Chip and SMT Capacitors SPA Capacitors Solid Polymer Aluminum Surface Mount Capacitors New! Extended Range Ratings, 20% More Capacitance Highlights • Capacitance Range: 2.2 μF to 390 μF • Voltage Range: 2.0 Vdc to 16 Vdc • Ripple current ratings up to 3.5Arms • Solid electrolyte for extended life at 100 kHz and 105°C • Footprint Compatible with “D” and • Low Impedance “E” Case Tantalum • Ultra-Low E.S.R.; 10 mΩ @ 100 kHz • Flat Z and E.S.R. vs. temperature • -55° to 105°C operating temperature • Ignition free Filtering power of 3 or more tantalum chips and 50 year life Solid polymer aluminum capacitors combine the high capacitance make them ideal for bypassing high capacitance capability of an electrolytic component frequency noise, and for switching frequency filtering with the high frequency performance of film capacitors. in DC/ DC conversion. SPA capacitors are packaged in When the need for low impedance at high frequency is a molded resin case with the same footprint (7.3x4.3 critical for your design, one SPA chip is capable of mm) as the industry standard tantalum “D” and “E” replacing several liquid electrolyte aluminum or case sizes. The solid electrolyte results in a capacitor tantalum capacitors connected in parallel. This is due with stable impedance and equivalent series resistance to the ultra-low e.s.r. which results in significantly lower over the entire operating temperature range and they impedance than either aluminum or tantalum have more than twice the ripple current handling capacitors at frequencies of 100 kHz and above. There capability of tantalum capacitors. In addition, the is no longer a need to stack capacitors to lower the solid electrolyte delivers a typical expected operating impedance at high frequency. The low e.s.r. and high life of more than 50 years, and it is ignition free. CDE SPA Type ESRE ESRD ESRD ESRL CDE SPA Type ESRE ESRD ESRD ESRL ESRH* Dimensions (mm) 7.3x4.3x4.2 7.3x4.3x3.1 7.3x4.3x1.8 7.3x4.3x1.1 Dimensions (mm) 7.3x4.3x4.1 7.3x4.3x2.8 7.3x4.3x1.8 7.3x4.3x1.1 7.3x4.3x2.8 & 4.1 Capacitance Range (μF) 100 - 390 68 - 270 2.2 -120 15 - 68 Capacitance Range (µF) 100-390 68-270 2.2-120 15-68 68-270 Max. ESR at 100 kHz ( ) 0.015 0.018 .025 - .110 .035 - .040 Ω Max. ESR at 100 kHz (Ω) 0.015 0.018 .025 - .110 .035 - .040 .015 - .018 Max. Ripple Current at 100 kHz (Arms) 3.0 2.2 1.0 - 1.8 1.4 - 1.6 Max.Ripple Current at 100 kHz (Arms) 3.5 3.3 1.0 - 2.7 1.4 - 1.6 2.0 - 3.0 *Operates to 125 C ˚ 1605 East Rodney French Blvd. CORNELL New Bedford, MA 02744 DUBILIER (508) 996-8564, Fax (508) 996-3830 http://www.cornell-dubilier.com Your Source For Capacitor Solutions 1.035 E-mail: cdenb@cornell-dubilier.com SPA Capacitors Solid Polymer Aluminum Capacitors Applications Motherboard By-Pass Switching Supply Input/Output Filters Power Supply Decoupling High Frequency Noise Reduction Laptop LCD Displays Automotive Digital