CORNELL DUBILIER AVGA336M16D16T-F

Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors For Filtering, Bypassing and Power Supply Decoupling with High Capacitance Requirements Type AVGA Capacitors are rated for 2000 hours at 105 ºC and up to 63 Vdc. They are ideal for high density PC board packaging. The Type AVGA ofers a low in-place-cost for a high quality performer. The vertical cylindrical cases facilitate automatic mounting and refow soldering into the same footprint of like-rated tantalum capacitors except without the need for voltage derating. Type AVGA is RoHS compliant. Highlights • +105 °C, Up to 2000 Hours Load Life • Capacitance Range: 0.1 µF to 4700 µF • Voltage Range: 6.3 Vdc to 63 Vdc Specifcations Operating Temperature: –40 °C to +105 °C Rated Voltage: 6.3, 10, 16, 25, 35, 50, 63 Vdc Capacitance: 0.1µF to 4700 µF Capacitance Tolerance: ±20% @ 120 Hz and +20 °C Leakage Current (at 20 ºC): 4 – 10 Ø I = 0.01 CV or 3 µA, whichever is greater, after 2 minutes at +20 ºC 6.3 – 63 V 12.5 ~ 16 Ø I = 0.03 CV or 4 µA, whichever is greater, after 2 minutes at +20 ºC I = leakage current C = rated capacitance in µF V = rated DC Working voltage in V Dissipation Factor: Rated Voltage 6.3 10 16 25 35 50 63 ) (Tan d at 120 Hz, 20 ºC 4 ~ 10 Ø 0.45 0.35 0.28 0.18 0.16 0.14 0.12 12.5 ~ 16 Ø 0.4 0.38 0.34 0.26 0.22 0.18 0.14 When the capacitance exceeds 1000 µF, .02 shall be added for every 1000 µF increase Low Temperature Characteristic (at 120 Hz): Rated Voltage 6.3 10 16 25 35 50 63 Z(–25 ºC) 4 ~ 10 Ø 4 3 2 2 2 2 2 /Z(+20 ºC) 12.5 ~ 16 Ø 5 4 3 2 2 2 2 Impedance Ratio Z(–40 ºC) 4 ~ 10 Ø 12 8 6 4 3 3 3 /Z(+20 ºC) 12.5 ~ 16 Ø 10 8 6 4 3 3 3 Impedance ratio shall not exceed the values given in the table above. Load Life Test: Test Time 2,000 Hours 4 ~ 6.3 Ø : Within ±25 % of initial value Capacitance Change 8 ~ 16 Ø : Within ±20 % of initial value Dissipation Factor < 200% of specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for 2,000 hrs at 105 ºC Shelf LifeTest: Test time: 1000 hours; other items are the same as those for life test. Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Outline Drawings, Case Code & Dimensions Table - + Case Ø D L A B C W P ±0.2 Fig. Code (mm) (mm) (mm) (mm) (mm) (mm) (mm) No. B 4.0 5.7 ±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0 1 C 5.0 5.7 ±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 1 D 6.3 5.7 ±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1 X 6.3 7.7 ±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1 F 8.0 10 ±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1 G 10.0 10 ±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 Q 10.0 10.3 ±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 - H 12.5 13.5 ±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 + L 12.5 16 ±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 P 16.0 16.5 ±0.5 16.3 16.3 5.8 1.1 to 1.4 6.0 2 Part Numbering System AVGA 227 M 25 F 24T –F Type Capacitance Capacitance Voltage Code Case Packaging Code RoHs Tolerance Code Compliant AVGA 104 = .1 µF M = ±20% 06 = 6.3 Vdc See 24 = Carrier tap 475 = 4.7 µF 10 = 10 Vdc Table Width (mm) 106 = 10.0 µF 16 = 16 Vdc T = Tape & Reel 227 = 220 µF 25 = 25 Vdc Y = Tray Pack (available for H,L, 478 = 4700 