CORNELL DUBILIER 225P68394XD3

Type 225P, Orange Drop®, Polyester Film/Foil Capacitors Features • Radial-lead. Pressed profile. • Non-inductively wound, extended foil construction. • Over 35 years o f proven dependability. Insulation Resistance: • Wide availability through CDE At +25°C: 100,000 M
for  .25 µF Distribution. 25,000 M
-µF for C > .25 µF At +85°C: 10,000 M
for C  .15 µF Specifications 1,500M
-µF for C >.15 µ F At+105°C: 1.500 M
for C  .17 µ F Capacitance Range: 250 M
-µF for C > .17µF .00 to 1.0 µF At +125°C: 200 M
for C  .13 µ F 25 M
-µF for C >.13 µF Capacitance Tolerance: ±5%, ±10%, ±20% Dissipation Factor: 0.75% Maximum @ 1 KHz, +25°C Voltage Ratings: 100 to 600 Volts DC Encapsulation: Conformal coating of orange, flame retardant epoxy. Meets UL94V-0 Operating Temperature Range: specifications. -55°C to +85°C (at full voltage) Dielectric/Construction: Voltage Derating: Polyester film, single section design. At +105°C, 70% of +85°C rating. Non-inductively wound with extended At +125°C, 50% of +85°C rating. aluminum foil. Lead Wire: Tinned copper-clad steel, .032 (0.8) diameter, #20 AWG Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 225P, Orange Drop®, Polyester Film/Foil Capacitors General Specifications ® The Type 225P Orange Drop is designed and manufactured for operation in a wide range of demanding envi- ronments and applications. Type 225P capacitors are wound from the most reliable polyester film and alum- inum foil available and are protected by a rugged conformal coating of orange epoxy. They may be operated up to +125 °C with proper derating. The combination of proven dependability and extensive availability through CDE distribution make the 225P an ideal choice for many commercial and industrial electronic applications, from power supplies and instrumentation to audio amplifiers and test equipment. Operating Temperature Range : Humidity Testing: The standard operating temperature range for Units subjected to 95% relative humidity for 72 polyester film is -55°C to +85°C. The 225P hours with no voltage applied at +75°C. After 4 may be operated a t full voltage within this hours of drying minimum product of insulation temperature range. resistance and capacitance shall be 5,000 M -µF. The 225P may be operated up to +105°C DC Voltage Life Test: provided the DC working voltage is reduced to 70% of the +85°C rating (full rating), and 500 hours at +85°C at 150% of rated voltage. After up to +125°C with a 50% reduction from the test; capacitance shall not have changed by more +85°C rating (full rating). than ±5% of initial value, insulation resistance shall For more specific details regarding operation not have decreased by more than 50% of initial value above +85°C please contact our design and dissipation factor shall not have increased to engineering department. more than 1.0%. In addition, there should be no The maximum operating temperature for the open or short circuits, and no sign of visible damage. 