Equipment Portable Electronic Equipment Markings Polarity Stripe (Anode) Capacitance + ("R" = Decimal Point) W.V. Code D = 2.0 V K = 8.0 V E = 2.5 V B = 12.5 V G = 4.0 V C = 16.0 V Lot Code J = 6.3 V Ordering Information M ESRD 4R7 16 R PACKAGING CODE CDE R = Tape & Reel Type ESRD (1.8mm Ht.): 3500 pcs/ reel ESRD (2.8mm Ht.): 2000 pcs/ reel CAPACITANCE ESRE: 2000 pcs/reel ESRL: 3500 pcs/reel CODE B = Bulk Quantity 4R7 = 4.7 μF (100 pc multiples) 220 = 22 μF CAPACITANCE WVDC CODE 101 = 100 μF TOLERANCE 02 = 2.0 Vdc 08 = 8.0 Vdc M = ± 20% 0E = 2.5 Vdc 12 = 12.5 Vdc 04 = 4.0 Vdc 16 = 16.0 Vdc 06 = 6.3 Vdc 1605 East Rodney French Blvd. CORNELL New Bedford, MA 02744 (508) 996-8564, Fax (508) 996-3830 DUBILIER http://www.cornell-dubilier.com Your Source For Capacitor Solutions 1.036 E-mail: cdenb@cornell-dubilier.com Chip and SMT Capacitors Chip and SMT Capacitors SPA Capacitors Solid Polymer Aluminum Capacitors ESRD Surface Mount Outline Drawing Dimensions in mm Ratings 1 Part Maximum Maximum Case 1 Part Maximum Maximum Case Capacitance Number E.S.R Ripple Current Height Capacitance Number E.S.R Ripple Current Height (Tape & Reel) 100kHz/20°C 100kHz/105°C H (Tape & Reel) 100kHz/20°C 100kHz/105°C H (µF) (Ω) (Amps) (mm) (μF) (Ω) (Amps) ( ±0.1 mm ) 2.0 Vdc 2.0 Vdc 100 ESRD101M02R 0.025 1.8 1.8 ± .1 100 ESRD101M02R 0.025 1.8 1.8 120 ESRD121M02XR 0.015 2.7 1.8 ± .1 180 ESRD181M02R 0.018 2.2 3.1 180 ESRD181M02R 0.018 2.2 2.8 ± .2 220 ESRD221M02R 0.018 2.2 3.1 220 ESRD221M02R 0.018 2.2 2.8 ± .2 270 ESRD271M02XR 2.5 V 0.012 dc 3.3 2.8 ± .2 2.5 Vdc 82 ESRD820M0ER 0.025 1.8 1.8 82 ESRD820M0ER 0.025 1.8 1.8 ± .1 150 ESRD151M0ER 0.018 2.2 3.1 100 ESRD101M0EXR 0.015 2.7 1.8 ± .1 180 ESRD181M0ER 0.018 2.2 3.1 150 ESRD151M0ER 0.018 2.2 2.8 ± .2 4.0 Vdc 180 ESRD181M0ER 0.018 2.2 2.8 ± .2 56 ESRD560M04R 0.025 1.8 1.8 220 ESRD221M0EXR 0.012 3.3 2.8 ± .2 120 ESRD121M04R 0.018 2.2 3.1 4.0 Vdc 56 ESRD560M04R 0.025 1.8 1.8 ± .1 6.3 Vdc 82 ESRD820M04XR 0.015 2.7 1.8 ± .1 10 ESRD100M06R 0.060 1.0 1.8 120 ESRD121M04R 0.018 2.2 2.8 ± .2 22 ESRD220M06R 0.045 1.3 1.8 150 ESRD151M04XR 0.012 3.3 2.8 ± .2 33 ESRD330M06R 0.035 1.6 1.8 6.3 Vdc 47 ESRD470M06R 0.025 1.8 1.8 10 ESRD100M06R 0.060 1.0 1.8 ± .1 100 ESRD101M06R 0.018 2.2 3.1 22 ESRD220M06R 0.045 1.3 1.8 ± .1 33 ESRD330M06R 8.0 V 0.035 dc 1.6 1.8 ± .1 47 ESRD470M06R 0.025 1.8 1.8 ± .1 8.2 ESRD8R2M08R 0.060 1.0 1.8 68 ESRD680M06XR 0.015 2.7 1.8 ± .1 15 ESRD150M08R 0.045 1.3 1.8 100 ESRD101M06R 0.018 2.2 2.8 ± .2 22 ESRD220M08R 0.035 1.6 1.8 120 ESRD121M06XR 0.012 3.3 2.8 ± .2 33 ESRD330M08R 0.025 1.8 1.8 8.0 Vdc 68 ESRD680M08R 0.018 2.2 3.1 8.2 ESRD8R2M08R 0.060 1.0 1.8 ± .1 12.5 Vdc 15 ESRD150M08R 0.045 1.3 1.8 ± .1 22 ESRD220M08R 0.035 1.6 1.8 ± .1 4.7 ESRD4R7M12R 0.080 1.0 1.8 33 ESRD330M08R 0.025 1.8 1.8 ± .1 10 ESRD100M12R 0.060 1.0 1.8 68 ESRD680M08R 0.018 2.2 2.8 ± .2 15 ESRD150M12R 0.050 1.3 1.8 12.5 Vdc 22 ESRD220M12R 0.040 1.3 1.8 4.7 ESRD4R7M12R 0.080 1.0 1.8 ± .1 16.0 Vdc 10 ESRD100M12R 0.060 1.0 1.8 ± .1 2.2 ESRD2R2M16R 0.110 1.0 1.8 15 ESRD150M12R 0.050 1.3 1.8 ± .1 22 ESRD220M12R 0.040 1.3 1.8 ± .1 4.7 ESRD4R7M16R 0.080 1.0 1.8 6.8 ESRD6R8M16R 16.0 Vdc 0.070 1.0 1.8 2.2 ESRD2R2M16R 0.110 1.0 1.8 ± .1 8.2 ESRD8R2M16R 0.060 1.0 1.8 4.7 ESRD4R7M16R 0.080 1.0 1.8 ± .1 1 For other frequencies use the ripple current frequency multipliers. 