CORNELL DUBILIER SH331M010ST

MALLORY SH Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors 2000 Hour Long Life, Aluminum Electrolytic Type SH is a radial leaded aluminum electrolytic ca- pacitor with a +105 ºC, 2000 hour long life rating. The SH is a high reliability product and is ideal for high quality applications that require long life in high tem- peratures environments. Highlights • +105 ºC • 2000 hours - long life • High reliability • Available in T&R and ammo pack Specifcations Capacitance Range: 1.0 to 4700 µF Voltage Range: 6.3 to 450 Vdc Capacitance Tolerance: ±20% Operating Temperature Range: –40 ºC to +105 ºC (–25 ºC for 160 to 450 Vdc) DC Leakage Current: After 2 minutes, 25 ºC at rated voltage 6.3 to 100 Vdc Complies with the EU Directive 2002/95/EC requirement restricting I = .01CV + 3 µA Max the use of Lead (Pb), Mercury (Hg), ≥ 160 Vdc after voltage applied for 3 minutes Cadmium (Cd), Hexavalent chromium I = .03CV + 10 µA Max (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl C = Capacitance in (µF) Ethers (PBDE). V = Rated voltage I = Leakage current in µA Dissipation Factor @ 120 Hz, +25 ºC: WV (V) 6.3 10 16 25 35 50 63 100 160-250 400-450 DF(%) 26 22 18 16 14 12 10 10 15 20 Above 1000 µF, the value of DF (%) is increased 2% for every additional 1000 µF Rated Ripple Multipliers Ripple Multipliers for Frequency and Temperature: WVDC 60Hz 120Hz 1kHz 10kHz 6 to 25 0.80 1.0 1.1 1.2 35 to 100 0.75 1.0 1.3 1.4 160 to 450 0.70 1.0 1.4 1.6 Ambient Ripple Temperature Multiplier +105 ºC 1.00 +85 ºC 1.50 +70 ºC 1.80 Load Life Test: Apply Rated WVDC for 2000 hours at +105 ºC Capacitance change within 20% of initial value DF not to exceed 200% of initial requirement DC Leakage current meets initial limits 1000 hrs @105 ºC with no voltage applied Shelf Life: Cap change within 20% of initial value DF ≤ 200% of initial requirements DC leakage current meets initial requirement CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Outline Drawing Outline Dimensions (Millimeters) PVC Sleeve S ˜0.5 d ˜0.05 + - L 15 Min. 5 D Case vented on Vinyl sleeve adds .5 Max. to diameter diameters 6.3 and greater and 2.0 Max. to length Part Numbering System SH 100 M 100 S T Capacitance Rated Lead Type Capacitance Tolerance Voltage Packaging Configuration (µF) (%) (Vdc) SH 1R0 = 1 K = ±10 6R3 = 6.3 A = Tape & Ammo 1 = Lead cut 100 = 10 M = ±20 010 = 10 E = Different Characteristic 2 = Lead form 101 = 100 100 = 100 R = Tape & Reel 4 = Lead crimp & cut (form) 102 = 1000 S = Standard T = Standard Temperature Characteristics 40 30 100 20 50 47˛F 100V 10 %˜DF 47˛F 100V %˜C 0 10 100˛F 160V 5 5 -10 100˛F 160V -20 1 -30 -40 0 40 80 120 -40 0 40 80 120 Temperature °C Temperature °C Capacitance Change Ratio Dissipation Factor Change Load Life Characteristics 100 10 20 50 %˜C 0 100˛F 160V %˜DF 15 470˛F 25V %˜LC -10 10 10 47˛F 100V -20 5 100˛F 160V 5 100˛F 160V 0 500 1000 1500 2000 47˛F 100V 0 500 1000 1500 2000 1 Time In Hours Time In Hours 0 500 1000 1500 2000 Capacitance Change Ratio Dissipation Factor Change Time In Hours Leakage Current Change CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com + Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Ratings Max Size in. (mm) ESR Ripple Current 120 120 Hz/ Diameter Length Lead Space Lead dia. Capacitance Catalog Hz/+25°C +105°C (D) (L) (S) (d) (uF) Part Number (ohms) (ma) 6.3 Vdc (8 Volts Surge) 47 SH470M6R3ST 7.34 65 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 100 SH101M6R3ST 3.45 100 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 220 SH221M6R3ST 1.57 165 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 330 SH331M6R3ST 1.04 200 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 470 SH471M6R3ST 0.73 280 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 1000 SH102M6R3ST 0.34 470 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 2200 SH222M6R3ST 0.17 930 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 3300 SH332M6R3ST 0.12 1100 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 4700 SH472M6R3ST 0.09 1320 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 10 Vdc (13 Volts Surge) 47 SH470M010ST 6.21 75 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 100 SH101M010ST 2.92 110 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 220 SH221M010ST 1.33 180 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 330 SH331M010ST 0.88 255 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 470 SH471M010ST 0.62 305 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 1000 SH102M010ST 0.29 570 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6) 2200 SH222M010ST 0.14 1010 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 3300 SH332M010ST 0.10 1220 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 4700 SH472M010ST 0.08 1410 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 16 Vdc (20 Volts Surge) 33 SH330M016ST 7.23 70 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 47 SH470M016ST 5.08 85 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 100 SH101M016ST 2.39 135 