CORNELL DUBILIER LP470M400A1P3

Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors Stable ESR, Long Life, Snap-In Type LP radial snap-in aluminum electrolytic capacitors are small in size and are rated for low voltage applications. Their durable construction guarantees a long life while operating up to 105 ºC with a stable ESR. These features make the Type LP ideal for use in switch-mode power supplies. Highlights • High Reliability • 105 ºC • 22 to 35 mm diameter with 10 mm lead spacing Specifications Capacitance Range: 100 to 47,000 µF Voltage Range: 16 to 250 Vdc Capacitance tolerance: ±20% Operating Temperature Range: –40 ºC to +105 ºC Dissipation Factor: DF at 120 Hz, +25 ºC Vdc 16 25 - 35 50 - 63 100- 250 DF % 30 25 20 15 For values that are >1000 µF, the DF (%) increases 2% for every additional 1000 µF DC Leakage Test: I = .02CV C = capacitance in µF V = rated voltage I = leakage current in µA Voltage/Frequency Ripple Multipliers: Rated Ripple Multipliers Vdc 60 Hz 100 Hz 300 Hz 1000 Hz 10 kHz 100 kHz 10 to 50 0.90 1.00 1.03 1.05 1.10 1.10 63 to 100 0.85 1.00 1.07 1.13 1.19 1.20 160 to 250 0.80 1.00 1.15 1.25 1.35 1.40 Temperature Ripple Multipliers: Temperature Ripple Multiplier +85 ºC 1.65 +65 ºC 2.25 +45 ºC 2.55 The maximum ripple current at 105 ºC and 120 Hz are the Ratings Table. Adjust to other temperature and fre- quencies using the tables here. Load Life Test: 1,000 h @ full load at +105 ºC per EIA IS-749 Complies with the EU Directive ∆ Capacitance ±20% 2002/95/EC requirement restricting ESR 200% of limit the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium DCL 100% of limit (Cr(VI)), PolyBrominated Biphenyls Shelf Life: 500 h @ 105 ºC, capacitance, ≤200% ESR and (PBB) and PolyBrominated Diphenyl DC ±20%, initial requirements Ethers (PBDE). Vibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h in each plane CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors Part Numbering System LP 332 M 025 A1 P 3 Case Insulating Type Cap Tolerance Voltage Code Polarity Sleeve LP 821 = 820 µF M = ±20% 025 = 25 Vdc P = Polarized 3 = PVC or PET (PET for all Diameter Length mm (in) 332 = 3300 µF 250 = 250 Vdc date codes 25 30 35 40 45 50 103 = 10,000 µF after October mm (in) (1.00) (1.18) (1.38) (1.57) (1.77) (2.00) 2017) 22 (0.87) A1 A3 A5 A7 A4 A9 25 (1.00) C1 C3 C5 C7 C4 C9 30 (1.18) E1 E3 E5 E7 E4 E9 35 (1.38) H1 H3 H5 H7 H4 H9 Outline Drawing Ratings Max ESR Max Ripple Max ESR Max Ripple Catalog @ 120 Hz @ 120 Hz Size Size Catalog @ 120 Hz @ 120 Hz Size Size Cap Part Number +25 ºC +105 ºC (Inches) (mm) Cap Part Number +25 ºC +105 ºC (Inches) (mm) (µF) (Ω) (A) D L D L (µF) (Ω) (A) D L D L 16 