6.8 ESRD6R8M16R 0.070 1.0 1.8 ± .1 8.2 ESRD8R2M16R 0.060 1.0 1.8 ± .1 1 For other frequencies use the ripple current frequency multipliers. 1605 East Rodney French Blvd. CORNELL New Bedford, MA 02744 DUBILIER (508) 996-8564, Fax (508) 996-3830 http://www.cornell-dubilier.com Your Source For Capacitor Solutions 1.037 E-mail: cdenb@cornell-dubilier.com SPA Capacitors Solid Polymer Aluminum Capacitors ESRE Surface Mount, High Capacitance Outline Drawing H = 4.1 ± .2 Dimensions in mm Ratings 1 Part Maximum Maximum 1 Part Maximum Maximum Capacitance Number E.S.R Ripple Current Capacitance Number E.S.R. Ripple Current (Tape & Reel) 100kHz/20°C 100kHz/105°C (Tape & Reel) 100kHz/20°C 100kHz/105°C (µF) (Ω) (Amps) (μF) (Ω) (Amps) 2.0 Vdc 270 ESRE271M02R 0.015 3.0 2.0 Vdc 330 ESRE331M02R 0.015 3.0 270 ESRE271M02R 0.015 3.0 390 ESRE391M02XR 0.010 3.5 330 ESRE331M02R 2.5 Vdc0.015 3.0 220 ESRE221M0ER 0.015 3.0 2.5 Vdc 270 ESRE271M0ER 0.015 3.0 220 ESRE221M0ER 0.015 3.0 330 ESRE331M0EXR 0.010 3.5 4.0 Vdc 270 ESRE271M0ER 0.015 3.0 180 ESRE181M04R 0.015 3.0 4.0 Vdc 220 ESRE221M04XR 0.010 3.5 180 ESRE181M04R 0.015 3.0 6.3 Vdc 150 ESRE151M06R 0.015 3.0 6.3 Vdc 180 ESRE181M06XR 0.010 3.5 150 ESRE151M06R 0.015 3.0 8.0 Vdc 8.0 Vdc 100 ESRE101M08R 0.015 3.0 1 For other frequencies use the ripple current frequency multipliers. 100 ESRE101M08R 0.015 3.0 1 For other frequencies use the ripple current frequency multipliers. 1605 East Rodney French Blvd. CORNELL New Bedford, MA 02744 (508) 996-8564, Fax (508) 996-3830 DUBILIER http://www.cornell-dubilier.com Your Source For Capacitor Solutions 1.038 E-mail: cdenb@cornell-dubilier.com Chip and SMT Capacitors Chip and SMT Capacitors SPA Capacitors Solid Polymer Aluminum Capacitors ESRL Surface Mount, Very Low Profile (1.1mm High) Outline Drawing Dimensions in mm Ratings 1 Part Maximum Maximum 1 Part Maximum Maximum Capacitance Number E.S.R Ripple Current Capacitance Number E.S.R. Ripple Current (Tape & Reel) 100kHz/20°C 100kHz/105°C (Tape & Reel) 100kHz/20°C 100kHz/105°C (µF) (Ω) (Amps) 2.0 Vdc (μF) (Amps) 68 ESRL680M02R 0.035 1.6 2.0 Vdc 2.5 Vdc 68 ESRL680M02R 0.035 1.6 56 ESRL560M0ER 0.035 1.6 4.0 Vdc 2.5 Vdc 39 ESRL390M04R 0.035 1.6 56 ESRL560M0ER 0.035 1.6 47 ESRL470M04R 0.035 1.6 6.3 Vdc 4.0 Vdc 33 ESRL330M06R 0.035 1.6 39 ESRL390M04R 0.035 1.6 8.0 Vdc 22 ESRL220M08R 6.3 Vdc 0.035 1.6 12.5 Vdc 33 ESRL330M06R 0.035 1.6 15 ESRL150M12R 0.040 1.4 8.0 Vdc 1 For other frequencies use the ripple current frequency multipliers. 