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 220 SH221M016ST 1.09 235 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 330 SH331M016ST 0.72 285 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 470 SH471M016ST 0.51 395 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 1000 SH102M016ST 0.24 700 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 2200 SH222M016ST 0.12 1150 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 3300 SH332M016ST 0.09 1350 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 4700 SH472M016ST 0.07 1560 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8) 25 Vdc (32 Volts Surge) 10 SH100M025ST 21.22 39 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 22 SH220M025ST 9.65 60 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 33 SH330M025ST 6.43 75 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 47 SH470M025ST 4.52 90 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 100 SH101M025ST 2.12 145 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 220 SH221M025ST 0.96 250 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 330 SH331M025ST 0.64 355 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 470 SH471M025ST 0.45 470 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6) 1000 SH102M025ST 0.21 855 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 2200 SH222M025ST 0.11 1230 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 3300 SH332M025ST 0.08 1450 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8) 4700 SH472M025ST 0.06 1690 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Ratings Max Size in. (mm) ESR Ripple Current 120 120 Hz/ Diameter Length Lead Space Lead dia. Capacitance Catalog Hz/+25°C +105°C (D) (L) (S) (d) (uF) Part Number (ohms) (ma) 35 Vdc (44 Volts Surge) 10 SH100M035ST 18.57 40 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 22 SH220M035ST 8.44 65 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 33 SH330M035ST 5.63 85 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 47 SH470M035ST 3.95 115 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 100 SH101M035ST 1.86 190 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 220 SH221M035ST 0.84 315 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 330 SH331M035ST 0.56 440 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6) 470 SH471M035ST 0.40 580 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 1000 SH102M035ST 0.19 995 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 2200 SH222M035ST 0.10 1450 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8) 3300 SH332M035ST 0.07 1660 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8) 50 Vdc (63 Volts Surge) 1 SH010M050ST 159.15 12 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 2.2 SH2R2M050ST 72.34 18 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 3.3 SH3R3M050ST 48.23 25 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 4.7 SH4R7M050ST 33.86 30 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 10 SH100M050ST 15.92 50 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 22 SH220M050ST 7.23 75 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 33 SH330M050ST 4.82 105 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 47 SH470M050ST 3.39 125 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 100 SH101M050ST 1.59 210 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 220 SH221M050ST 0.72 400 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6) 330 SH331M050ST 0.48 535 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 470 SH471M050ST 0.34 730 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 1000 SH102M050ST 0.16 1110 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 2200 SH222M050ST 0.08 1530 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8) 63 Vdc (79 Volts Surge) 4.7 SH4R7M063ST 28.22 34 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 10 SH100M063ST 13.26 55 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 22 SH220M063ST 6.03 90 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 33 SH330M063ST 4.02 110 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 47 SH470M063ST 2.82 155 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 100 SH101M063ST 1.33 260 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 220 SH221M063ST 0.60 460 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 330 SH331M063ST 0.40 650 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 470 SH471M063ST 0.28 800 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 1000 SH102M063ST 0.13 1200 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8) 100 Vdc (125 Volts Surge) 1 SH010M100ST 132.63 15 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 2.2 SH2R2M100ST 60.29 22 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 3.3 SH3R3M100ST 40.19 29 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 4.7 SH4R7M100ST 28.22 37 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 10 SH100M100ST 13.26 65 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 22 SH220M100ST 6.03 115 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Ratings