Type 350 105 ºC, Low Inductance, Radial, Aluminum Electrolytic High Frequency, Solid Aluminum Top Type 350’s solid aluminum top assures extremely low impedance. With a typical 4 to 6 nH ESL, the self reso- nant frequency is well above 100 kHz. The very low ESR assures the low impedance rating. The capacitors are fitted with three rugged welded mounting leads to provide maximum resistance. Highlights • Operates to beyond 200 kHz • Less than 10 nH ESL • Solid aluminum top RoHS Compliant Specifications Capacitance Range: 90 to 11,000 F Voltage Range: 6.3 to 100 Vdc Capacitance Tolerance: –10 +75% Operating Temperature Range: –55 ºC to +105 ºC Shelf Life: 500 hours @ +105 ºC Leakage Current: ≤0.5 √CV µA at +25 ºC Cold Impedance: –55 º multiple of +25 ºC Z ≤ 6 for 6.3 V, 3 for 10 to 50 V, 2 for 75 & 100 V Ripple Current Multipliers: Ambient Temperature 45 ºC 55 ºC 65 ºC 75 ºC 85 ºC 95 ºC 105 ºC 1.66 1.52 1.37 1.20 1.00 0.75 0.36 Frequency 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up 6.3 to 20 V 0.53 0.65 0.73 0.90 0.95 1.00 25 to 35 V 0.45 0.55 0.65 0.85 0.92 1.00 50 to 75 V 0.36 0.50 0.60 0.80 0.90 1.00 100 V 0.29 0.40 0.52 0.75 0.87 1.00 Load Life: 4,000 h @ +105 ºC at full load ∆ Capacitance ±10% ESR 150% of limit DCL 100% of limit Shelf Life: 500 h @ 105 ºC, capacitance, ESR and DCL, initial requirement Vibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h in each plane Outline Drawing T ±.015 S1 S2 +0.015 D L -0.032 CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com Type 350 105 ºC, Low Inductance, Radial, Aluminum Electrolytic Case Dimensions Case Inches Code Nominal Insulated S1 S2 T D x L D x L ±0.015 ±0.015 GE 3/4 x 1 1/8 0.775 x 1.157 0.2 0.10 0.3 GJ 3/4 x 1 5/8 0.775 x 1.657 0.2 0.10 0.3 GL 3/4 x 2 1/8 0.775 x 2.157 0.2 0.10 0.3 GP 3/4 x 2 5/8 0.775 x 2.657 0.2 0.10 0.3 HE 7/8 x 1 1/8 0.900 x 1.157 0.3 0.15 0.4 HJ 7/8 x 1 5/8 0.900 x 1.657 0.3 0.15 0.4 HL 7/8 x 2 1/8 0.900 x 2.157 0.3 0.15 0.4 HP 7/8 x 2 5/8 0.900 x 2.657 0.3 0.15 0.4 JJ 1 x 1 5/8 1.025 x 1.657 0.3 0.15 0.4 Part Numbering System 350 JP 1152 U 6R3 C Type Case Code Capacitance Tolerance Voltage Insulation 350 See table 900 = 90 µF U = –10 +75% 6R3 = 6.3 Vdc O = Bare can 161 = 160 µF T = –10 +50% 063 = 63 Vdc B = Plastic insulation with epoxy 882 = 8800 µF 100 = 100 Vdc C = Plastic insulation, no epoxy 1152 = 11500 µF Typical Performance Curves Type 350 Impedance vs. Frequency Type 350 Operating Life in Kilohours