CORNELL DUBILIER AVEZ476M10D16T-F

Type AVEZ –55 °C to +105 °C Low Impedance SMT Aluminum Electrolytic Capacitors For Filtering, Bypassing and Power Supply Decoupling Type AVEZ Capacitors are rated for 1000 hours at 105 ºC with low impedance characteristics. They are ideal for high density PC board packaging. The Type AVEZ offers a low in-place-cost for a high quality performer. The vertical cylindrical cases facilitate automatic mounting and reflow soldering into the same footprint of like-rated tantalum capacitors except without the need for voltage derating. Type AVEZ is RoHS compliant. Highlights • +105 °C, Up to 1000 Hours Load Life • Capacitance Range: 1.0 µF to 220 µF • Voltage Range: 6.3 Vdc to 50 Vdc Specifications Operating Temperature: –55 °C to +105 °C Rated Voltage: 6.3, 10, 16, 25, 35, 50 Vdc Capacitance: 1.0 µF to 220 µF Capacitance Tolerance: ±20% @ 120 Hz and +20 °C Leakage Current: I = 0.01 CV or 3 (µA) whichever is greater after 2 minutes C = rated capacitance in µF, V = rated DC working voltage Ripple Current Multiplier: Freq. (Hz) 50, 60 120 1 k 10 k up Vdc 6.3 ~ 50 0.64 0.80 0.93 1.00 Dissipation Factor: Rated Voltage 6.3 10 16 25 35 50 (Tan d at 120 Hz, 20 ºC) Tan δ Max 0.28 0.24 0.20 0.16 0.14 0.12 Rated Voltage 6.3 10 16 25 35 50 Low Temperature Z(–25 ºC) / Z(+20 ºC) 4 3 2 2 2 2 Characteristic (at 120 Hz): Impedance Ratio Z(–40 ºC) / Z(+20 ºC) 8 5 4 3 3 3 Test Time 1,000 Hours Load Life Test: Capacitance Change Within ±25% of initial value Dissipation Factor Less than 200% of specified value Complies with the EU Directive 2002/95/EC requirement restricting Leakage Current Within specified value the use of Lead (Pb), Mercury (Hg), * The above specifications shall be satisfied when the Cadmium (Cd), Hexavalent chromium capacitors are restored to 20 ºC after the rated voltage is (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl applied for 1,000 hrs at 105 ºC Ethers (PBDE). Shelf LifeTest: Test time: 1000 hours; test limits are the same as those for life test. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVEZ –55 °C to +105 °C Low Impedance SMT Aluminum Electrolytic Capacitors Outline Drawing, Case Code & Dimensions Table Case Ø D L A B C W P ±0.2 Code (mm) (mm) (mm) (mm) (mm) (mm) (mm) - + B 4.0 5.3 ±0.2 4.3 4.3 2.0 0.5 to 0.8 1.0 C 5.0 5.3 ±0.2 5.3 5.3 2.3 0.5 to 0.8 1.5 D 6.3 5.3 ±0.2 6.6 6.6 2.7 0.5 to 0.8 2.0 X 6.3 7.7 ±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 Part Numbering System AVEZ 106 M 25 C 12T –F Type Capacitance Capacitance Voltage Code Case Packaging Code RoHS Tolerance Code Compliant AVEZ 105 = 1.0 µF M = ±20% 06 = 6.3 Vdc 25 = 25 Vdc See 12 = Carrier Tape 106 = 10.0 µF 10 = 10 Vdc 35 = 35 Vdc Table Width (mm) 107 = 100.0 µF 16 = 16 Vdc 50 = 50 Vdc T = Tape & Reel Ratings Max Max Max Max Catalog DCL DF Impedance Ripple Current Case Size Quantity Cap Part Number 2 min. 120 Hz 20 ºC 100 kHz 20 ºC 100 kHz 105 °C Code D x L per Reel (µF) (µA) (ohms) (mA) (mm) (each) 6.3 Vdc ( 8 Vdc Surge) 22 AVEZ226M06B12T-F 3.0 0.28 3.20 65 B 4 x 5.3 2000 33 AVEZ336M06C12T-F 3.0 0.28 1.50 110 C 5 x 5.3 1000 47 AVEZ476M06C12T-F 