CORNELL DUBILIER CM04CD010DO3

Ordering Information Radial-Leaded Dipped Mica Capacitors Ordering Information Order by complete part number as below. For other options, write your requirements on your purchase order or request for quotation. Note: RoHS compliant not available for CD6, CD7 or MIL-C5 parts. Radial-Leaded Silvered Mica Capacitors (Except D7, D10*) CD15 C D 100 J O 3 F Series Characteristic Voltage Capacitance Capacitance Temperature Vibration Blank = Code (Vdc) (pF) Tolerance Range Grade Not Specified F= RoHS Compliant Y = 50 Vdc F = 1000 Vdc 010 = 1 pF O = –55 ºC to +125 ºC A = 100 Vdc H = 1500 Vdc (1.5) = 1.5 pF P = –55 ºC to +150 ºC Vibration Grade C = 300 Vdc J = 2000 Vdc 361 = 360 pF D = 500 Vdc K = 2500 Vdc 122 = 1200 pF Vibration Characteristics No. MIL-STD-202 Condition (Hz) Temp. Coeff. Capacitance Standard Cap. 1 Method 201 10 to 55 Code ppm/ ºC Drift Range 3 Method 204 10 to 2,000 C –200 to +200 ±(0.5% +0.1pF) 1–18 pF Condition D E –20 to +100 ±(0.1% +0.1 pF) 20–82 pF Standard vibration grade is 3, the more F 0 to +70 ±(0.05% +0.1 pF) 91 pF and up severe requirement Capacitance Tolerance Tol. Capacitance Options Available Code Tolerance Range ♦ Non-flammable units per IEC 695-2-2 are available for C ±1 pF 1– 9 pF standard dipped capacitors. Specify IEC 695-2-2 on D ±1⁄2 pF 1–99 pF your order. E ±1⁄2 % 100 pF and up ♦ Tape and reeling, specify per next page. F ±1 % 50 pF and up ♦ “P” temperature range available for CD10, G ±2 % 25 pF and up CD15, CD19, CD30, CD42, CDA15 H ±3 % 18 pF and up ♦ For MIL-C-5 capacitors, see below. J ±5 % 10 pF and up Standard tolerance is ±½ pF for less than 10 pF and ±5% for 10 pF and up MIL-C-5 Capacitors Capacitors are available marked and manufactured to the replacing the CDE type with the MIL-C-5 Style Number requirements of standard MIL-C-5. To order the MIL- using the table below. Example: Change CD15ED470J03 C-5 part number, change the Catalog Number by to CM05ED470J03. The following ratings have no MIL-C-5 equivalents: CDE MIL-C-5 Type CD10: 2, 3, 4, 50, 250 and 400 pF Type Number Style Number CD10 CM04 CM09 Type CD15: 2, 3, 4, 50, 250, 430 and higher pF CD15 CM05 CM10 CD19 CM06 CM11 Type CD19: 390 and lower pF, 2,500 pF, and 5000 and higher pF CD30 CM07 CM12 Type CD30: 5,000 and lower pF, 33,000 and higheer pF * Order Type D7 and D10 using the Catalog Numbers shown in the ratings tables. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com dering InfMica Capacitors Ordering Information Dipped Mica Capacitors for Auto Insertion For tape and reel or ammo-packed packaging, specify T max. on the order. L max. For high-volume auto insertion applications, the best- H max. value choice is Type CDA15. Reel packing is also avail- .078 able for Types CD4, CD5, CD10, CD15, CD17, .250 ± .051 CD19, CM04, and CM05. h ± .020 .354 + .030 – .020 Reel Packing with .200″ lead spacing is available for .709 + .039 – .020 Types CD5, and CD10. To order .200″ lead spacing, change the Catalog Number by inserting the letter .202 ± .028 “A” in the CDE Type. Example: Type CD5 ca- S ± .031 .157 ± .012 .035 max. .500 ± .012 pacitors, reel packed with .200" lead spacing, is desig- nated as Type CDA5. See the table below for available reel-packed types, Lead Configurations lead configurations, lead spacing, lead material, pieces per reel and pieces per ammo packs. Packaging will be in accordance with EIA-468. Dimen- sion h will be 16mm for formed leads or 18mm for straight leads. 20mm is available on special request. AB C Specify reel or ammo on your purchase order. Range of Range of Type Lead Lead Lead Capacitance Pieces per Pieces per Number Spacing Configuration Material Range Reel Ammo Pack CD4 .100 A CCS 1– 560 pF 1000–2500 1000–2000 561– 780 pF 1000–2000 1000–1500 781–1500 pF 1000–1500 1000 CD5 .120 A CCS 1–158 pF 1000–2500 1000–2000 159–256 pF 1000–2000 1000–1500 CDA5 .200 B CCS 257–400 pF 1000–1500 1000 D10 1– 265 pF 1000–2500 1000–2000 CD10/CM04 .141 A CCS 266– 470 pF 1000–2000 1000–1500 CDA10 .200 C CCS 471–1200 pF 1000–1500 1000 CD15/CM05 .234 A CCS 1– 330 pF 1000–2500 1000–2000 CD17 331– 470 pF 1000–2000 1000–1500 471–1500 pF 1000–1500 1000 CD16 .234 A CCS 1– 330 pF 1000–2500 1000–2000 CDV16 331– 470 pF 1000–2000 1000–1500 471–1500 pF 1000–1500 1000 1501–2000 pF 800 600 > 2000 pF 500 400 CDA15 .200 A, C Copper 1– 330 pF 1000–2500 1000–2000 CDA17 331– 470 pF 1000–2000 1000–1500 471–1500 pF 1000–1500 1000 CD19 .344 A CCS 10-1000 pF 1000 800 1001-1500 pF 800 800 1501–3000 pF 500 400 3001-5000 pF 400 400 CCS = copper-clad steel CDA indicates .200 lead spacing for a bulk part. If you want it configured for auto insertion, it must be so noted on the order (i.e. tape/reel or ammo pack the referenced parts) Radial-Leaded,Orormation,