Vdc; 20 Vdc Surge 35 Vdc; 44 Vdc Surge 4,700 LP472M016A1P3 0.141 1.20 0.866 0.984 22 25 1,800 LP182M035A1P3 0.188 1.040 0.866 0.984 22 25 5,600 LP562M016C1P3 0.120 1.43 0.984 0.984 25 25 2,700 LP272M035C1P3 0.155 1.257 0.984 0.984 25 25 8,200 LP822M016A5P3 0.081 1.82 0.866 1.378 22 35 3,900 LP392M035E1P3 0.108 1.571 1.181 0.984 30 25 12,000 LP123M016E3P3 0.055 2.38 1.181 1.181 30 30 5,600 LP562M035E3P3 0.074 2.050 1.181 1.181 30 30 15,000 LP153M016H3P3 0.046 3.00 1.378 1.181 35 30 6,800 LP682M035E5P3 0.060 2.286 1.181 1.378 30 35 22,000 LP223M016E7P3 0.030 3.53 1.181 1.575 30 40 6,800 LP682M035C7P3 0.061 2.320 0.984 1.575 25 40 27,000 LP273M016H7P3 0.025 4.27 1.378 1.575 35 40 8,200 LP822M035H3P3 0.051 2.690 1.378 1.181 35 30 33,000 LP333M016H9P3 0.020 5.00 1.378 1.969 35 50 10,000 LP103M035E7P3 0.041 3.000 1.181 1.575 30 40 47,000 LP473M016E9P3 0.020 6.80 1.181 1.969 30 50 12,000 LP123M035H7P3 0.035 3.590 1.378 1.575 35 40 25 Vdc; 32 Vdc Surge 15,000 LP153M035H9P3 0.028 4.000 1.378 1.969 35 50 2,700 LP272M025C1P3 0.180 1.000 0.984 0.984 25 25 50 Vdc; 63 Vdc Surge 3,300 LP332M025A1P3 0.151 1.160 0.866 0.984 22 25 1,200 LP122M050A1P3 0.280 0.860 0.866 0.984 22 25 3,300 LP332M025C1P3 0.150 1.143 0.984 0.984 25 25 1,500 LP152M050A1P3 0.225 0.983 0.866 0.984 22 25 4,700 LP472M025C1P3 0.106 1.480 0.984 0.984 25 25 2,200 LP222M050A5P3 0.151 1.330 0.866 1.378 22 35 5,600 LP562M025E1P3 0.090 1.857 1.181 0.984 30 25 2,200 LP222M050E1P3 0.150 1.429 1.181 0.984 30 25 5,600 LP562M025C3P3 0.089 1.730 0.984 1.181 25 30 3,300 LP332M050E3P3 0.101 1.760 1.181 1.181 30 30 6,800 LP682M025C5P3 0.073 1.940 0.984 1.378 25 35 3,300 LP332M050C5P3 0.101 1.710 0.984 1.378 25 35 10,000 LP103M025H3P3 0.050 3.333 1.378 1.181 35 30 3,300 LP332M050C3P3 0.101 1.710 0.984 1.181 25 30 12,000 LP123M025H3P3 0.041 2.970 1.378 1.181 35 30 3,900 LP392M050C7P3 0.085 1.970 0.984 1.575 25 40 15,000 LP153M025E7P3 0.033 3.360 1.181 1.575 30 40 4,700 LP472M050H3P3 0.071 2.270 1.378 1.181 35 30 22,000 LP223M025H9P3 0.023 4.857 1.378 1.969 35 50 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors Max ESR Max Ripple Max ESR Max Ripple Catalog @ 120 Hz @ 120 Hz Size Size Catalog @ 120 Hz @ 120 Hz Size Size Cap Part Number +25 ºC +105 ºC (Inches) (mm) Cap Part Number +25 ºC +105 ºC (Inches) (mm) (µF) (Ω) (A) D L D L 50 Vdc; 63 Vdc Surge (µF) (Ω) (A) D L D L 5,600 LP562M050H5P3 0.059 2.60 1.378 1.378 35 35 200 Vdc; 250 Vdc Surge 6,800 LP682M050E7P3 0.049 3.16 1.181 1.575 30 40 470 LP471M200E1P3 0.540 1.140 1.181 0.984 30 25 6,800 LP682M050E9P3 0.049 3.16 1.181 1.969 30 50 470 LP471M200H3P3 0.540 1.143 1.378 1.181 35 30 8,200 LP822M050H9P3 0.040 3.43 1.378 1.969 35 