225P polyester film capacitors is +125°C. Typical Temperature Characteristics: Dielectric Withstanding Voltage: Units shall withstand a DC potential of 250% of rated voltage applied between terminals for not more than 5 seconds. Lead Bend Test: After 3 consecutive 180° bends. No damage. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 225P, Orange Drop®, Polyester Film/Foil Capacitors Ordering/Part Number information 225P 104 9 1 W D 3 (XXXX) A suffix may be added by the factory to denote special construction. Lead Length 1 = 0.187 (4.7) ± 0.030 (0.8) 2 = 0.250 (6.4) ± 0.030 (0.8) 3 = 1.250 (32) Minimum Custom lead lengths available upon request. Terminal A = Straight Lead B,F = Hairpin Crimp D,G,H = Hockey Stick Crimp Case Code See Standard Sizes/Ratings Table D-C Voltage Rating Expressed in Hundreds of Volts Capacitance Tolerance 0 = ±20%; 9 = ±10%; 5 = ±5% Capacitance Expressed in Picofarads. The first two digits are the significant figures, the third is the number of zeros following, (i.e. 104 = 100000 pF = . 1 µF) CDE Type Number Identifies the basic capacitor design. Standard Marking Format Tolerance codes Sample Marking Description per EIA Standards on unit CDE - CDE Electronics identification 225P - Type number J ±5% CDE225P100V 104K 9810 100V - D-C Voltage rating, Volts K ±10% 104K - Capacitance and tolerance code M ±20% 9810 - Weekly date code (i.e. 10th week of 1998) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 225P, Orange Drop®, Polyester Film/Foil Capacitors Standard Lead Styles TERMINAL A TERMINAL B,F TERMINAL D,G,H Standard Lead Spacings s CASE CODE Term. A Term. B Term. D Term. F Term. G Term. H W 0.197 (5) 0.562 (14.3) 0.562 (14.3) 0.375 (9.5) 0.394 (10) 0.295 (7.5) X 0.613 (15.6) 0.375 (9.5) 0.590 (15) 0.394 (10) 0.295 (7.5) 0.613 (15.6) Y 0.969 (24.6) 0.969 (24.6) 0.719 (18.3) 0.886 (22.5) 0.590 (15) --- Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 225P, Orange Drop®, Polyester Film/Foil Capacitors 2 Type 225P Standard Sizes/Ratings 1 1 Part Number Value, µF L MAX T MAX HMAX Value, µF Part Number L MAX T MAX H MAX 100 VDC 200 VDC .80 (20.3) .001 225P10291 W .70 (17.8) .25 (6.4) .35 (8.9) .001 225P10292X .25 (6.4) .55 (14.0) .70 (17.8) .80 (20.3) .0012 225P12291 W .25 (6.4) .35 (8.9) .0012 225P12292X .25 (6.4) .55 (14.0) .80 (20.3) .0015 225P15291 W .70 (17.8) .25 (6.4) .35 (8.9) .0015 225P15292X .25 (6.4) .55 (14.0) .80 (20.3) .0018 225P18291 W .70 (17.8) .25 (6.4) .35 (8.9) .0018 225P18292X .25 (6.4) .55 (14.0) .0022 225P22291 W .70 (17.8) .25 (6,4) .35 (8.9) .0022 225P22292X .80 (20.3) .25 (6.4) .55 (14.0) .0027 225P27291 W .70 (17.8) .25 (6.4) .35 (8.9) .0027 225P27292X .80 (20.3) .25 (6.4) .55 (14.0) .0033 225P33292X .80 (20.3) .25 (6,4) .55 (14.0) 