vs. Ripple Current 10 1000 45 ºC 55 ºC 1.0 100 65 ºC 3,400 µF 6.3 Vdc 75 ºC 0.1 85 ºC 11,500 µF 6.3 Vdc 105 ºC 95 ºC 10 6,100 µF 6.3 Vdc 0.01 1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 0.001 100 1000 10k 100k 1M 10M Rated Ripple-Current Multiple Frequency (Hz) CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com Impedance (Ω) Expedted Operating Life, kh Type 350 105 ºC, Low Inductance, Radial, Aluminum Electrolytic Typical Performance Curves Capacitance vs. Temperature (120 Hz) ESR vs. Temperature Characteristics (10 kHz) 110 100 ≥ 50 Vdc 100 ≥ 75 Vdc 10 6.3 Vdc 90 ≤ 40 Vdc 80 1 0.1 70 -55 40 -40 -20 0 25 60 85 105 -55 -40 -20 25 40 105 0 60 85 Temperature (ºC) Temperature (ºC) Ratings ESR Max Ω Imped. Ripple Nom ESR Max Ω Imped. Ripple Nom Cap Catalog +25 ºC Ω +25 ºC A +85 ºC Size (in) Cap Catalog +25 ºC Ω +25 ºC A +85 ºC Size (in) (µF) Part Number 120 Hz 20 kHz 100 kHz 20 kHz DxL (µF) Part Number 120 Hz 20 kHz 100 kHz 20 kHz DxL 6.3 Vdc (8.5 Vdc Surge) 10 Vdc (12 Vdc Surge) 1600 350GE162U6R3C 0.087 0.043 0.040 3.2 3/4 x 1 1/8 5600 350HL562U010C 0.030 0.015 0.018 7.3 7/8 x 2 1/8 2400 350HE242U6R3C 0.065 0.035 0.034 3.7 7/8 x 1 1/8 7300 350HP732U010C 0.024 0.013 0.016 8.7 7/8 x 2 5/8 3000 350GJ302U6R3C 0.050 0.025 0.025 4.6 3/4 x 1 5/8 7800 350JL782U010C 0.026 0.014 0.016 7.5 1 x 2 1/8 3400 350JE342U6R3C 0.058 0.031 0.031 4.0 1 x 1 1/8 10000 350JP103U010C 0.021 0.012 0.015 9.0 1 x 2 5/8 4200 350GL422U6R3C 0.035 0.018 0.019 6.6 3/4 x 2 1/8 12 Vdc (18 Vdc Surge) 4400 350HJ442U6R3C 0.037 0.020 0.022 5.6 7/8 x 1 5/8 1100 350GE112U012C 0.108 0.046 0.042 3.1 3/4 x 1 1/8 5400 350GP542U6R3C 0.029 0.015 0.017 8.0 3/4 x 2 5/8 1700 350HE172U012C 0.079 0.036 0.034 3.6 7/8 x 1 1/8 6100 350JJ612U6R3C 0.033 0.018 0.020 6.2 1 x 1 5/8 2000 350GJ202U012C 0.061 0.027 0.025 4.4 3/4 x 1 5/8 6300 350HL632U6R3C 0.027 0.015 0.018 7.5 7/8 x 2 1/8 2400 350JE242U012C 0.067 0.032 0.031 3.8 1 x 1 1/8 8300 350HP832U6R3C 0.022 0.013 0.016 8.8 7/8 x 2 5/8 2900 350GL292U012C 0.044 0.019 0.020 6.4 3/4 x 2 1/8 8800 350JL882U6R3C 0.024 0.014 0.016 8.1 1 x 2 1/8 3000 350HJ302U012C 0.045 0.021 0.022 5.4 7/8 x 1 5/8 11000 350JP113U6R3C 0.020 0.012 0.015 9.6 1 x 2 5/8 3700 350GP372U012C 0.035 0.016 0.017 7.7 3/4 x 2 5/8 7.5 Vdc (10 Vdc Surge) 4200 350JJ422U012C 0.038 0.029 0.020 6.0 1 x 1 5/8 1500 350GE152U7R5C 0.091 0.044 0.040 3.2 3/4 x 1 1/8 4400 350HL442U012C 0.032 0.016 0.018 7.2 7/8 x 2 1/8 2300 350HE232U7R5C 0.068 