3.0 0.28 1.50 110 C 5 x 5.3 1000 100 AVEZ107M06D16T-F 6.3 0.28 0.85 170 D 6.3 x 5.3 1000 150 AVEZ157M06X16T-F 9.5 0.28 0.50 255 X 6.3 x 7.7 1000 220 AVEZ227M06X16T-F 13.9 0.28 0.50 255 X 6.3 x 7.7 1000 10 Vdc ( 13 Vdc Surge) 10 AVEZ106M10B12T-F 3.0 0.24 3.20 65 B 4 x 5.3 2000 22 AVEZ226M10C12T-F 3.0 0.24 1.50 110 C 5 x 5.3 1000 33 AVEZ336M10C12T-F 3.0 0.24 1.50 110 C 5 x 5.3 1000 47 AVEZ476M10D16T-F 3.0 0.24 0.85 170 D 6.3 x 5.3 1000 100 AVEZ107M10D16T-F 6.3 0.24 0.85 170 D 6.3 x 5.3 1000 150 AVEZ157M10X16T-F 9.5 0.24 0.50 255 X 6.3 x 7.7 1000 220 AVEZ227M10X16T-F 13.9 0.24 0.50 255 X 6.3 x 7.7 1000 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVEZ –55 °C to +105 °C Low Impedance SMT Aluminum Electrolytic Capacitors Max Max Max Max Catalog DCL DF Impedance Ripple Current Case Size Quantity Cap Part Number 2 min. 120 Hz 20 ºC 100 kHz 20 ºC 100 kHz 105 °C Code D x L per Reel (µF) (µA) (ohms) (mA) (mm) (each) 16 Vdc ( 13 Vdc Surge) 10 AVEZ106M16B12T-F 3.0 0.2 3.20 65 B 4 x 5.3 2000 22 AVEZ226M16C12T-F 3.0 0.2 1.50 110 C 5 x 5.3 1000 33 AVEZ336M16D16T-F 3.0 0.2 0.85 170 D 6.3 x 5.3 1000 47 AVEZ476M16D16T-F 3.0 0.2 0.85 170 D 6.3 x 5.3 1000 100 AVEZ107M16D16T-F 6.3 0.2 0.85 170 D 6.3 x 5.3 1000 150 AVEZ157M16X16T-F 9.5 0.2 0.50 255 X 6.3 x 7.7 1000 220 AVEZ227M16X16T-F 13.9 0.2 0.50 255 X 6.3 x 7.7 1000 25 Vdc ( 31 Vdc Surge) 4.7 AVEZ475M25B12T-F 3.0 0.16 3.20 65 B 4 x 5.3 2000 10 AVEZ106M25C12T-F 3.0 0.16 1.50 110 C 5 x 5.3 1000 22 AVEZ226M25D16T-F 3.0 0.16 0.85 170 D 6.3 x 5.3 1000 33 AVEZ336M25D16T-F 3.0 0.16 0.85 170 D 6.3 x 5.3 1000 47 AVEZ476M25D16T-F 3.0 0.16 0.85 170 D 6.3 x 5.3 1000 100 AVEZ107M25X16T-F 6.3 0.16 0.5 255 X 6.3 x 7.7 1000 35 Vdc ( 44 Vdc Surge) 4.7 AVEZ475M35B12T-F 3.0 0.14 3.20 65 B 4 x 5.3 2000 10 AVEZ106M35C12T-F 3.0 0.14 1.50 110 C 5 x 5.3 1000 22 AVEZ226M35D16T-F 3.0 0.14 0.85 170 D 6.3 x 5.3 1000 33 AVEZ336M35D16T-F 3.0 0.14 0.85 170 D 6.3 x 5.3 1000 47 AVEZ476M35X16T-F 3.0 0.14 0.50 255 X 6.3 x 7.7 1000 50 Vdc ( 63 Vdc Surge) 1.0 AVEZ105M50B12T-F 3.0 0.12 5.0 30 B 4 x 5.3 2000 2.2 AVEZ225M50B12T-F 3.0 0.12 5.0 30 B 4 x 5.3 2000 3.3 AVEZ335M50B12T-F 3.0 0.12 5.0 30 B 4 x 5.3 2000 4.7 AVEZ475M50C12T-F 3.0 0.12 3.0 50 C 5 x 5.3 1000 10 AVEZ106M50D16T-F 3.0 0.12 2.0 70 D 6.3 x 5.3 1000 22 AVEZ226M50D16T-F 3.0 0.12 3.0 70 D 6.3 x 5.3 1000 33 AVEZ336M50X16T-F 3.0 0.12 1.0 170 X 6.3 x 7.7 1000 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVEZ –55 °C to +105 °C Low Impedance SMT Aluminum Electrolytic Capacitors Recommended Land Patterns by case size for AVEZ series B A B C Land Dimensions (mm) Case Code Case Size C B A B 4x5.3 1.6 2.6 1 C 5x5.3 1.6 3 1.4 D 6.3x5.3 1.6 3.5 1.9 X 6.3x7.7 1.6 3.5 1.9 Recommended Soldering Methods Recommended Reflow Soldering Profile: Parts should be subjected to just one reflow soldering process. Soldering with a solder iron should be performed with a maximum soldering iron tip temperature of 350±5°C for 3 to 4 seconds. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com Type AVEZ –55 °C to +105 °C Low Impedance SMT Aluminum Electrolytic Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com