225P33291 W .70 (17.8) .25 (6.4) .0033 .35 (8.9) 225P39291W .70 (17.8 ) .25 (6.4) .0039 225P39292X .80 (20.3) .25 (6.4) .0039 .35 (8.9) .55 (14.0) .80 (20.3) .0047 225P47291 W .70 (17,8) .25 (6.4) .35 (8.9) .0047 225P47292X .25 (6.4) .55 (14.0) .80 (20.3) .0056 225P56291 W .70 (17.8) .25 (6.4) .35 (8.9) .0056 225P56292X .25 (6.4) .58 (14.7) .80 (20.3) .0068 225P68291 W .70 (17.8) .25 (6.4) .35 (8.9) .0068 225P68292X .25 (6.4) .58 (14.7) .80 (20.3) .0082 225P82291 W .70 (17.8) .25 (6.4) .35 (8.9) .0082 225P82292X .25 (6.4) .58 (14.7) .01 225P10392X .80 (20.3) .25 (6.4) .58 (14.7) .70 (17.8) .25 (6.4) .012 225P12392X .80 (20.3) .25 (6.4) .58 (14.7) .01 225P10391 W .35 (8.9) .012 225P12391 W .70 (17.8) .25 (6.4) .35 (8.9) 225P15391 W .70 (17.8 ) .25 (6.4) 225P15392 X .80 (20.3) .25 (6.4) .015 .35 (8.9) .015 .58 (14.7) 225P18392X .80 (20.3) .25 (6.4) .018 225P18391 W .70 (17.8) .25 (6.4) .35 (8.9) .018 .58 (14.7) 225P22392X .80 (20.3) .25 (6.4) .022 225P22391W .70 (17.8) .25 (6.4) .35 (8.9) .022 .58 (14.7) .80 (20.3) .027 22SP27391W .70 (17.8) .27 (6.9) .37 (9.4) .027 225P27392X .28 (7.1) .61 (15.5) .80 (20.3) .033 225P33392X .28 (7.1) .61 (15.5) .80 (20.3) .033 225P33391 W .70 (17.8) .27 (6,9) .37 (9.4) .039 225P39392X .28 (7.1) .61 (15.5) .80 (20.3) .039 225P39391 W .70 (17.8) .30 (7.6) .42 (10.7) .047 225P47392X .28 (7.1) .61 (15.5) .047 225P47391 W .70 (17.8) .30 (7.6) .42 (10.7) 225P56391 W .70 (17.8) .34 (8.6) .056 225P56392X .80 (20.3) .31 (7.9) .056 .49 (12.4) .64 (16.3) .80 (20.3) .068 225P68391 W .70 (17.8 ) .34 (8.6) .49 (12.4) .068 225P68392X .31 (7,9) .64 (16.3) .80 (20.3) .082 225P82391W .70 (17.8) .40 (10.2) .55 (14.0) .082 225P82392X .34 (8.6) .67 (17.0) .1 225P10491 W .70 (17.8) .40 (10.2) .55 (14.0) .1 225P10492X .80 (20.3) .37 (9.4) .71 (18.0) .12 225P12492X .80 (20.3) .39 (9.9) .72 (18.3) 225P12491X .80 (20.3) .37 (9.4) .15 225P15492X .80 (20.3) .41 (10.4) .74 (18.8) .12 .57 (14.5) .40 (10.2) 225P18492X .80 (20.3) .15 225P15491X .80 (20.3) .62 (15.7) .18 .46 (11.7) .75 (19.1) .43 (10.9) 225P22492X .80 (20.3) .48 (12.2) .18 225P18491X .80 (20.3) .66 (16.8) .22 .77 (19.6) .22 225P22491 X .80 (20.3) .46 (11.7) .70 (17.8) 225P27491 X .80 (20.3) .49 (12.4) .74 (18.8) .27 225P27492Y 1.25 (31.8) .39 (9.9) .71 (18.0) .27 225P33491 X .80 (20.3) .52 (13.2) .77 (19.6) .33 225P33492Y 1.25 (31.8) .41 (10.4) .71 (18.0) .33 225P39491 X .80 (20.3) .55 (14.0) .81 (20.6) .39 225P39492Y 1.25 (31.8) .45 (11.4) .77 (19.6) .39 225P47491X 1.25 (31.8) .50 (12.7) .47 .80 (20.3) .60 (15.2) .86 (21.8) .47 225P47492Y .83 (21.1) 225P56492Y 1.25 (31.8) .67 (17.0) .56 .99 (25.1) 1.25 (31.8) .56 225P56491 Y 1.25 (31.8) .55 (14.0) .88 (22.4) .68 225P68492Y .84 (21.3) 1.14 (29.0) .68 225P68491Y 1.25 (31.8) .58 (14.7) .90 (22.9) .82 225P82491 Y 1.25 (31.8) .65 (16.5) .94 (23.9) 225P10591Y 1.25 (31.8) .72 (18.3) .98 (24.9) 1.0 1 To