Type SPSX Solid Polymer Aluminum SMT Capacitors The solid polymer SPSX aluminum capacitor is an ideal choice for audio/visual equipment, home appliances, computers, measuring equipment and industrial robots. Like the SPCX, the SPSX is a compact component. But SPSX offers a much lower ESR and a higher ripple current rating than the SPCX. The SPSX is a green product and RoHS compliant. Highlights Complies with the EU Directive 2002/95/EC • A low-profile height of 1.9 mm requirement restricting the use of Lead (Pb), • Offered on tape and reel Mercury (Hg), Cadmium (Cd), Hexavalent chro- • Can withstand 260 ºC reflow for 10 s mium (Cr(VI)), PolyBrominated Biphenyls (PBB) andPolyBrominated Diphenyl Ethers (PBDE). • 4.5 - 9 mΩ ESR @ 100 kHz • A great value in a small package Specifications Operating Temperature Range: –40 ºC to +105 ºC Capacitance Range: 82 µF to 560 µF Operating Working Range: 2.0, 2.5, 4.0, 6.3 Vdc Capacitance Tolerance: ±20 % (120 Hz @ 20 ºC) Surge Voltage: Vdc 2.0 2.5 4.0 6.3 Surge 2.5 3.1 5.0 8.0 Rated Ripple Current: See ratings table Life Test: Surge Test: Test temperature is +15 ºC to +35 ºC in series with Apply rated voltage at +105 ºC ±2 ºC for 1000 h a 1000 Ω resistor with the surge voltage applied for * Leakage current: ≤ ratings table values 1000 cycles of 30±5 s (ON) and 5 min 30 s (OFF) * Capacitance: ±10% of initial measured value • Leakage current: I≤0.1CV * DF: ≤ ratings table values • Capacitance: ±10% of initial measured value * Appearance: No abnormal change to occur • DF: ≤ the values in the ratings table Moisture Resistance: • Appearance: No abnormal change to occur +60 ºC ±2 ºC @ 90% RH; rated voltage for 500 h Vibration: * Leakage current: ≤ rating table values 10 Hz to 2000 Hz to 10 Hz frequency applied one * Capacitance: +70%, –20% (2V, 2.5V) cycle per 20 min at a total amplitude of 1.5 mm. +60%, –20% (4V) Direction and duration of vibration will be 2 h each in +50%, –20% (6.3V) the X,Y and Z planes for total of 6 h with the capacitor of initial measured value soldered in place. * DF: ≤200% of initial specified value • Appearance; No abnormal change to occur. * Appearance: No abnormal change to occur • Capacitance: Measured value to be stabilized Shelf Life Test: during test, when measured several times within 30 min before completion of test. +105 ºC ±2 ºC for 500 h Leakage current: ≤ rating table values Capacitance: ±10% of initial measured value DF: ≤ ratings table values Appearance: No abnormal change to occur CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type SPSX Solid Polymer Aluminum SMT Capacitors Outline Drawings + - H S S L W1 W2 W2 L (±0.2) W1 (±0.2) W2 (±0.1) H (±0.2) S (±0.3) Surface finish of terminal; Tin (Sn) 7.3 mm 4.3 mm 2.4 mm 1.9 mm 1.3 mm Marking W1 Polarity Stripe (Anode) Capacitance + W.V. Code d = 2.0 V Lot Code e = 2.5 V g = 4.0 V j = 6.3 V Part Numbering System SPSX 221 M 0E R -7 Type Capacitance Capacitance Voltage Code Packaging Optional Lower ESR Value at 100 Code Tolerance 02 = 2.0 Vdc Code kHz (see tables 820 = 82 M = ±20% 0E = 2.5 VDC R = Tape & Reel: for available op- 3500 pcs/reel 101 = 100 04 = 4.0 Vdc tions) 221 = 220 06 = 6.3 Vdc B = Bulk CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type SPSX Solid Polymer Aluminum SMT Capacitors Ratings Max. E.S.R. Max. Ripple Current Capacitance Catalog Max. D.F. Max. DCL @100kHz/+20°C @ 100kHz/(+20°C to +105°C) (µF) Part Number @ 120 Hz (µA) (mΩ) (Arms) 2.0 Vdc (Surge 2.5 Vdc) 180 SPSX181M02R 0.06 36 9 3 220 SPSX221M02R 0.06 44 9 3 270 SPSX271M02R 0.06 54 9 3 270 SPSX271M02R-6 0.06 54 6 3.5 270 SPSX271M02R-4 0.06 54 4.5 3.8 330 SPSX331M02R 0.06 66 9 3 330 SPSX331M02R-6 0.06 66 6 3.5 330 SPSX331M02R-4 0.06 66 4.5 3.8 390 SPSX391M02R 0.06 78 9 3 390 SPSX391M02R-6 0.06 78 6 3.5 390 SPSX391M02R-4 0.06 78 4.5 4 470 SPSX471M02R 0.06 94 9 3 470 SPSX471M02R-6 0.06 94 6 3.5 470 SPSX471M02R-4 0.06 94 4.5 4 560 SPSX561M02R-4 0.06 112 4.5 4 2.5 Vdc (Surge 3.1 Vdc) 150 SPSX151M0ER 0.06 37.5 9 3 180 SPSX181M0ER 0.06 45 9 3 220 SPSX221M0ER 0.06 55 9 3 220 SPSX221M0ER-7 0.06 55 7 3.5 270 SPSX271M0ER-7 0.06 67.5 7 3.5 330 SPSX331M0ER 0.06 82.5 9 3 330 SPSX331M0ER-6 0.06 82.5 6 3.5 330 SPSX331M0ER-4 0.06 82.5 4.5 4 390 SPSX391M0ER 0.06 97.5 9 3 390 SPSX391M0ER-6 0.06 97.5 6 3.5 390 SPSX391M0ER-4 0.06 97.5 4.5 4 470 SPSX471M0ER 0.06 117.5 9 3 470 SPSX471M0ER-6 0.06 117.5 6 3.5 470 SPSX471M0ER-4 0.06 117.5 4.5 4 4.0 Vdc (Surge 5.0 Vdc) 82 SPSX820M04R 0.06 32.8 9 3 100 SPSX101M04R 0.06 40 9 3 150 SPSX151M04R 0.06 60 9 3 150 SPSX151M04R-7 0.06 60 7 3.5 180 SPSX181M04R 0.06 72 9 3 220 SPSX221M04R 0.06 88 9 3 6.3 Vdc (Surge 8.0 Vdc) 120 SPSX121M06R-7 0.06 75.6 7 3.5 150 SPSX151M06R 0.06 94.5 9 3 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type SPSX Solid Polymer Aluminum SMT Capacitors Reflow Soldering Profile Temperature on Surface of Capacitor Maximum of 10 seconds at Peak Temperature 260 ºC -------------- 230 ºC -------------------------------------------- Time at or above 230 ºC 120 seconds max. Peak Temp. Time in 230 ºC or more 260 ºC, 10 s max. 40 s max. 250 ºC, 10 s max. 60 s max. Time (Seconds) Time At or Above 230 ºC Time (Seconds) Time (Seconds) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com OBSOLETE Peak Temperature ºC Temperature ºC Type SPSX Solid Polymer Aluminum SMT Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com OBSOLETE