Max ESR Ripple Current Size in. (mm) 120 120 Hz/ Diameter Length Lead Space Lead dia. Capacitance Catalog Hz/+25°C +105°C (D) (L) (S) (d) (uF) Part Number (ohms) (ma) 100 Vdc (125 Volts Surge) 33 SH330M100ST 4.02 160 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 47 SH470M100ST 2.82 210 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6) 100 SH101M100ST 1.33 385 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 220 SH221M100ST 0.60 590 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 330 SH331M100ST 0.40 720 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 470 SH471M100ST 0.28 875 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8) *160 Vdc (200 Volts Surge) 1 SH010M160ST 198.94 17 0.197 (5.0) 0.433 (11.0) 0.079 (2.0) 0.020 (0.5) 2.2 SH2R2M160ST 90.43 25 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 3.3 SH3R3M160ST 60.29 36 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 4.7 SH4R7M160ST 42.33 43 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 10 SH100M160ST 19.89 70 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 22 SH220M160ST 9.04 130 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 33 SH330M160ST 6.03 180 0.512 (13.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 47 SH470M160ST 4.23 270 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 100 SH101M160ST 1.99 330 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) *200 Vdc (250 Volts Surge) 1 SH010M200ST 198.94 17 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 2.2 SH2R2M200ST 90.43 25 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 3.3 SH3R3M200ST 60.29 36 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 4.7 SH4R7M200ST 42.33 50 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 10 SH100M200ST 19.89 80 0.394 (10.0) 0.630 (16.0) 0.197 (5.0) 0.024 (0.6) 22 SH220M200ST 9.04 140 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 33 SH330M200ST 6.03 190 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 47 SH470M200ST 4.23 220 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 100 SH101M200ST 1.99 335 0.630 (16.0) 1.26 (32.0) 0.295 (7.5) 0.031 (0.8) *250 Vdc (300 Volts Surge) 1 SH010M250ST 198.94 17 0.248 (6.3) 0.433 (11.0) 0.098 (2.5) 0.020 (0.5) 2.2 SH2R2M250ST 90.43 29 0.315 (8.0) 0.433 (11.0) 0.138 (3.5) 0.024 (0.6) 3.3 SH3R3M250ST 60.29 42 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 4.7 SH4R7M250ST 42.33 50 0.394 (10.0) 0.492 (12.5) 0.197 (5.0) 0.024 (0.6) 10 SH100M250ST 19.89 88 0.394 (10.0) 0.787 (20.0) 0.197 (5.0) 0.024 (0.6) 22 SH220M250ST 9.04 155 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 33 SH330M250ST 6.03 190 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) 47 SH470M250ST 4.23 230 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) 100 SH101M250ST 1.99 340 0.709 (18.0) 1.40 (36.0) 0.295 (7.5) 0.031 (0.8) *400 Vdc (450 Volts Surge) 22 SH220M400ST 12.06 110 0.630 (16.0) 0.984 (25.0) 0.295 (7.5) 0.031 (0.8) *450 Vdc (500 Volts Surge) 10 SH100M450ST 26.53 80 0.512 (13.0) 0.984 (25.0) 0.197 (5.0) 0.024 (0.6) * Over 160 Vdc the ripple is measured at 85 ºC CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Taping & Packaging Fig. 1 - Formed Taping Fig. 2 - Straight Taping (5Φ, 6.3Φ, 8Φ) P P h P P h 2 2 D D A A H1 H P P H 1 1 F F t t H 0 W W 0 W 0 W d d P D P D 0 0 0 0 Fig. 3- Straight Taping (Under 10Φ, 12Φ, 13Φ) Fig. 4- Straight Taping (16Φ, 18Φ) P P h P P h 2 2 D D A A F F P H 1 P H 1 t t W W 0 W 0 W d P D P d D 0 0 0 0 Standard Lead Spacing of Taped Components is 5mm Other Lead Spacing is Available by Special Order Code D A d P F W H t ih P P P W H D 0 1 2 0 0 0 Fig. +0.8 Tolerance 0.5 1.0 ±0.05 ±1.0 ±0.2 ±0.7 ±1.3 ±0.5 Min. ±0.75 ±0.5 ±0.2 ±0.2 Max. -0.2 4 ~ 6.3 7.0 0.45 12.7 12.7 3.85 6.35 5.0 18.0 12.5 18.5 16.0 4.0 0.7 2.0 1 5 ~ 8 12.5 0.5 12.7 12.7 3.85 6.35 5.0 18.0 12.5 18.5 16.0 4.0 0.7 2.0 5, 6.3 12.5 0.5 12.7 12.7 5.1 6.35 2.5 18.0 12.5 18.5 4.0 0.7 2.0 2 12.5 0.5 12.7 12.7 4.6 6.35 3.5 18.0 12.5 18.5 4.0 0.7 2.0 Item 8 10 21.0 0.6 12.7 12.7 3.85 6.35 5.0 18.0 12.5 18.5 4.0 0.7 2.0 3 12, 13 26.0 0.6 15.0 15.0 5.0 7.5 5.0 18.0 12.5 18.5 4.0 0.7 2.0 16, 18 26.0 0.8 30.0 15.0 3.75 7.5 7.5 18.0 12.5 18.0 4.0 0.7 2.0 4 Tape And Reel Quantities Capacitor Quantity Ammo Pack Box Ammo Pack Diameter Per Case Dimensions (mm) D Ammo Pack Box Diameter Reel Reel Qty. (mm) A±5 B Max C±3 D (mm) Width (Pcs.) 4 250 340 54 3000 4 44 1500 5 250 340 54 2,000 A 6.3 290 340 54 2,000 5 44 1200 8 250 340 54 1,000 6 44 1000 10 (12 L) 290 340 54 600 8 44 800 B C 10 (16 L) 350 340 59 600 10 (12L) 44 600 10 (20 L) 340 340 71 600 10 (16L) 50 600 Ammo Pack boxes are shipped 5 12, 13 340 340 71 400 12, 13 - - to the outer packing carton 16 340 340 71 300 16 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com Type SH 105 ºC Radial Leaded Aluminum Electrolytic Capacitors Notice and Disclaimer: All product drawings, descriptions, specifcations, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confrming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specifed by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com