complete part number for specific tolerance, terminal style and lead length please refer to Ordering/Part Number Information page. 2 Shaded part numbers, when ordered as ±10% tolerance with the D3 terminal style and lead length, are Standard Stock items available through the CDE Distribution Network. For complete part number please add the D3 suffix to the above part numbers in accordance with the Ordering Information (i.e. 225P10491WD3). Other part numbers are available on special order. Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 225P, Orange Drop®, Polyester Film/Foil Capacitors 2 Type 225P Standard Sizes/Ratings 1 1 Value, µF Part Number L MAX T MAX H MAX Value, µF Part Number L MAX T MAX H MAX 400 VDC 600 VDC .001 225P10294X .80 (20.3) .25 (6.4) .55 (14.0) .55(14.0 ) .001 225P10296X .80 (20.3) .25 (6.4) .80 (20.3) .0012 225P12294X .25 (6.4) .55(14.0 ) .0012 225P12296X .80 (20.3) .25 (6.4) .55 (14.0) .0015 225P15294X .80 (20.3) .25 (6.4) .55(14.0 ) .0015 225P15296X .80 (20.3) .25 (6.4) .55 (14.0) .0018 225P18294X .80 (20.3) .25 (6.4) .55(14.0 ) .0018 225P18296X .80 (20.3) .25 (6.4) .55 (14.0) .0022 225P22294X .80 (20.3) .25 (6,4) .55(14.0 ) .80 (20.3) .25 (6.4) .55 (14.0) .0022 225P22296X .0027 225P27294X .80 (20.3) .25 (6.4) .80 (20.3) .55 (14.0) .55(14.0) .0027 225P27296X .25 (6.4) .55 (14.0) .0033 225P33294X .80 (20.3) .25 (6.4) .55(14.0 ) .0033 225P33296X .80 (20.3) .25 (6.4) .0039 225P39294X .80 (20.3) .25 (6.4) .55(14.0 ) .0039 225P39296X .80 (20.3) .25 (6.4) .55 (14.0) .0047 225P47294X .80 (20.3) .25(6.4 ) .55 (14.0) .0056 225P56294X .80 (20.3) .25 (6.4) .58(14.7 ) .0047 225P47296X .80 (20.3) .25 (6.4) .58 (14.7) .0056 225P56296X .80 (20.3) .25 (6.4) .58 (14.7) .80 (20.3) .25 (6.4) 225P68296X .80 (20.3) .25 (6.4) .58 (14.7) .0068 225P68294 X .58(14.7 ) .0068 225P82294X .80 (20.3) .25 (6.4) .58(14.7 ) 225P82296X .80 (20.3) .31 (7.9) .64 (16.3) .0082 .0082 .80 (20.3) .01 225P10394X .25 (6.4) .58 (14.7) 225P12394X .80 (20.3) .25 (6.4) 225P10396X .80 (20.3) .31 (7.9) .64 (16.3) .012 .58 (14.7) .01 .80 (20.3) .28 (7.1) .67 (17.0) .015 225P15394 X .58(14.7 ) .012 225P12396X .80 (20.3) .34 (8.6) .015 225P15396X .80 (20.3) .34 (8.6) .67 (17.0) .018 225P18394X .80 (20.3) .31 (7.9) .58 (14.7) .018 225P18396X .80 (20.3) .37 (9.4) .74 (18.8) .022 225P22394X .80 (20.3) .31 (7.9) .58(14.7 ) .027 225P27394X .80 (20.3) .34 (8.6) .65(16.5 ) 225P22396X .80 (20.3) .37 (9.4) .74 (18.8) .022 .033 225P33394X .80 (20.3) .34 (8.6) 225P27396X .80 (20.3) .44 (11.2) .77 (19.6) .65(16.5 ) .027 .80 (20.3) .44 (11.2) .77 (19.6) .039 225P39394X .80 (20.3) .41 (10.4) .65(16.5 ) .033 225P33396X .50 (12.7) .83 (21.1) .039 225P39396X .80 (20.3) .047 225P47394X .80 (20.3) .41 (10.4) .65(16.5 ) .047 225P47396X .80 (20.3) .50 (12.7) .83 (21.1) .056 225P56394X .80 (20.3) .47(11.9 ) .80 (20.3) 225P68394X .80 (20.3) .47(11.9 ) 225P56396Y 