CORNELL DUBILIER TC692

Type TC Axial Leaded Aluminum Electrolytic Capacitors 85 ºC, High Ripple, General Purpose Capacitor Type TC is an axial leaded, 85 ºC, 1000 hour long life general purpose aluminum electrolytic capac- itor with a high ripple current rating and is suit- able for consumer electronic equipment applica- tions. Highlights • General purpose • High ripple current • Low profile mounting Specifications Capacitance Range: 1.0 to 5,000 µF Voltage Range: 16 to 450 WVdc Capacitance Tolerance: Dia.< .625, ±20% Dia.≥ .625 16 to 150 WVdc, –10 +75% 250 to 450 WVdc, –10 +50% Operating Temperature Range: –40 ºC to 85 ºC DC Leakage Current: I = 6 √CV after 5 minutes, not to exceed 3 mA @ 25 ºC I = leakage current in µA C = Capacitance in µF V = Rated voltage Ripple Current Multipliers: Rated Ripple Multipliers WVdc 60 Hz 400 Hz 1000 Hz 2400 Hz 0 to 50 0.8 1.05 1.10 1.14 51 to 150 0.8 1.08 1.13 1.16 151 & up 0.8 1.15 1.21 1.25 Ambient Temp. +45 ºC +55 ºC +65 ºC +75 ºC +85 ºC Ripple Multiplier 2.2 2.0 1.7 1.4 1.0 QA Stability Test: Apply WVdc for 1,000 h at 85 ºC • Capacitance change ≤15% from initial limits • DC leakage current meets initial limits • ESR ≤150% of initial measured value Outline Drawing Parts are supplied with PVC insulating sleeve. Add .010” to diameter and .125” max to length to allow for insulation. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde. OBSOLETE Type TC Axial Leaded Aluminum Electrolytic Capacitors Ratings Max ESR Max Ripple Size Max ESR Max Ripple Size 120 Hz 120 Hz Diameter Length Lead 120 Hz 120 Hz Diameter Length Lead Cap Catalog 25 ºC 85 ºC D L Wire Cap Catalog 25 ºC 85 ºC D L Wire (µF) Part Number (Ω) (A) (Inches) (Inches) (d) (µF) Part Number (Ω) (A) (Inches) (Inches) (d) 16 WVdc ( 20 Vdc Surge ) 250 WVdc ( 300 Vdc Surge ) 3,000 TC1530 0.11 2.066 0.875 1.625 0.040 20 TC55 6.13 0.345 0.750 1.125 0.040 4,000 TC1540 0.08 2.518 0.875 1.875 0.040 20 TC55A 15.10 0.175 0.512 1.181 0.023 4,000 TC1540A 0.07 1.450 0.866 1.575 0.023 30 TC57 4.09 0.461 0.750 1.375 0.040 5,000 TC1550 0.07 3.217 0.875 2.625 0.040 30 TC57A 10.10 0.241 0.630 1.181 0.023 40 TC58 2.69 0.573 0.750 1.625 0.040 25 WVdc ( 30 Vdc Surge ) 40 TC58A 8.58 0.280 0.630 1.299 0.023 470 TC2505A 0.38 0.550 0.394 0.787 0.023 50 TC59 2.15 0.640 0.750 1.625 0.040 1,500 TC2515 0.14 1.881 0.750 2.125 0.040 50 TC59A 7.06 0.318 0.630 1.299 0.023 1,500 TC2515A 0.12 1.225 0.709 1.575 0.023 100 TC1265 1.08 1.220 0.875 2.625 0.040 2,000 TC2520 0.11 2.204 0.875 1.875 0.040 100 TC1265A 3.32 0.555 0.866 1.575 0.023 2,000 TC2520A 0.09 1.350 0.866 1.575 0.023 160 TC1266 0.30 1.649 1.000 2.625 0.040 3,000 TC2530 0.07 3.108 0.875 2.625 0.040 225 TC1267 0.22 2.105 1.000 3.125 0.040 4,000 TC2540 0.06 3.779 1.000 2.625 0.040 4,000 TC2540A 0.07 1.450 0.866 1.575 0.023 300 WVdc ( 350 Vdc Surge ) 5,000 TC2550 0.05 4.136 1.000 2.625 0.040 150 TC593 0.36 1.624 1.000 3.125 0.040 200 TC594 0.28 1.865 1.000 3.125 0.040 50 WVdc ( 65 Vdc Surge ) 22 TC36A 6.09 0.073 0.236 0.630 0.023 350 WVdc ( 400 Vdc Surge ) 47 TC39A 3.14 0.130 0.315 0.630 0.023 5 TC60 30.48 0.139 0.625 1.125 0.032 1,000 TC50100 0.08 2.949 0.875 2.625 0.040 8 TC61 19.05 0.193 0.625 1.375 0.032 1,000 TC50100A 0.12 