9 7.8 4.5 J = ±5%, K = ±10%, M = ±20% See tape & reel specifications to determine which class applies. Replacement Part No. with "BB" case size. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type 170 Axial Leaded Metallized Polypropylene ESR (mΩ) ESR (mΩ) Cap Inches (mm) IRMS (Amps) Cap Inches (mm) IRMS (Amps) Catolog 20 kHz to Catolog 20 kHz to (µF) Part Number D Max L Max Ød 100 kHz 25 ºC 45 ºC 85 ºC (µF) Part Number D Max L Max Ød 100 kHz 25 ºC 45 ºC 85 ºC 400 Vdc / 220 Vac 60 Hz 630 Vdc / 250 Vac 60 Hz 0.015 170153*400BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.001 170102*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.018 170183*400CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.0012 170122*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.022 170223*400CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.0015 170152*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.027 170273*400DB^ 0.276 (7.0) 0.65 (16.5) 0.024 (0.6) 0.0018 170182*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.033 170333*400DB^ 0.276 (7.0) 0.65 (16.5) 0.024 (0.6) 0.0022 170222*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.039 170393*400EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.0027 170272*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.047 170473*400EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.0033 170332*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) 0.056 170563*400EC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) 0.0039 170392*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) Not applicable. 0.068 170683*400EC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) 0.0047 170472*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) These capacitance values are not customarily used in 0.082 170823*400GC^ 0.354 (9.0) 0.807 (20.5) 0.031 (0.8) 0.0056 170562*630BB^ 0.236 (6.0) 0.65 (16.5) 0.024 (0.6) switched-mode power supplies 0.10 170104*400GC^ 0.354 (9.0) 0.807 (20.5) 0.031 (0.8) 0.0068 170682*630CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.12 170124*400FE^ 0.335 (8.5) 1.102 (28) 0.031 (0.8) 0.0082 170822*630CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.15 170154*400FE^ 0.335 (8.5) 1.102 (28) 0.031 (0.8) 0.010 170103*630CB^ 0.256 (6.5) 0.65 (16.5) 0.024 (0.6) 0.18 170184*400IE^ 0.394 (10) 1.102 (28) 0.031 (0.8) 0.012 170123*630EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) 0.22 170224*400IE^ 0.394 (10) 1.102 (28) 0.031 (0.8) 0.015 170153*630EB^ 0.315 (8.0) 0.65 (16.5) 0.031 (0.8) Not Applicable. 0.27 170274*400LE^ 0.453 (11.5) 1.102 (28) 0.031 (0.8) 0.018 170183*630FB^ 0.335 (8.5) 0.65 (16.5) 0.031 (0.8) These capacitance values are not customarily used in 0.33 170334*400LE^ 0.453 (11.5) 1.102 (28) 0.031 (0.8) 0.022 170223*630FB^ 0.335 (8.5) 0.65 (16.5) 0.031 (0.8) switched-mode power supplies 0.39 170394*400NE^ 0.512 (13.0) 1.102 (28) 0.031 (0.8) 0.027 170273*630FC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) 0.47 170474*400NE^ 0.512 (13.0) 1.102 (28) 0.031 (0.8) 32 5.7 5 2.2 0.033 170333*630FC^ 0.315 (8.0) 0.807 (20.5) 0.031 (0.8) 0.56 170564*400QF^ 0.571 (14.5) 1.299 (33) 0.031 (0.8) 31 5.7 5.3 2.3 0.039 170393*630HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 0.68 170684*400QF^ 0.571 (14.5) 1.299 (33) 0.031 (0.8) 30 5.7 5.5 2.4 0.047 170473*630HC^ 0.374 (9.5) 0.807 (20.5) 0.031 (0.8) 0.82 170824*400VF^ 0.669 (17) 1.299 (33) 0.039 (1.0) 28 5.7 5.6 2.6 0.056 170563*630GE^ 0.354 (9.0) 1.102 (28) 0.031 (0.8) 1.0 170105*400VF^ 0.669 (17) 1.299 (33) 0.039 (1.0) 27 5.7 5.7 4.3 0.068 170683*630GE^ 0.354 (9.0) 1.102 (28) 0.031 (0.8) 1.5 170155*400YF^ 0.807 (20.5) 1.299 (33) 0.039 (1.0) 25 7 6.7 4.7 0.082 170823*630IE^ 0.394 (10) 1.102 (28) 0.031 (0.8) * Indicates Tolerance J = ±5%, K = ±10%, M = ±20% Λ 0.100 170104*630IE^ 0.394 (10) 1.102 (28) 0.031 (0.8) If ordering Tape & Reel, see specification to determine which class (1, 2, or 3) applies 0.120 170124*630ME^ 0.472 (12.0) 1.102 (28) 0.031 (0.8) 0.150 170154*630ME^ 0.472 (12.0) 1.102 (28) 0.031 (0.8) 0.180 170184*630NF^ 0.512 (13.0) 1.299 (33) 0.031 (0.8) 0.220 170224*630NF^ 0.512 (13.0) 1.299 (33) 0.031 (0.8) 0.270 170274*630TF^ 0.610 (15.5) 1.299 (33) 0.031 (0.8) 0.330 170334*630TF^ 0.610 (15.5) 1.299 (33) 0.031 (0.8) 0.390 170394*630XF^ 0.709 (18.0) 1.299 (33) 0.039 (1.0) 0.470 170474*630XF^ 0.709 (18.0) 1.299 (33) 0.039 (1.0) 28 6.8 5.8 2.6 0.560 170564*630ZF^ 0.827 (21.0) 1.299 (33) 0.039 (1.0) 26 7.4 6.3 2.8 0.680 170684*630ZF^ 0.827 (21.0) 1.299 (33) 0.039 (1.0) 25 7.8 6.8 2.9 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com OBSOLETE