1.25(31.8 ) .47 (11.9) .82 (20.8) .068 .80 (20.3) .056 225P82394X .80 (20.3) .50 (12.7) .82 (20.8) 225P68396Y 1.25(31.8 ) .47 (11.9) .82 (20.8) .082 .068 1.25(31.8 ) .53 (13.5) .88 (22.4) .1 225P10494X .80 (20.3) .52(13.2 ) .84(21.3 ) .082 225P82396Y .56 (14.2) .91 (23.1) .1 225P10496Y 1.25(31.8 ) .12 225P12494Y 1.25(31.8 ) .44(11.2 ) .77(19.6 ) .92 (23.4) .15 225P15494Y 1.25(31.8 ) .47(11.9 ) .80 (20.3) .12 225P12496Y 1.25(31.8 ) .60 (15.2) .18 225P18494Y 1.25(31.8 ) .52(13.2 ) .84(21.3 ) 225P15496Y 1.25(31.8 ) .62 (15.7) .94 (23.9) .15 225P22494Y 1.25(31.8 ) .56(14.2 ) .89 (22.6) 225P18496Y 1.25(31.8 ) .70 (17.8) 1.02 (25.9) .22 .18 225P22496Y 1.25(31.8 ) .76 (19.3) 1.10 (27.9) .22 1.25(31.8 ) .27 225P27494Y .69 (17.5) .91 (23.1) 1.25(31.8 ) .33 225P33494Y .72 (18.3) .99 (25.1) .39 225P39494Y 1.25(31.8 ) .75(19.1 ) 1.10(27.9) .47 225P47494Y 1.25(31.8 ) .84(21.3 ) 1.14(29.0 ) To complete part number for specific tolerance, terminal style and lead length please refer to Ordering/Part Number Information page. 2 Shaded part numbers, when ordered as ±10% tolerance with the D3 terminal style and lead length, are Standard Stock items available through the CDE Distribution Network. For complete part number please add the D3 suffix to the above part numbers in accordance with the Ordering Information (i.e. 225P10491WD3). Other part numbers are available on special order. Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 225P, Orange Drop®, Polyester Film/Foil Capacitors dV/dt Specifications Maximum Pulse Rise Time (dV/dt) in Volts/µsec Cap 100V 200V 400V 600V Value (µF) 12200 14800 21000 23300 .001 .0012 11100 13500 19100 21300 .0015 9900 12100 17100 19000 17400 .0018 9100 11100 15600 15700 .0022 8200 10000 14100 9000 14200 .0027 7400 12800 .0033 6700 8200 11500 12800 .0039 6200 7500 10600 11800 .0047 5600 6800 9700 10700 9800 .0056 5100 6300 8900 4700 5700 8900 .0068 8000 .0082 4200 5200 7300 8100 .01 3800 4700 6600 7400 .012 3500 4300 6100 6700 .015 3100 3800 5400 6000 5500 .018 2900 3500 4900 .022 2600 3200 4500 5000 .027 2300 2900 4000 4500 .033 2100 2600 3700 4100 .039 1900 2400 3400 3700 .047 1800 2200 3100 3400 3100 .056 1600 2000 2800 1500 1800 2500 2800 .068 1600 2300 2300 .082 1300 .1 1200 1500 2100 2100 .12 1000 1400 1900 1900 .15 900 1200 1500 1700 .18 800 1400 1600 1400 .22 700 1000 1300 1200 .27 700 800 600 700 1000 .33 .39 600 700 1000 .47 500 600 900 .56 400 600 400 500 .68 .82 400 1.0 300 Note: dV/dt ratings based on measurements made at the junction of the wire leads and capacitor body. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Notice and Disclaimer: All product drawings, descriptions, specifcations, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confrming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specifed by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required. 4 AC