0.035 0.034 3.7 7/8 x 1 1/8 5800 350HP582U012C 0.026 0.013 0.016 8.6 7/8 x 2 5/8 2700 350GJ272U7R5C 0.052 0.026 0.025 4.6 3/4 x 1 5/8 6100 350JL612U012C 0.028 0.014 0.016 7.8 1 x 2 1/8 3200 350JE322U7R5C 0.059 0.031 0.030 3.9 1 x 1 1/8 8000 350JP802U012C 0.023 0.012 0.015 9.3 1 x 2 5/8 3900 350GL392U7R5C 0.037 0.018 0.019 6.6 3/4 x 2 1/8 16 Vdc (20 Vdc Surge) 4200 350HJ422U7R5C 0.039 0.021 0.022 5.6 7/8 x 1 5/8 950 350GE951U016C 0.116 0.047 0.042 3.0 3/4 x 1 1/8 5100 350GP512U7R5C 0.030 0.015 0.016 7.9 3/4 x 2 5/8 1500 350HE152U016C 0.085 0.037 0.035 3.5 7/8 x 1 1/8 5800 350JJ582U7R5C 0.034 0.018 0.019 6.1 1 x 1 5/8 1700 350GJ172U016C 0.066 0.027 0.025 4.3 3/4 x 1 5/8 6000 350HL602U7R5C 0.028 0.015 0.018 7.4 7/8 x 2 1/8 2000 350JE202U016C 0.071 0.033 0.031 3.7 1 x 1 1/8 7900 350HP792U7R5C 0.023 0.013 0.016 8.8 7/8 x 2 5/8 2500 350GL252U016C 0.047 0.020 0.020 6.3 3/4 x 2 1/8 8400 350JL842U7R3C 0.025 0.014 0.016 8.0 1 x 2 1/8 2600 350HJ262U016C 0.048 0.022 0.022 5.3 7/8 x 1 5/8 11000 350JP113U7R5C 0.020 0.012 0.014 9.5 1 x 2 5/8 3200 350GP322U016C 0.037 0.016 0.017 7.6 3/4 x 2 5/8 3600 350JJ362U016C 0.041 0.019 0.020 5.9 1 x 1 5/8 10 Vdc (12 Vdc Surge) 3800 350HL382U016C 0.034 0.016 0.018 7.1 7/8 x 2 1/8 1400 350GE142U010C 0.098 0.045 0.040 3.1 3/4 x 1 1/8 4900 350HP492U016C 0.028 0.013 0.016 8.4 7/8 x 2 5/8 2100 350HE212U010C 0.072 0.035 0.034 3.6 7/8 x 1 1/8 5200 350JL522U016C 0.029 0.014 0.016 7.7 1 x 2 1/8 2600 350GJ262U010C 0.055 0.026 0.025 4.5 3/4 x 1 5/8 6800 350JP682U016C 0.024 0.012 0.015 9.2 1 x 2 5/8 3000 350JE302U010C 0.062 0.032 0.030 3.6 1 x 1 1/8 20 Vdc (25 Vdc Surge) 3800 350GL382U010C 0.039 0.019 0.019 6.5 3/4 x 2 1/8 800 350GE801U020C 0.125 0.048 0.042 3.0 3/4 x 1 1/8 3900 350HJ392U010C 0.041 0.021 0.022 5.5 7/8 x 1 5/8 1200 350HE122U020C 0.089 0.038 0.035 3.5 7/8 x 1 1/8 4800 350GP482U010C 0.031 0.015 0.016 7.8 3/4 x 2 5/8 1500 350GJ152U020C 0.070 0.028 0.026 4.2 3/4 x 1 5/8 5400 350JJ542U010C 0.036 0.019 0.020 5.7 1 x 1 5/8 1700 350JE172U020C 0.075 0.033 0.031 3.7 1 x 1 1/8 CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com ESR - Ratio to 25 ºC Value Capacitance - % of 25 ºC Value Type 350 105 ºC, Low Inductance, Radial, Aluminum Electrolytic Ratings ESR Max Ω Imped. Ripple Nom ESR Max Ω Imped. Ripple Nom Cap Catalog +25 ºC Ω +25 ºC A +85 ºC Size (in) Cap Catalog +25 ºC Ω +25 ºC A +85 ºC Size (in) (µF) Part Number 120 Hz 20 kHz 100 kHz 20 kHz DxL (µF) Part Number 120 Hz 20 kHz 