22 ESRL220M08R 0.035 1.6 1 For other frequencies use the ripple current frequency multipliers. 1605 East Rodney French Blvd. CORNELL New Bedford, MA 02744 DUBILIER (508) 996-8564, Fax (508) 996-3830 http://www.cornell-dubilier.com Your Source For Capacitor Solutions 1.039 E-mail: cdenb@cornell-dubilier.com SPA Capacitors Solid Polymer Aluminum Capacitors Specifications Operating Temperature Range; Moisture Resistance; -55°C to +105°C, at 100% rated voltage After 500 hours storage at +60°C and 90 to 95% R.H. without load, the capacitor will meet the Surge Voltage; following limits: 125% of the rated working Vdc ΔC = +70%/-20% of the initial Capacitance Range; measured value (2.0 Vdc, 2.5 Vdc), 2.2 μF to 390 μF +60%/-20% of the initial measured value (4.0 Vdc), Capacitance Tolerance; +50%/-20% of the initial ±20% at 120 Hz and +20°C measured value (6.3 Vdc), +40%/-20% of the initial DC Leakage Current (DCL); measured value (all other voltages) After a two minute application of the rated DF ≤ two times the initial specified value working voltage at +20°C: DCL ≤ the initial specified value 2V - 4V: I ≤ 0.06CV Life Test; 6.3V - 16V: I ≤ 0.04CV or 3μA Apply rated DC working voltage at 105°C for (whichever greater) 1000 hours, and then stabilize them to +20°C. Dissipation Factor (DF); Capacitors will meet the following limits: The ratio of the capacitorís equivalent series ΔC = ±10% of the initial measured value resistance to its reactance at 120Hz and +20°C. ESRL & ESRD (1.8 mm ht.): D.F. is .06 Max. DF ≤ the initial specified value ESRE & ESRD (2.8 mm ht.): D.F. is .10 Max. DCL ≤ the initial specified value Resistance to Soldering Heat; Shelf Life Test; Heat the capacitors at 235°C in an oven for 200 Shelf life is typically 5 to 10 years. Accelerated seconds. The capacitors will meet the following test: after 500 hours at 105°C, capacitors will meet limits after stabilizing at 20°C: the following limits after stabilization at 20°C: ΔC = ±10% of the initial measured value ΔC = ±10% of the initial measured value DF ≤ the initial specified value DF ≤ the initial specified value DCL ≤ the initial specified value DCL ≤ the initial specified value Vibration; Shear Test; No abnormal change shall occur to capacitors that No damage shall be visible after subjecting a have been soldered (and attached) to a board when mounted capacitor to a side force of 5 N for 10 subjected to a vibration of 1.5 mm amplitude that seconds is varied from 10 Hz to 2000 Hz in 20 min. cycles. The test duration is 2 hours for each right angle direction (total 6 hours). Capacitance is monitored during the last cycle of the test for stablilty. 1605 East Rodney French Blvd. CORNELL New Bedford, MA 02744 (508) 996-8564, Fax (508) 996-3830 DUBILIER http://www.cornell-dubilier.com Your Source For Capacitor Solutions 1.040 E-mail: cdenb@cornell-dubilier.com Chip and SMT Capacitors