µF 35 = 35 Vdc & P case codes) 50 = 50 Vdc 63 = 63 Vdc CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Ratings Max. Catalog Max. DF Max. ESR Ripple Current Case Size Quantity Cap Part Number Max. DCL @ 120 Hz @ 120 Hz/20 ºC @ 120 Hz/105 ºC Code D x L Per Reel (µF) (µA) (ohms) (ma) (mm) (ea) 6.3 Vdc (8 Vdc Surge) 47 AVGA476M06C12T-F 3.0 0.45 15.87 30 C 5x5.7 1000 100 AVGA107M06D16T-F 6.3 0.45 7.46 69 D 6.3x5.7 1000 220 AVGA227M06X16T-F 14 0.45 3.39 120 X 6.3x7.7 1000 330 AVGA337M06F24T-F 21 0.45 2.26 290 F 8x10 500 470 AVGA477M06F24T-F 30 0.45 1.59 320 F 8x10 500 1000 AVGA108M06G24T-F 63 0.45 0.75 410 G 10x10 500 2200 AVGA228M06H32T-F 416 0.42 0.32 680 H 12.5x13.5 200 3300 AVGA338M06L32T-F 624 0.44 0.22 850 L 12.5x16 150 4700 AVGA478M06P44T-F 888 0.46 0.16 1000 P 16x16.5 125 10 Vdc (13 Vdc Surge) 33 AVGA336M10C12T-F 3.3 0.35 17.58 30 C 5x5.7 1000 47 AVGA476M10D16T-F 4.7 0.35 12.35 48 D 6.3x5.7 1000 100 AVGA107M10D16T-F 10 0.35 5.80 69 D 6.3x5.7 1000 220 AVGA227M10X16T-F 22 0.35 2.64 120 X 6.3x7.7 1000 330 AVGA337M10F24T-F 33 0.35 1.76 290 F 8x10 500 470 AVGA477M10F24T-F 47 0.35 1.23 320 F 8x10 500 470 AVGA477M10G24T-F 47 0.35 1.23 410 G 10x10 500 1000 AVGA108M10Q24T-F 100 0.35 0.58 410 Q 10x10.3 500 2200 AVGA228M10L32T-F 660 0.40 0.30 750 L 12.5x16 150 3300 AVGA338M10P44T-F 990 0.42 0.21 1000 P 16x16.5 125 4700 AVGA478M10P44T-F 1410 0.44 0.16 1000 P 16x16.5 125 16 Vdc (20 Vdc Surge) 10 AVGA106M16B12T-F 3.0 0.28 46.42 17 B 4x5.7 2000 22 AVGA226M16C12T-F 3.5 0.28 21.10 30 C 5x5.7 1000 33 AVGA336M16D16T-F 5.3 0.28 14.07 45 D 6.3x5.7 1000 47 AVGA476M16D16T-F 7.5 0.28 9.88 48 D 6.3x5.7 1000 100 AVGA107M16D16T-F 16 0.28 4.64 69 D 6.3x5.7 1000 220 AVGA227M16X16T-F 35 0.28 2.11 120 X 6.3x7.7 1000 330 AVGA337M16F24T-F 53 0.28 1.41 290 F 8x10 500 470 AVGA477M16F24T-F 75 0.28 0.99 320 F 8x10 500 1000 AVGA108M16H32T-F 480 0.34 0.56 550 H 12.5x13.5 200 2200 AVGA228M16P44T-F 1056 0.36 0.27 950 P 16x16.5 125 3300 AVGA338M16P44T-F 1584 0.38 0.19 950 P 16x16.5 125 25 Vdc (32 Vdc Surge) 4.7 AVGA475M25B12T-F 3.0 0.18 63.49 13 B 4x5.7 2000 10 AVGA106M25C12T-F 3.0 0.18 29.84 23 C 5x5.7 1000 22 AVGA226M25D16T-F 5.5 0.18 13.56 38 D 6.3x5.7 1000 33 AVGA336M25D16T-F 8.3 0.18 9.04 50 D 6.3x5.7 1000 47 AVGA476M25D16T-F 12 0.18 6.35 60 D 6.3x5.7 1000 100 AVGA107M25X16T-F 25 0.18 2.98 100 X 6.3x7.7 1000 220 AVGA227M25F24T-F 55 0.18 1.36 320 F 8x10 500 330 AVGA337M25G24T-F 83 0.18 0.90 375 G 10x10 500 470 AVGA477M25G24T-F 118 0.18 0.64 410 G 10x10 500 1000 AVGA108M25L32T-F 750 0.26 0.43 550 L 12.5x16 150 2200 AVGA228M25P44T-F 1650 0.28 0.21 820 P 16x16.5 125 Contact factory for tray pack (Y) quantities CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Max. Catalog Max. DF Max. ESR Ripple Current Case Size Quantity Cap Part Number Max. DCL @ 120 Hz @ 120 Hz/20 ºC @ 120 Hz/105 ºC Code D x L Per Reel (µF) (µA) (ohms) (ma) (mm) (ea) 35 Vdc (44 Vdc Surge) 4.7 AVGA475M35B12T-F 3.0 0.16 56.44 16 B 4x5.7 2000 10 AVGA106M35C12T-F 3.5 0.16 26.53 27 C 5x5.7 1000 22 AVGA226M35D16T-F 7.7 0.16 12.06 44 D 6.3x5.7 1000 33 AVGA336M35D16T-F 12 0.16 8.04 54 D 6.3x5.7 1000 47 AVGA476M35X16T-F 16 0.16 5.64 80 X 6.3x7.7 1000 100 AVGA107M35F24T-F 35 0.16 2.65 320 F 8x10 500 220 AVGA227M35G24T-F 77 0.16 1.21 375 G 10x10 500 330 