100 kHz 20 kHz DxL 50 Vdc (75 Vdc Surge) 20 Vdc (25 Vdc Surge) 250 350GE251U050C 0.195 0.057 0.043 2.6 3/4 x 1 1/8 2100 350GL212U020C 0.050 0.020 0.020 6.2 3/4 x 2 1/8 370 350HE371U050C 0.135 0.044 0.036 3.1 7/8 x 1 1/8 2200 350HJ222U020C 0.051 0.022 0.022 5.3 7/8 x 1 5/8 450 350GJ451U050C 0.110 0.033 0.026 3.8 3/4 x 1 5/8 2800 350GP282U020C 0.040 0.017 0.017 7.5 3/4 x 2 5/8 3000 350JJ302U020C 0.043 0.020 0.020 5.8 1 x 1 5/8 500 350JE501U050C 0.105 0.038 0.033 3.3 1 x 1 1/8 3200 350HL322U020C 0.036 0.016 0.018 7.0 7/8 x 2 1/8 650 350GL651U050C 0.077 0.024 0.020 5.5 3/4 x 2 1/8 4200 350HP422U020C 0.029 0.014 0.016 8.3 7/8 x 2 5/8 680 350HJ681UO5OC 0.076 0.026 0.023 4.7 7/8 x 1 5/8 800 350GP801U050C 0.060 0.019 0.018 6.7 3/4 x 2 5/8 4500 350JL452U020C 0.031 0.014 0.016 7.6 1 x 2 1/8 900 350JJ901U050C 0.060 0.022 0.022 5.2 1 x 1 5/8 5900 350JP592U020C 0.025 0.012 0.015 9.1 1 x 2 5/8 1000 350HL102U050C 0.054 0.019 0.019 6.3 7/8 x 2 1/8 25 Vdc (30 Vdc Surge) 1300 350HP132U050C 0.043 0.016 0.017 7.7 7/8 x 2 5/8 600 350GE601U025C 0.140 0.050 0.042 2.9 3/4 x 1 1/8 1300 350JL132U050C 0.043 0.017 0.018 7.0 1 x 2 1/8 900 350HE901U025C 0.100 0.039 0.035 3.4 7/8 x 1 1/8 1800 350JP182U050C 0.034 0.014 0.016 8.4 1 x 2 5/8 1100 350GJ112U025C 0.079 0.029 0.026 4.1 3/4 x 1 5/8 1300 350JE132U025C 0.082 0.034 0.031 3.6 1 x 1 1/8 60 Vdc (85 Vdc Surge) 1500 350GL152U025C 0.056 0.021 0.020 6.0 3/4 x 2 1/8 220 350GE221U060C 0.210 0.060 0.044 2.5 3/4 x 1 1/8 1600 350HJ162U025C 0.057 0.023 0.022 5.1 7/8 x 1 5/8 330 350HE331U060C 0.145 0.045 0.036 3.0 7/8 x 1 1/8 2000 350GP202U025C 0.044 0.017 0.017 7.3 3/4 x 2 5/8 350 350GJ351U060C 0.120 0.034 0.027 3.7 3/4 x 1 5/8 460 350JE461U060C 0.114 0.039 0.034 3.2 1 x 1 1/8 2300 350HL232U025C 0.040 0.017 0.018 6.8 7/8 x 2 1/8 500 350GL501U060C 0.082 0.024 0.020 5.4 3/4 x 2 1/8 2300 350JJ232U025C 0.047 0.020 0.021 5.6 1 x 1 5/8 560 350HJ561U060C 0.082 0.027 0.023 4.6 7/8 x 1 5/8 3100 350HP312U025C 0.032 0.014 0.016 8.2 7/8 x 2 5/8 75 Vdc (95 Vdc Surge) 3300 350JL332U025C 0.034 0.015 0.017 74.0 1 x 2 1/8 150 350GE151U075C 0.640 0.240 0.240 1.7 3/4 x 1 1/8 4300 350JP432U025C 0.027 0.013 0.016 8.9 1 x 2 5/8 30 Vdc (40 Vdc Surge) 230 350HE231U075C 0.400 0.145 0.145 2.2 7/8 x 1 1/8 450 350GE451U030C 0.155 0.052 0.043 2.8 3/4 x 1 1/8 250 350GJ251U075C 0.320 0.135 0.135 2.6 3/4 x 1 5/8 700 350HE701U030C 0.110 0.041 0.035 3.3 7/8 x 1 1/8 320 350JE321U075C 0.280 0.110 0.110 2.5 1 x 1 1/8 800 