1.447 0.866 1.575 0.023 8 TC61A 33.20 0.089 0.512 0.827 0.023 1,500 TC50150 0.07 3.423 1.000 2.625 0.040 10 TC62 15.25 0.215 0.625 1.375 0.032 2,000 TC50200 0.07 3.448 1.000 2.625 0.040 10 TC62A 33.20 0.089 0.512 0.827 0.023 2,000 TC50200A 0.09 1.350 0.866 1.575 0.023 12 TC63 12.71 0.239 0.750 1.125 0.040 3,000 TC50300 0.05 4.766 1.000 3.625 0.040 16 TC64 9.54 0.302 0.750 1.375 0.040 5,000 TC50500 0.03 5.820 1.000 3.625 0.040 20 TC65 7.63 0.337 0.750 1.375 0.040 5,000 TC50500A 0.56 3.305 0.866 1.575 0.023 20 TC65A 15.10 0.175 0.512 1.181 0.023 40 TC67 3.96 0.514 0.875 1.625 0.040 75 WVdc ( 95 Vdc Surge ) 60 TC68 2.78 0.691 0.875 2.125 0.040 100 TC75101 0.77 0.597 0.625 1.375 0.040 60 TC68A 6.44 0.376 0.709 1.575 0.023 100 TC75101A 2.66 0.270 0.512 1.181 0.023 100 TC69 1.35 1.093 0.875 2.625 0.040 250 TC75251 0.37 1.024 0.750 1.625 0.040 100 TC69A 3.32 0.555 0.866 1.575 0.023 500 TC75501 0.19 1.765 0.875 2.125 0.040 150 TC692 0.96 1.495 1.000 3.625 0.040 1,000 TC75102 0.10 2.344 1.000 1.625 0.040 2,000 TC75202 0.05 3.991 1.000 2.625 0.040 450 WVdc ( 525 Vdc Surge ) 2 TC695 86.91 0.082 0.625 1.125 0.032 100 WVdc ( 125 Vdc Surge ) 2 TC695A 151.00 0.030 0.315 0.787 0.023 100 TC10101 0.36 0.974 0.750 1.375 0.040 4 TC697 43.47 0.116 0.625 1.125 0.032 100 TC10101A 3.32 0.419 0.630 1.299 0.023 4 TC697A 70.60 0.051 0.394 0.984 0.023 150 TC10151 0.55 1.276 0.750 1.625 0.040 5 TC70 35.86 0.144 0.750 1.125 0.040 150 TC10151A 1.34 0.823 0.709 1.575 0.023 5 TC70A 70.60 0.051 0.394 0.984 0.023 250 TC10251 0.15 1.885 0.875 1.875 0.040 8 TC71 21.74 0.183 0.750 1.125 0.040 500 TC10501 0.08 3.251 1.000 2.625 0.040 8 TC71A 33.20 0.089 0.512 0.827 0.023 1,000 TC10102 0.08 3.918 1.000 3.875 0.040 10 TC72 17.39 0.243 0.875 1.375 0.040 1,000 TC10102A 0.12 1.447 0.866 1.575 0.023 10 TC72A 33.20 0.089 0.512 0.827 0.023 1,500 TC10152 0.06 4.495 1.000 3.625 0.040 12 TC73 14.50 0.267 0.875 1.375 0.040 150 WVdc ( 175 Vdc Surge ) 16 TC74 10.88 0.304 0.750 1.625 0.040 80 TC492 1.96 0.670 0.750 1.625 0.040 16 TC74A 24.15 0.140 0.512 0.984 0.023 100 TC493 0.70 0.748 0.750 1.625 0.040 20 TC75 8.71 0.371 0.875 1.625 0.040 100 TC493A 3.32 0.555 0.709 1.575 0.023 20 TC75A 15.10 0.175 0.512 1.181 0.023 150 TC495 0.47 0.993 0.875 1.625 0.040 30 TC77 5.82 0.488 1.000 1.625 0.040 200 TC496 0.35 1.293 0.875 2.125 0.040 30 TC77A 10.10 0.241 0.630 1.181 0.023 300 TC499 0.355 1.687 1.000 2.125 0.040 40 TC78 4.36 0.653 1.000 2.125 0.040 500 TC4990 0.15 2.362 1.000 2.625 0.040 40 TC78A 8.58 0.280 0.630 1.299 0.023 250 WVdc ( 300 Vdc Surge ) 50 TC79 3.06 0.709 1.000 2.125 0.040 5 TC50XA 70.60 0.060 0.394 0.787 0.023 50 TC79A 7.06 0.318 0.630 1.299 0.023 60 TC795 2.55 0.855 1.000 2.625 0.040 8 TC51 15.27 0.197 0.625 1.125 0.032 80 TC80 2.19 1.068 1.000 3.125 0.040 10 TC52 12.22 0.220 0.625 1.125 0.032 80 TC80A 3.32 0.555 0.866 1.575 0.023 10 TC52A 33.20 0.890 0.394 0.984 0.023 100 TC807 1.97 1.178 1.000 3.125 0.040 12 TC53 8.65 0.262 0.625 1.125 0.032 100 TC807A 3.32 0.555 0.866 1.575 0.023 16 TC54 7.64 0.304 0.625 1.375 0.032 CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com OBSOLETE Type TC Axial Leaded Aluminum Electrolytic Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde. OBSOLETE