AVGA337M35Q24T-F 116 0.16 0.80 410 Q 10x10.3 500 470 AVGA477M35H32T-F 494 0.22 0.78 520 H 12.5x13.5 200 1000 AVGA108M35P44T-F 1050 0.22 0.36 750 P 16x16.5 125 50 Vdc (63 Vdc Surge) 0.1 AVGA104M50B12T-F 3.0 0.14 2320.96 2 B 4x5.7 2000 0.22 AVGA224M50B12T-F 3.0 0.14 1054.98 3 B 4x5.7 2000 0.33 AVGA334M50B12T-F 3.0 0.14 703.32 4 B 4x5.7 2000 0.47 AVGA474M50B12T-F 3.0 0.14 493.82 5 B 4x5.7 2000 1.0 AVGA105M50B12T-F 3.0 0.14 232.10 10 B 4x5.7 2000 2.2 AVGA225M50B12T-F 3.0 0.14 105.50 16 B 4x5.7 2000 3.3 AVGA335M50B12T-F 3.0 0.14 70.33 18 B 4x5.7 2000 4.7 AVGA475M50C12T-F 3.0 0.14 49.38 20 C 5x5.7 1000 10 AVGA106M50D16T-F 5.0 0.14 23.21 32 D 6.3x5.7 1000 22 AVGA226M50D16T-F 11 0.14 10.55 47 D 6.3x5.7 1000 33 AVGA336M50X16T-F 17 0.14 7.03 65 X 6.3x7.7 1000 47 AVGA476M50X16T-F 24 0.14 4.94 80 X 6.3x7.7 1000 100 AVGA107M50F24T-F 50 0.14 2.32 230 F 8x10 500 100 AVGA107M50G24T-F 50 0.14 2.32 375 G 10x10 500 220 AVGA227M50Q24T-F 110 0.14 1.06 375 Q 10x10.3 500 330 AVGA337M50H32T-F 165 0.18 0.90 500 H 12.5x13.5 200 470 AVGA477M50L32T-F 235 0.18 0.64 550 L 12.5x16 150 63 Vdc (79 Vdc Surge) 0.47 AVGA474M63B12T-F 3.0 0.12 423.27 5 B 4x5.7 2000 1 AVGA105M63B12T-F 3.0 0.12 198.94 8 B 4x5.7 2000 2.2 AVGA225M63B12T-F 3.0 0.12 90.43 12 B 4x5.7 2000 3.3 AVGA335M63C12T-F 3.0 0.12 60.28 17 C 5x5.7 1000 4.7 AVGA475M63D16T-F 3.0 0.12 42.33 22 D 6.3x5.7 1000 10 AVGA106M63D16T-F 6.3 0.12 19.89 32 D 6.3x5.7 1000 22 AVGA226M63X16T-F 14 0.12 9.04 58 X 6.3x7.7 1000 33 AVGA336M63F24T-F 21 0.12 6.03 140 F 8x10 500 47 AVGA476M63F24T-F 30 0.12 4.23 170 F 8x10 500 47 AVGA476M63G24T-F 30 0.12 4.23 310 G 10x10 500 100 AVGA107M63Q24T-F 63 0.12 1.99 310 Q 10x10.3 500 220 AVGA227M63H32T-F 416 0.14 1.06 470 H 12.5x13.5 200 330 AVGA337M63P44T-F 624 0.14 0.70 700 P 16x16.5 125 470 AVGA477M63P44T-F 888 0.14 0.49 700 P 16x16.5 125 Contact factory for tray pack (Y) quantities CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Recommended Land Patterns by case size for AVGA series B A B C Land Dimensions (mm) Case Case Code Size C B A B 4x5.7 1.6 2.6 1 C 5x5.7 1.6 3 1.4 D 6.3x5.7 1.6 3.5 1.9 X 6.3x7.7 1.6 3.5 1.9 F 8x10 2.5 3.5 3 G 10x10 2.5 4 4 Q 10x10.3 2.5 4 4 H 12.5x13.5 4 7.5 7 L 12.5x16 4 7.5 7 P 16x16.5 6 8.5 9.5 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Recommended Soldering Methods Recommended Reflow Soldering Profile: For case diameters 4 thru 6.3 mm with voltage ratings of 6.3 to 50Vdc For case diameters 4 thru 6.3 mm with a volt- age rating of 63 Vdc For case diameters 8 to 16 mm Case sizes 4 thru 6.3 mm dia. (4 to 50V) should be subjected to just one reflow soldering process. The 8 thru 16 mm dia. case sizes(and 4 thru 6.3 mm dia. at 63V) should be subjected to a maximum of two reflow soldering processes. Soldering with a solder iron should be performed with a maximum soldering iron tip temperature of 350±5°C for 3 to 4 seconds. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type AVGA –40 °C to +105 °C High Capacitance SMT Aluminum Electrolytic Capacitors Notice and Disclaimer: All product drawings, descriptions, specifcations, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confrming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specifed by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com OBSOLETE