350GJ801U030C 0.088 0.030 0.026 4.0 3/4 x 1 5/8 340 350GL341U075C 0.215 0.100 0.100 3.9 3/4 x 2 1/8 390 350HJ391U075C 0.210 0.090 0.090 3.5 7/8 x 1 5/8 950 350JE951U030C 0.089 0.036 0.032 3.4 1 x 1 1/8 460 350GP461U075C 0.160 0.074 0.074 5.0 3/4 x 2 5/8 1100 350GL112U030C 0.062 0.022 0.02 5.8 3/4 x 2 1/8 530 350HL531U075C 0.140 0.067 0.067 5.0 7/8 x 2 1/8 1200 350HJ122U030C 0.062 0.024 0.023 5.0 7/8 x 1 5/8 540 350JJ541U075C 0.155 0.068 0.068 4.0 1 x 1 5/8 1500 350GP152U030C 0.048 0.018 0.017 7.1 3/4 x 2 5/8 710 350HP711U075C 0.106 0.050 0.050 6.4 7/8 x 2 5/8 1700 350JJ172U030C 0.050 0.021 0.021 5.5 1 x 1 5/8 740 350JL741U075C 0.105 0.051 0.051 5.6 1 x 2 1/8 1800 350HL182U030C 0.044 0.017 0.018 6.6 7/8 x 2 1/8 2300 350HP232U030C 0.035 0.015 0.016 8.0 7/8 x 2 5/8 1000 350JP101U075C 0.078 0.038 0.038 7.0 1 x 2 5/8 2500 350JL252U030C 0.036 0.016 0.017 7.2 1 x 2 1/8 100 Vdc (125 Vdc Surge) 3200 350JP322U030C 0.029 0.013 0.016 8.6 1 x 2 5/8 90 350GE090U100C 0.800 0.240 0.240 1.7 3/4 x 1 1/8 140 350HE141U100C 0.500 0.160 0.160 2.2 7/8 x 1 1/8 40 Vdc (50 Vdc Surge) 160 350GJ161U100C 0.440 0.142 0.142 2.3 3/4 x 1 5/8 320 350GE321U040C 0.176 0.054 0.043 2.7 3/4 x 1 1/8 200 350JE201U100C 0.400 0.130 0.130 2.4 1 x 1 1/8 500 350HE501U040C 0.123 0.042 0.035 3.2 7/8 x 1 1/8 210 350GL211U100C 0.295 0.105 0.105 3.5 3/4 x 2 1/8 600 350GJ601U040C 0.100 0.031 0.026 3.9 3/4 x 1 5/8 240 350HJ241U100C 0.290 0.095 0.095 3.2 7/8 x 1 5/8 700 350JE701U040C 0.099 0.037 0.032 3.4 1 x 1 1/8 290 350GP291U100C 0.220 0.078 0.078 4.6 3/4 x 2 5/8 850 350GL851U040C 0.070 0.023 0.02 5.7 3/4 x 2 1/8 900 350HJ901U040C 0.070 0.025 0.023 4.9 7/8 x 1 5/8 330 350HL331U100C 0.195 0.071 0.071 4.5 7/8 x 2 1/8 1100 350GP112U040C 0.055 0.018 0.017 6.9 3/4 x 2 5/8 340 350JJ341U100C 0.210 0.071 0.071 3.7 1 x 1 5/8 1200 350JJ122U040C 0.056 0.022 0.021 5.4 1 x 1 5/8 450 350HP451U100C 0.145 0.053 0.053 5.8 7/8 x 2 5/8 1300 350HL132U040C 0.049 0.018 0.018 6.5 7/8 x 2 1/8 460 350JL461U100C 0.140 0.053 0.040 6.7 1 x 2 1/8 620 350JP621U100C 0.105 0.040 0.040 6.7 1 x 2 5/8 1700 350HP172U040C 0.039 0.015 0.016 7.9 7/8 x 2 5/8 1800 350JL182U040C 0.040 0.016 0.017 7.1 1 x 2 1/8 2300 350JP232U040C 0.032 0.013 0.016 8.5 1 x 2 5/8 CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com Type 350 105 ºC, Low Inductance, Radial, Aluminum Electrolytic Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required. CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com