CORNELL DUBILIER DSF050J184

H max20 min Type DSF Polyester Capacitors ked MetallizedStac Radial Leads Subminiature Size Type DSF film capacitors are made with stacked metallized polyester, resulting in high volumetric efficiency and a very economical solution for general purpose DC applications. Ideally suited for blocking, by-pass, coupling, decoupling, and filtering circuits. Specifically designed for applications where high density insertion of components is required. Ammo box style or reel taping available. Voltage Range: 50-100 Vdc (63 Vdc Optional) Dielectric Strength: Rated Vdc x 150 %, 60 sec. Capacitance Range: .010-2.2 μF Dissipation Factor: 1% max (25°C, 1 kHz) Insulation Resistance: C≤0.33μF : 3000MΩ min. Capacitance Tolerance: ± 5% (J) standard . Operating Temperature Range: –40 to + 85°C C>0.33μF : 1000MΩ μF min. Life Test: 1000 h @ 85 °C, 125% rated voltage Full rated voltage at 85° C-Derate linearly to 50% - rated voltage at 105°C Full rated voltage at 85°C-Derate linearly to 50% - rated voltage at 125°C Lead Spacing L S dV/dt volts per microsecond, max. <10 5.0 ≥10 7.5 50 32 - 37 12 ± 100 55 43 S± Ratings and Dimensions RoHS Compliant Cap. Catalog T H L S Cap. Catalog T H L S (µF ) Part Number Inches(mm) Inches(mm) Inches(mm) Inches(mm) (µF ) Part Number Inches(mm) In. (mm) Inches(mm) Inches(mm) 50 Vdc 1.200 DSF050J125 0.256 (6.5) 0.394 (10.0) 0.402 (10.2) 0.295 (7.5) 0.010 DSF050J103 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 1.500 DSF050J155 0.283 (7.2) 0.394 (10.0) 0.402 (10.2) 0.295 (7.5) 0.012 DSF050J123 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 1.800 DSF050J185 0.283 (7.2) 0.472 (12.0) 0.402 (10.2) 0.295 (7.5) 0.015 DSF050J153 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 2.200 DSF050J225 0.311 (7.9) 0.472 (12.0) 0.402 (10.2) 0.295 (7.5) 0.018 DSF050J183 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 100 Vdc 0.022 DSF050J223 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.010 DSF100J103 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.027 DSF050J273 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.012 DSF100J123 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.033 DSF050J333 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.015 DSF100J153 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.039 DSF050J393 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.018 DSF100J183 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.047 DSF050J473 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.022 DSF100J223 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.056 DSF050J563 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.027 DSF100J273 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.068 DSF050J683 0.126 (3.2) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.033 DSF100J333 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.082 DSF050J823 0.142 (3.6) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.039 DSF100J393 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.100 DSF050J104 0.157 (4.0) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.047 DSF100J473 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.120 DSF050J124 0.157 (4.0) 0.197 (5.0) 0.287 (7.3) 0.197 (5.0) 0.056 DSF100J563 0.126 (3.2) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.150 DSF050J154 0.173 (4.4) 0.217 (5.5) 0.287 (7.3) 0.197 (5.0) 0.068 DSF100J683 0.157 (4.0) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.180 DSF050J184 0.177 (4.5) 0.217 (5.5) 0.287 (7.3) 0.197 (5.0) 0.082 DSF100J823 0.161 (4.1) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.220 DSF050J224 0.189 (4.8) 0.217 (5.5) 0.287 (7.3) 0.197 (5.0) 0.100 DSF100J104 0.177 (4.5) 0.276 (7.0) 0.295 (7.5) 0.197 (5.0) 0.270 DSF050J274 0.181 (4.6) 0.276 (7.0) 0.287 (7.3) 0.197 (5.0) 0.120 DSF100J124 0.130 (3.3) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5) 0.330 DSF050J334 0.205 (5.2) 0.276 (7.0) 0.287 (7.3) 0.197 (5.0) 0.150 DSF100J154 0.130 (3.3) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5) 0.390 DSF050J394 0.224 (5.7) 0.287 (7.3) 0.287 (7.3) 0.197 (5.0) 0.180 DSF100J184 0.142 (3.6) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5) 0.470 DSF050J474 0.236 (6.0) 0.287 (7.3) 0.287 (7.3) 0.197 (5.0) 0.220 DSF100J224 0.157 (4.0) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5) 0.560 DSF050J564 0.228 (5.8) 0.394 (10.0) 0.287 (7.3) 0.197 (5.0) 0.270 DSF100J274 0.165 (4.2) 0.354 (9.0) 0.402 (10.2) 0.295 (7.5) 0.680 DSF050J684 0.256 (6.5) 0.394 (10.0) 0.287 (7.3) 0.197 (5.0) 0.330 DSF100J334 0.189 (4.8) 0.394 (10.0) 0.402 (10.2) 0.295 (7.5) 0.820 DSF050J824 0.268 (6.8) 0.394 (10.0) 0.287 (7.3) 0.197 (5.0) 0.390 DSF100J394 0.217 (5.5) 0.394 (10.0) 0.402 (10.2) 0.295 (7.5) 1.000 DSF050J105 0.315 (8.0) 0.433 (11.0) 0.287 (7.3) 0.197 (5.0) 0.470 DSF100J474 0.268 (6.8) 0.413 (10.5) 0.402 (10.2) 0.295 (7.5) CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com OBSOLETE 0.8 .05mm 0.5 1.0 10.27.3, 7.5Volts Rated Body Length (mm) Pulse Capability T maxL max Specifications Type DSF Polyester Capacitors DSF 050 J 223 C Dipped Nominal Voltage Capacitance Bulk and Ammo Stacked Capacitance Code Tolerance Packaging Options Film (First two digits are significant Blank = Straight lead, Bulk Type figures. Last digit is multiplier C = Crimped, Bulk to give cap in pF) 050 = 50 Vdc J = ±5% CA = Crimped Lead, Ammo Pack 100 = 100 Vdc 3 TA = Straight Lead, Ammo Pack e.g. 223 = 22 X 10 pF = .022 μF 4 104 = 10 X 10 pF = .100 μF 5 155 = 15 X 10 pF = 1.50 μFleailabvging akaape & Reel pacT. k Option (CA)acCrimped Lead Ammo PA)k Option (T Straight Lead Ammo Pac CDVWCDVW 050002 0001 0002 0001 0002 0001 Bulk Cut & Crimp Styles Crimp style depends on capacitor length.)mm( ) 0.50.5L ≤ L >10.0 mm ± ± )± CDVW± 05 ±001 ---± ± CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com OBSOLETE Max.20.5 + Hmax20.5 + HmaxHole (H2) Max. Case Top to Feed .24.04.0Diameter (Do) Feed Hole .516.0Height (Ho) Lead Wire Clinch H+5.0 .520.020.0Plane(H1) Height of SeatingH+4.5 .59.09.0(W1) H3 max. (mm) Feed Hole Position .518.018.0Carrier Width (W .212.712.7Feed Hole Pitch(Po) .112.712.7Capacitor Pitch (P) 10.0 mm +.8/-.2Lead Spacing (F) Lead Option (TAOption (CA) for Straightfor Crimped Tol.DimensionsDimensions AMMO PACK TAPING SPECIFICATIONS 0.27 - 0.47 0.12 - 0.22 0.082 - 0.1 1000 0.082 - 0.1 100 0.01 - 0.068100 20000.01 - 0.068 0.15 - 2.2 10000.15 to 1.0 50 0.01 - 0.12 20000.01 - 0.12 QuantityCapacitance Range QuantityCapacitance Range CRIMPED LEAD OPTION (CA) & (CR) STRAIGHT LEAD OPTION (TA) & (TR) PACKAGE QUANTITY FOR AMMO PACK PACKAGE QUANTITY FOR AMMO PACK Ammo Pack Options Contact us for detailed specs. Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required. 4 OBSOLETE AC