50 560 LP561M200H3P3 0.440 1.310 1.378 1.181 35 30 63 Vdc; 75 Vdc Surge 680 LP681M200E3P3 0.370 1.520 1.181 1.181 30 30 820 LP821M063A1P3 0.300 0.77 0.866 0.984 22 25 680 LP681M200E5P3 0.370 1.510 1.181 1.378 30 35 1,200 LP122M063C1P3 0.210 0.99 0.984 0.984 25 25 1,800 LP182M063A7P3 0.138 1.34 0.866 1.575 22 40 680 LP681M200H1P3 0.370 1.510 1.378 0.984 35 25 1,800 LP182M063E1P3 0.140 1.37 1.181 0.984 30 25 820 LP821M200H7P3 0.300 1.750 1.378 1.575 35 40 2,200 LP222M063E3P3 0.113 1.55 1.181 1.181 30 30 820 LP821M200H3P3 0.300 1.750 1.378 1.181 35 30 3,300 LP332M063H3P3 0.076 2.20 1.378 1.181 35 30 1,000 LP102M200H9P3 0.250 2.114 1.378 1.969 35 50 4,700 LP472M063E9P3 0.053 2.84 1.181 1.969 30 50 1,000 LP102M200H5P3 0.250 2.114 1.378 1.378 35 35 6,800 LP682M063H9P3 0.037 3.36 1.378 1.969 35 50 1200 LP122M200E9P3 0.165 2.810 1.181 1.969 30 50 100 Vdc; 125 Vdc Surge 1,200 LP122M200H5P3 0.165 2.740 1.378 1.378 35 35 820 LP821M100E1P3 0.3 0.98 1.181 0.984 30 25 1,500 LP152M200H4P3 0.134 3.330 1.378 1.772 35 45 2,200 LP222M100H7P3 0.113 2.03 1.378 1.575 35 40 2,700 LP272M100H9P3 0.092 2.32 1.378 1.969 35 50 1,800 LP182M200H9P3 0.112 3.800 1.378 1.969 35 50 2,700 LP272M100H7P3 0.092 2.32 1.378 1.575 35 40 250 Vdc; 300 Vdc Surge 200 Vdc; 250 Vdc Surge 100 LP101M250A1P3 2.500 0.410 0.866 0.984 22 25 150 LP151M200C1P3 1.650 0.509 0.984 0.984 25 25 150 LP151M250C1P3 1.660 0.540 0.984 0.984 25 25 150 LP151M200A1P3 1.650 0.509 0.866 0.984 22 25 180 LP181M250C3P3 1.400 0.686 0.984 1.181 25 30 180 LP181M200C1P3 1.400 0.571 0.984 0.984 25 25 220 LP221M250E1P3 1.130 0.710 1.181 0.984 30 25 220 LP221M200C1P3 1.100 0.646 0.984 0.984 25 25 270 LP271M250C3P3 0.922 0.840 0.984 1.181 25 30 220 LP221M200E1P3 1.100 0.646 1.181 0.984 30 25 330 LP331M250E3P3 0.750 0.914 1.181 1.181 30 30 220 LP221M200A3P3 1.130 0.660 0.866 1.181 22 30 270 LP271M200E1P3 0.920 0.790 1.181 0.984 30 25 390 LP391M250H3P3 0.640 1.090 1.378 1.181 35 30 270 LP271M200C3P3 0.920 0.790 0.984 1.181 25 30 470 LP471M250E7P3 0.530 1.260 1.181 1.575 30 40 330 LP331M200E3P3 0.750 0.886 1.181 1.181 30 30 470 LP471M250H1P3 0.530 1.260 1.378 0.984 35 25 390 LP391M200C5P3 0.640 0.980 0.984 1.378 25 35 560 LP561M250H3P3 0.347 1.800 1.378 1.181 35 30 470 LP471M200E5P3 0.540 1.143 1.181 1.378 30 35 680 LP681M250E9P3 0.370 1.920 1.181 1.969 30 50 680 LP681M250H5P3 0.370 2.070 1.378 1.378 35 35 820 LP821M250H7P3 0.243 2.400 1.378 1.575 35 40 1,000 LP102M250H4P3 0.200 2.720 1.378 1.772 35 45 1,200 LP122M250H9P3 0.165 3.100 1.378 1.969 35 50 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type LP 105 ºC Snap-In Aluminum Electrolytic Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com